Modification of streamer-to-leader transition model based on radial thermal expansion in the sphere-plane gap discharge at high altitude

Historically,streamer-to-leader transition studies mainly focused on the rod-plane gap and low altitude analysis,with limited attention paid to the sphere-plane gap at high altitude analysis.In this work,sphere-plane gap discharge tests were carried out under the gap distance of 5 m at the Qinghai Ultra High Voltage(UHV)test base at an altitude of 2200 m.The experiments measured the physical parameters such as the discharge current,electric field intensity and instantaneous optical power.The duration of the dark period and the critical charge of streamer-toleader transition were obtained at high altitude.Based on radial thermal expansion of the streamer stem,we established a modified streamer-to-leader transition model of the sphere-plane gap discharge at high altitude,and calculated the stem temperature,stem radii and the duration of streamer-to-leader transition.Compared with the measured duration of sphere-plane electrode discharge at an altitude of 2200 m,the error rate of the modified model was 0.94%,while the classical model was 6.97%,demonstrating the effectiveness of the modified model.From the comparisons and analysis,several suggestions are proposed to improve the numerical model for further quantitative investigations of the leader inception.

Study and optimal simulation of 4H-SiC floating junction Schottky barrier diodes' structures and electric properties

This paper stuides the structures of 4H SiC floating junction Schottky barrier diodes. Some structure parameters of devices are optimized with commercial simulator based on forward and reverse electrical characteristics. Compared with conventional power Schottky barrier diodes, the devices are featured by highly doped drift region and embedded floating junction layers, which can ensure high breakdown voltage while keeping lower specific on-state resistance, and solve the contradiction between forward voltage drop and breakdown voltage. The simulation results show that with optimized structure parameter, the breakdown voltage can reach 4.36 kV and the specific on-resistance is 5.8 mΩ.cm2 when the Baliga figure of merit value of 13.1 GW/cm2 is achieved.

Analysis of Hybrid Rechargeable Energy Storage Systems in Series Plug-In Hybrid Electric Vehicles Based on Simulations

In this paper, an extended analysis of the performance of different hybrid Rechargeable Energy Storage Systems (RESS) for use in Plug-in Hybrid Electric Vehicle (PHEV) with a series drivetrain topology is analyzed, based on simulations with three different driving cycles. The investigated hybrid energy storage topologies are an energy optimized lithium-ion battery (HE) in combination with an Electrical Double-Layer Capacitor (EDLC) system, in combination with a power optimized lithium-ion battery (HP) system or in combination with a Lithium-ion Capacitor (LiCap) system, that act as a Peak Power System. From the simulation results it was observed that hybridization of the HE lithium-ion based energy storage system resulted from the three topologies in an increased overall energy efficiency of the RESS, in an extended all electric range of the PHEV and in a reduced average current through the HE battery. The lowest consumption during the three driving cycles was obtained for the HE-LiCap topology, where fuel savings of respectively 6.0%, 10.3% and 6.8% compared with the battery stand-alone system were achieved. The largest extension of the range was achieved for the HE-HP configuration (17% based on FTP-75 driving cycle). HP batteries however have a large internal resistance in comparison to EDLC and LiCap systems, which resulted in a reduced overall energy efficiency of the hybrid RESS. Additionally, it was observed that the HP and LiCap systems both offer significant benefits for the integration of a peak power system in the drivetrain of a Plug-in Hybrid Electric Vehicle due to their low volume and weight in comparison to that of the EDLC system.

Optimization of a Single Flash Geothermal Power Plant Powered by a Trans-Critical Carbon Dioxide Cycle Using Genetic Algorithm and Nelder-Mead Simplex Method

The usage of renewable energies,including geothermal energy,is expanding rapidly worldwide.The low efficiency of geothermal cycles has consistently highlighted the importance of recovering heat loss for these cycles.This paper proposes a combined power generation cycle(single flash geothermal cycle with trans-critical CO_(2) cycle)and simulates in the EES(Engineering Equation Solver)software.The results show that the design parameters of the proposed system are significantly improved compared to the BASIC single flash cycle.Then,the proposed approach is optimized using the genetic algorithm and the Nelder-Mead Simplex method.Separator pressure,steam turbine output pressure,and CO_(2) turbine inlet pressure are three assumed variable parameters,and exergy efficiency is the target parameter.In the default operating mode,the system exergy efficiency was 32%,increasing to 39%using the genetic algorithm and 37%using the Nelder-Mead method.

