Pedestrian lane formation with following–overtaking model and measurement of system order

Pedestrian self-organizing movement plays a significant role in evacuation studies and architectural design.Lane formation,a typical self-organizing phenomenon,helps pedestrian system to become more orderly,the majority of following behavior model and overtaking behavior model are imprecise and unrealistic compared with pedestrian movement in the real world.In this study,a pedestrian dynamic model considering detailed modelling of the following behavior and overtaking behavior is constructed,and a method of measuring the lane formation and pedestrian system order based on information entropy is proposed.Simulation and analysis demonstrate that the following and avoidance behaviors are important factors of lane formation.A high tendency of following results in good lane formation.Both non-selective following behavior and aggressive overtaking behavior cause the system order to decrease.The most orderly following strategy for a pedestrian is to overtake the former pedestrian whose speed is lower than approximately 70%of his own.The influence of the obstacle layout on pedestrian lane and egress efficiency is also studied with this model.The presence of a small obstacle does not obstruct the walking of pedestrians;in contrast,it may help to improve the egress efficiency by guiding the pedestrian flow and mitigating the reduction of pedestrian system orderliness.

Theoretical investigations of population trapping phenomena in atomic four-color,three-step photoionization scheme

The four-color three-step selective photoionization process of atom is very important in laser isotope separation technology.The population trapping phenomena and their influences are studied theoretically in monochromatic and non-monochromatic laser fields based on the density matrix theory in this work.Time evolutions of the photoionization properties of the four-color,three-step process are given.The population trapping effects occur intensely in monochromatic excitation,while it gradually turns weak as the laser bandwidth increases.The effects of bandwidth,Rabi frequency,time delay,and frequency detuning on the population trapping effect are investigated in monochromatic and non-monochromatic laser fields.The effects of laser process parameters and atomic parameters on the effective selective photoionization are also discussed.The ionization probability and selectivity factors,as evaluation indexes,are difficult to improve synchronously by adjusting systematic parameters.Besides,the existence of metastable state may play a negative role when its population is low enough.

An extended social force model on unidirectional flow considering psychological and behavioral impacts of hazard source

An accurate assessment of the evacuation efficiency in case of disasters is of vital importance to the safety design of buildings and street blocks.Hazard sources not only physically but psychologically affect the pedestrians,which may further alter their behavioral patterns.This effect is especially significant in narrow spaces,such as corridors and alleys.This study aims to integrate a non-spreading hazard source into the social force model following the results from a previous experiment and simulation,and to simulate unidirectional pedestrian flows over various crowd densities and clarity–intensity properties of the hazard source.The integration include a virtual repulsion force from the hazard source and a decay on the social force term.The simulations reveal(i)that the hazard source creates virtual bottlenecks that suppress the flow,(ii)that the inter-pedestrian push forms a stabilisation phase on the flow-density curve within medium-to-high densities,and(iii)that the pedestrians are prone to a less orderly and stable pattern of movement in low clarity–intensity scenarios,possibly with lateral collisions passing the hazard source.

Five-view three-dimensional reconstructionfor ultrafast dynamic imaging of pulsedradiation sources

Multiaxial neutron/x-ray imaging and three-dimensional (3D) reconstruction techniques play a crucial role in gaining valuable insights intothe generation and evolution mechanisms of pulsed radiation sources. Owing to the short emission time (∼200 ns) and drastic changes of thepulsed radiation source, it is necessary to acquire projection data within a few nanoseconds in order to achieve clear computed tomography3D imaging. As a consequence, projection data that can be used for computed tomography image reconstruction at a certain moment are oftenavailable for only a few angles. Traditional algorithms employed in the process of reconstructing 3D images with extremely incomplete datamay introduce significant distortions and artifacts into the final image. In this paper, we propose an iterative image reconstruction methodusing cylindrical harmonic decomposition and a self-supervised denoising network algorithm based on the deep image prior method. Weaugment the prior information with a 2D total variation prior and a 3D deep image prior. Single-wire Z-pinch imaging experiments have beencarried out at Qin-1 facility in five views and four frames, with a time resolution of 3 ns for each frame and a time interval of 40 ns betweenadjacent frames. Both numerical simulations and experiments verify that our proposed algorithm can achieve high-quality reconstructionresults and obtain the 3D intensity distribution and evolution of extreme ultraviolet and soft x-ray emission from plasma.

