Macro-micro behaviors and failure mechanism of frozen weakly cemented mudstone

Understanding the mechanical properties and multiscale failure mechanism of frozen soft rock is an important prerequisite for the construction safety of tunnels,artificially frozen ground and other infrastructure in cold regions.In this study,the triaxial compression test are performed on mudstone in the weakly cemented soft rock strata in the mining area of western China,and the mechanical characteristics and failure mechanism of weakly cemented mudstone are systematically investigated under the combined action of freezing and loading.Furthermore,the quantitative relationship between the microstructural parameters and the macroscopic strength and deformation parameters is established based on fractal theory.Thus,the failure mechanism of frozen weakly cemented mudstone is revealed on both micro- and macro-scales.The results show that temperature and confining pressure significantly affects the elastic modulus and peak strength of weakly cemented mudstone.With decreasing temperature,the compressive strength increases,while the corresponding peak strain decreases gradually.On the deformation curve,the plastic deformation stage is shortened,and the brittle fracture feature at the post-peak stage is more prominent,and the elastic modulus correspondingly increases with decreasing temperature.Under low-temperature conditions,most of the weakly cemented mudstone undergoes microscopic shear failure along the main fracture surface.The micro-fracture morphology characteristics of weakly cemented mudstone under different temperatures are quantified via the fractal dimension,and an approximately exponential relationship can be obtained among the fractal dimension and the temperature,compressive strength and elastic modulus.

Changes in Sediment Sources in the Southern Muddy Area of Weihai,China,Since the Late Pleistocene:A Record from Rare Earth Elements

The small muddy areas developed in the southern Shandong Peninsula have attracted increasing attention from researchers because of complex changes in sediment sources driven by sea-level fluctuations and land-sea interactions since the late Pleistocene.This study investigates the evolution of sediment sources and their responses to environmental changes since the late Pleistocene,using core WHZK01 collected from the nearshore muddy area in southern Weihai for rare earth element(REE)analysis.In doing so,this work highlights the changing patterns of material sources and the primary control factors.The results reveal that the sedimentary deposits in core WHZK01 exhibit distinct terrestrial characteristics.Discriminant function analysis(F_(D))and source discrimination dia-grams both suggest that the primary sources of these deposits are the Yellow River and adjacent small and medium-sized rivers,although the sources vary among different sedimentary units.Furthermore,the DU3 layer(17.82-25.10 m)displays typical riverine sedimentation,dominated by terrestrial detrital input,primarily from the local rivers,namely the Huanglei and Muzhu Rivers.The material in the DU2 layer(14.91-17.82 m)is mainly influenced by a mixture of the Qinglong and Yellow Rivers.The DU1 layer(0-14.91 m)is influenced by sea-level changes during the Holocene,with the Yellow River being the primary source,although there is also some input from local rivers.The changes in sea level during the Holocene and the input of Yellow River material carried by the coastal currents of the Yellow Sea are identified as the main controlling factors for the changes in material sources in the study area since the late Pleistocene,with small and mediumsized rivers also exerting some influence on the material sources.The above mentioned findings not only contribute to a better understanding of the source-sink systems of the Yellow River and adjacent small and mediumsized rivers but also deepen our understanding of the late Quaternary land-sea interactions in the Shandong Peninsula.

The occurrence characteristics of oil in shales matrix from organic geochemical screening data and pore structure properties:An experimental study Author links open overlay panel

The occurrence characteristics of shale oil are of great significance to the movability of shale oil.In this study,the occurrence characteristics of oil in the shale matrix at Funing Formation shale in Subei Basin were quantitatively evaluated by organic geochemistry and microscopic pore structure characterization experiments.The Multiple Isothermal Stages Pyrolysis(MIS)experiment results show that the content of total oil,adsorbed oil,and free oil in the shales are 3.15-11.25 mg/g,1.41-4.95 mg/g,and 1.74-6.51 mg/g,respectively.among which the silicon-rich shale has the best oil-bearing.The relative content of free oil shows an increasing trend in pores with pore diameters greater than 3 nm.When the relative content of free oil reaches 100%,the pore size of silicon-rich shale is about 200 nm,while that of calcium-rich shale,clay-rich shale,and siliceous mixed shale is about 10 nm.The occurrence law of adsorbed oil is opposite to that of free oil,which indicates that shale oil will occur in the pores and fractures in a free state in a more extensive pore size range(>200 nm).This study also enables us to further understand the occurrence characteristics of shale oil under the interaction of occurrence state and occurrence space.

