The causes and environmental effects of land use conversion during agricultural restructuring in Northeast China

During the last decade of the 20th century, extensive conversion inagricultural land use took place in Northeast China. The goal of this study is to ascertain itsspatial distribution and regional differentiation, determine its causes, and analyze itsenvironmental impact. Especially we attempt to elucidate how institutional constraints havefacilitated the change at a time of agrarian restructuring when newly emerging free market washybridized with the former planned economy. Information on six categories of land use was mappedfrom interpretation of Landsat TM images recorded in 1990, 1995 and 2000. Most of land use changestook place during the first half of the decade, coinciding with abrupt and chaotic changes ingovernment directives. Farmland was changed mainly to woodland, water body and built-up areas whilewoodland and grassland were converted chiefly to farmland. Spatially, the change from farmland towoodland was restricted to the west of the study area. The change from grassland to farmland tookplace in the grazing and farming interlocked west. These chaotic and occasionally conflictingchanges were largely caused by lack of stability and consistency in agricultural land use policiespromulgated. They have exerted adverse impacts on the local environment, including land degradation,increased flooding, and modified climate regime.

Influence of the modified global ocean tide model with local tides of East and South China Seas on load gravity in China and its neighbor area

By using 11 global ocean tide models and tidal gauge data obtained in the East China Sea and South China Sea, the influence of the ocean loading on gravity field in China and its neighbor area is calculated in this paper. Furthermore, the differences between the results from original global models and modified models with local tides are discussed based on above calculation. The comparison shows that the differences at the position near the sea are so large that the local tides must be taken into account in the calculation. When the global ocean tide models of CSR4.0, FES02, GOT00, NAO99 and ORI96 are chosen, the local effect for M2 is less than 0.10 × 10-8 m·s-2 over the area far away from sea. And the local effect for O1 is less than 0.05 × 10-8 m·s-2 over that area when choosing AG95 or CSR3.0 models. This numerical result demonstrates that the choice of model is a complex problem because of the inconsistent accuracy of the models over the areas of East and South China Seas.

Comparison of growth and survival of larvae among different shell color stocks of bay scallop Argopecten irradians irradians(Lamarck 1819)

In order to improve production and breed new broods of bay scallop Argopecten irradians irradians, different-colored orange, purple and white lines were established by two mating methods of self-fertilization and mass spawning at a commercial scallop hatchery in spring, 2002. And then larval growth and survival of different lines was compared to test whether there is a relationship between shell color and growth and survival at early developmental stage. Both growth and survival have no significant differences among different experimental larvae of self-fertilization or mass spawning. Results are as following in the order of orange, purple and white shell stock. For the self-fertilization, growth rates of larvae were 6.174, 6.412, and 6.599 μm/d, respectively. Survival rates of larvae at Day 3 were 74.41%, 76.86%, and 82.05%; Day 6 were 49.14%, 65.63%, and 52.79%; and Day 9 were 25.06%, 20.80%, and 26.47%, respectively. For the mass spawning, the growth rates were 7.836, 7.941, and 7.878 μm/d, respectively. Survival rates at Day 3 were 93.05%, 91.95%, and 92.50%; Day 6 were 79.17%, 78.05%, and 82.50%; and Day 9 were 34.72%, 36.67%, and 38.33%, respectively. The absence of any relationship between shell color and growth and survival at the larval stage may be resulted from their common genetic basis.

Distribution characteristics of SOM and nitrogen on the eastern slope of Gongga Mountain

The distribution of soil organic matter (SOM) and nitrogen on Gongga Mountain was studied in this paper. The results showed that the content of SOM and nitrogen (N) of A horizon had an ascending trend with the increase of the elevation. The vegetation types distributed higher than the mixed broad-leaved and coniferous forest have the irregular trends. In the transitional zone vegetation such as mixed trees and treeline, the content of SOM and N is higher than other vegetation types. The distribution of SOM and N of A horizon is dependent on the synthetic effect of climate and vegetation types. The vertical distribution of SOM and N in soil profiles has the similar trends for all kinds of vegetation types, i.e., the content of A horizon is higher than that of the B and C horizons, which is the same to the distribution of dead animal and plant in soil. The soil C:N is between 7 and 25, which is relatively low comparing to the appropriate C:N of 25-30. The ratio of soil carbon to nitrogen (C:N)increases with the increase of the elevation, but its vertical distribution in soil horizons varies with different vegetation types. The N exists in SOM mainly in the form of organic nitrogen, and the soil C:N correlates significantly with SOM.

