The stress corrosion cracking（SCC） behaviour of 7A52 aluminum alloy in air and in 3.5% NaCl solution was researched by slow strain rate test（SSRT） and SEM-EDS. The SCC susceptibility was estimated with the loss of...The stress corrosion cracking（SCC） behaviour of 7A52 aluminum alloy in air and in 3.5% NaCl solution was researched by slow strain rate test（SSRT） and SEM-EDS. The SCC susceptibility was estimated with the loss of the reduction in area. The experimental results indicate that the SCC susceptibility of 7A52 aluminum alloy in 3.5% chloride solution is the highest at strain rate of 1×10-6 s-1. The lowest one is under the condition of 1×10-5 s-1. Stress concentration and anode dissolving around Al-Fe-Mn intermetallics initiate micropores which will result in microcracks. The existence of intermetallics in the microstructure may play an important role in understanding the SCC initiation mechanisms of 7A52 aluminum alloy.展开更多
CrMoN composite coatings were deposited on the surface of the stainless steel by magnetron sputtering, then were treated by low temperature ion sulfuration. FESEM equipped with EDX was adopted to analyze the morpholog...CrMoN composite coatings were deposited on the surface of the stainless steel by magnetron sputtering, then were treated by low temperature ion sulfuration. FESEM equipped with EDX was adopted to analyze the morphologies and compositions of the surface, cross-section and worn scar of the sulfuration layer. The valence states of the film surface were detected by XPS. The nano-hardness and nano-modulus of the layer were measured by a nano tester. The results of the friction and wear show that the CrMoN/MoS2 composite coating is a kind of ideal solid lubrication layer and possess an excellent antifriction and wear-resistance.展开更多
基金Funded by the National Natural Science Foundation of China (No. 50801066)
文摘The stress corrosion cracking（SCC） behaviour of 7A52 aluminum alloy in air and in 3.5% NaCl solution was researched by slow strain rate test（SSRT） and SEM-EDS. The SCC susceptibility was estimated with the loss of the reduction in area. The experimental results indicate that the SCC susceptibility of 7A52 aluminum alloy in 3.5% chloride solution is the highest at strain rate of 1×10-6 s-1. The lowest one is under the condition of 1×10-5 s-1. Stress concentration and anode dissolving around Al-Fe-Mn intermetallics initiate micropores which will result in microcracks. The existence of intermetallics in the microstructure may play an important role in understanding the SCC initiation mechanisms of 7A52 aluminum alloy.
基金supported by the National Natural Science Foundation of China(No.50901089)National Key Laboratory for Remanufacturing(No.9140C850207100C8506)
文摘CrMoN composite coatings were deposited on the surface of the stainless steel by magnetron sputtering, then were treated by low temperature ion sulfuration. FESEM equipped with EDX was adopted to analyze the morphologies and compositions of the surface, cross-section and worn scar of the sulfuration layer. The valence states of the film surface were detected by XPS. The nano-hardness and nano-modulus of the layer were measured by a nano tester. The results of the friction and wear show that the CrMoN/MoS2 composite coating is a kind of ideal solid lubrication layer and possess an excellent antifriction and wear-resistance.
