Co-seismic Faults and Geological Hazards and Incidence of Active Fault of Wenchuan Ms 8.0 Earthquake,Sichuan,China

There are two co-seismic faults which developed when the Wenchuan earthquake happened. One occurred along the active fault zone in the central Longmen Mts. and the other in the front of Longmen Mts. The length of which is more than 270 kin and about 80 km respectively. The co-seismic fault shows a reverse flexure belt with strike of N45°-60°E in the ground, which caused uplift at its northwest side and subsidence at the southeast. The fault face dips to the northwest with a dip angle ranging from 50° to 60°. The vertical offset of the co-seismic fault ranges 2.5-3.0 m along the Yingxiu- Beichuan co-seismic fault, and 1.5-1.1 m along the Doujiangyan-Hanwang fault. Movement of the coseismic fault presents obvious segmented features along the active fault zone in central Longmen Mts. For instance, in the section from Yingxiu to Leigu town, thrust without evident slip occurred; while from Beichuan to Qingchuan, thrust and dextral strike-slip take place. Main movement along the front Longmen Mts. shows thrust without slip and segmented features. The area of earthquake intensity more than IX degree and the distribution of secondary geological hazards occurred along the hanging wall of co-seismic faults, and were consistent with the area of aftershock, and its width is less than 40km from co-seismic faults in the hanging wall. The secondary geological hazards, collapses, landslides, debris flows et al., concentrated in the hanging wall of co-seismic fault within 0-20 km from co-seismic fault.

Status in quo and future of geothermal energy in China

Energy saving and CO2 emissions reduction are critical tasks currently,and great effort has been made by Chinese government. Renewable energy consumption and CO2 emissions and reduction plan in China are introduced in this paper. Analysis is also made on present status and prospect of geothermal power generation and direct use in China respectively. Now,there is a new understanding of geothermal resources,and hot dry rock,considered as the future of geothermal resources,is likely used to generate electricity.

Luobusaite:A New Mineral

A group of mantle minerals including about 70-80 subtypes of minerals are discovered from a podiform chromitite in Tibet, China. Recovered minerals include diamond, coesite, moissanite, wustite, Fe-silides and a new mineral, luobusaite. All of these minerals were hand-picked from heavymineral separates of the podiform chromitite in the mantle peridotite of an ophiolite. The grains of luobusaite are as host mineral with inclusions of native silicon or as an intergrowth with native silicon and Fe-Si phase. Luobusaite occurs as irregular grains, with 0.1-0.2 mm in size, consisting of very finegrained aggregates. The mineral is steel-grey in color, metallic luster, and opaque. The empirical formula （based on 2 for Si） is Fe0.83Si2, according to the chemical compositions of luobusaite. X-ray powder-diffraction data： orthorhombic system, space group Cmca, a = 9.874 （14） A, b = 7.784 （5） A, c= 7.829（7） A, Z=16.

Predicting the distribution of thin bed reservoirs by broad frequency band seismic

Recognition of thin interbedded reservoirs in the middle-shallow strata in the Songliao Basin is a great difficulty. In order to resolve this problem, we present a technique for predicting the distribution of thin reservoirs using a broad frequency band and ultra high resolution seismic. Based on forward modeling, we recognized that a thin bed seismic reflection is characterized by changing amplitude with changing frequency （amplitude versus frequency, AVF）. We calculate the thickness of thin reservoirs from their AVF characteristics and predict the distribution of thin bed reservoir using broad frequency band and ultra high resolution seismic. The technique has been applied in the 3D seismic area of Zhaoyuan in the northern part of the Songliao Basin. The seismic resolution is increased by two or three times over that of conventional seismic and many thin reservoirs have been identified. The technique has extensive application to the exploration and development of oil and gas, such as optimizing the location of exploration wells, the design of wells （especially horizontal wells）, choice of production test layers, analyzing reservoir continuity in development wells, and so on.