Sedimentary Characteristics,Ages,and Environmental Significance of Gravel Deposits and Loess in Shandong,Eastern China:Regional Response to Global Change Since the Last Glacial Period

Investigation of rarely studied gravel layers found in the loess in Shandong Province,eastern China,reveals the fabric characteristics of two gravel layers(G1,G2)and the sedimentary characteristics of loess at the typical and well-preserved Heiyu section(HY),where,to determine the paleoclimatic changes during Marine Isotope Stage 3a.Optically stimulated luminescence dates of the HY formation range from 0.26±0.02 ka to 39.00±2.00 ka.In addition,the ages of G1 and G2 were estimated using the Bayesian model to be 39.60-40.50 and 29.00-29.50 ka.G1 and G2 are mainly composed of fine and medium gravel,both of which were subangular to subrounded limestone,with gravel directions to NE and E.The average flow velocity,average depth,and flood peak flow of G1 are 1.10 m/s,0.49 m,and 37.04 m^(3)/s,respectively,calculated using the flow energy method,whereas those of G2 are 0.98 m/s,0.38 m,and 18.38 m^(3)/s,respectively.Analysis of climate proxy indices show that the sedimentary environment of the gravel and loess in HY might be a regional response to global change.

Deformation,structure and potential hazard of a landslide based on InSAR in Banbar county,Xizang(Tibet)

The Tibetan Plateau is characterized by complex geological conditions and a relatively fragile ecological environment.In recent years,there has been continuous development and increased human activity in the Tibetan Plateau region,leading to a rising risk of landslides.The landslide in Banbar County,Xizang(Tibet),have been perturbed by ongoing disturbances from human engineering activities,making it susceptible to instability and displaying distinct features.In this study,small baseline subset synthetic aperture radar interferometry(SBAS-InSAR)technology is used to obtain the Line of Sight(LOS)deformation velocity field in the study area,and then the slope-orientation deformation field of the landslide is obtained according to the spatial geometric relationship between the satellite’s LOS direction and the landslide.Subsequently,the landslide thickness is inverted by applying the mass conservation criterion.The results show that the movement area of the landslide is about 6.57×10^(4)m^(2),and the landslide volume is about 1.45×10^(6)m^(3).The maximum estimated thickness and average thickness of the landslide are 39 m and 22 m,respectively.The thickness estimation results align with the findings from on-site investigation,indicating the applicability of this method to large-scale earth slides.The deformation rate of the landslide exhibits a notable correlation with temperature variations,with rainfall playing a supportive role in the deformation process and displaying a certain lag.Human activities exert the most substantial influence on the spatial heterogeneity of landslide deformation,leading to the direct impact of several prominent deformation areas due to human interventions.Simultaneously,utilizing the long short-term memory(LSTM)model to predict landslide displacement,and the forecast results demonstrate the effectiveness of the LSTM model in predicting landslides that are in a continuous development and movement phase.The landslide is still active,and based on the spatial heterogeneity of landslide deformation,new recommendations have been proposed for the future management of the landslide in order to mitigate potential hazards associated with landslide instability.

Formation environment and hydrocarbon potential of the Paleogene Enping Formation coal measures in the ZhuⅠDepression of northern South China Sea

The coal-measure source rock in the Chinese sea area plays a significant role as a hydrocarbon source rock,with its genetic environment,development and distribution,and hydrocarbon generation potential serving as essential factors for the exploration of coal-type oil and gas fields.This study focuses on the coal-measure source rock of the Paleogene Enping Formation in the ZhuⅠDepression,located in the northern South China Sea.The main geological insights obtained are as follows.The coal measures of the Enping Formation are developed in a warm and wet tropical-subtropical climate.The development environment of the coal-measure source rock in the Enping Formation includes the braided river delta upper plain peat swamp,characterized by dry forest swamp coal facies with relatively thick coal seams and a small number of layers.The braided river delta lower plain swamp-interdistributary bay of braided river delta front represents a forest edge-wetland herbaceous swamp coal facies with numerous layers of thin coal seams and poor stability.The shore swamp corresponds to an open water swamp coal facies with multiple layers of thin coal seams and poor stability.The organic matter abundance in the braided river delta upper plain is the highest,followed by the braided river delta lower plain-braided river delta front,and the shore-shallow lake.The organic matter type is predominantly typeⅡ1.Thermal evolution analysis suggests that the organic matter has progressed into a substantial oil generation stage.The hydrocarbon generation potential of the coal-measure source rock in the Enping Formation is the highest in the braided river delta upper plain,followed by the braided river delta lower plain-braided river delta front and the shore-shallow lake.Overall,this study proposes three organic facies in the coal-measure source rock of the Enping Formation:upper-plain swamp-dry forest swamp facies,lower plain-interdistributary bay-forest-herbaceous swamp facies,and lake swamp-herbaceous swamp facies.

