Sandbody architecture of the bar finger within shoal water delta front:Insights from the Lower Member of Minghuazhen Formation,Neogene,Bohai BZ25 Oilfield,Bohai Bay Basin,East China

Core, well logging and seismic data were used to investigate sandbody architectural characteristics within Lower Member of Minghuazhen Formation in Neogene, Bohai BZ25 Oilfield, and to analyze the sedimentary microfacies, distribution and internal architecture characteristics of the bar finger within shoal water delta front. The branched sand body within shoal water delta front is the bar finger, consisting of the mouth bar, distributary channel over bar, and levee. The distributary channel cuts through the mouth bar, and the thin levee covers the mouth bar which is located at both sides of distributary channel. The bar finger is commonly sinuous and its sinuosity increases basinward. The distributary channel changes from deeply incising the mouth bar to shallowly incising top of the mouth bar.The aspect ratio ranges from 25 to 50 and there is a double logarithmic linear positive relationship between the width and thickness for the bar finger, which is controlled by base-level changing in study area. For the bar finger, injection and production in the same distributary channel should be avoided during water flooding development. In addition, middle–upper distributary channel and undrilled mouth bar are focus of tapping remaining oil.

Identification and geochemical significance of unusual C24 tetracyclic terpanes in Shahejie Formation source rocks in the Bozhong subbasin,Bohai Bay Basin

C_(24)tetracyclic terpanes are common compounds in source rocks and crude oils,and C_(24)17,21-secohopane is the most common and widely used source-related indicator.In this study,three unusual C_(24)tetracyclic terpanes were detected on the m/z 191 chromatogram of saturated hydrocarbons in the Shahejie Formation source rocks in the Bozhong subbasin.Based on the mass spectra characteristics,diagnostic ion fragments,retention time and comparisons with published literature,three unusual C_(24)tetracyclic terpanes were identified as 10β(H)-des-A-oleanane,10β(H)-des-A-lupane and C_(24)des-Ahopane.To the best of our knowledge,this is the first study to detect and publicly report these three compounds in source rock samples from the Shahejie Formation of the Bozhong subbasin,Bohai Bay Basin.The results indicated that 10β(H)-des-A-oleanane and 10β(H)-des-A-lupane likely originated from terre strial angiosperms,while C_(24)des-A-hopane likely originated fro m prokaryotic o rganisms.Te rrestrial angiosperms provide the material basis for the generation of compounds A and B,and the distribution and concentration of these two compounds are affected by thermal maturity.In the low maturity stage(0.5%<R_(0)<0.7%),compounds A and B are relatively enriched in the source rocks.

Stable Production Technology for Horizontal Well Development in Shallow Water Delta Oilfield of Bohai Bay, China

BZ Oilfield is a medium-sized oilfield with shallow delta facies deposits in Bohai Bay of China,compared with fluvial and delta facies oilfields,there is no mature experience for reference of reservoir configuration,well pattern arrangement and development model in offshore oilfields in China.In view of the difficulty in describing the reservoir configuration of shallow water delta,the single distributary sand dam in shallow water delta is characterized by well-seismic combination and multi-attribute constraints.The mathematical mechanism model of pinch-out position of sand body is established,fine characterization of BZ shallow water delta reservoir is put forward.The horizontal well pattern arrangement type for shallow water delta reservoir is proposed and the method of well pattern optimization based on vertical displacement theory is put forward.A method of inversion of reservoir connectivity using production dynamic data by numerical well testing is proposed and a new method for optimizing water injection rate in water injection wells is proposed aiming at the difficulty of recognizing injection-production connectivity of shallow water delta reservoirs.The fine configuration of BZ shallow water delta reservoir based on distributary sand dam is proposed,which guides the recognition of remaining oil distribution law.By deploying adjustment wells,the water flooding coincidence degree of actual drilling is 86% compared with that of pre-drilling prediction,which indicates that the research results of reservoir configuration can effectively guide the understanding of oilfield geology.Through the theoretical well arrangement type of vertical displacement of single sand body in horizontal wells of shallow water delta reservoir,a high water flooding recovery rate of 35% is achieved in primary well pattern.The connectivity coefficients of injection-production boundary of shallow water delta reservoir configuration are calculated,and the water injection distribution coefficients are obtained by normalizing the directional coefficients.This paper presents a configuration method based on multi-attribute fusion under the constraints of sedimentary process.In this paper,a shallow water delta reservoir configuration method based on multi-attribute fusion constrained by sedimentary process is proposed,and the injection-production connectivity coefficient and injection well distribution coefficient of the configuration boundary are calculated.

