Coupling effect on the thermal hazard assessment of hazardous chemical materials via calorimetric technologies and simulation approaches

The coupling effect of heat absorption and release exists in the thermal decomposition of a few chemical materials.However,the impact of the above coupling on thermal hazard assessment is not considered in the literature studies.In this work,nitroguanidine(NQ)and 1,3,5-trinitro-1,3,5-triazine(RDX)are selected as representative materials to explore the influence of the coupling effect on the thermal hazard assessment of chemical materials.The linear heating experiments of NQ and RDX are carried out by a microcalorimeter and synchronous thermal analyser.The thermal decomposition curves are decoupled by advanced thermokinetics software.The thermal decomposition and kinetic parameters before and after decoupling are calculated.The results of TG experiment show that both NQ and RDX began to lose mass during the endothermic stage.The endothermic melting and exothermic decomposition of NQ and RDX are coupled within this stage.The coupling effect has different degrees of influence on its initial decomposition temperature and safety parameters.Compared with the parameters in the coupling state,the initial decomposition temperature and adiabatic induction period after decoupling decrease.The self-accelerating decomposition temperature increases,and internal thermal runaway time decreases.In the thermal hazard assessment of chemical materials with coupling effects,the calculated parameters after decoupling should be taken as an important safety index。

Interdigital MnO_(2)/PEDOT Alternating Stacked Microelectrodes for High-Performance On-Chip Microsupercapacitor and Humidity Sensing

For microelectronic devices,the on-chip microsupercapacitors with facile construction and high performance,are attracting researchers'prior consideration due to their high compatibility with modern microsystems.Herein,we proposed interchanging interdigital Au-/MnO_(2)/polyethylene dioxythiophene stacked microsupercapacitor based on a microfabrication process followed by successive electrochemical deposition.The stacked configuration of two pseudocapacitive active microelectrodes meritoriously leads to an enhanced contact area between MnO_(2)and the conductive and electroactive layer of polyethylene dioxythiophene,hence providing excellent electron transport and diffusion pathways of electrolyte ions,resulting in increased pseudocapacitance of MnO_(2)and polyethylene dioxythiophene.The stacked quasi-solid-state microsupercapacitors delivered the maximum specific capacitance of 43 mF cm^(-2)(211.9 F cm^(-3)),an energy density of 3.8μWh cm^(-2)(at a voltage window of 0.8 V)and 5.1μWh cm^(-2)(at a voltage window of 1.0 V)with excellent rate capability(96.6%at 2 mA cm^(-2))and cycling performance of 85.3%retention of initial capacitance after 10000 consecutive cycles at a current density of 5 mA cm^(-2),higher than those of ever reported polyethylene dioxythiophene and MnO_(2)-based planar microsupercapacitors.Benefiting from the favorable morphology,bilayer microsupercapacitor is utilized as a flexible humidity sensor with a response/relaxation time superior to those of some commercially available integrated microsensors.This strategy will be of significance in developing high-performance on-chip integrated microsupercapacitors/microsensors at low cost and environment-friendly routes.

Properties of high cis-1,4 content hydroxyl-terminated polybutadiene and its application in composite solid propellants

In this paper,high cis-1,4 content hydroxyl-terminated polybutadiene(cis-HTPB)with different molecular weights was prepared through the oxidative cracking process using cis-butadiene rubber as raw material.Firstly,this article comprehensively compared the differences between cis-HTPB and conventional I-HTPB in terms of molecular weight distribution,functionality,viscosity,molecular polarity,and other physicochemical properties,which provided effective data support for its subsequent application.In addition,the reaction kinetics study showed that cis-HTPB with isocyanate curing agent has high reactivity,allowing it to be rapidly cured at low temperatures,and the cured elastomers had excellent mechanical properties,with tensile strength and elongation up to 1.89 MPa and 1100%,respectively.It was also found that cis-HTPB has extremely excellent low-temperature resistance,and the glass transition temperature(T_(g))of its cured elastomer is as low as-101℃.Based on the above studies,cis-HTPB is applied as a binder in composite solid propellants for the first time to investigate its practical performance,and the results indicated that cis-HTPB-based propellants have excellent process and mechanical properties.