Cu-Zn isotope compositions of hydrothermal sediments from the southern Mid-Atlantic Ridge:implications to the sediment formation and mineral exploration

Six hydrothermal sediment samples were collected from the Xunmei and Tongguan hydrothermal fields along the southern Mid-Atlantic Ridge during the China Ocean Cruise DY46 in 2017.Sulfides and oxides in the samples were separated,and Cu and Zn isotope compositions were analyzed.Results show that the ranges ofδ^(65)Cu values of the bulk sediments,sulfides,and oxides were 0.36‰-2.46‰,-0.21‰-1.10‰,and 0.68‰-1.52‰,respectively.Theδ^(65)Cu values of sulfides in four samples(46II-14,46II-30,46III-06,and 46II-09)were relatively low(-0.21‰-0.50‰),corresponding to theδ^(65)Cu values of sulfides from inactive old hydrothermal chimneys in northern Mid-Atlantic Ridge(n MAR),suggesting that the sulfides in the sediments were originated from collapsed dead chimney mainly.While theδ^(65)Cu values of the other two samples(46III-02 and 46III-08)were relatively high(1.10‰-0.96‰),corresponding to theδ^(65)Cu values for active hydrothermal chimneys sulfides in n MAR,which indicated that the sulfides in these two samples might mainly come from sulfide particles settled from active hydrothermal plume.Because of the high density of sulfide particles,they tended to settle near the hydrothermal vents first.Therefore,highδ^(65)Cu values of sulfides in 46III-02 and 46III-08 implied that undiscovered active hydrothermal vents near the sampling positions of 46III-02 in the Xunmei hydrothermal field and 46III-08 in the Tongguan hydrothermal field.Theδ^(66)Zn values of hydrothermal sediments and sulfides ranged 0.11‰-0.43‰and 0.29‰-0.67‰,respectively.In the four samples from the Xunmei hydrothermal field,a positive correlation was found between the distance of the sampling position from sulfide mineralized spot and the Zn isotopic ratio,showing that the greater the distance from the mineralized spot,the heavier the Zn isotope composition as seen in two samples(46II-30 and 46II-14)of the Xunmei-3 spot.This result aligned with the findings of Wilkinson et al.(2005)and Baumgartner et al.(2023),suggesting that the lower the Zn isotope composition,the closer it is to the hydrothermal vent.However,in the Xunmei hydrothermal field,the Zn isotope composition in the other two samples(46III-02and 46III-06)showed the opposite trend.This indicated that there might be an active hydrothermal vent near the sampling location of sample 46III-02.This observation aligned with the Cu isotope analysis results.This study showed that Cu-Zn isotopes are good indicators for understanding the formation mechanisms of hydrothermal sediments and for locating active hydrothermal vents.

Trace Elements of Multi-stage Minerals and Titanite U-Pb Dating for the Gneisses from Liansan Island,Sulu UHPM Belt

Gneisses with anatectic characteristics from the Liansan island in the Sulu UHPM(ultra-high pressure metamorphic)belt were studied for petrography,titanite U-Pb dating and mineral geochemistry.Three origins of garnets are distinguished:metamorphic garnet,peritectic garnet and anatectic garnet,which are formed in the stages of peak metamorphism,retrograde anatexis and melt crystallization,respectively.The euhedral titanite has a high content of REE and high Th/U ratios,which is interpreted as indicating that it was newly-formed from an anatectic melt.The LA-ICP-MS titanite U-Pb dating yields 214-217 Ma ages for the titanite(melt)crystallization.The distribution of trace elements varies in response to the different host minerals at different stages.At the peak metamorphic stage,Y and HREE are mainly hosted by garnet,Ba and Rb by phengite,Sr,Nb,Ta,Pb,Th,U and LREE by allanite and Y,U and HREE by zircon.During partial melting,Y,Pb,Th,U and REE are released into the melt,which causes a dramatic decline of these element contents in the retrograde minerals.Finally,titanite absorbs most of the Nb,U,LREE and HREE from the melt.Therefore,the different stages of metamorphism have different mineral assemblages,which host different trace elements.

