Diffusion of Sm-Nd in Scheelite and its Significance to Isotopic Dating and Tracing

As the principal ore mineral in various tungsten(-gold)deposits,scheelite(CaWO_(4))plays an important role in directly dating the timing of ore formation,and in tracing associated material sources through the study of its Sm-Nd geochronology and Nd isotopic characteristics.Since the retention of Sm-Nd systematics within scheelite is presently unconstrained,equivocal interpretations for isotopic data resulting from this method have occurred quite often in previous studies that apply these isotopic data.In order to better elucidate the closure of Sm-Nd in scheelite,the kinetics of Sm and Nd within this mineral lattice were investigated through calculation of diffusion constants presented herein.The following Arrhenius relations were obtained:D_(Nd)=4.00exp(-438 kJ·mol^(–1)/RT)cm^(2)/s D_(Sm)=1.85exp(-427 kJ·mol^(–1)/RT)cm^(2)/s showing diffusion rate of Nd is near identical to Sm in scheelite when at the same temperature.However,compared to other rare earth elements(REEs),which have markedly different atomic radii to either Nd or Sm,these are shown to exhibit a great variation in diffusivities.The observed trends in our data are in excellent agreement with the diffusion characteristics of REEs in other tetragonal ABO4 minerals,indicating that ionic radius is a key constraint to the diffusivity of REEs in the various crystal lattices.With this in mind,the same substitution mechanism and a very slight discrepancy in radii will allow us to infer that significant Sm/Nd diffusional fractionation in scheelite is unlikely to occur during most geological processes.Based upon the diffusion data determined herein,Sm and Nd closure temperatures and retention times in scheelite are discussed in terms of diffusion dynamics.Those results suggest that closure temperatures for Sm-Nd within this mineral are relatively high in contrast to the temperature ranges of ore-formation responsible for scheelite-related deposits,and any later thermal environments.It is likely,therefore,that relevant isotopic information could be easily retained under most geological conditions,since initial crystallization of the scheelite.In addition,comparison of this mineral-element pair over a range of temperatures with some other common minerals used as geochronometers(e.g.,zircon and apatite)indicates that Sm-Nd system has a slower diffusive rate in scheelite than for Sr in apatite or Ar in quartz,and only a little faster than for Pb in zircon.It should be noted,within most hydrothermal deposits where zircon has crystallized,its size is typically no more than 100μm,whereas scheelite commonly occurs as macroscopic grains.For this reason,the larger dimensions of scheelite would provide a robust Sm-Nd system more able to resist perturbations,relating to any later thermal process.As such Sm-Nd investigations of scheelite are akin to U-Pb within zircon samples used in isotopic dating.These observations indicate that Sm-Nd age and isotopic information can provide reliable data in all but the most extreme case,especially when data are extracted from macroscopic grains of scheelite that are chosen to be“pristine”(i.e.,free of surface alteration and/or fractures).

An overview of hydrodynamic studies of mineralization

Fluid flow is an integral part of hydrothermal mineralization, and its analysis and characterization constitute an important part of a mineralization model. The hydrodynamic study of mineralization deals with analyzing the driving forces, fluid pressure regimes, fluid flow rate and direction, and their relationships with localization of mineralization. This paper reviews the principles and methods of hydrodynamic studies of mineralization, and discusses their significance and limitations for ore deposit studies and mineral exploration. The driving forces of fluid flow may be related to fluid overpressure, topographic relief, tectonic deformation, and fluid density change due to heating or salinity variation, depending on specific geologic environments and mineralization processes. The study methods may be classified into three types, megascopic （field） observations, microscopic analyses, and numerical modeling. Megascopic features indicative of significantly overpressured （especially lithostatic or supralithostatic） fluid systems include horizontal veins, sand injection dikes, and hydraulic breccias. Microscopic studies, especially microthermometry of fluid inclusions and combined stress analysis and microthermometry of fluid inclusion planes （FIPs） can provide important information about fluid temperature, pressure, and fluid-structural relationships, thus constraining fluid flow models. Numerical modeling can be carried out to solve partial differential equations governing fluid flow, heat transfer, rock deformation and chemical reactions, in order to simulate the distribution of fluid pressure, temperature, fluid flow rate and direction, and mineral precipitation or dissolution in 2D or 3D space and through time. The results of hydrodynamic studies of mineralization can enhance our understanding of the formation nrocesses of hvdrothermal denosits, and can be used directly or indirectly in mineral exnloration.

