Leaching and mass transfer characteristics of elements from ion-adsorption type rare earth ore

The differences in the leaching and mass transfer characteristics of ion-adsorption type rare earth ore between rare earth and non-rare earth impurities were investigated. It is determined that the leaching kinetics of rare earths （REs）, Mg and Ca could be described by the shrinking-core model. The leaching rate is controlled by inner diffusion and is in the order of Mg 〉 Ca 〉 RE. The apparent activation energy is 8.48, 6.79 and 6.32 kJ·mol^-1, respectively. In leaching system of Al, the leaching efficiency decreases with the increase in temperature because of hydrolysis reactions. The leaching efficiency of aluminum increases firstly and then decreases with the passage of time when the temperature is higher than 35 ℃. Besides, there is a good consistency in leaching characteristics and mass transfer, and the order of the time-to- peak is Mg 〈 Ca 〈 RE 〈 Al. Therefore, rare earth and non-rare earth may be partly separated by expanding the separation coefficient. The research could provide a theoretic basis for the separation of rare earth and non-rare earth impurities. Furthermore, compound leaching with magnesium salt and calcium salt is innovatively proposed to solve the problem of calcium and magnesium nutrient loss in the soil as well as eliminate ammonia-nitrogen emissions from the source.

Reduction leaching of rare earth from ion-adsorption type rare earths ore with ferrous sulfate

The practice ofin-situ leaching of the ion-adsorption type rare earths ore with ammonium sulfate could only leach most of rare earth in ion-exchangeable phase, but not the colloidal sediment phase. Therefore, the reduction leaching of rare earth from the ion-adsorption type rare earths ore with ferrous sulfate was innovatively put forward. The soak leaching process and the column leaching process were investigated in the present study. It was determined that ion-exchangeable phase could be released, and part of colloidal sediment phase rare earth could be reduction leached by the cations with reduction properties. The mechanism of reduction leaching was discussed with the Eh-pH diagram of cerium. Moreover, the stronger reduction of reductive ions, the greater acidity of leaching agent solution, and the higher reductive ion concentration, could result in the higher rare earth efficiency and the bigger ce-rium partition in the leaching liquor. In the ferrous sulfate column leaching process, the rare earth leaching rate and the rare earth effi-ciency were a little higher than with （NH4）2SO4 agent, and the rare earth efficiency and the partitioning of cerium in leaching liquor could be about 102% and 5.31%, respectively. However, the ferrous sulfate leaching process revealed some problems, so compound leaching with magnesium sulfate and a small amount of ferrous sulfate was proposed to an excellent alternative leaching agent for further studies, which may realize efficiency extraction and be environment-friendly.

Mineral properties and leaching characteristics of volcanic weathered crust elution-deposited rare earth ore

Weathered crust elution-deposited rare earth ore is an important resource of rare earths, including grantic weathered crust elution-deposited rare earth ore and volcanic weathered crust elution-deposited rare earth ore. The development condition of the weathered crust, weathering degree and mineral composition of these ores will be different because of the differences between their parent rocks and weathered crust causes of mineralogy path. Therefore, mineral properties and leaching characteristics of volcanic weathered crust elution-deposited rare earth ore from Chongzuo（CZ）, Guangxi province were investigated. It was found that the CZ rare earth ore was a typical mid-yttrium and rich-europium ore, with the overall rare earth（REE） grade in ion-exchangeable phase of 0.15%. Partide size classification showed that finer particle had a higher REE grade. Column leaching tests showed that the leaching efficiency of REE was above 94% with leaching agent concentration of 0.20 mol/L, liquid-solid ratio of 4：3, flow rate of 0.60 mL/min, and initial pH value around 5.67. Compared to ammonium sulfate leaching, magnesium sulfate leaching was advantaged by nearly zero ammonia nitrogen emission while their REE leaching was almost equivalent.