Effect of neutral polymeric bonding agent on tensile mechanical properties and damage evolution of NEPE propellant

Introducing Neutral Polymeric bonding agents(NPBA) into the Nitrate Ester Plasticized Polyether(NEPE)propellant could improve the adhesion between filler/matrix interface, thereby contributing to the development of new generations of the NEPE propellant with better mechanical properties. Therefore,understanding the effects of NPBA on the deformation and damage evolution of the NEPE propellant is fundamental to material design and applications. This paper studies the uniaxial tensile and stress relaxation responses of the NEPE propellant with different amounts of NPBA. The damage evolution in terms of interface debonding is further investigated using a cohesive-zone model(CZM). Experimental results show that the initial modulus and strength of the NEPE propellant increase with the increasing amount of NPBA while the elongation decreases. Meanwhile, the relaxation rate slows down and a higher long-term equilibrium modulus is reached. Experimental and numerical analyses indicate that interface debonding and crack propagation along filler-matrix interface are the dominant damage mechanism for the samples with a low amount of NPBA, while damage localization and crack advancement through the matrix are predominant for the ones with a high amount of NPBA. Finally, crosslinking density tests and simulation results also show that the effect of the bonding agent is interfacial rather than due to the overall crosslinking density change of the binder.

Photochemical reactions of poly(3-butoxythiophene-2,5-diyl) with chloroform

Photochemical reactions of poly(3-butoxythiophene-2,5-diyl) with chloroform under irradiation with light were studied. The reactions were separately carried out under air, oxygen, and nitrogen. The obtained results showed that this reaction belongs to the pseudo-first-order reaction with a rate constant kobs of 1.4×10?5 s?1 at room temperature. The presence or absence of air, oxygen, and nitrogen did not have obvious effects on the reaction rate under irradiation with light.

Sulfide-Based All-Solid-State Lithium-Sulfur Batteries:Challenges and Perspectives

Lithium-sulfur batteries with liquid electrolytes have been obstructed by severe shuttle effects and intrinsic safety concerns.Introducing inorganic solid-state electrolytes into lithium-sulfur systems is believed as an effective approach to eliminate these issues without sacrificing the high-energy density,which determines sulfidebased all-solid-state lithium-sulfur batteries.However,the lack of design principles for high-performance composite sulfur cathodes limits their further application.The sulfur cathode regulation should take several factors including the intrinsic insulation of sulfur,well-designed conductive networks,integrated sulfur-electrolyte interfaces,and porous structure for volume expansion,and the correlation between these factors into account.Here,we summarize the challenges of regulating composite sulfur cathodes with respect to ionic/electronic diffusions and put forward the corresponding solutions for obtaining stable positive electrodes.In the last section,we also outlook the future research pathways of architecture sulfur cathode to guide the develop high-performance all-solid-state lithium-sulfur batteries.

Anti-Melanogenesis Activity of Supercritical Carbon Dioxide Extract from Perilla frutescens Seeds

Perilla frutescens seed (PFS) oil is reported to inhibit skin photoaging;however, its effect on melanogenesis has not yet been investigated. Herein, we tested the anti-melanogenesis activity of an oil-based extract from PFS with supercritical carbon dioxide (scCO2). In a cell culture system, B16 mouse melanoma cells were treated with the PFS scCO2 extract and other samples. The PFS scCO2 extract decreased melanin production by approximately 90% in B16 mouse melanoma cells without cytotoxicity at 100 μg/mL. This effect was greater than that of the well-known melanogenesis inhibitor, kojic acid. Although a hexane-extracted PFS oil and a squeezed PFS oil also decreased melanin production in the B16 cells, the inhibitory effect of the PFS scCO2 extract was higher than both of these. Chemical analysis of the PFS scCO2 extract and squeezed PFS oil showed that almost 90% of the components of both oils were α-linolenic acid, linoleic acid, and oleic acid. Furthermore, the ratio of those three fatty acids across both samples was almost the same. When the three fatty acids were mixed in the same ratio as in the PFS scCO2 extract, the IC50 of the mixture for melanin production in B16 melanoma cells was identical to that of the PFS scCO2 extract. However, the IC50 of the squeezed PFS oil was approximately 6.6 times higher than that of the mixture. Although those fatty acids are the main inhibitory ingredients against melanin production in all of the extracts, some factor(s) in the squeezed PFS reduce their affinity with the cells. These results indicated that the PFS scCO2 extract could be a superior melanogenesis inhibitor. Although its main ingredients are probably the same as those of the squeezed PFS oil, it is necessary to extract with scCO2 for stronger anti-melanogenesis activity.