Geochronology,Mineralogy,and Geochemistry of the Tonsteins from the Permo–Carboniferous Benxi Formation,Ordos Basin,North China Craton

Tonstein layers are found worldwide in the Permo-Carboniferous coal-bearing strata.This study investigates the geochronology,mineralogy,and geochemistry of four tonstein samples from the Permo-Carboniferous Benxi Formation,Ordos Basin,North China Craton(NCC).The typical features of the studied tonsteins include thin beds,lateral continuity,angular quartz grains,and euhedral zircons with similar U-Pb ages,indicating a significant pyroclastic origin.In addition,the tonstein samples have low TiO_(2)/Al_(2)O_(3)ratios(<0.02)and rare earth elements and yttrium(REY)concentrations with obvious negative Eu anomalies,indicating that the tonsteins have a felsic magma origin.Moreover,compared with the mean composition of clay shale,the studied tonsteins are characterized by high concentrations of the elements Nb and Ta,which may affect the concentration of the corresponding elements in surrounding coal seams.The zircon U-Pb ages of the tonsteins(293.9-298.8 Ma)provide a precise chronological framework on the Benxi Formation in the Ordos Basin,constraining the Gzhelian-Aselian stages.The tonsteins were probably sourced from arc volcanism along the western margin of the NCC during the early Permian,implying that the Alxa Terrane had not amalgamated with the NCC at that time.

Occurrence state and oil content evaluation of Permian Fengcheng Formation in the Hashan area as constrained by NMR and multistage Rock-Eval

The Hashan area,neighboring the Mahu Sag that is rich in the shale oil resources,showed commercial oil flow in the corresponding lacustrine shales of the Lower Permian Fengcheng Formation(P)with reserve scale approximately 789 million tons,presenting great potential for oil exploration.Despite their geographical proximity,the hydrocarbon occurrence and oil-bearing capacity of shale in the Hashan area and Mahu Sag greatly differ owing to the complex tectonic evolution.Therefore,understanding the occurrence state and oil content of the Pif in the Hashan area is crucial for ongoing shale oil exploration activities and the development of the northwestern margin of the Junggar Basin.In this study,an in-tegrated investigation,including petrological observations,scanning electron microscopy(SEM)obser-vation,analysis of nuclear magnetic resonance(NMR)Ti-T2 spectra,and conventional and multistage Rock-Eval pyrolysis methods were conducted to evaluate the occurrence state and oil content of the Pif shale in the Hashan area.The results indicate that plagioclase(average 30.7%)and quartz(24.1%)dominate the mineral compositions of the Pf shale samples.A method involving quartz-plagioclase-carbonate minerals is proposed to conduct lithofacies classification.In the Hashan area,the organic matter abundance in the Pf shale is scaled in fair to good range,the thermal maturity ranges from immature to early mature stage,and the primary organic matter types are Types I and Ilj.Intergranular and dissolution pores are the two most common pore types.The free oil is mostly found in the pores and microfractures of the mineral matrix,whereas the adsorbed oil is mostly adsorbed on the surfaces of kerogen and clay minerals.The high organic matter abundance,quartz content,and porosity account for substantial increase in the oil content,the area rich in shale oil resources coincides with that rich in free oil.The most favorable lithofacies in the Hashan area is the calcareous mudstone/shale,which hosts the highest free oil content(average 2.49 mg),total oil content(15.02 mg/g),organic matter abundance CTOC:1.88% and S_(1)+S_(2)=20.54mg/g and orositv(5.97%)

Quantitative characterization of shale pore connectivity and controlling factors using spontaneous imbibition combined with nuclear magnetic resonance T_(2)and T_(1)-T_(2)