Detailed analysis and simulation verification for reconstruction of plasma optical boundary with spectrometric technique on HL-2M tokamak

The plasma optical boundary reconstruction technique based on Hommen's theory is promising for future tokamaks with high parameters. In this work, we conduct detailed analysis and simulation verification to estimate the ‘logic loophole' of this technique. The finite-width effect and unpredictable errors reduce the technique's reliability, which leads to this loophole. Based on imaging theory, the photos of a virtual camera are simulated by integrating the assumed luminous intensity of plasma. Based on Hommen's theory, the plasma optical boundary is reconstructed from the photos. Comparing the reconstructed boundary with the one assumed, the logic loophole and its two effects are quantitatively estimated. The finite-width effect is related to the equivalent thickness of the luminous layer, which is generally about 2-4 cm but sometimes larger. The level of unpredictable errors is around 0.65 cm. The technique based on Hommen's theory is generally reliable, but finite-width effect and unpredictable errors have to be taken into consideration in some scenarios. The parameters of HL-2M are applied in this work.

GPU-accelerated three-dimensional reconstruction method of the Compton camera and its application in radionuclide imaging

A novel and fast three-dimensional reconstruction method for a Compton camera and its performance in radionuclide imaging is proposed and analyzed in this study. The conical surface sampling back-projection method with scattering angle correction(CSS-BP-SC) can quickly perform the back-projection process of the Compton cone and can be used to precompute the list-mode maximum likelihood expectation maximization(LM-MLEM). A dedicated parallel architecture was designed for the graphics processing unit acceleration of the back-projection and iteration stage of the CSS-BP-SC-based LM-MLEM. The imaging results of the two-point source Monte Carlo(MC) simulation demonstrate that by analyzing the full width at half maximum along the three coordinate axes, the CSS-BP-SC-based LM-MLEM can obtain imaging results comparable to those of the traditional reconstruction algorithm, that is, the simple back-projection-based LM-MLEM. The imaging results of the mouse phantom MC simulation and experiment demonstrate that the reconstruction results obtained by the proposed method sufficiently coincide with the set radioactivity distribution, and the speed increased by more than 664 times compared to the traditional reconstruction algorithm in the mouse phantom experiment. The proposed method will further advance the imaging applications of Compton cameras.

Theoretical Perspectives of Spin Dynamics in Solid-State Nuclear Magnetic Resonance and Physics

Since the first demonstrations of nuclear magnetic resonance (NMR) in condensed matter in 1946, the field of NMR has yielded a continuous flow of conceptual advances and methodological innovations that continues today. Much progress has been made in the utilization of solid-state NMR to illuminate molecular structure and dynamics in systems not controllable by any other way. NMR deals with time-dependent perturbations of nuclear spin systems and solving the time-dependent Schrodinger equation is a central problem in quantum physics in general and solid-state NMR in particular. This theoretical perspective outlines the methods used to treat theoretical problems in solid-state NMR as well as the recent theoretical development of spin dynamics in NMR and physics. The purpose of this review is to unravel the versatility of theories in solid-state NMR and to present the recent theoretical developments of spin dynamics.

Design,fabrication,and testing of an X-band 9-MeV standing-wave electron linear accelerator

In this study,an X-band standing-wave biperiodic linear accelerator was developed for medical radiotherapy that can accel-erate electrons to 9 MeV using a 2.4-MW klystron.The structure works atπ/2 mode and adopts magnetic coupling between cavities,generating the appropriate adjacent mode separation of 10 MHz.The accelerator is less than 600-mm long and constitutes four bunching cells and 29 normal cells.Geometry optimizations,full-scale radiofrequency(RF)simulations,and beam dynamics calculations were performed.The accelerator was fabricated and examined using a low-power RF test.The cold test results showed a good agreement with the simulation and actual measurement results.In the high-power RF test,the output beam current,energy spectrum,capture ratio,and spot size at the accelerator exit were measured.With the input power of 2.4 MW,the pulse current was 100 mA,and the output spot root-mean-square radius was approximately 0.5 mm.The output kinetic energy was 9.04 MeV with the spectral FWHM of 3.5%,demonstrating the good performance of this accelerator.

