Incorporation of higher content Si anode material beyond 5 wt% to Li-ion batteries(LIBs)is challenging,owing to large volume change,swelling,and solid electrolyte interphase(SEI)instability issues.Herein,a strategy of...Incorporation of higher content Si anode material beyond 5 wt% to Li-ion batteries(LIBs)is challenging,owing to large volume change,swelling,and solid electrolyte interphase(SEI)instability issues.Herein,a strategy of diacetoxydimethylsilane(DAMS)additive-directed SEI stabilization is proposed for a stable operation of Si-0.33FeSi_(2)(named as Si-Fe)anode without graphite,which provides siloxane inorganics and organics enrichment that compensate insufficient passivation of fluoroethylene carbonate(FEC)additive and reduce a dependence on FEC.Unprecedented stable cycling performance of highly loaded(3.5 mA h cm^(-2))pure Si-Fe anode is achieved with 2 wt%DAMS combined with 9 wt%FEC additives under ambient pressure,yielding high capacity 1270 mA h g^(-1)at 0.5 C and significantly improved capacity retention of 81% after 100 cycles,whereas short circuit and rapid capacity fade occur with FEC only additive.DAMS-directed robust SEI layer dramatically suppresses swelling and particles crossover through separator,and therefore prevents short circuit,demonstrating a possible operation of pure Si or Sidominant anodes in the next-generation high-energy-density and safe LIBs.展开更多
Elevating the charge cut-off voltage beyond traditional 4.2 V is a commonly accepted technology to increase the energy density of Li-ion batteries(LIBs) but the risk of Li-dendrites and fire hazard increases as well. ...Elevating the charge cut-off voltage beyond traditional 4.2 V is a commonly accepted technology to increase the energy density of Li-ion batteries(LIBs) but the risk of Li-dendrites and fire hazard increases as well. The use of ambi-functional additive, which forms stable solid electrolyte interphase(SEI) simultaneously at both cathode and anode, is a key to enabling a dendrites-free and well-working high-voltage LIB. Herein, a novel ambi-functional additive, pentaerythritol disulfate(PEDS), at 1 wt% without any other additive is demonstrated. We show the feasibility and high impacts of PEDS in forming lithium sulfateincorporated robust SEI layers at NCM523 cathode and graphite anode in 1 Ah-level pouch cell under4.4 V, 25 °C and 0.1 C rate, which mitigates the high-voltage instability, metal-dissolution and cracks on NCM523 particles, and prevents Li-dendrites at graphite anode. Improved capacity retention of 83%after 300 cycles is thereby achieved, with respect to 69% with base electrolyte, offering a promising path toward the design of practical high-energy LIBs.展开更多
基金supported by the National Research Foundation grants funded by the Ministry of Science and ICT of Korea(2021M3H4A3A02086211 and RS-2023-00217581).
文摘Incorporation of higher content Si anode material beyond 5 wt% to Li-ion batteries(LIBs)is challenging,owing to large volume change,swelling,and solid electrolyte interphase(SEI)instability issues.Herein,a strategy of diacetoxydimethylsilane(DAMS)additive-directed SEI stabilization is proposed for a stable operation of Si-0.33FeSi_(2)(named as Si-Fe)anode without graphite,which provides siloxane inorganics and organics enrichment that compensate insufficient passivation of fluoroethylene carbonate(FEC)additive and reduce a dependence on FEC.Unprecedented stable cycling performance of highly loaded(3.5 mA h cm^(-2))pure Si-Fe anode is achieved with 2 wt%DAMS combined with 9 wt%FEC additives under ambient pressure,yielding high capacity 1270 mA h g^(-1)at 0.5 C and significantly improved capacity retention of 81% after 100 cycles,whereas short circuit and rapid capacity fade occur with FEC only additive.DAMS-directed robust SEI layer dramatically suppresses swelling and particles crossover through separator,and therefore prevents short circuit,demonstrating a possible operation of pure Si or Sidominant anodes in the next-generation high-energy-density and safe LIBs.
基金supported by the Ministry of Trade,Industry&Energy (A0022-00725)National Research Foundation grant (No.2019R1A2C1084024 and 2021R1A2C2005764) funded by the Ministry of Science and ICT of Korea+2 种基金Chungnam National Universitysupported by the Nano Material Technology Development Program through the National Research Foundation of Koreafunded by the Ministry of Science and ICT of Korea (2009-0082580)。
文摘Elevating the charge cut-off voltage beyond traditional 4.2 V is a commonly accepted technology to increase the energy density of Li-ion batteries(LIBs) but the risk of Li-dendrites and fire hazard increases as well. The use of ambi-functional additive, which forms stable solid electrolyte interphase(SEI) simultaneously at both cathode and anode, is a key to enabling a dendrites-free and well-working high-voltage LIB. Herein, a novel ambi-functional additive, pentaerythritol disulfate(PEDS), at 1 wt% without any other additive is demonstrated. We show the feasibility and high impacts of PEDS in forming lithium sulfateincorporated robust SEI layers at NCM523 cathode and graphite anode in 1 Ah-level pouch cell under4.4 V, 25 °C and 0.1 C rate, which mitigates the high-voltage instability, metal-dissolution and cracks on NCM523 particles, and prevents Li-dendrites at graphite anode. Improved capacity retention of 83%after 300 cycles is thereby achieved, with respect to 69% with base electrolyte, offering a promising path toward the design of practical high-energy LIBs.