Shale oil can be extracted from shale by using interconnected pore networks.The migration of hydrocarbon molecules within the shale is controlled by pore connectivity.However,assessing the pore connectivity of shale oil reservoirs is uncommon.To characterize pore connectivity and clarify its controlling factors,this study used spontaneous imbibition(SI)combined with nuclear magnetic resonance(NMR)T_(2)and T_(1)-T_(2)technologies on shale oil reservoirs selected from the Shahejie Formation in the Dongying Sag,Bohai Bay Basin.According to the findings,the SI processes of shales include fast-rising,slow-rising,and stable stages.The fast-rising stage denotes pore connectivity.The shales studied have poor connectivity,with lower imbibition slopes and connected porosity ratios,but large effective tortuosity.During the SI process,micropores have the highest imbibition saturation,followed by mesopores and macropores.Furthermore,n-dodecane ingested into micropores appears primarily as adsorbed,whereas n-dodecane appears primarily as free states in mesopores and macropores during the SI process.The pore connectivity of the shales under study is primarily controlled by inorganic minerals.Quartz and feldspar develop large and regular pores,resulting in better pore connectivity,whereas clay minerals and calcite with plenty of complex intragranular pores do not.Organic matter negatively influences pore connectivity because the dissolution of calcite by organic acid produced during hydrocarbon generation leads to a more complex and heterogeneous pore structure.This study sheds light on the pore connectivity and controlling factors of the shale oil reservoir and aids in the understanding of shale oil mobility.

Using Geochemistry of Rare Earth Elements to Indicate Sediment Provenance of Sand Ridges in Southwestern Yellow Sea

The Jianggang Harbour-centered radial sand ridge(RSR) is the largest sand body in the Yellow Sea. Its formation and evolution are of interest for scientists of various fields; however, the sediment provenance is uncertain. In this study, rare earth element(REE) geochemical compositions of the RSR sediments together with their potential sources are investigated to identify the provenance of the RSR sediments. The typical parameters((La/Yb)_N,(La/Sm)_N and(Gd/Yb)_N) as well as the upper continental crust-normalized patterns of REEs can only be associated with source rocks, and thus can be used as effective tracers for the origin and sources of sediments. However, the REE contents of sediments are affected by many factors, such as particle sorting and chemical weathering. Onshore RSR sediments are different in REE geochemical composition from offshore RSR sediments to some extent, suggesting that not all of the offshore RSR sediments have the same sources as the onshore RSR sediments. Meanwhile, the sediments adjacent to the northeast of Cheju Island and at Lian Island near the Lianyun Harbour were not the source of the RSR sediments due to their distinctive REE patterns, dEu,(La/Yb)_N,(Gd/Yb)_N and(La/Sm)_N. The Korean river sediments could be dispersed to the Jiangsu Coast slightly impacting the fine fractions of the RSR sediments, particularly the offshore RSR sediments. Additionally, geochemical comparisons show that the modern Yellow River was responsible for the onshore RSR sediments, whereas the sediment loads from the Yangtze River could serve as a major contributor to the RSR, particularly the offshore RSR. In addition, the offshore RSR could also be partly fed by an unknown source due to some high values of(La/Yb)_N,(La/Sm)_N and La contents differing from those of the Chinese and Korean river sediments.

Deep learning CNN-APSO-LSSVM hybrid fusion model for feature optimization and gas-bearing prediction

Conventional machine learning(CML)methods have been successfully applied for gas reservoir prediction.Their prediction accuracy largely depends on the quality of the sample data;therefore,feature optimization of the input samples is particularly important.Commonly used feature optimization methods increase the interpretability of gas reservoirs;however,their steps are cumbersome,and the selected features cannot sufficiently guide CML models to mine the intrinsic features of sample data efficiently.In contrast to CML methods,deep learning(DL)methods can directly extract the important features of targets from raw data.Therefore,this study proposes a feature optimization and gas-bearing prediction method based on a hybrid fusion model that combines a convolutional neural network(CNN)and an adaptive particle swarm optimization-least squares support vector machine(APSO-LSSVM).This model adopts an end-to-end algorithm structure to directly extract features from sensitive multicomponent seismic attributes,considerably simplifying the feature optimization.A CNN was used for feature optimization to highlight sensitive gas reservoir information.APSO-LSSVM was used to fully learn the relationship between the features extracted by the CNN to obtain the prediction results.The constructed hybrid fusion model improves gas-bearing prediction accuracy through two processes of feature optimization and intelligent prediction,giving full play to the advantages of DL and CML methods.The prediction results obtained are better than those of a single CNN model or APSO-LSSVM model.In the feature optimization process of multicomponent seismic attribute data,CNN has demonstrated better gas reservoir feature extraction capabilities than commonly used attribute optimization methods.In the prediction process,the APSO-LSSVM model can learn the gas reservoir characteristics better than the LSSVM model and has a higher prediction accuracy.The constructed CNN-APSO-LSSVM model had lower errors and a better fit on the test dataset than the other individual models.This method proves the effectiveness of DL technology for the feature extraction of gas reservoirs and provides a feasible way to combine DL and CML technologies to predict gas reservoirs.