Burial Records of Reactive Iron in Cretaceous Black Shales and Oceanic Red Beds from Southern Tibet

One of the new directions in the field of Cretaceous research is to elucidate the mechanism of the sedimentary transition from the Cretaceous black shales to oceanic red beds. A chemical sequential extraction method was applied to these two types of rocks from southern Tibet to investigate the burial records of reactive iron. Results indicate that carbonate-associated iron and pyrite are relatively enriched in the black shales, but depleted or absent in red beds. The main feature of the reactive iron in the red beds is relative enrichment of iron oxides （largely hematite）, which occurred during syn-depostion or early diagenesis. The ratio between iron oxides and the total iron indicates an oxygen-enriched environment for red bed deposition. A comparison between the reactive iron burial records and proxies of paleo-productivity suggests that paleo-productivity decreases when the ratio between iron oxides and the total iron increases in the red beds. This phenomenon could imply that the relationship between marine redox and productivity might be one of the reasons for the sedimentary transition from Cretaceous black shale to oceanic red bed deposition.

Numerical simulation of the dual laterolog for carbonate cave reservoirs and response characteristics

Cave carbonate formations are characterized by heterogeneity, which makes electrical log prediction difficult. It is currently important to know how to use the dual laterolog to accurately identify and quantitatively evaluate caves. Using numerical simulation to calculate electrical log responses can provide a theoretical basis for cave identification and evaluation. In this paper, based on the dual laterolog principles, we first study different size spherical cave models using the finite element method （FEM）, determine a relation between resistivity and cave filling after comprehensively studying the log responses of cave models with different filling material, and finally study the dual laterolog responses on caves filled with shale, limestone, conglomerate, and thin laminated formation of sand and shale. The numerical results provide a theoretical basis for identification and evaluation of carbonate cave reservoirs.

Phase estimation in bispectral domain based on conformal mapping and applications in seismic wavelet estimation

Seismic wavelet estimation is an important part of seismic data processing and interpretation, whose preciseness is directly related to the results of deconvolution and inversion. Wavelet estimation based on higher-order spectra is an important new method. However, the higher-order spectra often have phase wrapping problems, which lead to wavelet phase spectrum deviations and thereby affect mixed-phase wavelet estimation. To solve this problem, we propose a new phase spectral method based on conformal mapping in the bispectral domain. The method avoids the phase wrapping problems by narrowing the scope of the Fourier phase spectrum to eliminate the bispectral phase wrapping influence in the original phase spectral estimation. The method constitutes least-squares wavelet phase spectrum estimation based on conformal mapping which is applied to mixed-phase wavelet estimation with the least-squares wavelet amplitude spectrum estimation. Theoretical model and actual seismic data verify the validity of this method. We also extend the idea of conformal mapping in the bispectral wavelet phase spectrum estimation to trispectral wavelet phase spectrum estimation.

Forward modeling and inversion of tensor CSAMT in 3D anisotropic media

Tensor controlled-source audio-frequency magnetotellurics （CSAMT） can yield information about electric and magnetic fields owing to its multi-transmitter configuration compared with the common scalar CSAMT. The most current theories, numerical simulations, and inversion of tensor CSAMT are based on far-field measurements and the assumption that underground media have isotropic resistivity. We adopt a three-dimensional （3D） staggered-grid finite difference numerical simulation method to analyze the resistivity in axial anisotropic and isotropic media. We further adopt the limited-memory Broyden- Fletcher-Goldfarb-Shanno （LBFGS） method to perform 3D tensor CSAMT axial anisotropic inversion. The inversion results suggest that when the underground structure is anisotropic, the isotropic inversion will introduce errors to the interpretation.

2D joint inversion of CSAMT and magnetic data based on cross-gradient theory

A two-dimensional forward and backward algorithm for the controlled-source audio-frequency magnetotelluric （CSAMT） method is developed to invert data in the entire region （near, transition, and far） and deal with the effects of artificial sources. First, a regularization factor is introduced in the 2D magnetic inversion, and the magnetic susceptibility is updated in logarithmic form so that the inversion magnetic susceptibility is always positive. Second, the joint inversion of the CSAMT and magnetic methods is completed with the introduction of the cross gradient. By searching for the weight of the cross-gradient term in the objective function, the mutual influence between two different physical properties at different locations are avoided. Model tests show that the joint inversion based on cross-gradient theory offers better results than the single-method inversion. The 2D forward and inverse algorithm for CSAMT with source can effectively deal with artificial sources and ensures the reliability of the final joint inversion algorithm.

