In order to improve the fuel consumption and exhaust emission for gasoline engines,gasoline direct injection(GDI) system is spotlighted to solve these requirements.Thus,many researchers focus on the investigation of...In order to improve the fuel consumption and exhaust emission for gasoline engines,gasoline direct injection(GDI) system is spotlighted to solve these requirements.Thus,many researchers focus on the investigation of spray characteristics and the fuel formation of GDI injector.This paper presents a complete numerical and experimental characterization of transient gasoline spray from a high pressure injection system equipped with a modern single-hole electric controlled injector in a pressurized constant volume vessel.The numerical analysis is carried out in a one-dimensional model of fuel injection system which is developed in the AVL HYDSIM environment.The experimental analyses are implemented through a self-developed injection rate measurement device and spray evolution visualization system.The experimental results of injection rate and spray dynamics are taken to tune and validate the built model.The visualization system synchronize a high speed CMOS camera to obtain the spray structure,moreover,the captured images are taken to validate the injector needle lift process which is simulated in the model.The reliability of the built model is demonstrated by comparing the numerical results with the experimental data.The formed vortex structure at 0.8 ms is effectively disintegrated at 6.2 ms and the spray dynamics become rather chaotic.The fuel flow characteristics within injector nozzle extremely influence the subsequent spray evolution,and therefore this point should be reconsidered when building hybrid breakup GDI spray model.The spray tip speed reach the maximum at 1.18 ms regardless of the operation conditions and this is only determined by the injector itself.Furthermore,an empirical equation for the spray tip penetration is obtained and good agreement with the measured results is reached at a certain extent.This paper provides a methodology for the investigation of spray behavior and fuel distribution of GDI engine design.展开更多
Safety is one of the key issues arising from automotive industry moving toward information technology,integration,automation,networking and intelligence.As automotive electronic control systems are more and more compl...Safety is one of the key issues arising from automotive industry moving toward information technology,integration,automation,networking and intelligence.As automotive electronic control systems are more and more complex,and new functionalities increasingly touch the domain of system safety engineering,risks from systematic failures and random hardware failures increase gradually.GB/T 34590-2017。展开更多
The electromagnetic compatibility of electric vehicles is not only the important technology issue in researches,development and industrialization of electric vehicles,but also the key research area of ISO.In this pape...The electromagnetic compatibility of electric vehicles is not only the important technology issue in researches,development and industrialization of electric vehicles,but also the key research area of ISO.In this paper,both national and international standards of electromagnetic compatibility of electric vehicles are analyzed;it is also suggested that our standards of electromagnetic compatibility of electric vehicles be improved from several aspects such as testing items,test procedures,limit value,etc.The electromagnetic environment of electric vehicles is analyzed in terms of interfering sources,providing the solutions to electromagnetic compatibility and measures of reducing electromagnetic interference.Advanced equipments introduced into Chinese electromagnetic compatibility testing laboratories accelerate the pace of the researches on related technologies and standards;China will develop the standards system which covers from the complete electric vehicle to the key components,promote the technology improvement and industrialization work of Chinese electric vehicles,transform the latest achievements and advanced experiences of Chinese electric vehicles industry to the related standards and contribute the development of international standards.展开更多
基金supported by China First Auto Works Group Corporation R&D Center Program (Grant No. 56067028)
文摘In order to improve the fuel consumption and exhaust emission for gasoline engines,gasoline direct injection(GDI) system is spotlighted to solve these requirements.Thus,many researchers focus on the investigation of spray characteristics and the fuel formation of GDI injector.This paper presents a complete numerical and experimental characterization of transient gasoline spray from a high pressure injection system equipped with a modern single-hole electric controlled injector in a pressurized constant volume vessel.The numerical analysis is carried out in a one-dimensional model of fuel injection system which is developed in the AVL HYDSIM environment.The experimental analyses are implemented through a self-developed injection rate measurement device and spray evolution visualization system.The experimental results of injection rate and spray dynamics are taken to tune and validate the built model.The visualization system synchronize a high speed CMOS camera to obtain the spray structure,moreover,the captured images are taken to validate the injector needle lift process which is simulated in the model.The reliability of the built model is demonstrated by comparing the numerical results with the experimental data.The formed vortex structure at 0.8 ms is effectively disintegrated at 6.2 ms and the spray dynamics become rather chaotic.The fuel flow characteristics within injector nozzle extremely influence the subsequent spray evolution,and therefore this point should be reconsidered when building hybrid breakup GDI spray model.The spray tip speed reach the maximum at 1.18 ms regardless of the operation conditions and this is only determined by the injector itself.Furthermore,an empirical equation for the spray tip penetration is obtained and good agreement with the measured results is reached at a certain extent.This paper provides a methodology for the investigation of spray behavior and fuel distribution of GDI engine design.
文摘Safety is one of the key issues arising from automotive industry moving toward information technology,integration,automation,networking and intelligence.As automotive electronic control systems are more and more complex,and new functionalities increasingly touch the domain of system safety engineering,risks from systematic failures and random hardware failures increase gradually.GB/T 34590-2017。
文摘The electromagnetic compatibility of electric vehicles is not only the important technology issue in researches,development and industrialization of electric vehicles,but also the key research area of ISO.In this paper,both national and international standards of electromagnetic compatibility of electric vehicles are analyzed;it is also suggested that our standards of electromagnetic compatibility of electric vehicles be improved from several aspects such as testing items,test procedures,limit value,etc.The electromagnetic environment of electric vehicles is analyzed in terms of interfering sources,providing the solutions to electromagnetic compatibility and measures of reducing electromagnetic interference.Advanced equipments introduced into Chinese electromagnetic compatibility testing laboratories accelerate the pace of the researches on related technologies and standards;China will develop the standards system which covers from the complete electric vehicle to the key components,promote the technology improvement and industrialization work of Chinese electric vehicles,transform the latest achievements and advanced experiences of Chinese electric vehicles industry to the related standards and contribute the development of international standards.