Extensive Resetting of Feldspar Pb Isotopic Composition in Archean–Paleoproterozoic Granitic Rocks from the Kongling Terrane,South China:Implications for Tracing Thermal Evolutionary History

Feldspar Pb isotopes have been widely used to trace magmatic formation and evolution processes.However,it remains unclear whether post-magmatic thermal events can affect feldspar Pb isotopic ratios.Here,the in situ Pb isotopic composition of feldspar hosted in granitic rocks(thirteen Archean and one Paleoproterozoic)from the northern Kongling terrane,Yangtze Craton,South China,is analyzed.The samples reveal a substantial variation in their Pb isotopic composition,spanning the gap between the 1.9 Ga and present-day geochrons,which indicates extensive resetting by later tectonothermal events.This resetting was interpreted to have likely resulted from Paleoproterozoic and Neoproterozoic tectonothermal events related to the assembly and breakup of the Columbia and Rodinia supercontinents.These results suggest that Pb isotopes should be used cautiously when tracing magma sources and petrogenesis in magmatic rocks that have experienced post-magmatic reworking.However,the in situ Pb isotopic composition of feldspar in ancient granitoids may also potentially be used to reveal later tectonothermal events.The extensive resetting of the Pb isotopic composition in feldspar by regional thermal events may also provide new insights into our understanding of the Pb isotope paradox.

Quantifying the Effects of Near-Surface Viscosity on Seismic Acquisition Geometry: A case study from Chepaizi Exploration Area, Junggar Basin (NW China)

The Chepaizi Exploration Area,Junggar Basin(NW China)holds substantial importance for seismic exploration endeavors,yet it poses notable challenges due to the intricate nature of its subsurface and near-surface conditions.To address these challenges,we introduce a novel and comprehensive workflow tailored to evaluate and optimize seismic acquisition geometries while considering the impacts of near-surface viscosity.By integrating geological knowledge,historical seismic data,and subsurface modeling,we conduct simulations employing the visco-acoustic wave equation and reverse-time migration to produce detailed subsurface images.The quality of these images is quantitatively evaluated using a local similarity metric,a pivotal tool for evaluating the accuracy of seismic imaging.The culmination of this workflow results in an automated optimization strategy for acquisition geometries that enhances subsurface exploration.Our proposed methodology underscores the importance of incorporating near-surface viscosity effects in seismic imaging,offering a robust framework for improving the accuracy of subsurface imaging.Herein,we aim to contribute to the advancement of seismic imaging methodologies by providing valuable insights for achieving high-quality seismic exploration outcomes in regions characterized by complex subsurface and near-surface conditions.

Early-diverging Titanosauriform(Dinosauria,Sauropoda)Teeth from the Lower Cretaceous Yixian Formation of Southeastern Inner Mongolia,Northeast China

Three eusauropod teeth(SDUST-V1064,PMOL-AD00176,PMOL-ADt0005)are reported from the Lower Cretaceous Yixian Formation of Ningcheng,southeastern Inner Mongolia,China.Two of them(SDUST-V1064,PMOL-AD00176)are assigned to early-diverging titanosauriforms in having slightly mesiodistal expansion at the base of the tooth crown,a slenderness index value>2.0 and<4.0,and D-shaped cross section.Furthermore,SDUST-V1064 and PMOL-AD00176 are referred as an Euhelopus-like titanosauriform on the basis of having a sub-circular boss on the lingual surface and an asymmetrical crown-root margin which slants apically,respectively.CT scan data of SDUST-V1064 reveals new dental information of early-diverging titanosauriforms,for example,the enamel on the labial side thicker than that on the lingual side,an enamel/dentine ratio of 0.26 and a boss present on the lingual side of the dentine of the crown.

