Effect of nutrient level on phytoplankton community structure in different water bodies

Increasing levels of pollution within water bodies can cause eutrophication and an associated rapid growth in and reproduction of phytoplankton. Although most frequently occurring in bodies of water such as lakes and dams, in recent years an increasing number of river systems in China have suffered serious algal blooms. The community structure of phytoplankton may differ, however, dependent on the hydrodynamic conditions and nutrient levels within the water body. The field investigation results obtained from a stagnant river in Suzhou City and Taihu Lake, China, showed that in water with higher concentrations of nitrogen and phosphorus, Chlorophyta became the predominant species and in water with lower concentrations of nitrogen and phosphorus, Cyanobacteria became the predominant species. Growth experiments with competitive species, Microcystis aeruginosa Kutz and Scenedesmus quadricauda （Turp.）, were conducted at three different nutrient levels. The biomass of algae in pure and mixed cultures was measured under conditions of different N/P ratios at oligotrophic, eutrophic and hypertrophic nutrient levels. The results indicated that the most suitable state for the growth and reproduction of M. aeruginosa and S. quadricauda were eutrophic conditions in both pure and mixed cultures. Under competition, however, the lower medium nutrient levels favoured M. aeruginosa, while the higher medium nutrient levels better suited S. quadricauda. Under similar hydrodynamic conditions, the community structure of phytoplankton in the water body was determined by the dominant species in competition for nutrients.

Speciation of heavy metals in surface sediments from Suzhou Creek

Nine elements （As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn） in sediment samples at 7 sites （Site 1-7） from Suzhou Creek in Shanghai were analyzed with the Community Bareau of Reference （BCR） （sequential extraction （SE）） protocol and simultaneously extracted metals （SEM）/acid volatile sulfide （AVS） procedure to assess the metal bioavailability and toxicology in this area. The results showed that the BCR extraction can be utilized as an additional tool with the AVS method for assessing the potential bioavailability and toxicity of metals in sediments. Pollution from S5 （Site 5） was more severe than from other sites, especially Pb, Cu and Zn. Among all the sites, more than 80% of the total concentration of Fe existed in the residual fraction, As, Cr, Mn also dominated in the residual fraction （more than 50%）. While Cd, Ni and Zn （more than 35%） were mainly in the non-stable phase. Cu had a strong affinity with oxidizable phase and Pb varied from site to site. The SEM/AVS ratio was less than one in these sediments and results implied that the majority of Zn and Ni （〉 40%） were bound to AVS. In contrast, Pb, Cu and Cd were little bound to AVS due to their low ration of SEM-Pb, Cu, Cd to corresponding total concentration and relatively high Dorewater concentration.

The distribution and occurrence of mercury in Chinese coals

Mercury is one of the most concerned hazardous elements in coals. 1018 coal samples of different coal-forming periods, coal-accumulating areas and coal ranks all over the country were collected to study the distributions of mercury in Chinese coals. The modes of occurrence of mercury were studied with float-sink experiments of 10 coals from different basins in China and correlation analyses were conducted between concentrations of mercury and maceral and sulfur contents, as well as the ash yield. The theoretic concentrations and affinities of mercury in vitrinite, inertinite, clay and pyrite were then calculated following the methods proposed by Solari. The weighted average concentration of mercury in Chinese coals is 0.154 ~tg/g, which is similar to that in the word coals in general. The mercury concentrations vary largely in the coals of different coal-forming period and coal-accumulating areas as geological settings play key roles in deter- mining the geochemistry of mercury. The concentrations of mercury in coals from south and southwest China and those from North China of C3-P1 are relatively higher while those from North China of Jm-a and Northeast of J3-K1 relatively lower. The general distribution trends of mercury are very similar to that of ash yield, sulfur contents in coals. Pyrite is the dominant carrier of mercury in most coals, especially in some high-sulfur coals with abundant epigenetic pyrite formed during diagenesis and metamorphism. Mercury has higher affinity to vitrinite than to inertinite in most coals, which accords with the geological origin of macerals and geochemistry of mercury.