Spatial variability and pattern analysis of soil properties in Dehui city, Jilin province

Based on regionalized variable theory, semivariograms of geo-statistics wereused to research the spatial variation of soil properties quantitatively. The results showed thatthe semivariogram of soil organic matter is best described by spherical model, the best model forsemivariograms of soil total N and available K is exponential models and that of available P belongsto linear with sill model. Those soil properties have different spatial correlations respectively,the lag of organic matter is the highest and that of available P is the lowest, the spatialcorrelation of N and available K belongs to moderate degree. Spatial heterogeneities are differenttoo, the degree of organic matter and total N are higher, the degree of available K is in the nextplace and that of available P is the lowest. Influenced by the shape, topography and soil of thestudy area, all isotropies of available P are obvious in all directions while anisotropies of othersare manifested. According to the analytical results, supported by GIS, Kriging and IDW methods areapplied to describe and analyze the spatial distribution of soil properties. The results indicatethat soil organic matter, total N and available K are distributed regularly from northeast tosouthwest, while available P is distributed randomly.

Application of observed strain steps to the study of remote earthquake stress triggering

A study of the Kunlunshan earthquake of MS = 8.1 based on observed coseismic strain steps from the borehole strain monitoring network over China has been carried out with some interesting results. Firstly, many recordings disagree with theoretic calculation using static dislocation model. Secondly, abnormally large strain steps are ob-served at quite a few stations in the tectonically active east-northern China, while in the relatively inactive east-southern China no obvious steps are recorded. It is inferred that seismic stress triggering may significantly affect remote seismic strain field. In other words, whether remote faulting be seismically triggered or not may de-termine the pattern of local seismic strain changes. Further comparison study results of March 11, 1999 Zhangbei earthquake and November 1, 1999 Datong earthquake show that the specific pattern of seismic zones has obvious influence on seismic strain changes in the region. This supports the idea that observed abnormal strain steps might be produced by coseismicly stress-triggered local faulting.

Numerical Si mulation of Transportation of SPMfrom the Yellow River to the Bohai Sea

A 3D diagnostic model including a suspended sediment transport module, ECOMSED, driven by the monthly discharge and sediment load of the Yellow River in 1983 ～ 1984, was applied to the Bohai Sea. The simulation of the temporal-spatial variation of SPM （Suspended Particular Matter） concentration, sediment flux, and deposition rate was carfled out. It could be seen that, the SPM concentration exhibited distinct seasonal variation, and the variation characteristic was similar for two years. Some of the fine sediment of the Yellow River extended to the western bank of the Liaodong Bay, but most of the sediment deposited around the estuary of the Yellow River, the deposition flux rapidly decreasing with the increasing distance to the estuary. The deposition rate kept at 0.05 ～ 0.1 mm/a for most area, close to the insitu data. There were two areas of high SPM concentration in the Bohai Sea, one of which could be attributed to the Yellow River discharge, and another one, located at the seas with intensive resuspension power, to the tidal current energy. The sediment from the Yellow River was transported mainly along the track of the, Lagrangian residual cireulations. In one word, the suspended load transport was basically attributed to the wind-driven and tidal-induced Lagrangian residual circulations. The resuspenslon flux was related to the bottom currents： the larger the current speed, the more the sediment resuspended.

Proteome Analysis of Inhibitory Effect of Gadolinium on Sinorhizobium fredii

The inhibitory effect of gadolinium on Sinorhizobium fredii USDA 205 was studied on a global scale using twodimensional gel electrophoresis and MALDI-TOF MS. The results indicated that 22 proteins were significantly affected by 1 mmol · L^-1 Gd^3 ＋ treatment when compared with an untreated control. Among these proteins, nine were up-regulated and thirteen were down-regulated. The differently expressed proteins were classified into 8 functional categories based on their functions, including transporters, proteins for cellular defence, and proteins involved in metabolism.