Effects of hydrocarbon generation on fluid flow in the Ordos Basin and its relationship to uranium mineralization

The Ordos Basin of North China is not only an important uranium mineralization province, but also a major producer of oil, gas and coal in China. The genetic relationship between uranium mineralization and hydrocarbons has been recognized by a number of previous studies, but it has not been well understood in terms of the hydrodynamics of basin fluid flow. We have demonstrated in a previous study that the preferential localization of Cretaceous uranium mineralization in the upper part of the Ordos Jurassic section may have been related to the interface between an upward flowing, reducing fluid and a downward flowing, oxidizing fluid. This interface may have been controlled by the interplay between fluid overpressure related to disequilibrium sediment compaction and which drove the upward flow, and topographic relief, which drove the downward flow. In this study, we carried out numerical modeling for the contribution of oil and gas generation to the development of fluid overpressure, in addition to sedi- ment compaction and heating. Our results indicate that when hydrocarbon generation is taken into account, fluid overpressure during the Cretaceous was more than doubled in comparison with the simu- lation when hydrocarbon generation was not considered. Furthermore, fluid overpressure dissipation at the end of sedimentation slowed down relative to the no-hydrocarbon generation case. These results suggest that hydrocarbon generation may have played an important role in uranium mineralization, not only in providing reducing agents required for the mineralization, but also in contributing to the driving force to maintain the upward flow.

U-Pb Zircon Age, Geochemical, and Sr-Nd-Pb Isotopic Constraints on the Age and Origin of Mafic Dykes from Eastern Shandong Province, Eastern China

U-Pb zircon age, geochemical, and Sr-Nd-Pb isotopic data of mafic dykes from eastern Shandong Province, eastern China is reported herein. Laser ablation inductively coupled plasma mass spectrometry （LA-ICP-MS） U-Pb zircon analyses of two samples from the investigated mafic dykes yield consistent ages ranging from 121.9 Ma ± 0.47 Ma to 122.9 Ma ± 0.61 Ma. The mafic dykes are characterized by high （87Sr/86Sr） i ranging from 0.7087 to 0.7089, low εNd（t） values ranging from -16.9 to -17.8, 206Pb/204Pb = 17.15 to 17.17, 207Pb/204Pb = 15.45 to 15.47, and 208Pb/204Pb = 37.59 to 37.68. Results from the current study suggest that the mafic dykes are derived from partial melting of ancient lithospheric mantle that was variably hybridized by melts derived from foundered lower crustal eclogite. The mafic dykes may have been generated through subsequent insignificant crystal fractionation and very minor crustal contamination during magma ascent. Combined with previous studies, the current findings provide new evidence that the intense lithospheric thinning beneath the eastern Shandong Province of eastern China occurred at ~120 Ma, and that this condition was caused by the removal of the lower lithosphere （mantle and lower crust）.

