This paper was concerned with the tensile mechanics behavior of the composite π-joint under static tensile loading. The numerical strength analysis methodology was presented containing the basis assumption for the an...This paper was concerned with the tensile mechanics behavior of the composite π-joint under static tensile loading. The numerical strength analysis methodology was presented containing the basis assumption for the analysis, the material modeling, and the selected element type. It was assumed that the composite ply had transverse isotropic material properties and the adhesive had linear elastic properties. With the goal of the strength analysis to determine the onset of the damage initiation and the ultimate failure load, two stiffness degradation models were discussed and a modified maximum stress failure criteria was presented. To verify the numerical model, a pull-off test scheme was performed and the experimental data of five specimens were given. The experimental results indicate that the damage initiation location and the failure load were consistent with numerical predictions and verified the feasibility of the numerical model.展开更多
A method to measure temporal and spatial evolution of sheath in plasma immersion ion implantation （PIII） process is presented. A long Langmuir probe （Ф5 mm× Ф78 mm） with low bias is used to detect the sheat...A method to measure temporal and spatial evolution of sheath in plasma immersion ion implantation （PIII） process is presented. A long Langmuir probe （Ф5 mm× Ф78 mm） with low bias is used to detect the sheath propagation and backup with time. The substrate made of A1 cylinder （Ф 20 mm×Ф 150 mm） is immersed in nitrogen and argon plasma induced by magnetron self-sustained discharge. The maximum sheath sizes, at different plasma densities under different discharge currents, are measured and compared.展开更多
文摘This paper was concerned with the tensile mechanics behavior of the composite π-joint under static tensile loading. The numerical strength analysis methodology was presented containing the basis assumption for the analysis, the material modeling, and the selected element type. It was assumed that the composite ply had transverse isotropic material properties and the adhesive had linear elastic properties. With the goal of the strength analysis to determine the onset of the damage initiation and the ultimate failure load, two stiffness degradation models were discussed and a modified maximum stress failure criteria was presented. To verify the numerical model, a pull-off test scheme was performed and the experimental data of five specimens were given. The experimental results indicate that the damage initiation location and the failure load were consistent with numerical predictions and verified the feasibility of the numerical model.
基金High Energy Density Beam Processing Key Laboratory Foundation of China(No.9140C45020106)
文摘A method to measure temporal and spatial evolution of sheath in plasma immersion ion implantation （PIII） process is presented. A long Langmuir probe （Ф5 mm× Ф78 mm） with low bias is used to detect the sheath propagation and backup with time. The substrate made of A1 cylinder （Ф 20 mm×Ф 150 mm） is immersed in nitrogen and argon plasma induced by magnetron self-sustained discharge. The maximum sheath sizes, at different plasma densities under different discharge currents, are measured and compared.
