Exploration of New Engineering Upgrading Path from Perspective of Professional Certification--A Case Study of Telecommunication Major of Chongqing University of Arts and Sciences

From the perspective of professional accreditation,starting with the mode of education based on outcomes based education(OBE),this paper puts forward the idea of insisting on the principal role of university collaboration,and taking the road of building new specialties of electronic information science and technology through collaborative innovation such as school administration,school-enterprise,production and teaching.This paper combines"new subject construction-result orientation-professional certification"into a whole,and probes into the orientation of talent training objectives,the construction of curriculum system,the construction of teaching staff,and the cooperation of educational models.A basic path for upgrading of new electronic engineering majors is explored.

Analysis of＇Four In One＂ College Students Entrepreneurship Education Model Taking Chongqing University of Arts and Sciences as an example

the scientific entrepreneurship education model plays an important role in the orientation, implementation and evaluation of entrepreneurship education. This paper mainly introduces the construction of Chongqing University of Arts and Sciences＇ the ＂four in one＂ mode of entrepreneurship educationof ＂curriculum, training, practice, service＂ , and specificallydiscussed the model of the practical operation and support conditions for detailed discussion.

Source apportionment of heavy metals in soils around a coal gangue heap with the APCS-MLR and PMF receptor models in Chongqing,southwest China

This study studied the characteristics and source apportionment of heavy metal pollution in the agricultural soil surrounding a gangue coal heap in Chongqing,China by using absolute principal component scores-multiple linear regression(APCSMLR)model and positive matrix factorization(PMF)model.The applicability of the models was compared in the assessment of source apportionment.The results showed that the average contents of Cd,Hg,As,Pb,Cr,Cu,Ni,and Zn in the surface soil were 0.46,0.14,9.66,31.2,127,95.6,76.0,and 158 mg/kg,respectively.Combined with the spatial distribution and correlation analyses,the results of source apportionment were consistent for both the APCSMLR and PMF models.Cd,Hg,As,and Pb were mainly affected by the gangue heap accumulation,with respective contributions of 74.6%,79.4%,69.1%,and 67.2%based on the APCS-MLR model and respective contributions of 69.7%,60.7%,57.4%,and 41.9%based on the PMF model.Ni and Zn were mainly affected by industrial and agricultural activities,while Cr and Cu were mainly affected by natural factors.The results of the source apportionment were approximately consistent between the APCS-MLR and PMF models.The combined application of the two receptor models can make the results of source apportionment more comprehensive,accurate,and reliable.

Estimation of cancer cell migration in biomimetic random/oriented collagen fiber microenvironments

Increasing data indicate that cancer cell migration is regulated by extracellular matrixes and their surrounding biochemical microenvironment,playing a crucial role in pathological processes such as tumor invasion and metastasis.However,conventional two-dimensional cell culture and animal models have limitations in studying the influence of tumor microenvironment on cancer cell migration.Fortunately,the further development of microfluidic technology has provided solutions for the study of such questions.We utilize microfluidic chip to build a random collagen fiber microenvironment(RFM)model and an oriented collagen fiber microenvironment(OFM)model that resemble early stage and late stage breast cancer microenvironments,respectively.By combining cell culture,biochemical concentration gradient construction,and microscopic imaging techniques,we investigate the impact of different collagen fiber biochemical microenvironments on the migration of breast cancer MDA-MB-231-RFP cells.The results show that MDA-MB-231-RFP cells migrate further in the OFM model compared to the RFM model,with significant differences observed.Furthermore,we establish concentration gradients of the anticancer drug paclitaxel in both the RFM and OFM models and find that paclitaxel significantly inhibits the migration of MDA-MB-231-RFP cells in the RFM model,with stronger inhibition on the high concentration side compared to the low concentration side.However,the inhibitory effect of paclitaxel on the migration of MDA-MB-231-RFP cells in the OFM model is weak.These findings suggest that the oriented collagen fiber microenvironment resembling the late-stage tumor microenvironment is more favorable for cancer cell migration and that the effectiveness of anticancer drugs is diminished.The RFM and OFM models constructed in this study not only provide a platform for studying the mechanism of cancer development,but also serve as a tool for the initial measurement of drug screening.

