期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Equation of state of Zr_(41)Ti_(14)Cu_(12.5)Ni_(10)Be_(22.5) bulk metallic glas
1
作者 战再吉 刘秋云 +2 位作者 郑润国 王文魁 刘景 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2007年第3期432-435,共4页
The knowledge of the equation of state(EOS)and the compressibility of a solid are of central importance for the understanding of the behavior and the application of a condensed matter.The compression behavior of Zr41T... The knowledge of the equation of state(EOS)and the compressibility of a solid are of central importance for the understanding of the behavior and the application of a condensed matter.The compression behavior of Zr41Ti14Cu12.5Ni10Be22.5 bulk metallic glass(BMG)is investigated at room temperature up to 24 GPa using in-situ high pressure energy dispersive X-ray diffraction with synchrotron radiation.A model of basic cell volume has been established and the equation of state of BMG is determined by the calculation of radial distribution function.The experimental results indicate that the BMG contains a large amount of vacancy-like free volume.Low pressure(below 7 GPa)induces the collapse of the free volume to some extent and structure relaxation in the BMG. 展开更多
关键词 金属玻璃 高压 状态方程 同步加速器辐射 复合材料
下载PDF
Study on Microwave Pretreatment Technology to Improve the Effect of Shellac Impregnation of Fast-Growing Chinese Fir
2
作者 Xiya Yu Nianfeng Wei +4 位作者 Qisong Liu Zhiyong Wu Mizi Fan Weigang Zhao Qinzhi Zeng 《Journal of Renewable Materials》 SCIE EI 2022年第8期2041-2053,共13页
To improve the mechanical properties of fast-growing Chinese fir(Cunnighamia lanceolate),expand its range of application,increase its value,and avoid the environmental pollution caused by impregnation with synthetic r... To improve the mechanical properties of fast-growing Chinese fir(Cunnighamia lanceolate),expand its range of application,increase its value,and avoid the environmental pollution caused by impregnation with synthetic resin,Chinese fir was impregnated with a shellac solution.Since the shellac solution was difficult to penetrate into fast-growing Chinese fir,so microwave pretreatment was used to irradiate the wood to improve the permeability.This study investigated the effects of four factors,including the content of moisture in the wood before it was microwaved,the chamber pressure of microwave,the time of microwaving and the vacuum impregnation on the mechanical properties of Chinese fir wood.When the moisture content of wood before microwave was approximately 50%–60%,after microwaving and impregnation,the ultimate strength in static bending(modulus of rupture[MOR])and strength in compression perpendicular to the grain(SCPG)of the wood increased significantly.A microwave time of 100 seconds was more effective at improving the MOR and SCPG of the wood.If the wood was microwaved for too short or long period of time,the microwave pretreatment was not effective.When the samples were immersed in shellac for a longer period,the MOR and SCPG of Chinese fir gradually increased,but when the wood was impregnated for more than 12 hours,the increases were not significant.After the shellac penetrated the Chinese fir wood,it spread on the inner wall surface of tracheid to form a shellac film and easily formed plug-like deposits in microcapillaries.The use of Fourier-transform infrared spectroscopy,scanning electron microscopy and scanning electron microscopy-energy dispersion x-ray indicated that the microwave pretreatment can destroy the pit membranes on tracheids and facilitate the ability of shellac to penetrate the channel. 展开更多
关键词 Fast-growing Chinese fir Microwave pretreatment SHELLAC IMPREGNATION Mechanical properties
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部