The dynamic stress-fields and their distribution characteristics around boreholes in the directed crack blasting were measured with the dynamic photo-elastic laser holography apparatus and the ultradymamic measurement...The dynamic stress-fields and their distribution characteristics around boreholes in the directed crack blasting were measured with the dynamic photo-elastic laser holography apparatus and the ultradymamic measurement system. The directed crack mechanism and its mechanical model have been analysed and expounded. Through the 43 production experiments using slotted cartridges and the double triangle center cut-holes for directed crack blasting in underground rock drift, the results of which the rates of half-hole marks and efficiency of borehole,and the nonsmooth grades of the cut contours are 96%, 98% and 10cm respectively have been achieved.展开更多
This paper broke with the conventional ways of oxidizing and catalyzing. It researched a new way to prepare activated carbon from anthracites which employed oxidative additives. It investigated the effects of the addi...This paper broke with the conventional ways of oxidizing and catalyzing. It researched a new way to prepare activated carbon from anthracites which employed oxidative additives. It investigated the effects of the additive on adsorption and activation rate of the resultant activated carbon. The results showed that the new additives not only improved the adsorptivity but also increased the activation rate greatly, which is able to decrease the preparation cost.展开更多
A series of laboratory screening tests have been performed with the objective of evaluating the effect of feed rate, screen length and screen motion on the quality of separation. The separation performance has been ev...A series of laboratory screening tests have been performed with the objective of evaluating the effect of feed rate, screen length and screen motion on the quality of separation. The separation performance has been evaluated by the use of proposed ISO Standard measures which are based on the partition curve.The laboratory rig, the test programme and results derived from it are discussed. The effect of screen length, feed rate and screen motion on the levels of screen performance as indicated by these measures and a normalised separation size parameter are discussed in relation to the assumed screening conditions for the tests reported and conclusions are summarised.展开更多
A series of laboratory screening tests have been performed with the objective of evalu-ating the effect of feed rate, screen length and screen motion on the quality of separation achieved. The statistic analysis and r...A series of laboratory screening tests have been performed with the objective of evalu-ating the effect of feed rate, screen length and screen motion on the quality of separation achieved. The statistic analysis and results derived from it are discussed. Suggestions for future work with the objective of assessing the industrial significance of the research to the optimisation and design of screening processes are presented.展开更多
At the present stage, the exploitation loss and waste of mineral resources are serious.lf this trend goes on, it will undoubtedly accelerate the resource depletion. Based on the values of mineral resources and their n...At the present stage, the exploitation loss and waste of mineral resources are serious.lf this trend goes on, it will undoubtedly accelerate the resource depletion. Based on the values of mineral resources and their natural and economic attibutes, this paper sets up a multi-mine mineral resource exploitation model in the market competition. In addition, it analyses the struc-ture of the model and derives optimal conditions. Finally it gives a detailed interpretation of the practical application of the model for instance.展开更多
An experiment model, scaled 1:1, designed for studying a blasting method to clear away soot in a soot-delivery pipe in coal-burning power plant is described. By mixing RDX and Nitramon on a particular scale and sticki...An experiment model, scaled 1:1, designed for studying a blasting method to clear away soot in a soot-delivery pipe in coal-burning power plant is described. By mixing RDX and Nitramon on a particular scale and sticking the explosive cartridge on the outwall surface of the pipe, the experimental result makes clear that the controlled blasting method can get rid of the soot effectively. Under the action of the blasting compression wave and reflectance tension wave, the soot is destroyed effectively in the region of-60°~60° around the blasting site, that creates a condition for the second blasting in the surplus soot.展开更多
16Mn steel, 1Cr18Ni9 stainless steel, thermal sprayed Al2O3-TiO2 ceramic coating and nylon1010-5 %Al2O3 coating were tested with an erosion -corrosion tester.The effects of pH values and slurry velocities on the erosi...16Mn steel, 1Cr18Ni9 stainless steel, thermal sprayed Al2O3-TiO2 ceramic coating and nylon1010-5 %Al2O3 coating were tested with an erosion -corrosion tester.The effects of pH values and slurry velocities on the erosion-corrosion behavior of the materials tested were determined. The erosion-corrosion behavior of the materials tested changes with pH values and presents different change tendencies. The erosion-corrosion rates of the materials are increased with slurry velocities. The erosion-corrosion mechanisms for the steels and the coatings are considerably different.展开更多
An expert decision support system (EDSS) for multi-bins balance and contro1 of orequality in production ore bins of some large-scale open pit iron mine in China has been developed byexpert svitem tool software VP-EXPE...An expert decision support system (EDSS) for multi-bins balance and contro1 of orequality in production ore bins of some large-scale open pit iron mine in China has been developed byexpert svitem tool software VP-EXPERT and integration software LOTUS 1-2-3 in this paper. Itis known by practicing that a medium-scale EDSS constructed on microcomputer is completcly, feaasible by means of VP-EXEPERT to construct knowledge base system (KBS), LOTUS 1-2-3 tomake decision support system (DSS) and link them with BAT.展开更多