On implications of somatostatin in diabetic retinopathy

Somatostatin,a naturally produced neuroprotective peptide,depresses excitatory neurotransmission and exerts anti-proliferative and anti-inflammatory effects on the retina.In this review,we summarize the progress of somatostatin treatment of diabetic retinopathy through analysis of relevant studies published from February 2019 to February 2023 extracted from the PubMed and Google Scholar databases.Insufficient neuroprotection,which occurs as a consequence of declined expression or dysregulation of retinal somatostatin in the very early stages of diabetic retinopathy,triggers retinal neurovascular unit impairment and microvascular damage.Somatostatin replacement is a promising treatment for retinal neurodegeneration in diabetic retinopathy.Numerous pre-clinical and clinical trials of somatostatin analog treatment for early diabetic retinopathy have been initiated.In one such trial(EUROCONDOR),topical administration of somatostatin was found to exert neuroprotective effects in patients with pre-existing retinal neurodysfunction,but had no impact on the onset of diabetic retinopathy.Overall,we concluded that somatostatin restoration may be especially beneficial for the growing population of patients with early-stage retinopathy.In order to achieve early prevention of diabetic retinopathy initiation,and thereby salvage visual function before the appearance of moderate non-proliferative diabetic retinopathy,several issues need to be addressed.These include the needs to:a)update and standardize the retinal screening scheme to incorporate the detection of early neurodegeneration,b)identify patient subgroups who would benefit from somatostatin analog supplementation,c)elucidate the interactions of somatostatin,particularly exogenously-delivered somatostatin analogs,with other retinal peptides in the context of hyperglycemia,and d)design safe,feasible,low cost,and effective administration routes.

Alcohol solvent effect on the self-assembly behaviors of lignin oligomers

The interactions between lignin oligomers and solvents determine the behaviors of lignin oligomers self-assembling into uniform lignin nanoparticles(LNPs).Herein,several alcohol solvents,which readily interact with the lignin oligomers,were adopted to study their effects during solvent shifting process for LNPs’production.The lignin oligomers with widely distributed molecular weight and abundant guaiacyl units were extracted from wood waste(mainly consists of pine wood),exerting outstanding self-assembly capability.Uniform and spherical LNPs were generated in H_(2)O-n-propanol cosolvent,whereas irregular LNPs were obtained in H_(2)O-methanol cosolvent.The unsatisfactory self-assembly performance of the lignin oligomers in H_(2)O-methanol cosolvent could be attributed to two aspects.On one hand,for the initial dissolution state,the distinguishing Hansen solubility parameter and polarity between methanol solvent and lignin oligomers resulted in the poor dispersion of the lignin oligomers.On the other hand,strong hydrogen bonds between methanol solvent and lignin oligomers during solvent shifting process,hindered the interactions among the lignin oligomers for self-assembly.

Interfacial reaction between AZ91D magnesium alloy melt and mild steel under high temperature

The metallurgical quality control of magnesium(Mg)and Mg alloys in melting process is required to ensure a satisfied mechanical and corrosion performance,while the typical used steel crucible introduces impurities and interfacial interaction during melting process.Therefore,a systematic study about impurities diffusion and interfacial interaction between molten Mg and steel is necessary.In the present study,the interfacial reaction between molten AZ91D Mg alloy and mild steel during melting process was investigated with the melting temperatures of 700℃,750℃ and 800℃.The results show that Al(Fe,Mn)intermetallic layer is the intermetallic primarily formed at the interfaces of AZ91D melt and mild steel.Meanwhile,Al_(8)(Mn,Fe)5is indexed between Al(Fe,Mn)and AZ91D.AlFe_(3)C appears between the mild steel and Al(Fe,Mn)at 700℃ and 750℃,but absent at 800℃ due to the increased solubility of carbon in Mg matrix.It is found that the growth of the intermetallic layer is controlled by diffusion mechanism,and Al and Mn are the dominant diffusing species in the whole interfacial reaction process.By measuring the thickness of different layers,the growth constant was calculated.It increases from 1.89(±0.03)×10^(-12)m^(2)·s^(-1)at 700℃ to 3.05(±0.05)×10^(-12)m^(2)·s^(-1)at 750℃,and 5.18(±0.05)×10^(-12)m^(2)·s^(-1)at 800℃.Meanwhile,the content of Fe is linearly increased in AZ91D with the increase of holding time at 700℃ and 750℃,while it shows a significantly increment after holding for 8 h at 800℃,indicating holding temperature is more crucial to determine the Fe content of AZ91D than holding time.