Investigations on Valence-Change Behaviors of Europium Ions in Eu-Doped Aluminate and Silicate Phosphors

Compounds of Sr3Al2O6 ： Eu, SrgAl14O25 ： Eu, and BaZnSiO4 ： Eu were synthesized by high-temperature solid state reactions. The doping Eu^3 ＋ ions were partially reduced to Eu^2＋ in Sr4Al14O25：Eu and BaZnSiOg：Eu prepared in an oxidizing atmosphere, N^2 ＋ O2. However, such an abnormal reduction process could not be performed in Sr3Al2O6：Eu, which was also prepared in an atmosphere of N^2 ＋ O2. Moreover, even though Sr3A1EO6：Eu was synthesized in a reducing condition CO, only part of the Eu^3 ＋ ions was reduced to Eu^2 ＋ . The existence of trivalent and divalent europium ions was confirmed by photoluminescent spectra. The different valence-change behaviors of europium ions in the hosts were attributed to the difference in host crystal structures. The higher the crystal structure stiffness, the easier the reduction process from Eu^3 ＋ to Eu^2 ＋ .

Photoluminescence Characteristics of Gd_2Mo_3O_9:Eu Phosphor Particles by Solid State Reaction Method

Eu^3＋-doped Gd2Mo3O9 was prepared by solid-state reaction method using Na2CO3 as flux and characterized by powder X-ray diffractometry. According to X-ray diffraction, this material belonged to a tetragonal system with space group I41/α. The effects of flux content and sintering temperature on the luminescent properties were investigated with the emission and excitation spectra. The results showed that flux content and sintering temperature had effects on the luminescent properties, the optimized flux content and the best temperature was 3 % and 800 ℃ respectively. The excitation and emission spectra also showed that this phosphor could be effectively excited by C-T band （280 nm）, ultraviolet light 395 nm and blue light 465 nm. The wavelengths at 395 and 465 nm were nicely fitting in with the widely applied output wavelengths of ultraviolet or blue LED chips. Integrated emission intensity of Gd2Mo3O9 ： Eu was twice higher than that of Y2O2S ： Eu^3 ＋ under 395 nm excitation. The Eu^3＋ doped Gd2Mo309 phosphor may be a better candidate in solid-state lighting applications.

Upconversion Luminescence of Ce^(3+) Doped BK7 Glass by Femtosecond Laser Irradiation

Near-infrared to visible upconversion luminescence was observed in a multicomponent silicate （BK7） glass containing Ce^3 ＋ ions under focused infrared femtosecond laser irradiation. The emission spectra show that the upconversion luminescence comes from the 4f-5d transition of the Ce^3 ＋ ions. The relationship between the intensity of the Ce^3 ＋ emission and the pump power reveals that a three-photon absorption predominates in the conversion process from the near-infrared into the blue luminescence. The analysis of the upconversion mechanism suggests that the upconversion luminescence may come from a three-photon simultaneous absorption that leads to a population of the 5d level in which the characteristic luminescence occurs.

Design and Implementation of Space Dust Database

Space debris is very dangerous to the security of on-the-orbit spacecrafts, and it is increasing in number at high speed with the expansion of human space exploration. Space debris has become a serious space pollutant noticed by many astronomers. The increase of space dust sources and the development of research on space dust urgently need space dust data sharing and exchanging. It is necessary for us to establish the Space Dust Database to realize the sharing and canonical management of the data. The Space Dust Database (SDD) management system, based on the 3-layer B/S computer mode, was designed and implemented in this paper. The system’s features include significantly improved runtime efficiency, good scalability and maintainability. The Space Dust Database can provide some scientific bases for the study of the chemical constituents, mineral composition, origin and sources of space dust, but also provide excellent data services and decision-making support for the protection of space and model construction of space dust.