Hydrodynamic analysis of clastic injection and hydraulic fracturing structures in the Jinding Zn-Pb deposit,Yunnan,China

The Jinding Zn-Pb deposit has been generally considered to have formed from circulating basinal fluids in a relatively passive way, with fluid flow being controlled by structures and sedimentary facies, similar to many other sediments-hosted base metal deposits. However, several recent studies have revealed the presence of sand injection structures, intrusive breccias, and hydraulic fractures in the open pit of the Jinding deposit and suggested that the deposit was formed from explosive release of overpres- sured fluids. This study reports new observations of fluid overpressure-related structures from under- ground workings （Paomaping and Fengzishan）, which show clearer crosscutting relationships than in the open pit. The observed structures include： 1） sand （--rock fragment） dikes injecting into fractures in solidified rocks; 2） sand （~rock fragment） bodies intruding into unconsolidated or semi-consolidated sediments; 3） disintegrated semi-consolidated sand bodies; and 4） veins and breccias formed from hydraulic fracturing of solidified rocks followed by cementation of hydrothermal minerals. The development of ore minerals （sphalerite） in the cement of the various clastic injection and hydraulic fractures indicate that these structures were formed at the same time as mineralization. The development of hydraulic fractures and breccias with random orientation indicates small differential stress during mineralization, which is different from the stress field with strong horizontal shortening prior to miner- alization. Fluid flow velocity may have been up to more than 11 m/s based on calculations from the size of the fragments in the clastic dikes. The clastic injection and hydraulic fracturing structures are interpreted to have formed from explosive release of overpressured fluids, which may have been related to either magmatic intrusions at depth or seismic activities that episodically tapped an overpressured fluid reservoir. Because the clastic injection and hydraulic structures are genetically linked with the mineralizing fluid source, they can be used as a guide for mineral exploration.

Characteristics and Dolomitization of Upper Cambrian to Lower Ordovician Dolomite from Outcrop in Keping Uplift, Western Tarim Basin, Northwest China

Late Cambrian to Early Ordovician sedimentary rocks in the western Tarim Basin, Northwest China, are composed of shallow-marine platform carbonates. The Keping Uplift is located in the northwest region of this basin. On the basis of petrographic and geochemical features, four matrix replacement dolomites and one type of cement dolomite are identified. Matrix replacement dolomites include （1） micritic dolomites （MD1）; （2） fine-coarse euhedral floating dolomites （MD2）; （3） fine-coarse euhedral dolomites （MD3）; and （4） medium-very coarse anhedral mosaic dolomites （MD4）. Dolomite cement occurs in minor amounts as coarse saddle dolomite cement （CD1） that mostly fills vugs and fractures in the matrix dolomites. These matrix dolomites have δ18O values of ？9.7‰ to ？3.0‰ VPDB （Vienna Pee Dee Belemnite）; δ13C values of ？0.8‰ to 3.5‰ VPDB; 87Sr/86Sr ratios of 0.708516 to 0.709643; Sr concentrations of 50 to 257 ppm; Fe contents of 425 to 16878 ppm; and Mn contents of 28 to 144 ppm. Petrographic and geochemical data suggest that the matrix replacement dolomites were likely formed by normal and evaporative seawater in early stages prior to chemical compaction at shallow burial depths. Compared with matrix dolomites, dolomite cement yields lower δ18O values （？12.9‰ to ？9.1‰ VPDB）; slightly lower δ13C values （？1.6‰-0.6‰ VPDB）; higher 87Sr/86Sr ratios （0.709165-0.709764）; and high homogenization temperature （Th） values （98°C-225°C） and salinities （6 wt%-24 wt% NaCl equivalent）. Limited data from dolomite cement shows a low Sr concentration （58.6 ppm） and high Fe and Mn contents （1233 and 1250 ppm, respectively）. These data imply that the dolomite cement precipitated from higher temperature hydrothermal salinity fluids. These fluids could be related to widespread igneous activities in the Tarim Basin occurring during Permian time when the host dolostones were deeply buried. Faults likely acted as important conduits that channeled dolomitizing fluids from the underlying strata into the basal carbonates, leading to intense dolomitization. Therefore, dolomitization, in the Keping Uplift area is likely related to evaporated seawater via seepage reflux in addition to burial processes and hydrothermal fluids.