Study of the mechanisms of streamline-adjustment-assisted heterogeneous combination flooding for enhanced oil recovery for post-polymer-flooded reservoirs

Streamline-adjustment-assisted heterogeneous combination flooding is a new technology for enhanced oil recovery for post-polymer-flooded reservoirs.In this work,we first carried out a series of 2D visualization experiments for different chemical flooding scenarios after polymer flooding.Then,we explored the synergistic mechanisms of streamline-adjustment-assisted heterogeneous combination flooding for enhanced oil recovery and the contribution of each component.Test results show that for single heterogeneous combination flooding,the residual oil in the main streamline area after polymer flooding is ready to be driven,but it is difficult to be recovered in the non-main streamline area.Due to the effect of drainage and synergism,the streamline-adjustment-assisted heterogeneous combination flooding diverts the injected chemical agent from the main streamline area to the non-main streamline area,which consequently expands the active area of chemical flooding.Based on the results from the single-factor contribution of the quantitative analysis,the contribution of temporary plugging and profile control of branched preformed particle gels ranks in the first place and followed by the polymer profile control and the effect of streamline adjustment.On the contrary,the surfactant contributes the least to enhance the efficiency of oil displacement.

The contribution of bacteria to organic matter in coal-measure source rocks

On the basis of GC–MS analysis, a suite of nine coal-measure source rocks(Ro 0.51%–0.63%) from the southern margin of Junggar basin was found to contain many biomarkers for bacterially-generated hydrocarbons:hopane, sesquiterpene, C_(23)+ monomethyl alkanes(even carbon predominance), and C_(24)+ alkyl cyclohexane.Rock–eval and microscope analysis indicate that vitrinite(especially desmocollinite and homocollinite) plays a significant role in the generation of hydrocarbons in coalmeasure source rocks. Vitrinite performs this role by absorbing ultramicroscopic organic matter, generally in the form of resins or bacterial plastids. C_(23)+ monomethyl alkanes(even carbon predominance) and C_(24)+ alkyl cyclohexane series compounds are derived from bacterial metabolites of higher plants. The ultramicro organic matter adsorbed by vitrinite source rocks in the study area is probably ultramicro bacterial plastids. Because the organic matter of higher plants with low hydrogen content has been transformed into organic matter rich in hydrogen by bacteria, the hydrocarbon generation capacity of source rocks is greatly improved. In other words, in coal-measure source rocks, bacteria play an important role in hydrocarbon generation.

First-order multiples imaging aided by water bottom

Surface-related multiples frequently propagate into the subsurface and contain abundant information on small reflection angles.Compared with the conventional migration of primaries,migration of multiples offers complementary illumination and a higher vertical resolution.However,crosstalk artifacts caused by unrelated multiples during reverse time migration(RTM)using multiples severely degrade the reliability and interpretation of the final migration images.Therefore,we proposed RTM using first-order receiver-side water-bottom-related multiples for eliminating crosstalk artifacts and enhancing vertical resolution.We first backward propagate the first-order receiver-side water-bottom-related multiples using a water-layer model,followed by saving the upper boundary wavefield.Then we produce the source wavefield using a seismic wavelet and the receiver wavefield by back-extrapolating the saved boundary.Finally,the cross-correlation imaging condition is applied to generate the final image.This method transforms the receiver-side multiples into primaries,followed by the conventional migration processing procedures.Numerical examples using synthetic datasets demonstrate that our method significantly enhances the imaging quality by eliminating crosstalk artifacts and improving the resolution.

Study on Injection-Production System Adjustment of Fault Block Reservoir Based on Equilibrium Displacement

This paper proposed a method of injection-production system adjustment to solve the problem that the water flooding effect was restricted because of the horizontal and vertical contradictions during the development process of fault block reservoirs. Considering the heterogeneity of reservoir, the Buckley-Leverett water flooding theory was applied to establish the relationship between the recovery and cumulative water injection. In order to achieve the goal of vertically balanced recovery of each section, the calculation method of vertical sectional injection allocation was proposed. The planar triangular seepage unit was assumed and sweep coefficients of different oil-water distribution patterns were characterized using multi-flow tube method. In order to balance and maximize the plane sweep coefficient, the calculation method of plane production system optimization was obtained. Then the injection-production system stereoscopic adjustment method based on equilibrium displacement was proposed with vertical sectional injection allocation and plane production system optimization. This method was applied to injection and production adjustment of BZ oilfield in southern Bohai. The effect of water control and oil increase was obvious. This method can greatly improve the effect of water flooding of offshore fault block reservoirs with the adjustment of injection-production system.