Development of an oil spill forecast system for offshore China

An oil spill forecast system for of fshore China was developed based on Visual C++. The oil spill forecast system includes an ocean environmental forecast model and an oil spill model. The ocean environmental forecast model was designed to include timesaving methods, and comprised a parametrical wind wave forecast model and a sea surface current forecast model. The oil spill model was based on the "particle method" and fulfi lls the prediction of oil particle behavior by considering the drifting, evaporation and emulsifi cation processes. A specifi c database was embedded into the oil spill forecast system, which contained fundamental information, such as the properties of oil, reserve of emergency equipment and distribution of marine petroleum platform. The oil spill forecast system was successfully applied as part of an oil spill emergency exercise, and provides an operational service in the Research and Development Center for Off shore Oil Safety and Environmental Technology.

Development and Application of Oil-Spill Risk Assessment Model for Offshore Pipeline

To the potential oil-spill risk caused by offshore pipeline more attention has been paid after the Dalian oil spill incident from oil-pipeline explosion. Since then an issue about how to prevent and control the sudden oil-spill from the offshore pipeline has been raised. In this paper, we proposed an optimized model to analyze the main causes(probability) of spill and the consequence with the fuzzy comprehensive assessment model. Considering the complicated assessment process for oil-spill, the assessment factor system involving the spill probability and consequence was established based on the operative manual and statistic leakage/damage data of offshore pipeline in order to estimate the integrated spill risk score automatically. The evaluated factors of spill probability could be grouped into five aspects: corrosion, fatigue, national damage, third party, and operational fault; the consequence evaluated factors of spill included hazard of oil and impact-controlling capability. With some modifications based on experts' opinions, each of the evaluated factors in our work was developed with a relative weight and evaluation criterion. A test example for an offshore pipeline in the Bohai waters was described to show how the model can be used for an actual case in more detail. By using the oil-spill risk assessment model, it is easy to determine the risk level associated with the ongoing activity and management level and hence to take the risk mitigation action immediately.

Modeling underwater transport of oil spilled from deepwater area in the South China Sea

Based on a Lagrangian integral technique and Lagrangian particle-tracking technique,a numerical model was developed to simulate the underwater transport of oil from a deepwater spill. This model comprises two submodels: a plume dynamics model and an advection-diffusion model. The former is used to simulate the stages dominated by the initial jet momentum and plume buoyancy of the spilled oil,while the latter is used to simulate the stage dominated by the ambient current and turbulence. The model validity was verified through comparisons of the model predictions with experimental data from several laboratory flume experiments and a field experiment. To demonstrate the capability of the model further,it was applied to the simulation of a hypothetical oil spill occurring at the seabed of a deepwater oil/gas field in the South China Sea. The results of the simulation would be useful for contingency planning with regard to the emergency response to an underwater oil spill.

Effective Development of Enterprise Emergency Management under the New Policy of Safety Production

In recent years,China has formed a more perfect emergency management system,and has achieved more significant results.The form of safety production has maintained a continuous good development trend,showing the characteristics of"two declines,one being basically flat,and one zero occurrence".In order to further strengthen the implementation of production safety responsibilities and resolutely prevent and contain extremely major accidents,the recent national production safety teleconference deployed 15 measures to pay close attention to the implementation,seriously pursue accountability,adhere to the red line,and immediately carry out in-depth and solid production safety inspections across the country.In such a high pressure situation,the ways to effectively carry out the security management of enterprises were briefly described in this paper.

Investigation of the oil-seawater mixed flow under an electromagnetic field

The electromagnetic separation method is a new approach to treat ship-based marine oily wastewater,in which oil droplets are dispersed in seawater(oil-seawater mixed flow).In order to clarify the separation process and determine the separation characteristics,the flow field and volume fraction of the oil droplets of the oil-seawater mixed flow under an applied electromagnetic field with different operating conditions were investigated by 2D numerical simulations with the Eulerian model.The results show that:(1)the downward Lorentz force causes seawater to flow downwards and the oil droplets to move upwards due to the electromagnetic separation force in the effective section of the separation channel;(2)the volume fraction of the oil droplets at the top of the outlet section increases with the current density,magnetic field,and the diameter of the oil droplet and decreases with the inlet velocity of the oily seawater.The results provide useful guidance for the design of electromagnetic separation devices of the oil-seawater mixed flow.

Research on the risk-based model for regional emergency resource allocation for ship-source oil spill

The key point for rational allocation of emergency resources is to match the oil spill response capacity with the risk of oil spill. This paper proposes an innovative risk-based model for quantitative regional emergency resource allocation, which comprehensively analyzes the factors such as oil spill probability, hazard consequences, oil properties, weathering process and operation efficiency, etc. The model calculates three major resources, i.e., mechanical recovery, dispersion and absorption, according to the results of risk assessment. In a field application in Xiaohu Port, Guangzhou, China, and the model achieved scientific and rational allocation of emergency resources by matching the assessed risk with the regional capacity, and allocating emergency resources according to capability target. The model is considered to be beneficial to enhancing the resource efficiency and may contribute to the planning of capacity-building programs in high-risk areas.