Microstructural analysis of a subhorizontal gold-quartz vein deposit at Donalda,Abitibi greenstone belt,Canada:Implications for hydrodynamic regime and fluid-structural relationship

The Donalda gold deposit in the southern part of the Archean Abitibi greenstone belt consists mainly of a subhonzontal gold-quartz vein perpendicular to subvertical shear zones.The 0.3—0.5 m thick vein is characterized by vein-parallel banding structures indicating multiple episodes of fracture opening and mineral precipitation.Measurement of the c-axis of primary growth quartz indicates that quartz preferentially grew perpendicular to the fracture,suggesting open space filling and/or extensional nature of the fracture.Measurement of the orientations of microfractures,veinlets and fluid—inclusion planes（FIPs） crosscutting primary growth quartz indicates that the vein minerals were subject to a vertical maximum principal stress（σ_1）,which is inconsistent with the subhorizontalσ_1 inferred from the regional stress field with N—S shortening.This apparent discrepancy is explained by invoking episodic fluid pressure fluctuation between supralithostatic and hydrostatic regimes accompanied by episodic opening and closing of the sub-horizontal fracture.When fluid pressure was higher than the lithostatic value,the fracture was opened and primary growth minerals were precipitated,whereas when fluid pressure decreased toward the hydrostatic value,the hanging wall of the fracture collapsed,causing collision of protruding primary growth minerals from both sides of the fracture and resulting in formation of vein-parallel deformation bands.The columns where the two facing sides of the fracture collided were subject to higher-than-lithostatic stress due to the bridging effect and reduced support surface area,explaining the development of verticalσ_1.This hypothesis is consistent the fault-valve model,and explains the flipping ofσ_1 without having to change the regional stress field.

The Major Controlling Factors and Different Oolitic Shoal Reservoir Characteristics of the Triassic Feixianguan Formation,Eastern Longgang Area,NE Sichuan Basin,SW China

Based on comprehensive analyses of occurrence,petrological observation,pore structure and geochemistry,the different reservoir characteristics and reservoir evolutionary pathways between different oolitic shoal reservoir types of the Feixianguan Formation on the west side of the Kaijiang-Liangping Trough have been studied.There exist three stages of high-energy slope break belts in the Feixianguan period,the corresponding three stages of oolitic shoals gradually migrating in the direction of the trough.Three types of oolitic shoal reservoirs,namely,residual-oolitic dolomite,mold-oolitic dolomite and sparry oolitic limestone,were formed during sedimentary-diagenetic evolution,the pore types being intergranular dissolved pore,mold pore(or intragranular dissolved pore)and residual intergranular pore,respectively.The petrology,physical properties and pore structure of the different types of oolitic shoal reservoirs are quite different.Residual-oolitic dolomite reservoirs have the best quality,while sparry oolitic limestone reservoirs have the poorest.Combined with analyses of trace elements,rare earth elements and carbon-oxygen isotopes,it is suggested that the formation of residual-oolitic dolomite reservoirs is jointly controlled by penesaline seawater seepage-reflux dolomitization and hydrothermal dolomitization.Mold-pore oolitic dolomite reservoirs are controlled by penesaline seawater seepage-reflux dolomitization and meteoric water solution.The burial dissolution of organic acid not only further improves the reservoir qualities of previously formed oolitic dolomite reservoirs,but also preserves residual intergranular pores in the sparry oolitic limestone reservoirs.

Assessment of heavy metals in sediment cores from Xiangjiang River,Chang-Zhu-Tan region,Hunan Province,China

Samples were collected from two core sediments(C1 and C2) of Xiangjiang River,Chang-Zhu-Tan region,Hunan Province,China.The heavy metal contents are relatively higher,especially for the surface or near the surface layers.The calculated anthropogenic factor values indicate that all the heavy metals except for Cr in the core samples are enriched,especially for Cd,with the maximum enriching coefficients of 119.44,and 84.67 in C1 and C2,respectively.The correlation of heavy metals with sulphur indicates that they are precipitated as metal sulphides.Correlation matrix shows significant association between heavy metals and mud.Factor analysis identifies that signified anthropogenic activities affect the region of Xiangjiang River.