Astronomical influence of the development of Paleogene thin coal seam groups in offshore Lacustrine basins:A case study of the ZhuⅠDepression's Enping Formation located in the northern South China Sea

The development of the Paleogene coal seams in China's offshore basin areas generally had the characteristics of coal measures with large thicknesses,large numbers of coal seams,thin single coal seams,poor stability,scattered vertical distribution,and a wide distribution range.This study selected the Enping Formation of the ZhuⅠDepression in the northern section of the South China Sea as an example to determine the macro-control factors of the development of the Paleogene coal seam groups.An analysis was carried out on the influencing effects and patterns of the astronomical cycles related to the development of the thin coal seam groups in the region.A floating astronomical time scale of the Enping Formation was established,and the sedimentary time limit of the Enping Formation was determined to be approximately 6.15 Ma±.In addition,the cyclostratigraphy analysis results of the natural gamma-ray data of Well XJ in the Enping Formation of the Xijiang Sag revealed that the development of the thin coal seams had probably been affected by short eccentricity and precession factors.The formation process of coal seams was determined to have been affected by high seasonal contrast,precipitation,and insolation.During the periods with high values of short eccentricity,the seasonal contrasts tended to be high.During those periods,fluctuations in the precession controls resulted in periodic volume changes in precipitation and insolation of the region,resulting in the development of thin coal seams.It was also found that the periods with low precession were the most conducive to coal seam development.On that basis,combined with such factors as sedimentary environmental conditions conducive to the development of thin coal seam groups,this study established a theoretical model of the comprehensive influences of short eccentricity and precession on the development and distribution of Paleogene thin coal seam groups in offshore lacustrine basins.The patterns of the Paleogene astronomical periods and paleoclimate evolution,along with the control factors which impacted the development of thin coal seam groups in offshore lacustrine basins,were revealed.

Early Devonian Post-collisional Granitic Magmatism in the North Qilian Orogenic Belt,Western China:Insights into Lithospheric Delamination and Orogenic Collapse

Post-collisional magmatism contains important clues for understanding the reworking and growth of continental crust,as well as lithospheric delamination and orogenic collapse.Early Devonian magmatism has been identified in the North Qilian Orogenic Belt(NQOB).This paper reports an integrated study of petrology,whole-rock geochemistry,Sm-Nd isotope and zircon U-Pb dating,as well as Lu-Hf isotopic data,for two Early Devonian intrusive plutons.The Yongchang and Chijin granites yield zircon U-Pb ages of 394-407 Ma and 414 Ma,respectively.Both of them are characterized by weakly peraluminous to metaluminous without typical aluminium-rich minerals,LREE-enriched patterns with negative Eu anomalies and a negative correlation between P_(2)O_(5) and SiO_(2) contents,consistent with geochemical features of I-type granitoids.Zircons from the studied granites display negative to weak positive ε_(Hf)(t)values(−5.7 to 2.1),which agree well with those of negative ε_(Nd)(t)values(−6.4 to−2.9)for the whole-rock samples,indicating that they were derived from the partial melting of Mesoproterozoic crust.Furthermore,low Sr/Y ratios(1.13-21.28)and high zircon saturation temperatures(745℃ to 839℃,with the majority being>800℃)demonstrated a relatively shallow depth level below the garnet stability field and an additional heat source.Taken together,the Early Devonian granitic magmatism could have been produced by the partial melting of ancient crustal materials heated by mantle-derived magmas at high-temperature and low-pressure conditions during postcollisional extensional collapse.The data obtained in this study,when viewed in conjunction with previous studies,provides more information about the tectonic processes that followed the closure of the North Qilian Ocean.The tectonic transition from continental collision to post-collisional delamination could be constrained to~430 Ma,which is provided by the sudden decrease of Sr/Y and La/Yb ratios and an increase in zircon ε_(Hf)(t)values for granitoids.A two-stage tectonic evolution model from continental collision to post-collisional extensional collapse for the NQOB includes(a)continental collision and crustal thickening during ca.455-430 Ma,characterized by granulite-facies metamorphism and widespread low-Mg adakitic magmatism;(b)post-collisional delamination of thickened continental crust and extensional collapse of orogen during ca.430-390 Ma,provided by coeval high-Mg adakitic magmatism,A-type granites and I-type granitoids with low Sr-Y ratios.