Chromosome-level assembly of triploid genome of Sichuan pepper(Zanthoxylum armatum)

As an important spice species in Rutaceae, the Sichuan pepper (Zanthoxylum armatum) can provide pungent and numbing taste, as well as aroma in its mature fruit. Here we assembled a chromosome-level genome of green prickly ash which was widely cultivated in a major production area including Chongqing and Sichuan province, China. We generated 712 Gb (~112×) PacBio long reads and 511 Gb (~82×) Hi-C data, and yielded an assembly of 99 pseudochromosomes with total size of 5.32 Gb and contig N50 of 796 kb. The genomic analyses and cytogenetic experiments both indicated that the cultivarZhuye Huajiao’ was a triploid. We identified a Zanthoxylum-specific whole genome duplication event emerging about 24.8 million years ago (Mya). We also detected a transposition burst event (0.3-0.4 Mya) responsible for the large genome size of Z. armatum. Metabolomic analysis of the Zanthoxylum fruits during development stages revealed profiles of39 volatile aroma compounds and 528 secondary metabolites, from which six types of sanshools were identified. Based on metabolomic and transcriptomic network analysis, we screened candidate genes encoding long chain acyl-CoA synthetase, fatty acid desaturase,branched-chain amino acid aminotransferase involved in sanshool biosynthesis and three genes encoding terpene synthase during fruit development. The multi-omics data provide insights into the evolution of Zanthoxylum and molecular basis of numbing and aroma flavor of Sichuan pepper.

Research on the Education Strategy of College Students’Career Planning in the New Era

Career planning is the key educational content for college students,which is related to students’career choices and future development after graduation.However,there are some common problems related to career planning among college students.At the same time,career planning education itself fails to break through the limitations of traditional education,which,to some extent,hinders the future development planning of college students.Based on this,schools should actively introduce advanced education methods in the new era,combine the characteristics of college students on the basis of summarizing the previous planning experience in education,constantly improve and innovate the content and form of career planning education,promote the improvement of college students’education,and enhance the quality of education.

Effect of low-nitrogen stress on photosynthesis and chlorophyll fluorescence characteristics of maize cultivars with different low-nitrogen tolerances

Nitrogen(N)is a critical element for plant growth and productivity that influences photosynthesis and chlorophyll fluorescence.We investigated the effect of low-N stress on leaf photosynthesis and chlorophyll fluorescence characteristics of maize cultivars with difference in tolerance to low N levels.The low-N tolerant cultivar ZH311 and low-N sensitive cultivar XY508 were used as the test materials.A field experiment(with three N levels:N0,0 kg ha–1;N1,150 kg ha–1;N2,300 kg ha–1)in Jiyanyang,Sichuan Province,China,and a hydroponic experiment(with two N levels:CK,4 mmol L–1;LN,0.04 mmol L–1)in Chengdu,Sichuan Province,China were conducted.Low-N stress significantly decreased chlorophyll content and rapid light response curves of the maximum fluorescence under light(Fm′),fluorescence instable state(Fs),non-photochemical quenching(qN),the maximum efficiency of PSII photochemistry under dark-adaption(Fv/Fm),potential activity of PSII(Fv/Fo),and actual photochemical efficiency of PSII(ΦPSII)of leaves.Further,it increased the chlorophyll(Chl)a/Chl b values and so on.The light compensation point of ZH311 decreased,while that of XY508 increased.The degree of variation of these indices in low-N tolerant cultivars was lower than that in low-N sensitive cultivars,especially at the seedling stage.Maize could increase Chl a/Chl b,apparent quantum yield and light saturation point to adapt to N stress.Compared to low-N sensitive cultivars,low-N tolerant cultivars maintained a higher net photosynthetic rate and electron transport rate to maintain stronger PSII activity,which further promoted the ability to harvest and transfer light.This might be a photosynthetic mechanism by which low-N tolerant cultivar adapt to low-N stress.