Fabrication of electrostatic safety copper azide film with in situ growing MOF

Due to its extremely low electrostatic sensitivity,copper azide primary explosive is greatly limited in practical applications.In this study,a composite film with Cu-MOF in-situ growth on carbon nanofilm was prepared by electrospinning and solvothermal methods,and CNF@Cu-N3film with electrostatic safety was obtained by carbonization and azide later.Its electrostatic sensitivity(E50)was greatly increased from 0.05 mJ of raw materials to 4.06 mJ,and still maintained a good detonation performance which could successfully detonate the CL-20 secondary explosive.This is mainly due to the synergistic effect of the carbon film and the MOF structure,which greatly improves the conductivity of the entire system and the uniform distribution of copper particles,providing a new preparation strategy for metal azide film that is suitable for the micro-initiator device.

Validation of High Performance Liquid Chromatography with Fluorescence Detector Methods for Determination of Aflatoxins in Different Food and Animal Feed Samples

Method validation for quantitative analysis of aflatoxins, AFB1, AFB2, AFG1 and AFG2 in sorghum, peanut butter, groundnut and animals feed is presented. Aflatoxins were extracted with a mixture of methanol: acetonitrile: water (60:30:10) and cleaned with Alfa test IAC chromatography before analysis by High Performance Liquid Chromatography coupled with fluorescence detection (HPLC-FLD) by adopting an isocratic chromatographic system using a mobile phase consisting acetic acid: acetonitrile: methanol (59:14:27), the separation of the four aflatoxins was achieved in less than 15 minutes. Calibration curves were linear over the concentration range from 2 - 18 ng/mL for AFB1 and AFG1, 0.4 - 3.6 ng/mL for AFB2 and AFG2, respectively. The LOD and LOQ in spiked samples were found to be 0.02 and 0.05 μg/kg for both AFB1 and AFG1, 0.01 and 0.03 μg/kg for both AFB2 and AFG2. The mean recovery values were in range from 84.2% to 96.9% was obtained. Five samples were found to be contaminated with aflatoxins and the total aflatoxins ranged from 0.02 to 3.26 μg/kg were obtained. Nineteen different samples were found to be contaminated with aflatoxins;the total aflatoxins ranged from 0.27 to 10.48 μg/kg were obtained. The highest total aflatoxins value was obtained in animal feeds.

Esterification of levulinic acid to n-butyl levulinate over heteropolyacid supported on acid-treated clay

Levulinic acid has been identified as a promising green, biomass-derived platform chemical. n-Butyl levulinate is used as an important intermediate having diverse applications. The present work focuses on the synthesis of n-butyl levulinate by esterification of levulinic acid with n-butanol using heteropolyacid （HPA） supported on acid-treated clay montmorillonite （K10）. 20% （w/w） dodecatungestophosphoric acid （DTPA） supported on K10 was found to be the most efficient catalyst with 97% levulinic acid conversion and 100% selectivity towards n-butyl levulinate. Effects of various process parameters were studied to examine the efficacy of 20% （w/w） DTPA/K10 for optimization of the activity.