Fractal kinetic characteristics for dissolving and leaching processes of strontium residue

The pore structural characteristics of strontium residue were studied with the N2 adsorption method(ASAP2010).The kinetic properties concerning dissolving and leaching strontium waste were described by determining the concentrations of Sr2+,Ba2+ and soluble sulphides in solutions.The results showed that the specific surface area and pore volume increased with decreasing granule diameter,and the micropore surface of the residue was fractal.In the dissolving and leaching processes of strontium residue,soluble ion concentrations increased with decreasing granule diameter of the residue,and the reaction dimension was lower than the fractal dimension of pore surface.Sr2+ and soluble sulphide concentrations significantly exceeded the defined standard values,while Ba2+ concentrations did not,either in the dissolving or leaching solutions.In addition,dissolving and leaching reactions selectively occurred on the micropore surface of strontium residue.

Treatment of Wastewater Containing Polyacrylamide Using Three Dimensional Electrodes

A method using three-dimensional electrode is applied to treat wastewater in oil fields, which contains polyacrylamide （PAM）, for analogue. A best condition for electrolysis （I= 1.0 A, t=90 min, c=0.1%, m=980 g,φ=5 mm, d=5.0 cm） has been determined, under which the COD removal efficiency reached 96.0%, COD containing in wastewater reduced to 64.3 mg/L from 1 622.9 mg/L, the figure before treatment. Three categories of PAM-containing wastewater in production practice have been treated with the COD removal ratios being 87.5%, 82.4% and 84.7% respectively. Presence of H2O2 and ·OH are detected by means of Ti（IV）-5-Br-PADAP technique and colorimetry respectively. The concentration is positively proportional to the COD removal ratio and increases in accordance with increment of time of electrolysis and current.

Distribution and occurrence of trace elements in the No.14 coal from the Huolinhe mine

Optical microscopy, and scanning electron microscopy in conjunction with energy dispersed X-ray spectrometry （SEM-EDX）, have been used to study the minerals and the concentrations of 12 trace elements in the No.14 coal from the Huolinhe mine, Inner Mongolia China. The distribution, affinity and removability of the trace elements were studied by float-sink experiments and petrological methods. A high mineral content, dominated by clay minerals, was found in the No.14 coal from the Huolinhe mine. The concentrations of As, Sb and Hg are relatively high compared to the average values for Chinese coals. As, Cr, Hg, Li, Mn, Pb are mainly associated with the minerals while Cd, Co, Ni, Sb, and Se are evenly distributed between the minerals and the organic matter. Be and Ba are mainly distributed in the minerals with a minor proportion in the organic matter. Most elements have a low organic affinity, although Sb, Se, Co, Cd, Ni are closely integrated with the organic matter. High theoretical removabilities are indicated for most trace elements. So it may be possible to lower the concentrations of trace elements during coal preparation.

Synthesis and Ionic Conduction of Cation-deficient Apatite La9.33-2x/3MxSi6O26 Doped with Mg, Ca, Sr

Apatite-type lanthanum silicate with special conduction mechanism via interstitial oxygen has attracted considerable interest in recent years. In this work, pure powder of La9.33 2x/3MxSi6O26 （M=Mg, Ca, Sr） is prepared by the sol-gel method with sintering at 1000℃. The powder is characterized by X-ray diffraction （XRD） and scanning electron micrograph （SEM）. The apatite can be obtained at relatively low temperature as compared to the conventional solid-state reaction method. The measurements of conductivity of a series of doped samples La9.33-2x/3MxSi6O26 （M=Ca, Mg, Sr） indicate that the type of dopant and the amount have a significant effect on the conductivity. The greatest decrease in conductivity is observed for Mg doping, following the Ca and the Sr doped apatites. The effect is ultimately attributed to the amount of oxygen interstitials, which is affected by the crystal lattice distortion arising from cation vacancies.

Hydrothermal Synthesis and Crystal Structure of a Novel Hexanuclear Copper(Ⅱ) Complex:[Cu_6(DPPZ)_4(btc)_4(H_2O)_8]·5H_2O

A new hexanuclear copper（Ⅱ） complex,[Cu 6 （DPPZ） 4 （btc） 4 （H 2 O） 8 ]·5H 2 O （1,DPPZ=dipyrido[3,2-a：2,3-c]phenazine,H 3 btc=1,3,5-benzenetricarboxylic acid）,has been hydrothermally synthesized and structurally characterized by X-ray single-crystal diffraction,elemental analyses,IR,and thermogravimetric analysis.Its crystal structure is of triclinic system,space group P1 with a=12.489（4）,b=14.234（5）,c=14.484（5）,α=82.848（4）,β=79.399（4）,γ=73.646（4）°,V=2421.2（13） 3,Z=1,Cu 6 C 108 H 78 N 16 O 37,M r=2573.17,D c=1.752 g/cm 3,μ=1.398 mm-1,F（000）=1308,GOOF=1.011,the final R=0.0495 and wR=0.1030 for 5420 observed reflections with I 2σ（Ⅰ）.In 1,four btc 3ligands act as bridges between six neighboring Cu atoms to form an unusual hexanuclear copper cluster.The clusters are further connected by two types of O-H···O and O-H···N hydrogen bonds,generating a three-dimensional supramolecular structure.In addition,intermolecular and intramolecular π-π stacking interactions further consolidate the three-dimensional supramolecular framework of 1.