Modern opticai theory has shown that the far field or Fraunbofer diffraction equipment is identical to the Fourier spectral analyzer. In the Fourier speetral analyzer the Fourier spectra or the Fraunhofer diffaction p...Modern opticai theory has shown that the far field or Fraunbofer diffraction equipment is identical to the Fourier spectral analyzer. In the Fourier speetral analyzer the Fourier spectra or the Fraunhofer diffaction pattern of a graph is formed on the back focal plane when a laser beam is directed on the graph lying on the front foeal plane ; the Fourier spectra of the graph is also subjected to change during the deformation of the graph. Through analyzing the change of Fourier spectra the deformation of the graph can be obtained. A few years ago,based on the above principles the authors proposed a new technique of strain measurement by laser spectral analysis. Demonstration and discussion will be made in detail in this paper.展开更多
The density of fine coal has a major effect on the value of its flotation rate constant. The collector dose can increase the flotation rate of fine coal, especially for low ash coal, but the effect for gangue is not n...The density of fine coal has a major effect on the value of its flotation rate constant. The collector dose can increase the flotation rate of fine coal, especially for low ash coal, but the effect for gangue is not notable. The flotation rate of gangue is mainly governed by the water entrainment. A coal flotation rate constant model has been developed.展开更多
The optimal deeision theory and exploitation reliability of large scale mining area have been studied China since the late 1980’s. Researches have been earried out under the thought of mannature - machine system , an...The optimal deeision theory and exploitation reliability of large scale mining area have been studied China since the late 1980’s. Researches have been earried out under the thought of mannature - machine system , and eneouraging results have been obtained. The reliability evaluation of mining engineering ineludes the rellability exaluation of natural resources, mining technology and mine economics ete. And the geological reliability of deposit, as a natural condition, is the basis of all other evaiuation works. The paper summarizes the method for evaluating the geological reliaoility of deposit, diseusces the reliability of estimating methods for coal reserves and coai quality, evaiuates the natural resourees rellability of the Pit 1 of Antaibao Surface Coai Mine, Pingsuo, Shanxi Province.which was taken as a case study.展开更多
The structural de formation of Lu’ an mining area is characterized by a remarkable feature of zoning along E-W direction, in the east limb of Qinshui basin, Shanxi Province, China. The re gional tectonic stress field...The structural de formation of Lu’ an mining area is characterized by a remarkable feature of zoning along E-W direction, in the east limb of Qinshui basin, Shanxi Province, China. The re gional tectonic stress fields and basement tectonics are two fundamental factors to control the cover tectonic framework. This paper uses the finite-element method with a elastic-plastic pIan problem model to simulate the three periods of stress fields resulting from field geological study’ Based on these works, the formation and evolution of tectonic framework of Lu’ an mining area have been discussed.展开更多
Several damaged distributors of the shearer’s main pump have been analyzed. Lubricated abrasive wear was found to be the cause of distributor failure. On the basis of selecting reasonably materials and surface strent...Several damaged distributors of the shearer’s main pump have been analyzed. Lubricated abrasive wear was found to be the cause of distributor failure. On the basis of selecting reasonably materials and surface strenthening methods of distributors, pump’s function tests under the condition of contamination were performed with actual distributors. The results showed that wear resistance and contaminant wear lifetime of TiN coated high-speed steel W18Cr4V distributor is the best and TiN coating technology can be used in manufacturing of pump’s distributor.展开更多
文摘The dynamic stress-fields and their distribution characteristics around boreholes in the directed crack blasting were measured with the dynamic photo-elastic laser holography apparatus and the ultradymamic measurement system. The directed crack mechanism and its mechanical model have been analysed and expounded. Through the 43 production experiments using slotted cartridges and the double triangle center cut-holes for directed crack blasting in underground rock drift, the results of which the rates of half-hole marks and efficiency of borehole,and the nonsmooth grades of the cut contours are 96%, 98% and 10cm respectively have been achieved.
文摘This paper broke with the conventional ways of oxidizing and catalyzing. It researched a new way to prepare activated carbon from anthracites which employed oxidative additives. It investigated the effects of the additive on adsorption and activation rate of the resultant activated carbon. The results showed that the new additives not only improved the adsorptivity but also increased the activation rate greatly, which is able to decrease the preparation cost.
文摘A series of laboratory screening tests have been performed with the objective of evaluating the effect of feed rate, screen length and screen motion on the quality of separation. The separation performance has been evaluated by the use of proposed ISO Standard measures which are based on the partition curve.The laboratory rig, the test programme and results derived from it are discussed. The effect of screen length, feed rate and screen motion on the levels of screen performance as indicated by these measures and a normalised separation size parameter are discussed in relation to the assumed screening conditions for the tests reported and conclusions are summarised.