Development and preliminary results of a large-pixel two-layer LaBr_(3) Compton camera prototype

Lanthanum bromide(LaBr_(3))crystal has a high energy resolution and time resolution and has been used in Compton cameras(CCs)over the past few decades.However,LaBr_(3) crystal arrays are difficult to process because LaBr_(3) is easy to crack and break;thus,few LaBr_(3)-based CC prototypes have been built.In this study,we designed and fabricated a large-pixel LaBr_(3) CC prototype and evaluated its performance with regard to position,energy,and angular resolution.We used two 10×10 LaBr_(3) crystal arrays with a pixel size of 5 mm×5 mm,silicon photomultipliers(SiPMs),and corresponding decoding circuits to construct our prototype.Additionally,a framework based on a Voronoi diagram and a lookup table was developed for list-mode projection data acquisition.Monte Carlo(MC)simulations based on Geant4 and experiments were conducted to evaluate the performance of our CC prototype.The lateral position resolution was 5 mm,and the maximum deviation in the depth direction was 2.5 and 5 mm for the scatterer and absorber,respectively.The corresponding measured energy resolu-tions were 7.65%and 8.44%,respectively,at 511 keV.The experimental results of ^(137)Cs point-like sources were consistent with the MC simulation results with regard to the spatial positions and full widths at half maximum(FWHMs).The angular resolution of the fabricated prototype was approximately 6°when a point-like ^(137)Cs source was centrally placed at a distance of 5 cm from the scatterer.We proposed and investigated a large-pixel LaBr_(3) CC for the first time and verified its feasibility for use in accurate spatial positioning of radiative sources with a high angular resolution.The proposed CC can satisfy the requirements of radiative source imaging and positioning in the nuclear industry and medical applications.

Comparison of different noble gas injections by massive gas injection on plasma disruption mitigation on Experimental Advanced Superconducting Tokamak

Massive gas injection(MGI)is a traditional plasma disruption mitigation method.This method directly injected massive gas into the pre-disruption plasma and had been developed on the Experimental Advanced Superconducting Tokamak(EAST).Different noble gas injection experiments,including He,Ne,and Ar,were performed to compare the mitigation effect of plasma disruption by evaluating the key parameters such as flight time,pre-thermal quench(pre-TQ),and current quench(CQ).The flight time was shorter for low atomic number(Z)gas,and the decrease in flight time by increasing the amount of gas was insignificant.However,both pre-TQ and CQ durations decreased considerably with the increase in gas injection amount.The effect of atomic mass on pre-TQ and CQ durations showed the opposite trend.The observed trend could help in controlling CQ duration in a reasonable area.Moreover,the analysis of radiation distribution with different impurity injections indicated that low Z impurity could reduce the asymmetry of radiation,which is valuable in mitigating plasma disruption.These results provided essential data support for plasma disruption mitigation on EAST and future fusion devices.

Quasi-coherent mode in core plasma of SUNIST spherical tokamak

A quasi-coherent(QC)mode was observed in the core region of low-density ohmic plasmas in Sino-UNIted Spherical Tokamak.In experiments on the QC mode,two sets of moveable Langmuir probes(LPs)were used to measure the local parameters including floating potential,electron temperature,electron density,and so on,as well as their profiles.To monitor the magnetohydrodynamic activities,a Mirnov probe was used to measure the poloidal magnetic fluctuation.The QC mode can be seen in the spectra of floating potential,but there is no similar peak in the spectra of magnetic fluctuation.Thus,the QC mode is probably electrostatic.By analyzing the electrostatic potential fluctuations from the LPs,the features of the QC mode including frequency,wavenumber,propagation direction,and dependence on collisionality are identified,which are consistent with the characteristics of dissipative trapped electron mode.