Influence of preparation methods on the physicochemical properties and catalytic performance of MnO_x-CeO_2 catalysts for NH_3-SCR at low temperature

This work examines the influence of preparation methods on the physicochemical properties and catalytic performance of MnOx‐CeO2 catalysts for selective catalytic reduction of NO by NH3 (NH3‐SCR) at low temperature. Five different methods, namely, mechanical mixing, impregnation,hydrothermal treatment, co‐precipitation, and a sol‐gel technique, were used to synthesizeMnOx‐CeO2 catalysts. The catalysts were characterized in detail, and an NH3‐SCR model reaction waschosen to evaluate the catalytic performance. The results showed that the preparation methodsaffected the catalytic performance in the order: hydrothermal treatment > sol‐gel > co‐precipitation> impregnation > mechanical mixing. This order correlated with the surface Ce3+ and Mn4+ content,oxygen vacancies and surface adsorbed oxygen species concentration, and the amount of acidic sitesand acidic strength. This trend is related to redox interactions between MnOx and CeO2. The catalystformed by a hydrothermal treatment exhibited excellent physicochemical properties, optimal catalyticperformance, and good H2O resistance in NH3‐SCR reaction. This was attributed to incorporationof Mnn+ into the CeO2 lattice to form a uniform ceria‐based solid solution (containing Mn‐O‐Cestructures). Strengthening of the electronic interactions between MnOx and CeO2, driven by thehigh‐temperature and high‐pressure conditions during the hydrothermal treatment also improved the catalyst characteristics. Thus, the hydrothermal treatment method is an efficient and environment‐friendly route to synthesizing low‐temperature denitrification (deNOx) catalysts.

Investigation of Al2O3 and Fe2O3 transmission and transformation during the decomposition of phosphogypsum

Phosphogypsum(PG) is a solid waste produced in the phosphate fertilizer industry and is environmentally harmful.The decomposition of PG to recycle calcium and sulfur is a proper way to reutilize PG. Current work aims at enriching the basic theory of coal decomposition process of PG. The emphasis was laid on the exploration of impact of main impurities on the process. On the other hand, according to Reaction Module, Equilib Module, and Phase Diagram Module of FactS age, the simulation computation was done on the systems of pure gypsum mixed with coal,with or without impurities for avoiding other impurities interference. Later, possible reactions in the process were deduced. Additionally, experiments were conducted in a TG-DTA integrated thermal gravimetric analyzer and a tube furnace. The products from the experiments were characterized and analyzed to verify the accuracy of theoretical calculations. The results showed that these impurities can change the decomposition process of PG. For example, aluminum oxide was transformed to calcium sulfoaluminate, while iron oxide was transformed to dicalcium ferrite. Furthermore, the results help to further improve the basic theory of phosphogypsum decomposition.

Temperature-Dependent Debye Temperature and Specific Capacity of Graphene

The shot-range interaction and the atomic anharmonic vibration are both considered, and then the analytic functions of the Debye temperature, the specific capacity and the thermal conductivity of graphene with the temperature are obtained. The influence of anharmonic vibration on these thermal physical properties is also investigated. Some theoretical results are given. If only the harmonic approximation is considered, the Debye temperature of the graphene is unrelated to the temperature. If the anharmonic terms are considered, it increases slowly with the increasing temperature. The molar heat capacity of the graphene increases nonlinearly with the increasing temperature. The mean free path of phonons and the thermal conductivity of the graphene decrease nonlinearly with the increasing temperature. The relative changes of the Debye temperature, the specific heat capacity and the thermal conductivity caused by the anharmonic terms increase with the increasing temperature. The anharmonic effect of atomic vibration becomes more significant under higher temperature.