Effects of Pd substitution for Ni on corrosion performances of Mg_(0.9)Ti_(0.1)Ni_(1-x)Pd_x hydrogen storage alloys

The Mg0.9Ti0.1Ni1?xPdx (x= 0, 0.05, 0.1, 0.15) hydrogen storage electrode alloys were prepared by mechanical alloying. The main phases of the alloys were determined as amorphous by X-ray diffraction(XRD). The corrosion potentials of the alloys were measured by open circuit potential measurements and the values are ?0.478, ?0.473, ?0.473 and ?0.471 V (vs Hg/HgO electrode) for x=0, 0.05, 0.1, 0.15, respectively. The corrosion currents of the studied alloys were obtained by non-linear fitting of the anodic polarization curve using Bulter-Volmer equation and Levenberg-Marquardt algorithm, which were obtained after different cycles. The initial corrosion currents of the alloys are decreased with the increasing of Pd content. The increasing of Pd content in the alloys inhibits the corrosion rates of the electrode alloys with the progress of cycle number. The electrochemical impedance spectroscopy(EIS) was conducted after open circuit potential of the alloys stabilizing. The impedance data fit well with the theoretical values obtained by the proposed equivalent circuit model. The corrosion resistances and the thickness of surface passive film of the alloys, which were deduced by the analyses of EIS, are enhanced with the increasing of Pd content in the alloys, which are consistent with the results of corrosion rates obtained from anodic polarization measurements.

Preparation and Upconversion Luminescence of Y_3Al_5O_(12):Yb^(3+),Er^(3+)Transparent Ceramics

YAG： 1% （atom fraction） Yb^3＋ , 0.5% （atom fraction） Er3＋ transparent ceramics were fabricated by the solid state reaction method using high-purity Y2O3, Al2O3, Yb2O3, and Er2O3 powders as starting materials. The mixed powder compact was sintered at 1760 ℃ for 6 h in vacuum and annealed at 1500 ℃ for 10 h in an air atmosphere. The ceramics consisted of about 10μm grains and exhibited a pore-free structure. The optical transmittance of the ceramics at 1064 nm was nearly 80%. Upconversion emissions were investigated on the ceramics pumped by a 980 nm continuous wave diode laser, and strong green emission centered at 523 and 559 nm and red emission centered at 669 nm were observed, which originated from the radiative transitions of ^2H11/2→^4I15/2, ^4S3/2→^4I15/2, and ^4F9/2→^4I15/2 of Er^3＋ ions, respectively.

Preparation and Identification of Monoclonal Antibodies Against Vibrio anguillarum

Monoclonal antibodies (Mabs) against V.anguillarum strain M3 are prepared, and their isotypes are also characterized. Among them, C1C5 is the only Mab which does not crossreact with other eleven non-V.anguillarum strains. The proteinase K digestion test shows that the epitopes recognized by C1C5, C6C3 and C6C32 Mabs contained protein. The periodate oxidation test showed that the epitopes recognized by Mabs except C1C5 are glycosylated. In addition, results of additivity test indicate that the epitopes recognized by C6C3 and C6C32 Mabs are similar, and quite different from those recognized by Mab C1C5.

Genetic study of Kelp “901” strain

Based on DNA extraction and optimization of random amplified reaction (RAPD) to the gametophytes and sporophytes of Kelp “901” strain, genetic study on variation was conducted to its parents and offsprings of F6, F7, F8, and F9 generation. RAPD results have shown that among 30 selected primers for gametophytes, 297 loci ranging from 200 to 3 000 bp were obtained in the average of 9.9 loci for each primer. This indicated a high polymorphic rate with RAPD detection. UPGMA (unweighted pair-group method arithmetic average) analysis showed that each male and female gametophyte of a generation could be clustered into one pair separately. The genetic distances of the Kelp 901 generation were 0.321 2–0.476 7, and the maximum was between F7 and F8 (0.476 7). Identity analysis showed that F6 generation was more close to the female parent (0.659 3), and F7 generation was more close to the male parent (0.578 8). To the sporophytes study in 24 selected primers for RAPD amplification, 191 loci ranging from 230-2 800 bp were obtained, in the average to each primer of 8.0 loci. The heterozygosity to six populations were male parent (0.223 9), female parent (0.107 2), F6 (0.216 4), F7 (0.228 6), F8 (0.229 6) and F9 (0.317 2). The nearest genetic distance was 0.083 5 (F8, F9). Total heterozygosity (HT) of F6, F7, F8 and F9 generations was 0.318 6, the average heterozygosity (HS) for F6, F7, F8 and F9 generations was 0.248 0, and deduced coefficient of population differentiation (Gst ) was 22.2%. Six sequence characterized amplified regions (SCAR) were preliminary screened through RAPD analysis. It needed to be verified in detail as they are significant for molecular marker assistance in breeding and selecting Laminaria.