Antioxidants,inflammation and cardiovascular disease

Multiple factors are involved in the etiology of cardiovascular disease(CVD). Pathological changes occur in a variety of cell types long before symptoms become apparent and diagnosis is made. Dysregulation of physiological functions are associated with the activation of immune cells,leading to local and finally systemic inflammation that is characterized by production of high levels of reactive oxygen species(ROS). Patients suffering from inflammatory diseases often present with diminished levels of antioxidants either due to insufficient dietary intake or,and even more likely,due to increased demand in situations of overwhelming ROS production by activated immune effector cells like macrophages. Antioxidants are suggested to beneficially interfere with diseases-related oxidative stress,however the interplay of endogenous and exogenous antioxidants with the overall redox system is complex. Moreover,molecular mechanisms underlying oxidative stress in CVD are not fully elucidated. Metabolic dybalances are suggested to play a major role in disease onset and progression. Several central signalingpathways involved in the regulation of immunological,metabolic and endothelial function are regulated in a redox-sensitive manner. During cellular immune response,interferon γ-dependent pathways are activated such as tryptophan breakdown by the enzyme indoleamine 2,3-dioxygenase(IDO) in monocyte-derived macrophages,fibroblasts,endothelial and epithelial cells. Neopterin,a marker of oxidative stress and immune activation is produced by GTP-cyclohydrolase Ⅰ in macrophages and dendritic cells. Nitric oxide synthase(NOS) is induced in several cell types to generate nitric oxide(NO). NO,despite its low reactivity,is a potent antioxidant involved in the regulation of the vasomotor tone and of immunomodulatory signaling pathways. NO inhibits the expression and function of IDO. Function of NOS requires the cofactor tetrahydrobiopterin(BH4),which is produced in humans primarily by fibroblasts and endothelial cells. Highly toxic peroxynitrite(ONOO-) is formed solely in the presence of superoxide anion(O2-). Neopterin and kynurenine to tryptophan ratio(Kyn/Trp),as an estimate of IDO enzyme activity,are robust markers of immune activation in vitro and in vivo. Both these diagnostic parameters are able to predict cardiovascular and overall mortality in patients at risk. Likewise,a significant association exists between increase of neopterin concentrations and Kyn/Trp ratio values and the lowering of plasma levels of vitamin-C,-E and-B. Vitamin-B deficiency is usually accompanied by increased plasma homoycsteine. Additional determination of NO metabolites,BH4 and plasma antioxidants in patients with CVD and related clinical settings can be helpful to improve the understanding of redox-regulation in health and disease and might provide a rationale for potential antioxidant therapies in CVD.

Synthesis and characterization of lower generation broom molecules

Dendritic molecules with dodecyl groups as the hyperbranchs were synthesized in methanol by Michael addition with dodecylamine and methyl acrylate as raw materials. This new-type dendritic molecules were called vividly ＂broom molecules＂ in this report. The surface tension of the aqueous solution of broom molecule terminated amino group was measured by using the dropvolume method. The demulsification performance of the broom molecules for the oil/water （O/W） simulated crude oil emulsion was examined. The experimental results revealed that, as a new-type of surfactants, the broom molecules terminated amino groups showed demulsification for the O/W simulated crude oil emulsion. 2007 Jun Wang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All fights reserved.

Synthesis of ethyl acetate by esterification of acetic acid with ethanol over a heteropolyacid on montmorillonite K10

In present work,liquid phase esterification of acetic acid with ethanol over dodecatungestophosphoric acid （DTPA） supported on K10 montmorillonite was systematically studied and optimization of process parameters was carried out.The 20% m/m DTPA/K10 was found to be the optimum catalyst with 90% acetic acid conversion and 100% ethyl acetate selectivity.The study was also explored to see the feasibility of 20% m/m DTPA/K10 as a catalyst for the alkylation of acetic acid with other alcohols like methanol,iso-propanol and n-butanol.The 20% m/m DTPA/K10 has shown increased activity with the increase in carbon number,at the same alcohol reflux.The results are novel.