Research on Active and Reactive Power Decoupling Control Based on VSC-HVDC

Voltage Source Converter-based High Voltage Direct Current(VSC-HVDC)transmission technology represents a groundbreaking approach in high voltage Direct Current(DC)transmission,offering numerous technical advantages and broad application prospects.However,in the d-q synchronous rotating coordinate system,the VSC-HVDC exhibits the coupling effect of active power and reactive power,so it needs to be decoupled.This paper introduces the basic principle and mathematical model of the VSC-HVDC transmission system.Through the combination of coordinate transformation and variable substitution,a feedforward decoupling control method is derived.Then the VSC-HVDC simulation model is designed,and the simulation analysis is carried out in the MATLAB environment.The simulation results demonstrate that the method effectively achieves decoupling control of active and reactive power,exhibiting superior dynamic performance and robustness.These findings validate the correctness and effectiveness of the control strategy.

Monte-Carlo simulation of pinhole collimator of a small field of view gamma camera for small animal imaging

Needs in scintimammography applications,especially for small animal cardiac imaging,lead to develop a small field of view,high spatial resolution gamma camera with a pinhole collimator.However the ideal pinhole collimator must keep a compromise between spatial resolution and sensitivity.In order to design a pinhole collimator with an optimized sensitivity and spatial resolution,the spatial resolution and the geometric sensitivity response as a function of the source to collimator distance has been obtained by means of Monte-Carlo simulation for a small field of view gamma camera with a pinhole collimator of various-hole diameters.The results show that the camera with pinhole of 1 mm,1.5 mm and 2 mm diameter has respectively spatial resolution of 1.5 mm,2.25 mm and 3 mm and geometric sensitivity of 0.016%,0.022%and 0.036%,while the source to collimator distance is 3 cm.We chose the pinhole collimator with hole diameter size of 1.2 mm for our the gamma camera designed based on the trade-off between sensitivity and resolution.

Safety Analysis of Liquid Rocket Engine Using Bayesian Networks

Safety analysis for liquid rocket engine has a great meaning for shortening development cycle, saving development expenditure and reducing development risk. The relationship between the structure and component of liquid rocket engine is much more complex, furthermore test data are absent in development phase. Thereby, the uncertainties exist in safety analysis for liquid rocket engine. A safety analysis model integrated with FMEA(failure mode and effect analysis) based on Bayesian networks (BN) is brought forward for liquid rocket engine, which can combine qualitative analysis with quantitative decision. The method has the advantages of fusing multi-information, saving sample amount and having high veracity. An example shows that the method is efficient.

Small-world networks of neuroblastoma cells cultured in three-dimensional polymeric scaffolds featuring multi-scale roughness

Understanding the mechanisms underlying cell-surface interaction is of fundamental importance for the rational design of scaffolds aiming at tissue engineering,tissue repair and neural regeneration applications.Here,we examined patterns of neuroblastoma cells cultured in three-dimensional polymeric scaffolds obtained by two-photon lithography.Because of the intrinsic resolution of the technique,the micrometric cylinders composing the scaffold have a lateral step size of^200 nm,a surface roughness of around 20 nm,and large values of fractal dimension approaching 2.7.We found that cells in the scaffold assemble into separate groups with many elements per group.After cell wiring,we found that resulting networks exhibit high clustering,small path lengths,and small-world characteristics.These values of the topological characteristics of the network can potentially enhance the quality,quantity and density of information transported in the network compared to equivalent random graphs of the same size.This is one of the first direct observations of cells developing into 3D small-world networks in an artificial matrix.