Influence of Surface Geometry of Grating Substrate on Director in Nematic Liquid Crystal Cell

The director in nematic liquid crystal cell with a weak anchoring grating substrate and a strong anchoring planar substrate is relative to the coordinates x and z.The influence of the surface geometry of the grating substrate in the cell on the director profile is numerically simulated using the two-dimensional finite-difference iterative method under the condition of one elastic constant approximation and zero driven voltage.The deepness of groove and the cell gap affect the distribution of director.For the relatively shallow groove and the relatively thick cell gap,the director is only dependent on the coordinate z.For the relatively deep groove and the relatively thin cell gap,the director must be dependent on the two coordinates x and z because of the increased elastic strain energy induced by the grating surface.

Comparison of photocatalytic activity of TiO_2 film doped nonuniformly by Mn and Zn

The thin films of TiO2, doped by Mn or Zn with nonuniform distribution, were prepared by sol-gel method under process control. The actinic absorption of the catalyst thin films was evaluated by UV-vis spectrophotometry. And the activity of the photocatalyst was evaluated by photocatalytic degradation kinetics of aqueous methyl orange under UV radiation. The results show that the photocatalytic activity of the TiO2 thin film can be evidently enhanced by Mn non-uniformly doping in the bottom layer and can be decreased by Mn doping in the surface layer. The activity of TiO2 thin film can be evidently enhanced by Zn non-uniform doping in either the bottom or the surface layer. But the activity of TiO2 is less affected by uniformly Zn doping. The different mechanisms for enhanced photocatalytic activity of Mn or Zn non-uniformly doped titanium dioxide film were discussed in terms of the separation of photon-generated carrier in the TiO2 films.

Mechanisms of Fluorescence Quenching of Pr^(3+)-Doped PbWO_4 Crystal

Fluorescence decay curves of the ^3P0 and ^1D2 manifolds in Pr^3＋ doped PbWO4 crystal were measured at room temperature and fluorescence lifetimes of both manifolds were estimated. Combining with the radiative lifetimes of the manifolds calculated on the basis of the modified J-O theory, the main mechanisms for the fluorescence quenching of the manifolds were analyzed. The multi-phonon relaxation and the cross-relaxation energy transfer are the major reasons for the fluorescence quenching of the ^3P0 and ^1D2 manifolds, respectively. The Inokuti-Hirayama model was used to analyze the fluorescence decay curve of the ^1D2 manifold and the cross-relaxation of dlpole-dipole interaction was confirmed. Consequently, the ^3p0 manifold is more favorable as an upper laser level than the ^1D2 manifold.

The Electrical Conductivity of Gabbro at High Temperature and High Pressure

The electric conductivity of gabbro has been measured at 1.0-2.0 GPa and 320-700℃, and the conduction mechanism has been analyzed in terms of the impedance spectra. Experimental results indicated that the electric conductivity depends on the frequency of alternative current. Impedance arcs representing the conduction mechanism of grain interiors are displayed in the complex impedance plane, and the mechanism is dominated at high pressure. These arcs occur over the range of 10\+2-k×10\+5 Hz (k is the positive integer from 1 to 9). On the basis of our results and previous work, it is concluded that gabbro cannot form any high conductivity layer (HCL) in the middle\|lower crust.