Decolorization of Anthraquinone dye by Rhodopseudomonas XL-1

Rhodopseudomonas XL 1 gained from textile wastewater can effectively decolorize anthraquinone dye. Under anaerobic condition, 93 percent of the anthraquinone dye is decolorized , which is higher than that under aerobic condition. The optimum pH is 6～9 and the optimum temperature is 20～40℃ for the anthraquinone dye decolorization by XL 1 . XL 1 can not decolorize the anthraquinone dye when it is the sole carbon source. Microbial cometabolism and decolorization of the dye take place in the presence of some other carbon source(0.2～0.4g/100ml)called cometabolic substrate. The cometabolic substrate can be peptone, glucose, sodium acetate, beef extract, amylum, etc. The change of molecular structure of the dye before and after decolorized by XL 1 is studied by UV Vis absorption spectrum. The results indicate that its molecular structure is changed evidently.

Synthesis, Crystal Structure and Theoretical Calculation of a Novel 2D Network of Manganese(Ⅱ) Complex

A novel complex, [Mn（2-NCP）（H2BTC）（H2O）]n（1, 1,3,5-H3BTC = 1,3,5-benzenetricarboxylic acid, 2-HNCP = 2-（2-carboxyphenyl）-1 H-imidazo（4,5-f）-（1,10）phenanthroline）, was hydrothermally synthesized and structurally characterized by elemental analysis, IR, XRD and single-crystal X-ray diffraction. Structural analyses reveal that complex 1 exhibits a（6, 6）-connected topology network with a Schl?fli symbol of（63）. The adjacent 2 D layers are further stacked via strong hydrogen-bonding interactions, giving a 3 D supramolecular framework. In addition, the structure of complex 1 was calculated by the B3LYP/LANL2 DZ method by Gaussian program. The results from natural bond orbital（NBO） analysis shows obvious covalent interaction between the coordinated atoms and Mn（Ⅱ） ion.

Bacteria Adherence Properties of Nitrided Layer on Ti6Al4V by the Plasma Nitriding Technique

The nitrided layer on Ti6A14V substrate was prepared by the plasma nitriding technique. The sample was characterized by X-ray diffraction （XRD）, glow discharge optical emission spectroscopy （GDOES）, X-ray photoelectron spectroscopy （XPS）, and rough-meter. X- ray diffraction analysis reveals that TiN, Ti2N and Ti phase exist in the nitrided layer subsurface. GDOES analysis shows the thickness of the nitrided layer is about 3 ~tm. XPS analysis shows that there is higher N, lower A1 and lower V in the nitrided layer surface than in the Ti6A14V surface. Rough-meter analysis results show the roughness of the nitrided layer is greater than that of Ti6A14V alloy base. The bacteria adherence property of the nitrided layer on Ti6A14V substrate on the Streptococcus mutans was investigated and compared with that of Ti6A14V alloy by fluorescence microscope. It shows that the nitrided layer inhibits the bacteria adherence.

Identification and Characterization of a Novel Alkali-and High Temperature-Tolerant Lipase(Lip4346)from a Macroalgae-Associated Bacterial Strain

A novel lipase gene(lip4346)encoding a primary translation product with 176 amino acids was screened from the genome fine mapping of the macroalgae-associated bacterial strain Microbulbifer sp.YNDZ01.Macroalgae were collected from the coast of the Halmahera Island of Indonesia.The lip4346 gene was cloned and heterologously expressed in Escherichia coli.The purified recombinant Lip4346 protein had a molecular mass of 19 k Da,a single band on sodium dodecyl sulfate-polyacrylamide gel electrophoresis(SDS-PAGE),and a maximum enzyme activity of 31.2 U m L-1.The optimal temperature and pH for the lipase activity of Lip4346 were 70℃and 10.0,respectively.Lip4346 was tolerant with a number of organic solvents and detergents,and was active toward triacylglycerols and p-nitrophenyl esters with short-and medium-chain lengths.The unique characteristics of Lip4346 indicate that it is a promising nonaqueous biocatalyst for industrial applications.