Toluene Alkylation to Selective Formation of p-Xylene over Co-Crystalline ZSM-12/ZSM-5 Catalyst

The alkylation of toluene with methanol to selective formation of p-xylene has been systematically studied. ZSM-12 （MTW）/ZSM-5 co-crystalline zeolite in 40：60 proportions have been synthesized by the same molar gel composition, but at different temperatures and periods than that of ZSM-12 and ZSM-5, separately. All the prepared samples are characterized by XRD, SEM, BET, and XRF. The activity of toluene alkylation was investigated with a mixture of toluene and methanol as a feed over the ZSM-12, ZSM-12/ZSM-5 co-crystalline, ZSM-5, and physical mixture of ZSM-12/ZSM-5. From characterization, it is observed that the ZSM-12/ZSM-5 co-crystalline material is different from that of ZSM-12, ZSM-5, and their physical mixture. Further, the ZSM-12/ZSM-5 co-crystalline zeolite produces the highest content of xylene and has better selectivity for p-xylene than ZSM-12, ZSM-5, and their physical mixture.

Influence of alkali metal doping on surface properties and catalytic activity/selectivity of CaO catalysts in oxidative coupling of methane

Surface properties （viz. surface area, basicity/base strength distribution, and crystal phases） of alkali metal doped CaO （alkali metal/Ca= 0.1 and 0.4） catalysts and their catalytic activity/selectivity in oxidative coupling of methane （OCM） to higher hydrocarbons at different reaction conditions （viz. temperature, 700 and 750 ℃; CH4/O2 ratio, 4.0 and 8.0 and space velocity, 5140-20550 cm^3 ·g^-1·h^-1） have been investigated. The influence of catalyst calcination temperature on the activity/selectivity has also been investigated. The surface properties （viz. surface area, basicity/base strength distribution） and catalytic activity/selectivity of the alkali metal doped CaO catalysts are strongly influenced by the alkali metal promoter and its concentration in the alkali metal doped CaO catalysts. An addition of alkali metal promoter to CaO results in a large decrease in the surface area but a large increase in the surface basicity （strong basic sites） and the C2＋ selectivity and yield of the catalysts in the OCM process. The activity and selectivity are strongly influenced by the catalyst calcination temperature. No direct relationship between surface basicity and catalytic activity/selectivity has been observed. Among the alkali metal doped CaO catalysts, Na-CaO （Na/Ca = 0.1, before calcination） catalyst （calcined at 750 ℃）, showed best performance （C2＋ selectivity of 68.8% with 24.7% methane conversion）, whereas the poorest performance was shown by the Rb-CaO catalyst in the OCM process.

Toluene Alkylation with Methanol to p-Xylene over Heteropoly Acids Supported by Clay

The alkylation of toluene with methanol for the selective formation of p-xylene was systematically studied. Very few studies have been reported on the use of superacids such as heteropolyacids on cheap supports, such as clay. This article deals with the use of different heteropoly acids （HPAs）, viz, Dodeca-Tungstophosphoric acid [H3PO4.12WO3.xH2O] （TPA）, Dodeca-Molyhdo phosphoric acid ammonium salt hydrate [H12Mo12N3O40P＋aq] （DMAA）, Dodeca-Molyhdo Phosphoric acid （PMA） on clay （MontmoriUonite, K-10） and as such plain clay. This comparative study reveals that 20%PMA/Clay shows 62% toluene conversion and 100% selectivity toward p-xylene.

Acute effects of chlorpyryphos-ethyl and secondary treated effluents on acetylcholinesterase and butyrylcholinesterase activities in Carcinus maenas

The acute effects of commercial formulation of chlorpyrifos-ethyl （Dursban ） and the secondary treated industrial/urban effluent （STIUE） exposure on acetylcholinesterase （ACHE） and butyrylcholinesterase （BuChE） activities in hepatopancreas and gills of Mediterranean crab Carcinus maenas were investigated. After 2 d of exposure to chlorpyriphos-ethyl, the AChE activity was inhibited in both organs at concentrations of 3.12 and 7.82 μg/L, whereas the BuCHE was inhibited only at higher concentration 7.82 μg/L of commercial preparation Dursban~. The exposure of crabs to Dursban （3.12 μg/L） showed a significant decrement of ACHE activity at 24 and 48 h, whereas the BuChE was inhibited only after 24 h and no inhibition for both enzymes was observed after 72 h. Moreover, a significant repression of AChE activity was observed in both organs of C. maenas exposed to 5% of STIUE. Our experiments indicated that the measurement of AChE activity in gills and hepatopancreas of C. maenas would be useful biomarker of organophosphorous （OP） and of neurotoxic effects of STIUE in Tunisia.