Origin of dolomite in the Middle Ordovician peritidal platform carbonates in the northern Ordos Basin, western China

The carbonates in the Middle Ordovician Ma_5～5submember of the Majiagou Formation in the northern Ordos Basin are partially to completely dolomitized.Two types of replacive dolomite are distinguished：（1） type 1dolomite,which is primarily characterized by microcrystalline（〈30 urn）,euhedral to subhedral dolomite crystals,and is generally laminated and associated with gypsumbearing microcrystalline dolomite,and（2） type 2 dolomite,which is composed primarily of finely crystalline（30-100 urn）,regular crystal plane,euhedral to subhedral dolomite.The type 2 dolomite crystals are truncated by stylolites,indicating that the type 2 dolomite most likely predated or developed simultaneously with the formation of the stylolites.Stratigraphic,petrographic,and geochemical data indicate that the type 1 dolomite formed from near-surface,low-temperature,and slightly evaporated seawater and that the dolomitizing fluids may have been driven by density differences and elevation-related hydraulic head.The absence of massive depositional evaporites in the dolomitized intervals indicates that dolomitization was driven by the reflux of slightly evaporated seawater.The δ～（18）O values（-7.5 to-6.1 ‰） of type1 dolomite are slightly lower than those of seawaterderived dolomite,suggesting that the dolomite may be related to the recrystallization of dolomite at higher temperatures during burial.The type 2 dolomite has lowerδ～（18）O values（-8.5 to-6.7 ‰） and Sr～（2＋） concentration and slightly higher Na～＋,Fe～（2＋）,and Mn～（2＋） concentrations and～（87）Sr/～（86）Sr ratios（0.709188-0.709485） than type 1 dolomite,suggesting that the type 2 dolomite precipitated from modified seawater and dolomitic fluids in pore water and that it developed at slightly higher temperatures as a result of shallow burial.

New Discovery of Post-Magmatic Pyrite in Natural Coke at Yangliu Coalmine,Northern China

Objective Material exchange between magma and coal has recently received much attention, with published studies dedicated mainly to intrusion-related geochemical anomalies(An et al., 2017). It is found that magmatism not only alters the chemical compositions of coal seams, but also brings new minerals to natural coke. Although some studies have related magmatic water to secondary minerals in the natural coke, the mineral formation

Geochemical constraints on the origin of Early Cretaceous alkaline intrusions and its tectonic implication,Sulu Orogenic Belt,Eastern North China Craton

Post-orogenic alkaline intrusions from the Sulu Orogenic Belt of eastern North China Craton consist of A-type granites.In this study,we report U-Pb zircon ages,geochemical data,Sr-Nd-Pb,and zircon Hf isotopic data for these rocks.The LA-ICP-MS U-Pb zircon analyses yield consistent ages ranging from 127.1±2.4 to 119.5±4.8 Ma for four samples.The alkaline rocks are characterized by high total alkalis(K2 O+Na2 O=8.32-10.11 wt%),light rare-earth element enrichment,and heavy rare-earth element depletion,with a wide range(La/Yb)N values(20-48),moderate negative Eu anomalies(Eu/Eu*=0.50-0.74),enrichment in large-ion lithophile elements(LILEs,i.e.,Rb,Th,U and Pb),and depletion in Ba,Sr and high field strength elements(HFSEs,i.e.,Nb,Ta,and Ti),high(87Sr/86Sr)i ranging from 0.708 to 0.7089,low sNd(t)values from-19.4 to-16.8,(206Pb/204Pb)i=16.751-16.935,(207Pb/204Pb)i=15.381-15.535,(208-Pb/204Pb)i=37.472-37.838,negativeεHf(t)values between-21.3 and-25.7 for the magmatic zircons,and larger TDM2 model ages from 2.5 to 2.8 Ga.These results suggest that the rocks were derived from a common enriched lithospheric mantle source that was metasomatized by foundered lower crustal eclogitic materials before magma generation.Furthermore,the geochemical and isotopic feature implies that the primary magma of these rocks originated through partial melting of ancient lithospheric mantle that was variably hybridized by melts derived from lower crust eclogite.These rocks in this study may have been generated by subsequent fractionation of potassium feldspar,plagioclase,ilmenite,and/or rutile.However,negligible crustal contamination occurred during the diagenesis process.

