This paper presents an experimental study of the characterisation of local materials used in the construction and thermal insulation of buildings. These materials are compressed earth bricks stabilised with cement and...This paper presents an experimental study of the characterisation of local materials used in the construction and thermal insulation of buildings. These materials are compressed earth bricks stabilised with cement and sawdust. The thermal conductivity, diffusivity, effusivity, and specific heat of earth-based materials containing cement or sawdust have been determined. The results show that the blocks with earth + sawdust are better thermal insulators than the blocks with simple earth. We observe an improvement in thermal efficiency depending on the presence of sawdust or cement stabilisers. For cement stabilisation, the thermal conductivity increases (λ: 1.04 to 1.36 W·m<sup>-1</sup>·K<sup>-1</sup>), the diffusivity increases (from 4.32 × 10<sup>-7</sup> to 9.82 × 10<sup>-7</sup> m<sup>2</sup>·s<sup>-1</sup>), and the effusivity decreases (1404 - 1096 J·m<sup>-2</sup>·K<sup>-1</sup>·s<sup>-1/2</sup>). For sawdust stabilisation, the thermal conductivity decreases (λ: 1.04 to 0.64 W·m<sup>-1</sup>·K<sup>-1</sup>), the diffusivity increases (from 4.32 × 10<sup>-7</sup> to 5.9 × 10<sup>-7</sup> m<sup>2</sup>·s<sup>-1</sup>), and the effusivity decreases (1404 - 906 J·m<sup>-2</sup>·K<sup>-1</sup>·s<sup>-1/2</sup>). Improving the structural and thermal efficiency of BTC via stabilisation with derived binders or cement is beneficial for the load-bearing capacity and thermal performance of buildings.展开更多
文摘This paper presents an experimental study of the characterisation of local materials used in the construction and thermal insulation of buildings. These materials are compressed earth bricks stabilised with cement and sawdust. The thermal conductivity, diffusivity, effusivity, and specific heat of earth-based materials containing cement or sawdust have been determined. The results show that the blocks with earth + sawdust are better thermal insulators than the blocks with simple earth. We observe an improvement in thermal efficiency depending on the presence of sawdust or cement stabilisers. For cement stabilisation, the thermal conductivity increases (λ: 1.04 to 1.36 W·m<sup>-1</sup>·K<sup>-1</sup>), the diffusivity increases (from 4.32 × 10<sup>-7</sup> to 9.82 × 10<sup>-7</sup> m<sup>2</sup>·s<sup>-1</sup>), and the effusivity decreases (1404 - 1096 J·m<sup>-2</sup>·K<sup>-1</sup>·s<sup>-1/2</sup>). For sawdust stabilisation, the thermal conductivity decreases (λ: 1.04 to 0.64 W·m<sup>-1</sup>·K<sup>-1</sup>), the diffusivity increases (from 4.32 × 10<sup>-7</sup> to 5.9 × 10<sup>-7</sup> m<sup>2</sup>·s<sup>-1</sup>), and the effusivity decreases (1404 - 906 J·m<sup>-2</sup>·K<sup>-1</sup>·s<sup>-1/2</sup>). Improving the structural and thermal efficiency of BTC via stabilisation with derived binders or cement is beneficial for the load-bearing capacity and thermal performance of buildings.