Effect of hydrological variability on diatom distribution in Poyang Lake, China

Poyang Lake is the largest freshwater lake in China, and it has a seasonal flooding cycle that significantly changes the water level every year. The aim of this paper was to explain how these hydrological changes influence diatom populations in Poyang Lake. The yearly hydrological cycle can be divided into 4 phases: low water-level phase, increasing water-level phase, high water-level phase and decreasing waterlevel phase. Variations in the abundance of planktonic diatoms were studied using quarterly monitoring data collected from January 2009 to October 2013. Generally, diatoms were dominant in Poyang Lake and accounted for more than 50% of the total phytoplankton biomass except in July 2009(26%) and January 2012(35%). Aulacoseira granulata and Surirella robusta were the predominant species in all four phases, and they accounted for 25.02% to 56.89% and 5.07% to 14.78% of the total phytoplankton biomass, respectively. A redundancy analysis(RDA) showed that changes in physico-chemical parameter were related to the water level, and changes in diatom biomass were related to nitrite levels and p H. These results indicate that changes in environmental parameters related to both seasonal variations and water-level fluctuations caused variations in diatom biomass and community composition in Poyang Lake. Furthermore, extreme hydrological events can have different influences on the diatom community composition in the main channel and lentic regions. This research provides data on the diatom variations in Poyang Lake and will be useful for establishing biological indicators of environmental change and protecting Poyang Lake in the future.

Syntheses, Crystal Structures, and Magnetic Properties of Mn(Ⅱ) and Co(Ⅱ) Coordination Polymers Constructed from Pyridine-tricarboxylate Ligand

Two coordination polymers, namely {[Mn（HL_1）（phen）]·4H_2O}_n（1） and [Co_2（HL_2）_2（H_2O）_2]_n（2） have been constructed hydrothermally using H_3L_1 and H_3L_2（H_3L_1 = 2-（5-carboxypyridin-2-yl）terephthalic acid, H_3L_2 = 2-（4-carboxypyridin-3-yl）terephthalic acid）, phen, MnCl_2×4H_2O and CoCl_2×6H_2O. The products were isolated as stable crystalline solids and were characterized by IR spectroscopy, elemental, thermogravimetric（TGA）, powder（PXRD） and single-crystal X-ray diffraction analyses. Compound 1 features a 3D framework structure, which was topologically classified as a trinodal 4,6,6-connected net with the unique topology defined by the point symbol of（3^（10）.5.6~4）4（3^（10）.6.7~4）2（5.6~2.8~2.9）. Compound 2 possesses a 2D metal-organic layer, which was topologically classified as a binodal 4,4-connected layer defined by the point symbol of（4~3.6~2.8）. The layers are further extended into a 3D supramolecular framework via hydrogen bonds. The magnetic properties for both compounds were also investigated, indicating antiferromagnetic interactions between the adjacent metal ions.

Hydrothermal Formation of Lath-Shaped Trioctahedral Smectite with High Crystallinity

Lath-shaped and highly crystalline trioctahedral smectites were synthesized under hydrothermal conditions. The quenched glasses with stoichiometrically dehydrated Na-smectite compositions were treated at （a） 500℃ and 100 MPa for 1 and 11 days; and （b） 300℃ and 100 MPa for 7 days. The crystallinity and particle size of products were dependent on the chemical composition of the starting glass, synthetic temperature and duration of hydrothermal treatment. The high structural ordering and large dimensions of the products were confirmed from the sharpness of XRD peaks; and hydration behavior under controlled relative humidity. Transmission electron microscopy was also performed for the characterization of the particle size of product. Particle sizes vary from ca. 10 nm to a few pm by changing the chemical compositions of the starting materials. The product with the highest structural ordering and largest dimension was obtained from Nao.33（Mg1.83Al0.67）Si4O11 glass treated at 500℃ and 100 MPa for 1 day. The obtained results also confirmed the metastability and compositional dependency in the formation of highly crystalline trioctahedral smectite at hydrothermal conditions.