Control of soliton characteristics of the condensate by an arbitrary x-dependent external potential

This paper presents a family of soliton solutions of the one-dimensional nonlinear Schrodinger equation which describes the dynamics of the dark solitons in Bose-Einstein condensates with an arbitrary x-dependent external potential. The obtained results show that the external potential has an important effect on the dark soliton dynamical characteristics of the condensates. The amplitude, width, and velocity of the output soliton are relative to the source position of the external potential. The smaller the amplitude of the soliton is, the narrower its width is, and the slower the soiiton propagates. The collision of two dark solitons is nearly elastic .

Effect of interaction strength on gap solitons of Bose-Einstein condensates in optical lattices

We have developed a systematic analytical approach to the study on the dynamic properties of the linear and the nonlinear excitations for quasi-one-dimensional Bose-Einstein condensate trapped in optical lattices. A novel linear dispersion relation and an algebraic soliton solution of the condensate are derived analytically under consideration of Bose-Einstein condensate with a periodic potential. By analysing the soliton solution, we find that the interatomic interaction strength has an important effect on soliton dynamic properties of Bose-Einstein condensate.

Roller Profile Online Measurement Based on Ultrasonic Circulation Pulse-echo Technology

In order to meet the high precision requirement of wide steel strip in industry field, a novel online measurement of roller profile based on sonic circulation and pulse-echo technology was introduced. All kinds of the factors influencing the accuracy of roller profile online measurement were analyzed in detail and error compensation analysis of system was accordingly presented. In order to reduce count error, field program gate array(FPGA) was introduced and a highprecision data acquisition system was designed based on digital phase-shift technology. Experiments indicate that the standard deviation of measure data was 7.27 μm, which showed the feasibility and validity of the proposed method, and realized the roll profile measurement with high precision.

Synchronization and Parameters Identification of Chaotic Systems via Adaptive Control

Based on Lyapunov stability theory, a novel adaptive controller is designed for a class of chaotic systems .The parameters identification and synchronization of chaotic systems can be carried out simultaneously. The controller and the updating law of parameters identification are directly constructed by analytic formula. Simulation results with Chen’s system and R?ssler system show the effectiveness of the proposed controller.

Growth of GaN/AlxGa1-xN (x=0.65) Superlattices on Si(111) Substrates Using RF-MBE

Superlattices with varying GaN well widths (2, 3, 6, 9 nm) and fixed AlGaN barrier (8 nm) with high Al-content (x=0.65) were grown. Streaky RHEED patterns indicated 2D growth mode for the superlattices. XRD measurements showed multiple satellite peaks corresponding to uniform periodicity of the GaN/AlGaN pairs. The AlGaN barrier XRD peak also shifted with increasing well widths, while the GaN XRD peak was nominally unchanged. Room temperature photoluminescence experiments revealed peak emissions at energies lower than the bulk GaN energy gap. The large red shift with respect to the bulk gap is attributed to significant Stark effect for wide multiple quantum wells.

Frequency Dependence of Resonance Field of One-Dimensional Heisenberg Antiferromagnet KCuF3

The frequency dependence of the in-plane angular change of the antiferromagnetic resonance （AFMR） field of KCuF3 is systematically measured at frequencies ranging from 3.8 to 10.6 GHz at 4.2K. The effect of inequivalent g-tensors is found to gradually diminish with decreasing the frequency, and completely vanish when the frequency is decreased to the lower-frequency branch of C-band, while the effect of the effective anisotropy field is significantly enhanced with decreasing the frequency. The calculated AFMR field Hres based on the eight-sublattice model proposed by Yamada and Kato [J. Phys. Soc. Jpn. 63 （1994）289] is in good agreement with the experimental data.