Temperature dependence of single-event transients in SiGe heterojunction bipolar transistors for cryogenic applications

We experimentally demonstrate that the dominant mechanism of single-event transients in silicon-germanium heterojunction bipolar transistors(SiGe HBTs)can change with decreasing temperature from+20℃to-180℃.This is accomplished by using a new well-designed cryogenic experimental system suitable for a pulsed-laser platform.Firstly,when the temperature drops from+20℃to-140℃,the increased carrier mobility drives a slight increase in transient amplitude.However,as the temperature decreases further below-140℃,the carrier freeze-out brings about an inflection point,which means the transient amplitude will decrease at cryogenic temperatures.To better understand this result,we analytically calculate the ionization rates of various dopants at different temperatures based on Altermatt's new incomplete ionization model.The parasitic resistivities with temperature on the charge-collection pathway are extracted by a two-dimensional(2D)TCAD process simulation.In addition,we investigate the impact of temperature on the novel electron-injection process from emitter to base under different bias conditions.The increase of the emitter-base junction's barrier height at low temperatures could suppress this electron-injection phenomenon.We have also optimized the built-in voltage equations of a high current compact model(HICUM)by introducing the impact of incomplete ionization.The present results and methods could provide a new reference for effective evaluation of single-event effects in bipolar transistors and circuits at cryogenic temperatures,and could provide a new evidence of the potential of SiGe technology in applications in extreme cryogenic environments.

Observation and mitigation of image distortion in high-energy electron radiography

Image distortion caused by the angular misalignment of quadrupole magnets in high-energy electron radiography has been studied systematically.We propose that the distortion originates from the coupling of the electron motions in the transverse directions,based on a theoretical analysis and the transfer-matrix method.The relative angular rotation between the second and third magnetic quadrupoles was identified as the main contributor to image distortion.This was verified by both a beam-dynamics simulation and experiments.Different strategies to mitigate this image distortion are also explored,including magnets online tuning,higher beam energy and larger magnification factor.This study provides criteria for designing experiments and paves the way for achieving higher image precision.

Current Progress and Future Perspectives of Electrolytes for Rechargeable Aluminum-Ion Batteries

Aluminum-ion batteries(AIBs)with Al metal anode are attracting increasing research interest on account of their high safety,low cost,large volumetric energy density(≈8046 mA h cm−3),and environmental friendliness.Specifically,the reversible Al electrostripping/deposition is achieved with the rapid development of room temperature ionic liquids,and rapid progress has been made in fabricating high-performance and durable AIBs during the past decade.This review provides an integrated comprehension of the evolution of AIBs and highlights the development of various non-aqueous and aqueous electrolytes including high-temperature molten salts,room temperature ionic liquids,and gel–polymer electrolytes.The critical issues on the interplay of electrolytes are outlined in terms of the voltage window span,the effective ion species during charge storage(Al 3+or Al x Cl?y)and their underlying charge transfer(e.g.,interfacial transfer and diffusion),and the solid electrolyte interface formation and its role.Following the critical insight,future perspectives on how to practically design feasible AIBs are given.

Applications of Floquet-Magnus and Fer Expansion Approaches during Cross Polarization Radiation in Solid State NMR

This paper investigates the concept of Cross Polarization (CP) experiment in addition to revisiting the two potential expansion schemes recently developed in the field of solid-state nuclear magnetic resonance (SSNMR): namely, the Floquet-Magnus expansion and the Fer expansion. We use the aforementioned expansion schemes for the calculation of effective Hamiltonians and propagators when the spin system undergoes Cross Polarization radiation. CP is the gateway experiment into SSNMR. An in-depth comprehension of the underlying mechanics of spin dynamics during the cross-polarization experiment is pivotal for further experimental developments and optimization of more complex solid-state NMR experiments. The main contribution of this work is a prospect related to spin physics;particularly regarding to generalization of the calculation. This work reports original yet interesting novel ideas and developments that include calculations performed on the CP experiment. In fact, the approach presented could play a major role in the interpretation of several fine NMR experiments in solids, which would in turn provide significant new insights in spin physics. The generality of the work points towards potential applications in problems related in solid-state NMR and theoretical developments of spectroscopy as well as interdisciplinary research areas as long as they include spin dynamics concepts.