Analysis of impacting factors on polarimetric SAR oil spill detection

Polarimetric synthetic aperture radar （SAR） oil spill detection parameters conformity coefficient （μ）, Muller matrix parameters （｜C｜,B0 ）, the eigenvalues of simplified coherency matrix （λnos） and the influence of SAR observing parameters, ocean environment and noise level are investigated. Radarsat-2 data are used to make systematic analysis of polarimetric parameters for different incidences, wind speeds, noise levels and the ocean phenomena （oil slick and look likes）. The influence of the SAR observing parameters, the ocean environment and the noise level on the typical polarimetric SAR parameter conformity coefficient has been analyzed. The results indicate that conformity coefficient cannot be simply used for oil spill detection, which represents the image signal to the noise level to some extent. When the signals are below the noise level for the oil slick and the look likes, the conformity coefficients are negative; while the signals above the noise level corresponds to positive conformity coefficients. For dark patches （low wind and biogenic slick） with the signal below the noise, polarization features such as conformity coefficient cannot separate them with oil slick. For the signal above the noise, the oil slick, the look likes （low wind and biogenic slick） and clean sea all have positive conformity coefficients, among which, the oil slick has the smallest conformity coefficient, the look likes the second, and the clean sea the largest value. For polarimetric SAR data oil spill detection, the noise plays a significant role. So the polafimetric SAR data oil spill detection should be carried out on the basis of noise consideration.

An experimental study on oil droplet size distribution in subsurface oil releases

Oil droplet size distribution （ODSD） plays a critical role in the rising velocity and transport of oil droplets in subsurface oil releases. In this paper, subsurface oil release experiments were conducted to study ODSD under different experimental conditions in a laboratory water tank observed by two high-speed cameras in March and April 2017. The correlation formulas Oh=lO.2Re-~ and Oh=39.2Re-1 （Re represents Reynolds number and Oh represents Ohnesorge number） were established to distinguish the boundaries of the three instability regimes in dimensionless space based on the experimental results. The oil droplet sizes from the experimental data showed an excellent match to the Rosin-Rammler distribution function with determination coefficients ranging from 0.86 to 1.00 for Lvda 10-1 oil. This paper also explored the influence factors on and change rules ofoil droplet size. The volume median diameter d50 decreased steadily with increasing jet velocity, and a sharp decrease occurred in the laminar-breakup regime. At Weber numbers （We） 〈100, the orifice diameter and oil viscosity appeared to have a large influence on the mean droplet diameter. At 100〈We〈1 000, the oil viscosity appeared to have a larger influence on the relative mean droplet diameter.

Characteristics of platinum-group elements in basalts from spreading axis of Mariana Trough

Total platinum-group elements （PGEs） abundances in basalts from the spreading axis of Mariana Trough ranged from 0.418 × 10^9 to 1. 022 × 10^-9, and primitive mantle-normalized PGE patterns are of positive slope showing the relative enrichment of PPGE （ platinum, palladium, rhodium） and gold relative to IPGE. Compared with other mantle-originated rocks, these basalts have lower PGE contents and wider ranges of primitive mantle-normalized ratios of palladium content to iridium one, palladium content to platinum one and palladium content to gold one exhibiting relative platinum and iridium depletion. Characteristics of PGE patterns indicated that the studied Mariana Trough basalts originated from low partial melting, and the MORB mantle beneath the spreading center had been contaminated by the are-island mantle. In the aspect of trace elements, Mariana Trough basalts showed the enrichment of LILE, lead and LREE, indicating that they had been influenced by subduetion compositions. All these demonstrated that Mariana Trough basalts are products of partial melting from a mixed mantle （ the contamination of MORB mantle by are-island mantle）.

Mineral Components, Texture, and Forming Conditions of Hydrothermal Chimney on the East Pacific Rise at 9°-10°N

To characterize the hydrothermal processes of East Pacific rise at 9°-10°N, sulfide mineral compositions, textural, and geochemical features of chimney ores were studied using ore microscope,scanning electron microscope, X-ray diffraction analysis, and electron microprobe techniques. Results show that there are three mineral assemblages for the hydrothermal chimney ores, namely：（i） anhydrite ＋ marcasite ＋ pyrite, （ii） pyrite ＋ sphalerite ＋ chalcopyrite, and （iii） chalcopyrite ＋ bornite ＋ digenite ＋ covellite. Mineral assemblages, zonational features, and geochemical characteristics of the ore minerals indicate that ore fluid temperature changed from low to high then to low with a maximum temperature up to 400 ℃. The chimney is a typical black smoker. The initial structure of the chimney was formed by the precipitation of anhydrites, and later the sulfides began to precipitate in the inner wall.

Simultaneous Desorption of Polycyclic Aromatic Hydrocarbons and Heavy Metals from Contaminated Soils by Rhamnolipid Biosurfactants

Hydrophobic organic compounds(HOCs)and heavy metals(HMs)are toxins that usually coexist in natural environments.Due to the differences in their properties,it remains challenging to simultaneously remove HMs and HOCs.In this study,the removal of phenanthrene(Phe)and lead(Pb)from co-contaminated soils by single rhamnolipid(RL)and mixed RL-sophorolipid(SL)biosurfactants were evaluated via soil column experiments.Biosurfactant micelle sizes were determined by dynamic light scattering,and the mechanisms of micelle solubilization were studied.The effects of biosurfactant concentrations,pH,washing agent salinity and the ageing time of polluted soils on Phe and Pb desorption efficiencies were also assessed.The substantial removal of Phe and Pb using mixed RL-SL systems,when molar fractions of RLs were 0.7,was attributed to large mixed micelle formation and lower sorption losses of these systems.The optimal pH value was 6.0,while Phe desorption was favoured at high RLs and low ionic strengths.However,the RLs concentration and ionic strength had no obvious influence on Pb removal.In addition,both Phe and Pb desorption decreased with increased ageing of the polluted soils.Combined RL-SL biosurfactants can be effective for simultaneously removing HOCs and HMs from polluted soils.

Research Status of Technical Specifications for Bioremediation of Shorelines Polluted by Spilling Oil

Bioremediation of shorelines polluted by spilling oil has no secondary pollution and saves manpower and material resources, so it has a wide market. Standardizing the operation methods and materials used of the technology can improve its efficiency. Therefore, the research process of technical specifications for bioremediation of shorelines polluted by spilling oil at home and abroad was expounded in this study.