Depressing effect of sodium hexametaphosphate on apatite in flotation of rutile

The separation of rutile from apatite by flotation and the mechanism of depressing the apatite of sodium hexametaphosphate were studied. The results showed that rutile and apatite could be separated by using alkyl-imino-bismethylene phosphoric acid and sodium hexametaphosphate as a collector and a regulator, respectively. Sodium hexametaphosphate could selectively dissolve calcium ions on the apatite surface, and make calcium ions break away from lattice binding through combining.

Electrochemical oxidation of ammonia-containing wastewater using Ti/RuO_2-Pt electrode

The electrochemical oxidation degradation processes for artificial and actual wastewater containing ammonia were carried out with a Ti/RuO2-Pt anode and a Ti plate cathode. We studied the effects of different current densities, space sizes between the two electrodes, and amounts of added NaCl on ammonia-containing wastewater treatm.ent. It was shown that, after a 30-min treatment under the optimal conditions, which were a current density of 20 mA/cm2, a space size between the two electrodes of I cm, and an added amount of 0.5 g/L of NaC1, the COD concentration in municipal wastewater was 40 mg/L, a removal rate of 90%; and the NH3-N concentration was 7 mg/L, a removal rate of 88.3%. The effluent of municipal wastewater qualified for Class A of the Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant （GB 18918-2002）.

An Early Aged Ophiolite in the Western Kunlun Mts., NW Tibetan Plateau and Its Tectonic Implications

The early aged ophiolites have attracted attention of many geologists in recent decades, because the early aged ophiolites can provide the information about the ancient oceanic processes relevant to the evolution of plate tectonics in the early period of the earth, and also concern such problems as whether there existed a ＂Proto-Tethys＂ and the break-up and convergence of the Rodinian Supercontinent. This paper reveals a definite complete ophiolite of Neoproterozoic-Early Paleozoic, named Kuda ophiolite in the western Kunlun Mrs., NW Tibetan Plateau, and reports the recent reasonable SHRIMP zircon U-Pb ages of 510±4 Ma, and 502±13 Ma for the cumulates of the Kuda ophiolite, using the most powerful dating tool, the SHRIMP-Ⅱ. The geochemical and geochronology data integrating with the geological setting suggest that the Kuda ophiolite might have formed in an archipelago oceanic basin, not in a vast ocean, the so-called ＂Proto-Tethys＂, and was tectonically emplaced during the Early Paleozoic.

A migration imaging method using CGP stacked cylindrical waves

In view of the seismic exploration problem of thin sand reservoirs in the Songliao Basin, this paper puts forward a migration imaging method using CGP （common geophone point） stacked cylindrical waves. By this means, seismic data should be acquired from a midpoint shooting layout system with small shot-point spacing and small geophone interval. Using such seismic data, CGP gathers are first stacked to compose a cylindrical wave section. The cylindrical wave section is migrated and imaged by means of the ray path downward continuation of the down-going wave and the wave equation downward continuation of the upgoing wave. The results from the modeling analysis and the data processing of the TK8157 seismic line in the Songliao Basin shows that the proposed migration imaging method has higher seismic resolution and fidelity. Furthermore, the proposed method is proven to be more effective for discovering small sand bodies, small faults, stratigraphic pinch-outs, and so on.

Impact Factors on Removal of Perchloroethylene with Nano-Ni/Fe Methodology

Chlorinated hydrocarbons are widely detected in groundwater, but conventional removal methodologies are not time-and-cost effective. With the development of iron reducing technology in recent years, research on nano-iron and nano-bimetal has become a hot spot. The paper presents the results of impact factors on perchloroethylene （PCE） removal by nano-Ni/Fe method. The data show that the reaction rate of unexposed nano-Ni/Fe is 4 times higher than exposed one; and temperature is one of the important controlling factors. Reaction rate constant KSA increases by 2-3 times with every 10℃ increment of temperature. Within a specific range, higher Ni/Fe ratio favors dechlorination process. When the Ni/Fe is 8%, the dechlorination process reaches the highest rate. Dissoved oxygen in the solution does not favor the degradation of chlorinated hydrocarbons.