Geological and Geochemical Characteristics and Exploration Prospect of Coal-Derived Tight Sandstone Gas in China： Case Study of the Ordos, Sichuan, and Tarim Basins

This work extensively investigated global tight sandstone gas, and geologically and geochemically analyzed the tight sandstone gas in China＇s Ordos, Sichuan, and Tarim basins. We compared typical tight sandstone gas in China with that in North America. We proposed six conditions for the formation of China＇s tight sandstone gas, and illustrated the geological characteristics of tight sandstone gas. In China, gas-bearing tight sandstones were mainly deposited in continental lake deltas and marine-terrigenous facies basin environments, associated with coal-measure strata, and were mostly buried deeper than 2000 in under a formation pressure of 20-30 MPa, with pressure coefficients varying from overpressure to negative pressure. In other countries, tight gas bearing sandstones were dominantly deposited in marine to marine-terrigenous facies environments, occurred in coal-measure strata, and were mostly buried shallower than 2000 m in low-pressure systems. We systematically analyzed tight sandstone gas in the Ordos, Sichuan, and Tarim basins in terms of chemical compositions, geochemical characteristics of carbon isotopes, origins, and sources. Tight sandstone gas in China usually has a hydrocarbon content of 〉95%, with CH4 content 〉90%, and a generally higher dry coefficient. In the three above-mentioned large tight sandstone gas regions,δ13C1 and δJ3C2 mainly ranges from -42%o to -28%o and from -28%o to -21%o, respectively. Type III coal-measure source rocks that closely coexist with tight reservoirs are developed extensively in these gas regions. The organic petrology of source rocks and the carbon isotope compositions of gas indicate that tight sandstone gas in China is dominantly coal-derived gas generated by coal-measure strata. Our analysis of carbon isotope series shows that local isotope reversals are mainly caused by the mixing of gases of different maturities and that were generated at different stages. With increasing maturity, the reversal tendency becomes more apparent. Moreover, natural gas with medium-low maturity （e.g., Xujiahe Formation natural gas in the Sichuan Basin） presents an apparent reversal at a low-maturity stage, a normal series at a medium -maturity stage, and a reversal tendency again at a high-maturity stage. Finally, we proposed four conditions for preferred tight sandstone gas ＂sweep spots,＂ and illustrated the recoverable reserves, proven reserves, production, and exploration prospects of tight sandstone gas. The geological and geochemical characteristics, origins, sources, and exploration potential of tight sandstone gas in China from our research will be instructive for the future evaluation, prediction, and exploration of tight sandstone gas in China and abroad.

Characteristics of Meso-Cenozoic Igneous Complexes in the South Yellow Sea Basin,Lower Yangtze Craton of Eastern China and the Tectonic Setting

The South Yellow Sea Basin is partially surrounded by the East Asian continental Meso- Cenozoic widespread igneous rocks belt. Magnetic anomaly and multi-channel seismic data both reveal the prevalent occurrence of igneous rocks. We preliminarily defined the coupling relation between magnetic anomalies and igneous rock bodies. Some igneous complexes were also recognized by using multi-channel seismic and drilling data. We identified various intrusive and extrusive igneous rock bodies, such as stocks, sills, dikes, laccoliths and volcanic edifice relics through seismic facies analysis. We also forecasted the distribution characteristics of igneous complexes. More than fifty hypabyssal intrusions and volcanic relics were delineated based on the interpretation of magnetic anomaly and dense intersecting multi-channel seismic data. It is an important supplement to regional geology and basin evolution research. Spatial matching relations between igneous rock belts and fractures document that extensional N-E and N-NE-trending deep fractures may be effective pathways for magma intrusion. These fractures formed under the influence of regional extension during the Meso- Cenozoic after the Indosinian movement. Isotopic ages and crosscutting relations between igneous rock bodies and the surrounding bedded sedimentary strata both indicate that igneous activities might have initiated during the Late Jurassic, peaked in the Early Cretaceous, gradually weakened in the Late Cretaceous, and continued until the Miocene. Combined with previous studies, it is considered that the Meso-Cenozoic igneous activities, especially the intensive igneous activity of the Early Cretaceous, are closely associated with the subduction of the Paleo-Pacific Plate.