Chitosan Nanoparticles as Biostimulant in Lettuce (Lactuca sativa L.) Plants

Biodegradable nanoparticles such as chitosan nanoparticles (CSNPs) are used in sustainable agriculture since theyavoid damage to the environment;CSNPs have positive effects such as the accumulation of bioactive compoundsand increased productivity in plants. This study aimed to investigate the impact of applying CSNPs on lettuce,specifically focusing on enzymatic activity, bioactive compounds, and yield. The trial was conducted using a completelyrandomized design, incorporating CSNPs: 0, 0.05, 0.1, 0.2, 0.4, and 0.8 mg mL−1. The doses of 0.4 mg mL−1improve yields up to 24.6% increases and 0.1 mg mL−1 of CSNPs increases total phenols by 31.2% and antioxidantcapacity by 34.6%. In addition, when low concentrations of CSNPs (0.05 and 0.1 mg L−1) were applied, anincrease in catalase was determined. The CSNPs represent a good alternative to be used as a biostimulant in sustainableagriculture because they improve the yield and quality of lettuce by increasing the bioactive compounds.

Application of a Mathematical Model to the Sierra Indiana Ore Leaching Process Containing Thorium, by Means of H₂SO₄Solution and HCl

The existence of the thorium element in the ores from the Atacama region, Chile, and its importance in the activities of the nuclear industry, have generated the interest of the Chilean Nuclear Energy Commission (CChEN) to study the technical feasibility of its recovery, like ThO2 through the implementation of hydrometallurgical techniques, such as leaching, solvent extraction, among others. The present work has become a report about the research carried out in the Extractive Metallurgy Area of the Department of Advanced Materials of CChEN, whose objective is to know the behavior of the thorium element when the mineral carrier is leached. The leaching tests were carried out in a glass reactor in batch mode, by mechanical agitation, varying different operational parameters, such as: type of leaching solution, concentration of acid in the solution, system temperature and granulometry of the mineral. The results indicate that there is technical feasibility for the recovery of thorium by leaching the mineral carrier with hydrochloric and/or sulfuric solution. The highest recovery of thorium for a sulfuric solution was 70.0% and for a hydrochloric solution of 83.8%, so the process presents a good efficiency in both cases. For a hydrochloric solution, the mathematical model of the thorium recovery efficiency obtained is: Y=31.14+26.25*X1+8.69*X2−0.82*X3+9.5*X12−0.83*X13−3.71*X23−1.83*X123+6.45 The concentration of HCl and temperature, as well as their interaction, significantly affect the recovery of thorium for Sierra Indiana mineral, as well as temperature and granulometry. The previous model gives a good representativeness of 99.98%. For a sulfuric solution, the mathematical model of the thorium recovery efficiency obtained is: Y=29.78+25.92*X1+0.99*X2−1.05*X3−2.05*X12−9.84*X13−5.26*X23−3.87*X123+15.18 The model indicates that the recovery of thorium for the mineral is significantly affected by the concentration of sulfuric acid, and to a lesser degree by the temperature and granulometry. The model provides a representativeness of 98.3%.

Impact of ZnSO_(4)^(-)and ZnO Nanoparticles on Seed Germination and Seedling Growth of Lettuce

Micronutrient nanoparticles(NPs)are currently an option for chemical fertilization and biostimulation in crops.However,there is little information on the phytotoxic or biostimulatory effects of NPs at low concentrations of some elements,such as Zn.In this study,the effect of low concentrations of Zn oxide(ZnO)NPs on germination,growth variables,and nutritional attributes of lettuce(Lactuca sativa L.)was evaluated in comparison to Zn sulfate.Romaine lettuce seeds were treated with ZnSO_(4)^(-)×7H_(2)O and ZnO NPs at Zn molar concentrations of 1×10^(−3),5×10^(−3),1×10^(−4),5×10^(−4),1×10^(−5),5×10^(−5),1×10^(−6),and 5×10^(−6).The seeds treated with ZnSO4−at 5×10^(−6)registered the highest radicle length,73%more than the control treatment.The seeds treated with ZnSO4−at 5×10^(−3)registered the lowest values,with 50%less than the control treatment.ZnO NPs at 5×10^(−6)significantly increased content of chlorophyll A and B and total phenolics.These results indicate the possible existence of a mechanism related to the intrinsic nanoparticle properties,especially at low concentrations.

Construction of a Potentiostat to Perform Electrochemical Impedance Spectroscopy (EIS) Tests

In this work, it was developed the construction of a potentiostat for the execution of Electrochemical Impedance Spectroscopy (EIS) experiments, using an Agilent 33220a signal generator, a RIGOL 1064b oscilloscope and a protoboard for the connection of operational amplifiers to an electrochemical cell. The coordination of the global operation, in addition to data acquisition, was performed using a code generated in the LabVIEW program. The system analyzed was the corrosion of an 1100 aluminum plate in water, in order to compare the results obtained by other authors. The data acquisition consisted in obtaining the values of amplitude, RMS voltage and phase angle between the generated power signals and the current output, in order to obtain the impedance of the system, for different signal frequencies. Finally, the values obtained were plotted on a Nyquist diagram. In this way, the objective of this article is to demonstrate that with conventional laboratory equipment it is possible to implement an experimental device, capable of delivering results similar to those obtained by commercial equipment.

Smart Polymers and Coatings Obtained by Ionizing Radiation: Synthesis and Biomedical Applications

Gamma radiation has been shown particularly useful for the functionalization of surfaces with stimuli-responsive polymers. This method involves the formation of active sites (free radicals) onto the polymeric backbone as a result of the exposition to high-energy radiation, in which a proper microenvironment for the reaction among monomer and/or polymer and the active sites takes place, thus leading to propagation which forms side chain grafts. The modification of polymers using high-energy irradiation may be performed by the following methods: direct or simultaneous, pre-irradiation oxidative and pre-irradiation. The most frequent ones correspond to the pre-irradiation oxidative method and the direct one. Radiation-grafting has many advantages over conventional methods considering that it does not require catalyst nor additives to initiate the reaction, and in general, no changes on the mechanical properties with respect to the pristine polymeric matrix are observed. This chapter focused on the synthesis of smart polymers and coatings obtained by the use of gamma radiation. In addition, diverse applications of these materials in the biomedical field are also reported.