Grain-filling characteristics and yield differences of maize cultivars with contrasting nitrogen efficiencies

To investigate the effect of nitrogen management on the grain-filling characteristics and yield formation of maize cultivars with contrasting nitrogen efficiencies,and to identify differences in grain-filling characteristics and yield of maize cultivars in response to nitrogen management,a two-year field experiment was conducted in southwest China in2015–2016.The grain-filling rate and duration of the N-inefficient cultivar XY 508 were higher than those of the N-efficient cultivar ZH 311.The 100-kernel weight of XY 508 was significantly higher than that of ZH 311.The kernel number per ear of ZH 311 was significantly higher than that of XY 508,making the population filling rate of ZH 311 significantly higher than that of XY 508.The higher population filling rate of the N-efficient maize cultivar led to a significant yield advantage over the N-inefficient maize cultivar.Nitrogen management effectively improved maize grain yield,but the response of maize cultivars with contrasting nitrogen efficiencies to nitrogen management was inconsistent.A basal fertilizer ratio 60.43%with a topdressing ratio 39.57%effectively increased grainfilling rate,delayed the time to maximum filling rate,prolonged the active filling period and effective grain-filling time,increased the 100-kernel weight,and maintained higher kernels per ear,thereby improving the population filling rate and maximizing the yield advantage of the N-efficient cultivar.A 100%basal fertilizer ratio not only increased the number of kernels per ear,but also maintained high grain filling characteristics to obtain a higher 100-kernel weight and increased the population filling rate,leading to a high grain yield in the N-inefficient cultivar.Thus,the 100%basal fertilizer ratio partially compensated for the deficient grain yield of the N-inefficient cultivar.

Comparison of microstructures and mechanical properties of composite extruded AZ31 sheets

The microstructures and mechanical properties of the composite extruded AZ31/AZ31 and AZ31/4047 Al sheets were investigated and made a comparison to the conventional extruded AZ31 sheet.Owing to the introduced intense shear deformation at the interface during the composite extrusion,grain refinement and tilted texture were detected in AZ31 layers of the AZ31/AZ31 and AZ31/4047 Al sheets,while the conventional extruded AZ31 sheet exhibited a relative coarse,inhomogeneous microstructure and strong basal texture.The compressiontension yield ratio was increased gradually from the AZ31 to the AZ31/AZ31 and AZ31/4047 Al sheets.Besides,the AZ31/4047 Al sheet could successfully accomplish the whole bending forming process at room temperature,while the AZ31 and AZ31/AZ31 sheets were both bend-formed to failure with significant cracks in the outer tensile region under the identical bending parameters.Moreover,under the same bending strain,both the outward offset degree of strain neutral layer and the sheet thickening were more serious in the AZ31/4047 Al composite sheet than those of the AZ31 and AZ31/AZ31 sheets.The foremost reason was the quite wide gap of material properties between Mg alloy AZ31 layer(tensile loading in the outer region)and Al 4047 layer(compressive loading in the inner region).

Chromosomal Localization of the 5S and 45S rDNA Sites and 5S rDNA Sequence Analysis in Nelumbo Species

The physical location of 45S and 5S rDNA sites by double-target fluorescence in situ hybridization （FISH） and 5S rDNA non-transcribed spacer （NTS） sequences was studied in five accessions of Nelumbo nucifera Gaertn.and one accession of N.nucifera subsp.lutea （Willd.）.The chromosome number of all tested materials was 2n=16.The loci of 5S rDNA were close to the centromere regions of chromosome 3,and the loci of 45S rDNA were found on chromosomes 7 and 8 in all the six tested accessions,respectively.Similarly,45S rDNAs were also located on chromosome 4 in four tested accessions.The 5S rRNA gene sequences were conserved and the NTS sequences were variable among the samples.N.nucifera subsp.lutea was the longest branch in the phylogenetic tree and clustered with N.nucifera cv.Liangzihu.N.nucifera cv.Heilongjiang and N.nucifera cv.Weishanhu showed a close relationship with each other.N.nucifera cv.Dahe Lian was closer to N.nucifera cv.Nihelu Lian than to other tested accessions.Analysis of the molecular karyotype and the 5S rRNA gene spacer sequence suggested the genetic diversity was limited within Nelumbo species and it seems suitable that American lotus was considered as the subspecies of N.nucifera.

