Highly dispersed Cd cluster supported on TiO_(2) as an efficient catalyst for CO_(2) hydrogenation to methanol

The conversion of CO_(2) to methanol with high activity and high selectivity remains challenging owing to the kinetic and thermodynamic limitations associated with the low chemical reactivity exhibited by CO_(2).Herein,we report a novel Cd/TiO_(2) catalyst exhibiting a methanol selectivity of 81%,a CO_(2) conversion of 15.8%,and a CH_(4) selectivity below 0.7%.A combination of experimental and computational studies revealed that the unique electronic properties exhibited by the Cd clusters supported by the TiO_(2) matrix were responsible for the high selectivity of CO_(2) hydrogenation to methanol via the HCOO*pathway at the interfacial catalytic sites.

Effect of initial nickel particle size on stability of nickel catalysts for aqueous phase reforming

The deactivation behavior by crystallite growth of nickel nanoparticles on various supports（carbon nanofibers, zirconia, Si C, α-Al2O3 and γ-Al2O3） was investigated in the aqueous phase reforming of ethylene glycol. Supported Ni catalysts of ~10 wt% were prepared by impregnation of carbon nanofibers（CNF）,Zr O2, SiC, γ-Al2O3 and α-Al2O3. The extent of the Ni nanoparticle growth on various support materials follows the order CNF ~ ZrO2〉 SiC 〉 γ-Al2O3〉〉 α-Al2O3 which sequence, however, was determined by the initial Ni particle size. Based on the observed nickel leaching and the specific growth characteristics; the particle size distribution and the effect of loading on the growth rate, Ostwald ripening is suggested to be the main mechanism contributing to nickel particle growth. Remarkably, initially smaller Ni particles（~12 nm） supported on α-Al2O3 were found to outgrow Ni particles with initially larger size（~20 nm）. It is put forward that the higher susceptibility with respect to oxidation of the smaller Ni nanoparticles and differences in initial particle size distribution are responsible for this behavior.

Construction of charge transfer chain in Bi_(12)TiO_(20)-Bi_(4)Ti_(3)O_(12)/α-Bi_(2)O_(3)composites to accelerate photogenerated charge separation

Photogenerated charge separation and transfer is one of the bottleneck steps in photocatalysis,and efficient charge separation strategies are strongly desired.Here,mimicking the electron transport chain in natural photosynthesis,we report the design and fabrication of a charge transfer chain using bismuth-based semiconductor as a proof-of-concept.In view of the thermodynamic energy band positions and structural similarity based on the density functional theory(DFT)analysis,heterostructured combination ofα-Bi_(2)O_(3),perovskite-like Bi_(4)Ti_(3)O_(12),and sillenite Bi12TiO20 was designed for fabrication of charge transfer chain.By tuning the molar ratio of Bi and Ti precursors,the Bi_(4)Ti_(3)O_(12)and Bi12TiO20 particles were formed on the surface ofα-Bi_(2)O_(3)by an insitu transformation process,giving rise to Bi_(12)TiO_(20)-Bi_(4)Ti_(3)O_(12)/α-Bi_(2)O_(3)composites with charge transfer chain.We propose that the effective charge transfer is accomplished amongα-Bi_(2)O_(3),Bi12TiO20,and Bi_(4)Ti_(3)O_(12),which significantly improves the photogenerated charge separation and transfer,as indicated by photoluminescene,time-resolved photoluminescene,and electrochemical impedance spectra results.As expected,the Bi_(12)TiO_(20)-Bi_(4)Ti_(3)O_(12)/α-Bi_(2)O_(3)shows the superior photocatalytic activity for the degradation of environmental pollutants with high concentration.Even for the refractory pollutants like 4-chlorophenol,the optimal Bi_(12)TiO_(20)-Bi_(4)Ti_(3)O_(12)/α-Bi_(2)O_(3)composite shows 28 times higher than that ofα-Bi_(2)O_(3)for photocatalytic degradation,verifying the superiority of photogenerated charge transfer chain in photocatalysis.This work demonstrates the feasibility of the charge transfer chain strategy to boost the photogenerated charge separation,which is of great significance for designing energy and environmental-related materials in heterogonous photocatalysis.