Degradation of Tetrachloroethene by Several Co-metabolism Substrates in Groundwater

Tetrachloroethene （PCE） is biodegraded by reductive dechlorination with co-metabolism substrates under anaerobic conditions. By inoculating sludge from an anaerobic pool, a biodegradation test of PCE is conducted in the anaerobic condition. In the test, several substrates including methanol, ethanol, formate, acetate, lactate and glucose, are conducive to the conversion from PCE to TCE and 1,1-DCE. The results show the microbe can be cultivated well under the anaerobic circumstances of mixture of sewage （sludge） and soil with the index of COD after eleven days. Degradation of PCE accords with one order reaction kinetics equation. The sequence of the reaction rate constant is Kacetate 〉Kglucose 〉 Klactate 〉 Kethanol 〉 Kformate 〉 Kmethanol, and acetate is an outstanding co-metabolism substratum whose reaction rate constant is 0.6632d^-1.

Energy savings and CO_2 emission reduction by using geothermal heat pumps

The renewable energy will play significant role in the world primary energy consumption in the future. Geothermal energy is immense with 5 000 EJ/a of technical potential, and geothermal heat pumps (GHPs) are one of the fastest growing applications of renewable energy in the world with annual increases of 10 % and much faster in China. With high coefficient of performance (COP) up to 6, GHPs make efficiency of primary energy more than 240 % with assumed a 40 % of electricity generation efficiency, which means energy savings and CO2 emission reduction. In this paper,the geothermal resources and its utilization are talked about, and GHPs technology was introduced. Due to its high efficiency, there will be energy savings by using GHPs. There is also CO2 emission reduction because of using geothermal heat pumps, which is analyzed in the end.

Application of Electrical Potential Testing Technique in Fracture Detection

Fracturing is an important method to transform lowpermeability oil reservoirs, and it has been widely used in low-permeability oil reservoirs exploitation. Through the fracturing, artificial fractures are formed underground, so as to improve the condition of stratigraphic seepage flow, dredge the stop, and improve oil well productivity. The length and flow conductivity of fracture does not only determine the capability of increasing production and water injection, but also influence the recovery and ultimate recovery of oil reservoir of anhydrous period,

Multi-scale pressure-balanced structures in the solar wind observed by WIND

This work detects multi-scale, from hour to seconds, pressure-balanced structures (PBSs) in the solar wind based on the anti- correlation between the plasma thermal pressure and the magnetic pressure measured by WIND at 1 AU on April 5th, 2001. In our former research based on Cluster measurements, we showed the anti-correlation between the electron density and the magnetic field strength in multi-scales, and we supposed these structures may be pressure-balanced structures. Thus, in this work we aim to prove our speculation by the direct evidence on pressure measurements. Different from our previous work, we apply the WIND measurements this time, for they have both the magnetic pressure and the plasma pressure which Cluster could not offer. We use the wavelet cross-coherence method to analyze the correlation between the plasma pressure (P th ) and the magnetic pressure (P B ), and also the electron density (N e ) and the magnetic field strength (B) on various scales. We observe the anti-correlation between P th and P B distributed at different temporal scales ranging from 1000 s down to 10 s. This result directly indicates the existence of pressure- balanced structures (PBSs) with different sizes in the solar wind. Further, We compare the wavelet cross correlation spectrum of P th -P B and N e -B. We notice that the two spectra are similar in general. Thus this result confirms that the relation between P th -P B and N e -B are consistent with each other in the PBSs we study. Moreover, we compare the power spectrum density (PSD) of relative N e fluctuation with our previous work based on Cluster measurements. The two spectra show similar trend with Komolgorov's -5/3 as their slopes. This may imply the similarity of the structures observed by both WIND and Cluster spacecrafts. Finally, we discuss the possible formation mechanisms for these multi-scale pressure-balanced structures. Our result is important to support the existence of multi-scale PBSs from one-hour scale down to one-minute, and is helpful to understand the role of compressive fluctuation in the solar wind turbulence dominated by Alfvénic cascading.