文摘A series of laboratory screening tests have been performed with the objective of evalu-ating the effect of feed rate, screen length and screen motion on the quality of separation achieved. The statistic analysis and results derived from it are discussed. Suggestions for future work with the objective of assessing the industrial significance of the research to the optimisation and design of screening processes are presented.
文摘At the present stage, the exploitation loss and waste of mineral resources are serious.lf this trend goes on, it will undoubtedly accelerate the resource depletion. Based on the values of mineral resources and their natural and economic attibutes, this paper sets up a multi-mine mineral resource exploitation model in the market competition. In addition, it analyses the struc-ture of the model and derives optimal conditions. Finally it gives a detailed interpretation of the practical application of the model for instance.
文摘An experiment model, scaled 1:1, designed for studying a blasting method to clear away soot in a soot-delivery pipe in coal-burning power plant is described. By mixing RDX and Nitramon on a particular scale and sticking the explosive cartridge on the outwall surface of the pipe, the experimental result makes clear that the controlled blasting method can get rid of the soot effectively. Under the action of the blasting compression wave and reflectance tension wave, the soot is destroyed effectively in the region of-60°~60° around the blasting site, that creates a condition for the second blasting in the surplus soot.
文摘16Mn steel, 1Cr18Ni9 stainless steel, thermal sprayed Al2O3-TiO2 ceramic coating and nylon1010-5 %Al2O3 coating were tested with an erosion -corrosion tester.The effects of pH values and slurry velocities on the erosion-corrosion behavior of the materials tested were determined. The erosion-corrosion behavior of the materials tested changes with pH values and presents different change tendencies. The erosion-corrosion rates of the materials are increased with slurry velocities. The erosion-corrosion mechanisms for the steels and the coatings are considerably different.
文摘An expert decision support system (EDSS) for multi-bins balance and contro1 of orequality in production ore bins of some large-scale open pit iron mine in China has been developed byexpert svitem tool software VP-EXPERT and integration software LOTUS 1-2-3 in this paper. Itis known by practicing that a medium-scale EDSS constructed on microcomputer is completcly, feaasible by means of VP-EXEPERT to construct knowledge base system (KBS), LOTUS 1-2-3 tomake decision support system (DSS) and link them with BAT.
文摘Modern opticai theory has shown that the far field or Fraunbofer diffraction equipment is identical to the Fourier spectral analyzer. In the Fourier speetral analyzer the Fourier spectra or the Fraunhofer diffaction pattern of a graph is formed on the back focal plane when a laser beam is directed on the graph lying on the front foeal plane ; the Fourier spectra of the graph is also subjected to change during the deformation of the graph. Through analyzing the change of Fourier spectra the deformation of the graph can be obtained. A few years ago,based on the above principles the authors proposed a new technique of strain measurement by laser spectral analysis. Demonstration and discussion will be made in detail in this paper.
文摘The density of fine coal has a major effect on the value of its flotation rate constant. The collector dose can increase the flotation rate of fine coal, especially for low ash coal, but the effect for gangue is not notable. The flotation rate of gangue is mainly governed by the water entrainment. A coal flotation rate constant model has been developed.
文摘The optimal deeision theory and exploitation reliability of large scale mining area have been studied China since the late 1980’s. Researches have been earried out under the thought of mannature - machine system , and eneouraging results have been obtained. The reliability evaluation of mining engineering ineludes the rellability exaluation of natural resources, mining technology and mine economics ete. And the geological reliability of deposit, as a natural condition, is the basis of all other evaiuation works. The paper summarizes the method for evaluating the geological reliaoility of deposit, diseusces the reliability of estimating methods for coal reserves and coai quality, evaiuates the natural resourees rellability of the Pit 1 of Antaibao Surface Coai Mine, Pingsuo, Shanxi Province.which was taken as a case study.
文摘The structural de formation of Lu’ an mining area is characterized by a remarkable feature of zoning along E-W direction, in the east limb of Qinshui basin, Shanxi Province, China. The re gional tectonic stress fields and basement tectonics are two fundamental factors to control the cover tectonic framework. This paper uses the finite-element method with a elastic-plastic pIan problem model to simulate the three periods of stress fields resulting from field geological study’ Based on these works, the formation and evolution of tectonic framework of Lu’ an mining area have been discussed.
文摘Several damaged distributors of the shearer’s main pump have been analyzed. Lubricated abrasive wear was found to be the cause of distributor failure. On the basis of selecting reasonably materials and surface strenthening methods of distributors, pump’s function tests under the condition of contamination were performed with actual distributors. The results showed that wear resistance and contaminant wear lifetime of TiN coated high-speed steel W18Cr4V distributor is the best and TiN coating technology can be used in manufacturing of pump’s distributor.