Based on the data of MSW generation in Beijing from 2004 to 2012,an ARIMA model of time series analysis was established. By contrast of the modeling results of different yearly data,the forecast period was identified ...Based on the data of MSW generation in Beijing from 2004 to 2012,an ARIMA model of time series analysis was established. By contrast of the modeling results of different yearly data,the forecast period was identified to be 10 years. The yearly production of MSW from 2015 to 2025 was forecasted by using SPSS 16. 0 software. Result shows that the forecasting effect of ARIMA( 1,0,1) model is relatively good,and it can be applied to prediction of MSW production in Beijing. In the next 10 years,the amount of MSW produced in Beijing is increasing,but the growth rate is not large. Is expected to 2025,the production of MSW will reach more than 9 million tons. Taking into account the MSW return,it is inferred that the production of MSW in Beijing in 2025 will be close to 10 million tons. In order to reduce the pressure of subsequent waste disposal facilities in Beijing,the government can increase the intensity of the recycling of waste materials.展开更多
The effects of adding a bulking agent on the performance and odor emissions(ammonia and eight sulfur-containing odorous compounds) when biodrying kitchen waste were investigated. Three treatments were considered: t...The effects of adding a bulking agent on the performance and odor emissions(ammonia and eight sulfur-containing odorous compounds) when biodrying kitchen waste were investigated. Three treatments were considered: the addition of either cornstalks(CS) or wood peat(WP) to kitchen waste as a bulking agent before biodrying, and a control treatment(CK). The water-removal rates for CK, CS, and WP treatments were 0.35, 0.56, and0.43 kg/kg, respectively. Addition of bulking agents to kitchen waste produced less leachate,higher moisture-removal rates, and lower consumption of volatile solids. The CS treatment had the highest biodrying index(4.07), and those for the WP and CK treatments were 3.67 and 1.97, respectively. Adding cornstalks or wood peat decreased NH3 emissions by 55.8%and 71.7%, respectively. Total sulfur losses were 3.6%–21.6% after 21 days biodrying, and H2 S and Me2 SS were the main(〉 95%) sulfur compounds released. The smallest amounts of sulfur-containing odorous compounds were emitted when cornstalks were added, and adding cornstalks and wood peat decreased total sulfur losses by 50.6%–64.8%.展开更多
Triphase polyimide nanocomposite films were fabricated using barium titanate (BaTiO3) with high dielectric constant and silver (Ag) with high conductivity as fillers. In situ method was utilized to obtain the homo...Triphase polyimide nanocomposite films were fabricated using barium titanate (BaTiO3) with high dielectric constant and silver (Ag) with high conductivity as fillers. In situ method was utilized to obtain the homogeneous dispersion of nanoparticles. The in situ polymerization of polyimide precursor-poly(amic acid) was performed in the presence of BaTiO3 particles. Silver compound 1,1,1-trifluoro-2,4-pentadionato silver(I) was added into the BaTiO3 containing poly(amic acid) solution to achieve silver nanoparticles via in situ self metallization technique. The thermally induced reduction converted silver (I) to metallic silver with concomitant imidization of poly(amic acid) to polyimide. Both BaTiO3 and silver nanoparticles were uniformly dispersed in the polyimide substrate. The dependence of dielectric behavior on the BaTiO3 and Ag contents was studied. The incorporation of small amount of silver nanoparticles greatly increased dielectric constant of composite films.展开更多
基金Supported by the Project of Beijing Municipal Commission of City Management(SC1708A)
文摘Based on the data of MSW generation in Beijing from 2004 to 2012,an ARIMA model of time series analysis was established. By contrast of the modeling results of different yearly data,the forecast period was identified to be 10 years. The yearly production of MSW from 2015 to 2025 was forecasted by using SPSS 16. 0 software. Result shows that the forecasting effect of ARIMA( 1,0,1) model is relatively good,and it can be applied to prediction of MSW production in Beijing. In the next 10 years,the amount of MSW produced in Beijing is increasing,but the growth rate is not large. Is expected to 2025,the production of MSW will reach more than 9 million tons. Taking into account the MSW return,it is inferred that the production of MSW in Beijing in 2025 will be close to 10 million tons. In order to reduce the pressure of subsequent waste disposal facilities in Beijing,the government can increase the intensity of the recycling of waste materials.
基金financially supported by the Ministry of Science and Technology of the People's Republic of Chinathrough the High Effective Intelligent Composting Process and Key Technology Research program(No.2016YFD0800601)the project of“State Key Laboratory of Solid Waste Reuse for Building Materials”(No.SWR-2014-005)
文摘The effects of adding a bulking agent on the performance and odor emissions(ammonia and eight sulfur-containing odorous compounds) when biodrying kitchen waste were investigated. Three treatments were considered: the addition of either cornstalks(CS) or wood peat(WP) to kitchen waste as a bulking agent before biodrying, and a control treatment(CK). The water-removal rates for CK, CS, and WP treatments were 0.35, 0.56, and0.43 kg/kg, respectively. Addition of bulking agents to kitchen waste produced less leachate,higher moisture-removal rates, and lower consumption of volatile solids. The CS treatment had the highest biodrying index(4.07), and those for the WP and CK treatments were 3.67 and 1.97, respectively. Adding cornstalks or wood peat decreased NH3 emissions by 55.8%and 71.7%, respectively. Total sulfur losses were 3.6%–21.6% after 21 days biodrying, and H2 S and Me2 SS were the main(〉 95%) sulfur compounds released. The smallest amounts of sulfur-containing odorous compounds were emitted when cornstalks were added, and adding cornstalks and wood peat decreased total sulfur losses by 50.6%–64.8%.
基金financially supported by the National Natural Science Foundation of China(No.51073020)
文摘Triphase polyimide nanocomposite films were fabricated using barium titanate (BaTiO3) with high dielectric constant and silver (Ag) with high conductivity as fillers. In situ method was utilized to obtain the homogeneous dispersion of nanoparticles. The in situ polymerization of polyimide precursor-poly(amic acid) was performed in the presence of BaTiO3 particles. Silver compound 1,1,1-trifluoro-2,4-pentadionato silver(I) was added into the BaTiO3 containing poly(amic acid) solution to achieve silver nanoparticles via in situ self metallization technique. The thermally induced reduction converted silver (I) to metallic silver with concomitant imidization of poly(amic acid) to polyimide. Both BaTiO3 and silver nanoparticles were uniformly dispersed in the polyimide substrate. The dependence of dielectric behavior on the BaTiO3 and Ag contents was studied. The incorporation of small amount of silver nanoparticles greatly increased dielectric constant of composite films.