Superior long-term anchorage of the bridging stent-grafts from the fenestrated main body endograft could be achieved with the addition of a flared cuff,capable of preventing the previously observed fabric fraying arou...Superior long-term anchorage of the bridging stent-grafts from the fenestrated main body endograft could be achieved with the addition of a flared cuff,capable of preventing the previously observed fabric fraying around the fenestration as a result of the balloon angioplasty of the seal zone.This novel stent cuff design will also facilitate more complete biointegration of the devices,eliminate the hemodynamic variation as well as significantly reduce the possibility of a Type III endoleak.The feasibility of this concept is demonstrated by observations made from in-situ tests performed in a Beta endograft design.Flared cuffs made of poly(ε-caprolactone)supported with a weft-knitted polyester structure can be manufactured with various configurations to optimize the transition from the main body of the endograft,thus preventing the currently marketed designs’hemodynamic perturbation while also promoting endograft biointegration.This concept represents an evolution in branch graft design,which may enhance the long-term durability of customized fenestrations and open new applications for in-vivo graft fenestration in the near future.Further ongoing investigation to optimize its structure,X-ray opacity,fixation to the flared stent,and material biocompatibility are still required to build upon this concept’s proof.展开更多
In this exploratory work,micrometric radiopaque W-Fe-Mn-C coatings were produced by magnetron sputtering plasma deposition,for the first time,with the aim to make very thin Fe-Mn stents trackable by fluoroscopy.The po...In this exploratory work,micrometric radiopaque W-Fe-Mn-C coatings were produced by magnetron sputtering plasma deposition,for the first time,with the aim to make very thin Fe-Mn stents trackable by fluoroscopy.The power of Fe-13Mn-1.2C target was kept constant at 400 W while that of W target varied from 100 to 400 W producing three different coatings referred to as P100,P200,P400.The effect of the increased W power on coatings thickness,roughness,structure,corrosion behavior and radiopacity was investigated.The coatings showed a power-dependent thickness and W concentration,different roughness values while a similar and uniform columnar structure.An amorphous phase was detected for both P100 and P200 coatings while γ-Fe,bcc-W and W_(3)C phases found for P400.Moreover,P200 and P400 showed a significantly higher corrosion rate(CR)compared to P100.The presence of W,W_(3)C as well as the Fe amount variation determined two different micro-galvanic corrosion mechanisms significantly changing the CR of coatings,0.26±0.02,59.68±1.21 and 59.06±1.16μm/year for P100,P200 and P400,respectively.Sample P200 with its most uniform morphology,lowest roughness(RMS=3.9±0.4 nm)and good radiopacity(~6%)appeared the most suitable radiopaque biodegradable coating investigated in this study.展开更多
基金This work was supported by“the Fundamental Research Funds for the Central Universities”(2232019D3-16)(China)the 111 Project 2.0“Biomedical Textile Materials Science and Technology”(B07024)(China)+3 种基金the Shanghai Science and Technology Support Project(18441902600)(China)the Engineering Research Center of Technical Textiles Ministry of Education(China)the Department of Surgery at Laval University(Quebec,Canada)the Fonds de Recherche de chirurgie vasculaire of the CHU(Quebec,Canada).The generous gift of device,by Medtronic and Vascutek is greatly acknowledged.The authors extend their appreciation to Boyin Qin,Yvan Douville,Pascal Rheaume,and Raymond Labbe.
文摘Superior long-term anchorage of the bridging stent-grafts from the fenestrated main body endograft could be achieved with the addition of a flared cuff,capable of preventing the previously observed fabric fraying around the fenestration as a result of the balloon angioplasty of the seal zone.This novel stent cuff design will also facilitate more complete biointegration of the devices,eliminate the hemodynamic variation as well as significantly reduce the possibility of a Type III endoleak.The feasibility of this concept is demonstrated by observations made from in-situ tests performed in a Beta endograft design.Flared cuffs made of poly(ε-caprolactone)supported with a weft-knitted polyester structure can be manufactured with various configurations to optimize the transition from the main body of the endograft,thus preventing the currently marketed designs’hemodynamic perturbation while also promoting endograft biointegration.This concept represents an evolution in branch graft design,which may enhance the long-term durability of customized fenestrations and open new applications for in-vivo graft fenestration in the near future.Further ongoing investigation to optimize its structure,X-ray opacity,fixation to the flared stent,and material biocompatibility are still required to build upon this concept’s proof.
基金partially funded by the Natural Science and Engineering Research Council of Canada(the Fonds de Recherche du Quebec sur les Natures et Technologie)the Canada Foundation for Innovationthe CHU de Quebec Research Center(through the Fonds de Recherche du Quebec sur la Sante).
文摘In this exploratory work,micrometric radiopaque W-Fe-Mn-C coatings were produced by magnetron sputtering plasma deposition,for the first time,with the aim to make very thin Fe-Mn stents trackable by fluoroscopy.The power of Fe-13Mn-1.2C target was kept constant at 400 W while that of W target varied from 100 to 400 W producing three different coatings referred to as P100,P200,P400.The effect of the increased W power on coatings thickness,roughness,structure,corrosion behavior and radiopacity was investigated.The coatings showed a power-dependent thickness and W concentration,different roughness values while a similar and uniform columnar structure.An amorphous phase was detected for both P100 and P200 coatings while γ-Fe,bcc-W and W_(3)C phases found for P400.Moreover,P200 and P400 showed a significantly higher corrosion rate(CR)compared to P100.The presence of W,W_(3)C as well as the Fe amount variation determined two different micro-galvanic corrosion mechanisms significantly changing the CR of coatings,0.26±0.02,59.68±1.21 and 59.06±1.16μm/year for P100,P200 and P400,respectively.Sample P200 with its most uniform morphology,lowest roughness(RMS=3.9±0.4 nm)and good radiopacity(~6%)appeared the most suitable radiopaque biodegradable coating investigated in this study.