Finesse measurement for high-power optical enhancement cavity

Finesse is a critical parameter for describing the characteristics of an optical enhancement cavity(OEC). This paper first presents a review of finesse measurement techniques, including a comparative analysis of the advantages, disadvantages, and potential limitations of several main methods from both theoretical and practical perspectives. A variant of the existing method called the free spectral range(FSR) modulation method is proposed and compared with three other finesse measurement methods, i.e., the fast-switching cavity ring-down(CRD) method, the rapidly swept-frequency(SF) CRD method, and the ringing effect method. A high-power OEC platform with a high finesse of approximately 16000 is built and measured with the four methods. The performance of these methods is compared, and the results show that the FSR modulation method and the fast-switching CRD method are more suitable and accurate than the other two methods for high-finesse OEC measurements. The CRD method and the ringing effect method can be implemented in open loop using simple equipment and are easy to perform. Additionally, recommendations for selecting finesse measurement methods under different conditions are proposed, which benefit the development of OEC and its applications.

Short-term displacement prediction for newly established monitoring slopes based on transfer learning

This study makes a significant progress in addressing the challenges of short-term slope displacement prediction in the Universal Landslide Monitoring Program,an unprecedented disaster mitigation program in China,where lots of newly established monitoring slopes lack sufficient historical deformation data,making it difficult to extract deformation patterns and provide effective predictions which plays a crucial role in the early warning and forecasting of landslide hazards.A slope displacement prediction method based on transfer learning is therefore proposed.Initially,the method transfers the deformation patterns learned from slopes with relatively rich deformation data by a pre-trained model based on a multi-slope integrated dataset to newly established monitoring slopes with limited or even no useful data,thus enabling rapid and efficient predictions for these slopes.Subsequently,as time goes on and monitoring data accumulates,fine-tuning of the pre-trained model for individual slopes can further improve prediction accuracy,enabling continuous optimization of prediction results.A case study indicates that,after being trained on a multi-slope integrated dataset,the TCN-Transformer model can efficiently serve as a pretrained model for displacement prediction at newly established monitoring slopes.The three-day average RMSE is significantly reduced by 34.6%compared to models trained only on individual slope data,and it also successfully predicts the majority of deformation peaks.The fine-tuned model based on accumulated data on the target newly established monitoring slope further reduced the three-day RMSE by 37.2%,demonstrating a considerable predictive accuracy.In conclusion,taking advantage of transfer learning,the proposed slope displacement prediction method effectively utilizes the available data,which enables the rapid deployment and continual refinement of displacement predictions on newly established monitoring slopes.

On-chip ultrafast stackable dielectric laser positron accelerator

We present a first on-chip positron accelerator based on dielectric laser acceleration.This innovative approach significantly reduces the physical dimensions of the positron acceleration apparatus,enhancing its feasibility for diverse applications.By utilizing a stacked acceleration structure and far-infrared laser technology,we are able to achieve a seven-stage acceleration structure that surpasses the distance and energy gain of using the previous dielectric laser acceleration methods.Additionally,we are able to compress the positron beam to an ultrafast sub-femtosecond scale during the acceleration process,compared with the traditional methods,the positron beam is compressed to a greater extent.We also demonstrate the robustness of the stacked acceleration structure through the successful acceleration of the positron beam.

Small-scale fire tests in the underwater tunnel section model with new sidewall smoke extraction

The Shenzhen–Zhongshan Bridge is a 24‐km‐long bridge and tunnel system,including a 6.8-km-long super cross section subsea tunnel.To solve the smoke exhaust problem of a super large cross-section subsea tunnel,the tunnel has a new smoke exhaust system that combines a horizontal smoke exhaust cross section at the top and sidewall smoke exhaust holes.In order to evaluate the potential fire hazards of this type of tunnel,a 1:30 tunnel model was established and 140 smallscale experiments on underwater tunnel fires were conducted.By changing the fire power,fire location,and fan operation mode,different scenarios of submarine immersed tunnel fire were simulated and the related key parameters such as fire smoke diffusion behavior and smoke temperature distribution were studied.On this basis,the optimal smoke control strategy was proposed for different fire scenarios.The research results indicate that the new smoke exhaust system can fully utilize the smoke flow characteristics,significantly improve smoke exhaust efficiency,and increase available evacuation time,thus further enhancing the fire safety of super large cross-section subsea tunnels.