Spatial and Temporal Distributions of Soil Organic Matter in the Mixed Plantations of Alder and Cypress in the Hilly Areas of Central Sichuan Basin

The investigation was conducted on the spatial and temporal distributions of soil organic mater （SOM） in the mixed plantations of alder （Aluns crernastogyne） and cypress （Cupressus funebris ） （MPAC）, which distributed in the hilly areas of central Sichuan Basin （HACSB）. The results show that： （1） the spatial distribution of SOM among different sites at the same age are not significant before 15-year-old, but significant at 20-year-old, and not significant again after 25-year-old; （2） the SOM contents in 0-15 cm and 15-30 cm layers increase sharply from 10- to 15-year-old, and decline gradually from 15- to 30- year-old; the SOM contents of the 30-year-old PCP were 80. 38% and 78.42% higher than that of the 10-year-old, but 29.16% and 53.37% lower than that of 15-year-old in the 0-15 cm and 15-30 cm layers, respectively. The decrease of SOM contents would lead to the degradation of soil fertility and the decline of forest productivity.

Application of Plastic Wood Composite in Outdoor Furniture

Concept of plastic wood and plastic wood furniture was summarized, categories of outdoor furniture in a narrow and broad sense introduced respectively. Furniture of plastic wood composite is characterized by "leisure, natural and concise", dynamic loading is the major connection mode, and traditional mechanical connection is applied. Common damages of plastic wood composite and countermeasures were concluded, and corresponding resolutions proposed in view of existing problems of outdoor plastic wood composite furniture.

PREPARATION AND PROPERTIES OF EXTRACELLULAR BIOPOLYMER FLOCCULANT

The biopolymer flocculant （named PS-2） producing by Pseudomonas fluorescens was investigated. The PS-2 had high efficiency with small dosage, when dealing with kaolin suspension, formed larger floc, with big sedimentation rate, over a wide range of temperatures. Distributing of flocculating activity test showed that the biopolymer flocculant was an extracellular product. The composition analysis of purified biopolymer flocculant showed that it composed mainly of polysaccharide and nucleic acid. The content of polysaccharide was 86. 7%, which determined by using phenol-vitriol method, and the content of nucleic acid was 7.8%, which determined by UV absorption method. The biopolymer flocculant as a powder form showed much better stability than that as a supernatant. The character of biopolymer flocculant was stable even it was heated to 100℃ when it in acidic condition. The optimal conditions to flocculate kaolin suspension were as follows： pH 8-12, flocculant dosage lmL/L, and Ca^2＋ as the optimal cation.

Prospects of obtaining carrageenase from Polar microorganisms

The author summarized the physiological activity of carrageenan,——antioxidant,antiviral and anti coagulation.The article compared and analysed three methods of decomposing carrageenan to carrageenan oligosaccharides.And it emphatically pointed out that biological enzyme method is better than chemical method and physical method on degradation of carrageenan and its good application prospect.?In addition,the article clarified the possibility of obtaining new carrageenase from Polar microorganisms from the special biological environment,the microorganisms’special physical and chemical characteristics and so on.In order to provide reference for the search of the industrial production of carrageenan oligosaccharides by enzymatic degradation.

Current Situation Analysis and Suggestions for Solid Waste Management Practices among Households in Freetown

Freetown which is the capital city of Sierra Leone is facing challenges with population growth, urbanization, and industrialization, leading to an increase in municipal solid waste (MSW) generation. The study aims to evaluate MSW generation, composition, and disposal methods, as well as the impact of collection fees, policy implementation, and women’s participation in municipal solid waste management (MSWM). The study used both qualitative and quantitative methods for data collection and analysis. The study administered 393 structured questionnaires in three selected sections to collect data on variables such as family size, education, level of knowledge, etc. The study used door-to-door data collection to determine the rate of solid waste generation, composition, and disposal in 66 households from two of the selected sections and 34 households from the other section to evaluate the current situation of MSWM practices among households in Freetown. The study used a descriptive statistic to analyze the data collected using Origin-Pro9 and MS Excel software. The findings showed that with a 4.2% urban growth rate, Freetown had a population of 1,467,543 in 2023, generating 851 tons of MSW per day, with organic waste accounting for 78% of the total MSW generated. Plastic waste generation also increased from 7.6% in 2020 to 13% in 2023. The study emphasizes the need to sustain the MSWM system by prioritizing solid waste collection fees, policy enforcement, and women’s participation in the MSWM sector. It further suggests and provides recommendations for developing an efficient and sustainable MSWM system in Sierra Leone, including knowledge transfer from countries like China and the US.