A novel laser processing technique was developed for making channels in the nano regime in this paper.A Nd:YAG laser was used to dry fabricate micro channels(25μm～100μm di- ameter)in a 1 cm^3 fused silica substrate...A novel laser processing technique was developed for making channels in the nano regime in this paper.A Nd:YAG laser was used to dry fabricate micro channels(25μm～100μm di- ameter)in a 1 cm^3 fused silica substrate by thermal-induced processing.By controlling the locations of these initiating micro channels on a silica cube,1D-controllable self-connecting nano fractures can be formed as rectangular channels.These nano channels are smooth and with extremely high aspect ratio(～10~4 depth to width ratio).A possible mechanism is proposed to explain the formation of the nano channels.This laser-based nano channel fabrication technique is fast and inexpensive,and with potential applications in capillary electrophoresis and electro-osmosis driven nano-filtration.展开更多
The demand for lightweight, flexible, and high-performance portable power sources urgently requires high-efficiency and stable flexible solar cells. In the case of perovskite solar cells(PSCs), most of the common elec...The demand for lightweight, flexible, and high-performance portable power sources urgently requires high-efficiency and stable flexible solar cells. In the case of perovskite solar cells(PSCs), most of the common electron transport layer(ETL) needs to be annealed for improving the optoelectronic properties,while conventional flexible substrates could barely stand the high temperature. Herein, a vacuumassisted annealing SnO_(2) ETL at low temperature(100℃) is utilized in flexible PSCs and achieved high efficiency of 20.14%. Meanwhile, the open-circuit voltage(V_(oc)) increases from 1.07 V to 1.14 V. The flexible PSCs also show robust bending stability with 86.8% of the initial efficiency is retained after 1000 bending cycles at a bending radius of 5 mm. X-ray photoelectron spectroscopy(XPS), atomic force microscopy(AFM), and contact angle measurements show that the density of oxygen vacancies, the surface roughness of the SnO_(2) layer, and film hydrophobicity are significantly increased, respectively. These improvements could be due to the oxygen-deficient environment in a vacuum chamber, and the rapid evaporation of solvents. The proposed vacuum-assisted low-temperature annealing method not only improves the efficiency of flexible PSCs but is also compatible and promising in the large-scale commercialization of flexible PSCs.展开更多
基金The project supported by the National Natural Science Foundation of China (50375031)the Hong Kong Research Grants Council (CUHK 4416/99E)
文摘A novel laser processing technique was developed for making channels in the nano regime in this paper.A Nd:YAG laser was used to dry fabricate micro channels(25μm～100μm di- ameter)in a 1 cm^3 fused silica substrate by thermal-induced processing.By controlling the locations of these initiating micro channels on a silica cube,1D-controllable self-connecting nano fractures can be formed as rectangular channels.These nano channels are smooth and with extremely high aspect ratio(～10~4 depth to width ratio).A possible mechanism is proposed to explain the formation of the nano channels.This laser-based nano channel fabrication technique is fast and inexpensive,and with potential applications in capillary electrophoresis and electro-osmosis driven nano-filtration.
基金supported by the National Natural Science Foundation of China(61774046)。
文摘The demand for lightweight, flexible, and high-performance portable power sources urgently requires high-efficiency and stable flexible solar cells. In the case of perovskite solar cells(PSCs), most of the common electron transport layer(ETL) needs to be annealed for improving the optoelectronic properties,while conventional flexible substrates could barely stand the high temperature. Herein, a vacuumassisted annealing SnO_(2) ETL at low temperature(100℃) is utilized in flexible PSCs and achieved high efficiency of 20.14%. Meanwhile, the open-circuit voltage(V_(oc)) increases from 1.07 V to 1.14 V. The flexible PSCs also show robust bending stability with 86.8% of the initial efficiency is retained after 1000 bending cycles at a bending radius of 5 mm. X-ray photoelectron spectroscopy(XPS), atomic force microscopy(AFM), and contact angle measurements show that the density of oxygen vacancies, the surface roughness of the SnO_(2) layer, and film hydrophobicity are significantly increased, respectively. These improvements could be due to the oxygen-deficient environment in a vacuum chamber, and the rapid evaporation of solvents. The proposed vacuum-assisted low-temperature annealing method not only improves the efficiency of flexible PSCs but is also compatible and promising in the large-scale commercialization of flexible PSCs.
