Fracture prediction in the tight-oil reservoirs of the Triassic Yanchang Formation in the Ordos Basin,northern China

It is important to predict the fracture distribution in the tight reservoirs of the Ordos Basin because fracturing is very crucial for the reconstruction of the low-permeability reservoirs. Three-dimensional finite element models are used to predict the fracture orientation and distribution of the Triassic Yanchang Formation in the Longdong area, southern Ordos Basin. The numerical modeling is based on the distribution of sand bodies in the Chang 7a and 72 members, and the different forces that have been exerted along each boundary of the basin in the Late Mesozoic and the Cenozoic. The calculated results demonstrate that the fracture orientations in the Late Mesozoic and the Ceno- zoic are NW-EW and NNE-ENE, respectively. In this paper, the two-factor method is applied to analyze the distribution of fracture density. The distribution maps of predicted fracture density in the Chang 71 and 72 members are obtained, indicating that the tectonic movement in the Late Mesozoic has a greater influence on the fracture development than that in the Cenozoic. The average fracture densities in the Chang 71 and 72 members are similar, but there are differences in their distributions. Compared with other geological elements, the lithology and the layer thickness are the primary factors that control the stress distribution in the study area, which further determine the fracture distribution in the stable Ordos Basin. The predicted fracture density and the two-factor method can be utilized to guide future exploration in the tight-sand reservoirs.

Development of new technology for coal gasification purification and research on the formation mechanism of pollutants

Coal-fired power generation is the main source of CO_(2)emission in China.To solve the problems of declined efficiency and increased costs caused by CO_(2)capture in coal-fired power systems,an integrated gasification fuel cell(IGFC)power generation technology was developed.The interaction mechanisms among coal gasification and purification,fuel cell and other components were further studied for IGFCs.Towards the direction of coal gasification and purification,we studied gasification reaction characteristics of ultrafine coal particles,ash melting characteristics and their effects on coal gasification reactions,the formation mechanism of pollutants.We further develop an elevated temperature/pressure swing adsorption rig for simultaneous H_(2)S and CO_(2)removals.The results show the validity of the Miura-Maki model to describe the gasification of Shenhua bituminous coal with a good fit between the predicted DTG curves and experimental data.The designed 8–6–1 cycle procedure can effectively remove CO_(2)and H_(2)S simultaneously with removal rate over 99.9%.In addition,transition metal oxides used as mercury removal adsorbents in coal gasified syngas were shown with great potential.The techniques presented in this paper can improve the gasification efficiency and reduce the formation of pollutants in IGFCs.

Unsteady aerodynamic characteristics of a horizontal wind turbine under yaw and dynamic yawing

Horizontal axis wind turbine(HAWT)often works under yaw due to the stochastic variation of wind direction.Yaw also can be used as one of control methods for load reduction and wake redirection of HAWT.Thus,the aerodynamic performance under yaw is very important to the design of HAWT.For further insight into the highly unsteady characteristics aerodynamics of HAWT under yaw,this paper investigates the unsteady variations of the aerodynamic performance of a small wind turbine under static yawed and yawing process with sliding grid method,as well as the there-dimensional effect on the unsteady characteristics,using unsteady Reynolds-averaged Navier-Stokes(URANS)simulations.The simulation results are validated with experimental data and blade element momentum(BEM)results.The comparisons show that the CFD results have better agreement with the experimental data than both BEM results.The wind turbine power decreases according to a cosine law with the increase of yaw angle.The torque under yaw shows lower frequency fluctuations than the non-yawed condition due to velocity component of rotation and the influence of spinner.Dynamic yawing causes larger fluctuate than static yaw,and the reason is analyzed.The aerodynamic fluctuation becomes more prominent in the retreating side than that in the advancing side for dynamic yawing case.Variations of effective angle of attack and aerodynamic forces along the blade span are analyzed.The biggest loading position moves from middle span to outer span with the increase of yaw angle.Three-dimensional stall effect presents load fluctuations at the inner board of blade,and becomes stronger with the increase of yaw angle.

Flexible Operation Mode of Coal-fired Power Unit Coupling with Heat Storage of Extracted Reheat Steam

In order to provide more grid space for the renewable energy power,the traditional coal-fired power unit should be operated flexibility,especially achieved the deep peak shaving capacity.In this paper,a new scheme using the reheat steam extraction is proposed to further reduce the load far below 50%rated power.Two flexible operation modes of increasing power output mode and reducing fuel mode are proposed in heat discharging process.A 600 MW coal-fired power unit with 50%rated power is chosen as the research model.The results show that the power output is decreased from 300.03 MW to 210.07 MW when the extracted reheat steam flow rate is 270.70 t·h^(-1),which increases the deep peak shaving capacity by 15%rated power.The deep peak shaving time and the thermal efficiency are 7.63 h·d^(-1)and 36.91%respectively for the increasing power output mode,and they are 7.24 h·d^(-1)and 36.58%respectively for the reducing fuel mode.The increasing power output mode has the advantages of higher deep peak shaving time and the thermal efficiency,which is recommended as the preferred scheme for the flexible operation of the coal-fired power unit.

Elemental mercury (Hg^(0)) removal from coal syngas using magnetic tea-biochar: Experimental and theoretical insights

Mercury is ranked 3^(rd)as a global pollutant because of its long persistence in the environment. Approximately 65% of its anthropogenic emission (Hg^(0)) to the atmosphere is from coal-thermal power plants. Thus, the Hg^(0)emission control from coal-thermal power plants is inevitable. Therefore, multiple sorbent materials were synthesized using a one-step pyrolysis method to capture the Hg^(0)from simulated coal syngas. Results showed, the Hg^(0)removal performance of the sorbents increased by the citric acid/ultrasonic application.T5CUF_(0.3)demonstrated the highest Hg^(0)capturing performance with an adsorption capacity of 106.81 μg/g within 60 min at 200 °C under complex simulated syngas mixture (20% CO,20% H_(2), 10 ppm V HCl, 6% H_(2)O, and 400 ppm V H_(2)S). The Hg^(0)removal mechanism was proposed, revealing that the chemisorption governs the Hg^(0)removal process. Besides, the active Hg^(0)removal performance is attributed to the high dispersion of valence Fe_(3)O_(4)and lattice oxygen (α) contents over the T5CUF_(0.3)surface. In addition, the temperature programmed desorption (TPD) and XPS analysis confirmed that H_(2)S/HCl gases generate active sites over the sorbent surface, facilitating high Hg^(0)adsorption from syngas. This work represented a facile and practical pathway for utilizing cheap and eco-friendly tea waste to control the Hg^(0)emission.