Molecular dynamics study on growth of carbon dioxide and methane hydrate from a seed crystal

In the current work,molecular dynamics simulation is employed to understand the intrinsic growth of carbon dioxide and methane hydrate starting from a seed crystal of methane and carbon dioxide respectively.This comparison was carried out because it has relevance to the recovery of methane gas from natural gas hydrate reservoirs by simultaneously sequestering a greenhouse gas like CO2.The seed crystal of carbon dioxide and methane hydrate was allowed to grow from a super-saturated mixture of carbon dioxide or methane molecules in water respectively.Two different concentrations(1:6 and 1:8.5)of CO2/CH4 molecules per water molecule were chosen based on gas–water composition in hydrate phase.The molecular level growth as a function of time was investigated by all atomistic molecular dynamics simulation under suitable temperature and pressure range which was well above the hydrate stability zone to ensure significantly faster growth kinetics.The concentration of CO2 molecules in water played a significant role in growth kinetics,and it was observed that maximizing the CO2 concentration in the aqueous phase may not result in faster growth of CO2 hydrate.On the contrary,methane hydrate growth was independent of methane molecule concentration in the aqueous phase.We have validated our results by performing experimental work on carbon dioxide hydrate where it was seen that under conditions appropriate for liquid CO2,the growth for carbon dioxide hydrate was very slow in the beginning.

Synthesis of Pharmaceutical Intermediates by Toluene Benzylation over Heteropoly Acids on Different Support

Selective formation of pharmaceutical intermediates like diphenylmethane, dimethyldiphenylmethane, benzyl toluene and benzoic acid by liquid phase, toluene benzylation with benzyl chloride as a benzylating agent, was systematically studied over plane clay （K-10, montmorillonite）, plane H-Beta, plane MFI structured titanosilicate （TS-1） and heteropoly acids [HPA, namely dodecatungstophosphoric acid [H3PO4.12WOa-xH2O] （TPA）, dodeca-molybdo phosphoric acid ammonium salt hydrate [H12Mo12N3040P＋aq] （DMAA）, sodium tungstate hydrated purified [Na12WO4.2H2O] （STH）] supported on clay, H-beta and TS-1. The 20%TPA/Clay, 30%TPA/H-Beta and 30%TPA/TS-1, were observed to be the best catalyst samples over plane clay, plane H-Beta and plane TS-1. The catalyst samples are compared with respect to benzyl chloride conversion and selectivities for diphenylmethane, dimethyl-diphenylmethane, benzyl toluene and benzoic acid. The reaction follows the pseudo-first order rate power law model. The apparent rate constants are calculated and compared with the reported ones.

Highly selective catalysts for the hydrogenation of alkynols:A review

The semi-hydrogenation of alkynols to enols is a crucial process in the production of pharmaceuticals,agrochemicals,fragrances,and flavors that involves a complex set of parallel and consecutive isomerization and hydrogenation reactions and proceeds via several key intermediates.In view of the industrial importance of large-scale enol production through alkynol hydrogenation,various noble and non-noble metal(e.g.,Ni and Pd)-based catalysts promoting this transformation have been developed.This paper reviews the design of highly selective catalysts for the semi-hydrogenation of alkynols,focusing on the role of additives,second metals,catalyst supports,and reaction conditions and combining catalytic reaction kinetics with theoretical calculations to establish the reaction mechanism and the decisive factors for boosting selectivity.Finally,a strategy for designing highly efficient and selective catalysts based on the characteristics of aqueous-phase alkynol hydrogenation is proposed.