Haplotype-resolved genome of diploid ginger (Zingiber officinale) and its unique gingerol biosynthetic pathway

Ginger(Zingiber officinale),the type species of Zingiberaceae,is one of the most widespread medicinal plants and spices.Here,we report a high-quality,chromosome-scale reference genome of ginger‘Zhugen’,a traditionally cultivated ginger in Southwest China used as a fresh vegetable,assembled from PacBio long reads,Illumina short reads,and high-throughput chromosome conformation capture(Hi-C)reads.The ginger genome was phased into two haplotypes,haplotype 1(1.53 Gb with a contig N50 of 4.68 M)and haplotype 0(1.51 Gb with a contig N50 of 5.28 M).Homologous ginger chromosomes maintained excellent gene pair collinearity.In 17,226 pairs of allelic genes,11.9%exhibited differential expression between alleles.Based on the results of ginger genome sequencing,transcriptome analysis,and metabolomic analysis,we proposed a backbone biosynthetic pathway of gingerol analogs,which consists of 12 enzymatic gene families,PAL,C4H,4CL,CST,C3’H,C3OMT,CCOMT,CSE,PKS,AOR,DHN,and DHT.These analyses also identified the likely transcription factor networks that regulate the synthesis of gingerol analogs.Overall,this study serves as an excellent resource for further research on ginger biology and breeding,lays a foundation for a better understanding of ginger evolution,and presents an intact biosynthetic pathway for species-specific gingerol biosynthesis.

Effect of heat input on microstructure and mechanical properties of butt-welded dissimilar magnesium alloys joint

The effects of heat input on the microstructures and mechanical properties of tungsten inert gas （TIG） butt-welded AZ31/MB3 dissimilar Mg alloys joint were investigated by microstructural observations, microhardness testing and tensile testing. The results reveal that with the increase of heat input, the width of welding seam increases obviously and the grains both in the fusion zone and the heat affected zone coarsen during TIG welding process. The tensile strength of butt-welded joint increases with the increase of heat input and the maximum joining strength of 242 MPa is obtained with wedding current of 90 A. However, lots of welding pores occur with the further increase of heat input, which results in the decrease of joining strength. It is experimentally demonstrated that robust joint can be obtained by TIG welding process.

Integration of Ru/C and base for reductive catalytic fractionation of triploid poplar

Lignin,which is the most recalcitrant component of lignocellulosic biomass,is also the most abundant renewable aromatic resource.Herein,reductive treatment of triploid poplar sawdust by the integration of catalytic Ru/C and a base,which afforded high yields of phenolic monomers from the lignin component and a solid carbohydrate pulp,is reported.The introduction of Cs_(2)CO_(3) led to the generation of C2 side‐chained phenols through the cleavage of C_(β)–O and C_(β)–C_(γ) bonds inβ–O–4 units in addition to C3 side‐chained phenols;the relationship between C2 and C3 was dependent on the base dosage.The reaction conditions,including base species,temperature,time,and H_(2) pressure,were optimized in terms of phenolic product distribution,delignification degree,and carbohydrate retention.The carbohydrate pulps generated from reductive catalytic fractionation in the presence of Cs_(2)CO_(3) were more amenable to enzymatic hydrolysis,indicating that this treatment of biomass constituted the fractionation of biomass components together with the breakdown of biomass recalcitrance.

Preparation of hexagonal and amorphous chromium oxyhydroxides by facile hydrolysis of K_xCrO_y

The hydrolysis process and mechanisms of unique as-prepared KCrO2 and K3 CrO4 were systematically investigated. The characterization results of XRD, IR and SEM show that the hydrolysis reaction can be realized at a low reaction temperature of 80 ℃ and a reaction time of 24 h. Moreover, the greyish-green α-CrOOH with a hexagonal plate-like morphology and a large size of 10 μm is formed via the hydrolysis of the single-phase hexagonal KCrO2, while the green sol-gel of amorphous Cr(OH)3 with a lumpy aggregate morphology is generated through the hydrolysis of a cubic K3 CrO4. It is a facile and rapid method to synthesize pure-phase chromium oxyhydroxide via the above hydrolysis.