The effective utilization of steel slag, a byproduct produced in large quantities from the steel refining process, is an important issue. Because steel slag contains abundant mineral components, the effects of steel s...The effective utilization of steel slag, a byproduct produced in large quantities from the steel refining process, is an important issue. Because steel slag contains abundant mineral components, the effects of steel slag on soil bacterial biomass and plant mineral uptake were analyzed in this study. The soil pH increased in proportion to the amount of steel slag added. A lower concentration (0.2% to 1%) of steel slag addition did not change the bacterial biomass. However, a higher concentration of steel slag (above 1%) had a negative effect on bacterial biomass. A lower amount of steel slag (0.2% to 1%) addition in soil leads to increased mineral (Ca, Mg, and Fe) uptake and plant growth in Brassica rapa var. periviridis and Spinacia oleracea L. However, mineral uptake by the plants decreased when a large amount of steel slag (above 1%) was added to the soil. Low concentrations of steel slag (0.2% to 1%) in soil had positive effects on plant growth, mineral uptake of plants, and bacterial biomass.展开更多
We observe surface plasmon polariton （SPP） refraction on a metal heterostructured sample with a scattered-type scanning near-field optical microscope （SNOM）. The sample consists of AI and Au in-plane whose boundar...We observe surface plasmon polariton （SPP） refraction on a metal heterostructured sample with a scattered-type scanning near-field optical microscope （SNOM）. The sample consists of AI and Au in-plane whose boundary is smooth enough with proper etching time. SPPs excited on the AI film travel to the boundary and a portion of SPPs propagates into the Au film. In addition, interference fringes appear in the SNOM image bent at the boundary. The result is analysed with effective index method and the refracted angle is explained by Shell＇s law.展开更多
In-situ impedance spectroscopy (IS) observations of the photoconductivity of the carriers induced by photo-irradiation in organic hetero-junction structured photovoltaic devices are presented. In the IS measurements, ...In-situ impedance spectroscopy (IS) observations of the photoconductivity of the carriers induced by photo-irradiation in organic hetero-junction structured photovoltaic devices are presented. In the IS measurements, the externally applied voltage and the dependence of the light intensity applied to the device were investigated. Analysis of the frequency characteristics which was measured by changing the light intensity shows there is a proportional relationship between the changes in the conductivities of the two components. The mobilities of the CuPc and C60 layers were calculated from the conductivities and were in the orders of 10﹣4 and 10﹣3 cm2/Vs, respectively.展开更多
The carrier dynamics in organic photovoltaic (OPV) cells were investigated by impedance spectroscopy. We introduced a novel impedance spectrum representation called dynamic modulus plot (DMP), which allowed us to obse...The carrier dynamics in organic photovoltaic (OPV) cells were investigated by impedance spectroscopy. We introduced a novel impedance spectrum representation called dynamic modulus plot (DMP), which allowed us to observe the layer-to-layer carrier injection behavior graphically. In this work, the impedance responses were characterized in the N,N’-diphenyl-N,N’-di-m-tolyl- 4,4’-diaminobiphenyl (TPD)/C60 p-n heterostructured OPV cells against applied voltages. The dependence of impedance responses on the layer thickness revealed a constant internal electric field that disturbed the carrier transport within the OPV cells. We applied this technique to new donor materials, in which thiophene units were inserted to the center of TPD. By increasing the number of thiophene units in TPD the fill-factor (FF) improved from 33% to 59%, which increased the power conversion efficiency (PCE). Based on the DMP analysis, we assigned the improvement in device performance to the reduction of the internal electric field.展开更多
文摘The effective utilization of steel slag, a byproduct produced in large quantities from the steel refining process, is an important issue. Because steel slag contains abundant mineral components, the effects of steel slag on soil bacterial biomass and plant mineral uptake were analyzed in this study. The soil pH increased in proportion to the amount of steel slag added. A lower concentration (0.2% to 1%) of steel slag addition did not change the bacterial biomass. However, a higher concentration of steel slag (above 1%) had a negative effect on bacterial biomass. A lower amount of steel slag (0.2% to 1%) addition in soil leads to increased mineral (Ca, Mg, and Fe) uptake and plant growth in Brassica rapa var. periviridis and Spinacia oleracea L. However, mineral uptake by the plants decreased when a large amount of steel slag (above 1%) was added to the soil. Low concentrations of steel slag (0.2% to 1%) in soil had positive effects on plant growth, mineral uptake of plants, and bacterial biomass.
文摘We observe surface plasmon polariton （SPP） refraction on a metal heterostructured sample with a scattered-type scanning near-field optical microscope （SNOM）. The sample consists of AI and Au in-plane whose boundary is smooth enough with proper etching time. SPPs excited on the AI film travel to the boundary and a portion of SPPs propagates into the Au film. In addition, interference fringes appear in the SNOM image bent at the boundary. The result is analysed with effective index method and the refracted angle is explained by Shell＇s law.
文摘In-situ impedance spectroscopy (IS) observations of the photoconductivity of the carriers induced by photo-irradiation in organic hetero-junction structured photovoltaic devices are presented. In the IS measurements, the externally applied voltage and the dependence of the light intensity applied to the device were investigated. Analysis of the frequency characteristics which was measured by changing the light intensity shows there is a proportional relationship between the changes in the conductivities of the two components. The mobilities of the CuPc and C60 layers were calculated from the conductivities and were in the orders of 10﹣4 and 10﹣3 cm2/Vs, respectively.
文摘The carrier dynamics in organic photovoltaic (OPV) cells were investigated by impedance spectroscopy. We introduced a novel impedance spectrum representation called dynamic modulus plot (DMP), which allowed us to observe the layer-to-layer carrier injection behavior graphically. In this work, the impedance responses were characterized in the N,N’-diphenyl-N,N’-di-m-tolyl- 4,4’-diaminobiphenyl (TPD)/C60 p-n heterostructured OPV cells against applied voltages. The dependence of impedance responses on the layer thickness revealed a constant internal electric field that disturbed the carrier transport within the OPV cells. We applied this technique to new donor materials, in which thiophene units were inserted to the center of TPD. By increasing the number of thiophene units in TPD the fill-factor (FF) improved from 33% to 59%, which increased the power conversion efficiency (PCE). Based on the DMP analysis, we assigned the improvement in device performance to the reduction of the internal electric field.
