The polystyrene supported glutamic acid Schiff base complex of Mn ( Ⅱ ) (PS-Sal-Glue-Mn) was prepared with chloromethylated styrene polymer beads, 2,4-dihydroxybenzaldehyde, L-glutamic acid and manganese ( Ⅱ )...The polystyrene supported glutamic acid Schiff base complex of Mn ( Ⅱ ) (PS-Sal-Glue-Mn) was prepared with chloromethylated styrene polymer beads, 2,4-dihydroxybenzaldehyde, L-glutamic acid and manganese ( Ⅱ ) acetate tetrahyrate. The polymeric ligand and the complex were characterized by FT-IR, small area X-ray photoelectron spectroscopy (XPS) and 1CP-AES. In the presence of the manganese complex, cyclohexene (1) was effectively oxidized by molecular oxygen without reductant. The major products of the reaction were 2-cyclohexen-l-ol (2), 2-cyclohexen-l-one (3) and 2-cyclohexen-1- hydroperoxide (4), which was different with typical oxidation of cyclohexene. The influence of reaction temperature and additive for oxidation had been studied. The selectivity of 2-cyclohexen-1-hydroperoxide varied with reaction time and different additives. The mechanism of cyclohexene oxidation had also been discussed.展开更多
A kind of molecularly imprinted polymer (MIPs) with high selectivity was prepared using methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylate (EDMA) as crosslinker and Gatifloxacin as template. ...A kind of molecularly imprinted polymer (MIPs) with high selectivity was prepared using methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylate (EDMA) as crosslinker and Gatifloxacin as template. The effect of various parameters such as volume of solvent, functional monomer dosage, crosslinker dosage and polymerization time were investigated. The selective binding experiment for substrates show that the affinity and selectivity for Gatifloxacin were higher than that for blank polymer. Scatchard analysis show that the MIPs recognized template with two kinds of binding sites. The dissociation constant Kd and maximum adsorption quantity Qmax of these two kinds of binding sites were calculated: Kd1 and Qmax1 of the binding sites with high affinity were 8.67×10-4 mol/L and 28.19μmol/g, while Kd2 and Qmax2 of the binding sites with low affinity were1.05×10-3 mol/L and 33.20μmol/g respectively.展开更多
Batch adsorption experiments were carried out for the removal of methylene blue (MB) from aqueous solution using attapulgite as adsorbent. The effects of various parameters such as temperature, contact time, the pH va...Batch adsorption experiments were carried out for the removal of methylene blue (MB) from aqueous solution using attapulgite as adsorbent. The effects of various parameters such as temperature, contact time, the pH value, and attapulgite dosage on the adsorption performance were investigated. The standard curve and regression equation were established by spectrophotometry. The adsorption experimental results showed that the adsorption equilibrium data were well in accord with Langmuir adsorptive model. The optimal result was acquired under the experimental condition of attapulgite dosage 0.18g, MB concentration 50.0mg/L, pH 10, and adsorption time 20min at room temperature.展开更多
文摘The polystyrene supported glutamic acid Schiff base complex of Mn ( Ⅱ ) (PS-Sal-Glue-Mn) was prepared with chloromethylated styrene polymer beads, 2,4-dihydroxybenzaldehyde, L-glutamic acid and manganese ( Ⅱ ) acetate tetrahyrate. The polymeric ligand and the complex were characterized by FT-IR, small area X-ray photoelectron spectroscopy (XPS) and 1CP-AES. In the presence of the manganese complex, cyclohexene (1) was effectively oxidized by molecular oxygen without reductant. The major products of the reaction were 2-cyclohexen-l-ol (2), 2-cyclohexen-l-one (3) and 2-cyclohexen-1- hydroperoxide (4), which was different with typical oxidation of cyclohexene. The influence of reaction temperature and additive for oxidation had been studied. The selectivity of 2-cyclohexen-1-hydroperoxide varied with reaction time and different additives. The mechanism of cyclohexene oxidation had also been discussed.
基金China National Science Foundation (No. 20877036)Jiangsu University Science Research Funding (No. 04JDG017).
文摘A kind of molecularly imprinted polymer (MIPs) with high selectivity was prepared using methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylate (EDMA) as crosslinker and Gatifloxacin as template. The effect of various parameters such as volume of solvent, functional monomer dosage, crosslinker dosage and polymerization time were investigated. The selective binding experiment for substrates show that the affinity and selectivity for Gatifloxacin were higher than that for blank polymer. Scatchard analysis show that the MIPs recognized template with two kinds of binding sites. The dissociation constant Kd and maximum adsorption quantity Qmax of these two kinds of binding sites were calculated: Kd1 and Qmax1 of the binding sites with high affinity were 8.67×10-4 mol/L and 28.19μmol/g, while Kd2 and Qmax2 of the binding sites with low affinity were1.05×10-3 mol/L and 33.20μmol/g respectively.
文摘Batch adsorption experiments were carried out for the removal of methylene blue (MB) from aqueous solution using attapulgite as adsorbent. The effects of various parameters such as temperature, contact time, the pH value, and attapulgite dosage on the adsorption performance were investigated. The standard curve and regression equation were established by spectrophotometry. The adsorption experimental results showed that the adsorption equilibrium data were well in accord with Langmuir adsorptive model. The optimal result was acquired under the experimental condition of attapulgite dosage 0.18g, MB concentration 50.0mg/L, pH 10, and adsorption time 20min at room temperature.