Bi 2O 3 nanoparticles were prepared by means of ammonia precipitation, polyol mediated methods and microemulsion chemical method. The structure and properties of the as-prepared nanoparticles, having been submitted to...Bi 2O 3 nanoparticles were prepared by means of ammonia precipitation, polyol mediated methods and microemulsion chemical method. The structure and properties of the as-prepared nanoparticles, having been submitted to a heat-treatment test at 750 ℃, were characterized by means of XRD, BET, XPS and UV-Vis absorption techniques. The photocatalytic oxidation reactions of benzene, toluene and xylene were used as the model reaction to measure the photocatalytic activity of Bi 2O 3 nanoparticles, respectively. The results show that the crystallite size of Bi 2O 3 prepared with different methods and calcined at 750 ℃ were 50.6, 38.5 and 31.5 nm, respectively. The photocatalytic activity of Bi 2O 3 nanoparticles prepared with the microemulsion chemical method was higher than that of the particles prepared with the polyol mediated method; and that of the particles prepared with the micromulsion chemical method was the highest among the three. The degradation rates of the three pollutants xylene, toluene and benzene decreased in sequence.展开更多
Copper phthalocyanine was selected as the photosensitizer to sensitize TiO2 in this experiment with furfural as the target pollutant. The composite catalysts（TiO2/CuPC） obtained showed a great activity under a xenon...Copper phthalocyanine was selected as the photosensitizer to sensitize TiO2 in this experiment with furfural as the target pollutant. The composite catalysts（TiO2/CuPC） obtained showed a great activity under a xenon lamp. By experiments, the optimal preparation conditions of the composite catalysts were set as follows ： the CuPC loading mass fraction was 1.5%, the mass fraction of acetylacetone was 0. 3% , and the stirring time was 10 h. UV-Vis diffuse reflectance spectra, XRD, and BET were used to characterize the properties of the composite catalysts, which showed that after loading CuPC on TiO2, the composite catalyst retained the same crystal structure as pure TiO2 and the wavelength range of its absorption spectrum was broadened to 600-700 nm while its surface area was smaller than that of the pure TiO2. Under the optimal conditions, 20 mg/L furfural solution was degraded by nearly 90% and TOC by about 70%. When the catalyst was reused 6 times, the activity of the catalyst was still retained by about 75%.展开更多
基金the National Natural Science Foundation of China(No.2 0 2 770 15 )
文摘Bi 2O 3 nanoparticles were prepared by means of ammonia precipitation, polyol mediated methods and microemulsion chemical method. The structure and properties of the as-prepared nanoparticles, having been submitted to a heat-treatment test at 750 ℃, were characterized by means of XRD, BET, XPS and UV-Vis absorption techniques. The photocatalytic oxidation reactions of benzene, toluene and xylene were used as the model reaction to measure the photocatalytic activity of Bi 2O 3 nanoparticles, respectively. The results show that the crystallite size of Bi 2O 3 prepared with different methods and calcined at 750 ℃ were 50.6, 38.5 and 31.5 nm, respectively. The photocatalytic activity of Bi 2O 3 nanoparticles prepared with the microemulsion chemical method was higher than that of the particles prepared with the polyol mediated method; and that of the particles prepared with the micromulsion chemical method was the highest among the three. The degradation rates of the three pollutants xylene, toluene and benzene decreased in sequence.
基金Jilin Scientific Research Committee Foundation(No 20010422)
文摘Copper phthalocyanine was selected as the photosensitizer to sensitize TiO2 in this experiment with furfural as the target pollutant. The composite catalysts（TiO2/CuPC） obtained showed a great activity under a xenon lamp. By experiments, the optimal preparation conditions of the composite catalysts were set as follows ： the CuPC loading mass fraction was 1.5%, the mass fraction of acetylacetone was 0. 3% , and the stirring time was 10 h. UV-Vis diffuse reflectance spectra, XRD, and BET were used to characterize the properties of the composite catalysts, which showed that after loading CuPC on TiO2, the composite catalyst retained the same crystal structure as pure TiO2 and the wavelength range of its absorption spectrum was broadened to 600-700 nm while its surface area was smaller than that of the pure TiO2. Under the optimal conditions, 20 mg/L furfural solution was degraded by nearly 90% and TOC by about 70%. When the catalyst was reused 6 times, the activity of the catalyst was still retained by about 75%.