Influences of Resistor-Type Superconducting Fault Current Limiter on Power System Transient Stability with Asymmetrical Short-Circuit Faults

The transient stability of a single machine to infinite-busbar power system with resistortype superconducting fault current limiters （SFCL） is analyzed under asymmetrical short-circuit fault conditions. The SFCL is considered to introduce a resistance into the three-phase circuits when faults occur. Based on the power-angle curves for different short-circuit conditions of the single-line to ground, double-line to ground and line to line short-circuit faults, the influences of the SFCLs on transient stability are analyzed in detail. The time-domain simulation of transient stability is carried out to verify the analytical results.

The role of hydrogen in hydrogenated microcrystalline silicon film and in deposition process with VHF-PECVD technique

The role of hydrogen in hydrogenated microcrystalline silicon （μc-Si：H） thin films in deposition processes with very high frequency plasma-enhanced chemical vapour deposition （VHF-PECVD） technique have been investigated in this paper. With in situ optical emission spectroscopy （OES） diagnosis during the fabrication of μc-Si：H thin films under different plasma excitation frequency Ve （60MHz-90MHz）, the characteristic peak intensities （IsiH＊, IHα＊ and IHβ＊ ） in SiH4＋H2 plasma and the ratio of （IHα＊ ＋ IHβ＊ ） to IsiH＊ were measured; all the characteristic peak intensities and the ratio （IHα＊ ＋ IHβ＊ ）/IsiH＊ are increased with plasma excitation frequency. It is identified that high plasma excitation frequency is favourable to promote the decomposition of SiH4＋H2 to produce atomic hydrogen and SiHx radicals. The influences of atomic hydrogen on structural properties and that of SiHx radicals on deposition rate of μc-Si：H thin films have been studied through Raman spectra and thickness measurements, respectively. It can be concluded that both the crystalline volume fraction and deposition rate are enhanced with the increase of plasma excitation frequency, which is in good accord with the OES results. By means of FTIR measurements, hydrogen contents of μc-Si：H thin films deposited at different plasma excitation frequency have been evaluated from the integrated intensity of wagging mode near 640 cm^-1. The hydrogen contents vary from 4% to 5%, which are much lower than those of μc-Si：H films deposited with RF-PECVD technique. This implies that μc-Si：H thin films deposited with VHF-PECVD technique usually have good stability under light-soaking.

Effect of a localized impurity on soliton dynamics in the Bose-Einstein condensates

By using a multiple-scale method, we analytically study the effect of a localized impurity on the soliton dynamics in the Bose-Einstein condensates. It is shown that a dark soliton can be transmitted through a repulsive （or attractive） impurity, while at the position of the localized impurity the soliton can be quasitrapped by the impurity. Additionally, we find that the strength of the localized impurity has an important effect on the dark soliton dynamics. With increasing strength of the localized impurity, the amplitude of the dark soliton becomes bigger, while its width is narrower, and the soliton propagates slower.

Early Stage of Pulsed Discharge in Water

The bubble radius at the early stage of discharge in water is investigated using high-speed photography. Some simulation results on the bubble radius are presented, which are in agreement with the experimental results, with a maximum difference of about 10%. The reasons why the peak pressure of the first shock wave is only related to the energy released in the bubble during the first half period are addressed. The energy released in the bubble after the first half period increases the bubble pulsation period, but it produces no more than 10% under the peak pressure of the second shock wave.

Research on Operation of Electrothermal Integrated Energy System Including Heat Pump and Thermal Storage Units Based on Capacity Planning

In view of the Three North areas existing wind power absorption and environment pollution problems,the previous scholars have improved the wind abandon problem by adding electrothermal coupling equipment or optimizing power grid operation.In this paper,an electrothermal integrated energy system including heat pump and thermal storage units was proposed.The scheduling model was based on the load data and the output characteristics of power units,each power unit capacity was programmed without constraints,and the proposed scheduling model was compared with the traditional combined heat and power scheduling model.Results showed that the investment and pollutant discharge of the system was reduced respectively.Wind power was fully absorbed.Compared with the traditional thermal power unit,the proportion of the output was significantly decreased by the proposed model.The proposed system could provide a new prospect for wind power absorption and environment protection.