Thermal properties of glass-ceramic bonded thermal barrier coating system

The thermal properties of a thermal barrier coating （TBC） system comprised of BaO-MgO-SiO_2 based glass-ceramic bond coating, 8% （mass fraction） yttria stabilized zirconia （8YSZ） top coating and nimonic alloy substrate were evaluated. The thermal diffusivity and thermal conductivity of the TBC coated substrate were lower than those of bare substrate and glass-ceramic coated substrate under identical conditions. The specific heat capacity, thermal diffusivity and thermal conductivity of the TBC coated substrate increase with the increase of the temperature. Further, it is observed that the thermal conductivity of the TBC system decreases with the increase in the top coating thickness.

Thermo-mechanical properties of mullite–zirconia composites derived from reaction sintering of zircon and sillimanite beach sand: Effect of CaO

Mullite–zirconia composites containing 20% zirconia（mass fraction） were prepared by reaction sintering route utilizing Indian coastal zircon flour and sillimanite beach sand. 4%-12% of CaO（mole fraction） with respect to zirconia was used as additive. The effect of additive on densification, microstructure as well as various mechanical and thermo-mechanical properties was studied. Incorporation of CaO reduced the densification temperature of the composites to 1550 ℃ compared to 1600 ℃（for CaO free samples）. CaO formed small amount of liquid phase（calcium aluminosilicate）, which facilitated sintering. Average grain size of the composites decreased up to 4% CaO addition, afterwards grain size increased with further addition of CaO. Samples with 4% CaO exhibited ～225 MPa of flexural strength, ～6 MPa·m^1/2 of fracture toughness and significant improvement in thermal shock resistance. CaO stabilized the tetragonal zirconia phase and thus improved the mechanical properties.

Growth of 4＂ diameter polycrystailine diamond wafers with high thermal conductivity by 915 MHz microwave plasma chemical vapor deposition

Polycrystalline diamond（PCD） films 100 mm in diameter are grown by 915 MHz microwave plasma chemical vapor deposition（MPCVD） at different process parameters,and their thermal conductivity（TC） is evaluated by a laser flash technique（LFT） in the temperature range of230-380 K.The phase purity and quality of the films are assessed by micro-Raman spectroscopy based on the diamond Raman peak width and the amorphous carbon（a-C） presence in the spectra.Decreasing and increasing dependencies for TC with temperature are found for high and low quality samples,respectively.TC,as high as 1950 ± 230 W m-1 K-1 at room temperature,is measured for the most perfect material.A linear correlation between the TC at room temperature and the fraction of the diamond component in the Raman spectrum for the films is established.

Mechanochemical Synthesis of Nano Calcium Silicate Particles at Room Temperature

Nano-sized calcium silicate powders were synthesized at room temperature by the new mechanochemical method using a high energy planetary ball mill. The formation of calcium silicate from its raw materials (calcium carbonate and dehydrated silica gel) was monitored by the XRD analysis with progression of ball milling. It is observed that the synthetic process comes to an end through the following three sequential stages: comminution of raw materials, recombination of comminuted raw materials to final product, and comminution of final product to smaller sizes. The nanostructure of the synthesized powder was realized by the FESEM photomicrograph, TEM image and XRD analyses. These analytical observations have revealed that the nano-sized polycrystalline calcium silicate particles are formed after about 6 h of ball milling and they are spheroidal in shape. The average particle size of the as-generated calcium silicate nanocrystalline powders is found to be around 21 nm which decreases with increasing ball milling but increases with annealing at elevated temperature.

Ultra-High Temperature Gratings

Regenerated gratings seeded by type-I gratings are shown to withstand temperatures beyond 1000 ℃. The method of regeneration offers a new approach to increasing temperature resistance of stable fibre Bragg and other gratings. These ultra-high temperature （UHT） gratings extend the applicability of silicate based components to high temperature applications such as monitoring of smelters and vehicle and aircraft engines to high power fibre lasers.

Core Shell Au Ag Nanoparticles in Dielectric Nanocomposites with Plasmon-Enhanced Fluorescence: A New Paradigm in Antimony Glasses

The nano era demands the synthesis of new nanostructured materials,if possible by simplified techniques,with remarkable properties and versatile applications.Here,we demonstrate a new single-step reproducible melt-quench methodology to fabricate core-shell bimetallic(Au0 Ag0)nanoparticles(2889 nm)embedded glasses(dielectrics)by the use of a new reducing glass matrix,K_(2)O B_(2)O_(3) Sb_(2)O_(3)(KBS)without applying any external reducing agent or multiple processing steps.The surface plasmon resonance(SPR)band of these nanocomposites embedded in KBS glass is tunable in the range 554-681 nm.More remarkably,taking advantage of the selective reduction capability of Sb_(2)O_(3),this single-step methodology is used to fabricate inter-metallic:rare-earth ions co-embedded(AuAg:Sm^(3+))dielectric(glass)-based-dnanocomposites and study the effect of enhanced local fi eld on the red upconversion fl uorescence of Sm^(3+)ions at 636 nm.The enhancement is found to be about 2 folds.This single-step in-situ selective reduction approach can be used to fabricate a variety of hybrid-nanocomposite devices for laser based applications(see supplementary information).

Self-starting harmonic mode-locked Tm-Bi co-doped germanate f iber laser with carbon nanotube-based saturable absorber

We report a ring cavity passively harmonic mode-locked fiber laser using a newly developed thulium- bismuth co-doped fiber （TBF） as a gain medium in conjunction with a carbon nanotube （CNT）-based saturable absorber. The TBF laser generates a third harmonic mode-locked soliton pulse train with a high repetition rate of 50 MHz and a pulse duration of 1.86 ps. The laser operates at 1 901.6 nm with an average power of 6.6 mW, corresponding to a pulse energy of 0.132 nJ, at a 1 552 nm pump power of 723.3 roW.

Ytterbium-sensitized thulium-doped fiber laser with a single-mode output operating at 1900-nm region

A single-mode laser is demonstrated using a newly developed double-clad thulium-ytterbium-doped fiber （TYDF） in a linear cavity formed by two fiber Bragg gratings （FBGs）. The YTF used is drawn from a D-shape preform fabricated using the modified chemical vapor deposition and solution doping technique. The laser is operated at 1 901.6 nm via the transition of thulium ions from 3F4 to 3H6 with the assistance of ytterbium to thulium ion energy transfer. The efficiencies of the laser are 0.71% and 0.75% at 927- and 905-nm multimode pumping, respectively. The thresholds of the launched pump power for 927- and 905-nm pumping are 1 314 and 1 458 mW, respectively. A 7-mW output is obtained at a 905-nm pump power of 2 400 mW.