Determination of Fe^(2+)/Fe^(3+)Ratios of Magnetite using Different Methods:A Case Study from the Qimantag Metallogenic Belt

Determination of Fe^(2+)/Fe^(3+) ratios from metallogenic belts to explore controlling physical and chemical conditions of rock formation is of great significance.In order to explore magnetite Fe^(2+)/Fe^(3+) ratios of the Qimantag metallogenic belt,part of the Eastern Kunlun orogenic belt in the northeastern margin of the Qinghai–Tibetan plateau,western Central Orogenic Belt of China,and overcome the limitation of the traditional electronic probe,five different measurement methods are proposed and their respective advantages and disadvantages evaluated,with the composition data of the magnetite obtained using electron probe microanalysis(EPMA).The direct oxygen measurement method has a significant impact on the determination results of FeO and Fe2O3,but the accuracy and uniformity of the results are low.The valence method(Flank method)based on the spectral intensity ratio of Lαto Lβfor iron is also unreliable for FeO and Fe_(2)O^(3) measurements because it is difficult to establish a relationship between Lβ/Lα,the spectral intensity ratio,and the Fe^(2+)/Fe^(3+) content ratio.In comparison,the charge difference method,the surplus-oxygen method and the Mössbauer spectrum method are still the most favorable.Mössbauer spectroscopy,with its isomer movement particularly sensitive to the oxidation state of iron,yields results closer to 0.5,which is relatively reliable.Earlier magnetite deposits are located in intrusions or contact zones and formed by magmatic fluids with high Fe2+/Fe3+ratios,whereas later magnetite deposits are farther away from intrusions and have low Fe^(2+)/Fe^(3+) ratios.The transformation mechanism of hematite and magnetite in the Qimantage metallogenic belt is also studied.No large volume changes,such as pore filling and shrinkage fracture,were detected in the metallogenic belt,and the transformation mechanism is more similar to a reoxidation and reduction mechanism.

Zircon U-Pb Age,Geochemical,and Sr-Nd-Pb-Hf Isotopic Constraints on the Time Frame and Origin of Early Cretaceous Mafic Dykes in the Wuling Mountain Gravity Lineament,South China

In view of the importance of mafic dyke swarms and their contribution to current scientific problems relating to South China,herein,we present the findings of studies on twenty–five representative mafic dykes cropping out in Hunan Province and Guangxi Zhuang Autonomous Region,within the southern Wuling Mountain gravity lineament,China.These results include new zircon LA-ICP-MS U-Pb age,whole rock geochemical,Sr-Nd-Pb isotopic,and zircon Hf isotopic data for these dykes.The dykes formed between 131.5±1.2 and 121.6±1.1 Ma,and have typical doleritic textures.They fall into the alkaline and shoshonitic series,are enriched in light rare earth elements(LREE),some large ion lithophile elements(LILE;e.g.,Rb,Ba,and Sr),Th,U,and Pb,and are depleted in Nb,Ta,Hf,and Ti.Moreover,the dolerites have high initial 87 Sr/86 Sr ratios(0.7055–0.7057),negativeεNd(t)and zirconεHf(t)values(-14.8 to-11.9,-30.4 to-14.9),and relatively constant initial Pb isotopic ratios(that are EM1-like,16.77–16.94,15.43–15.47,and 36.84–36.92 for 206 Pb/204 Pb,207 Pb/204 Pb,and 208 Pb/204 Pb,respectively).These results indicate that the dykes were likely derived from magma generated through low-degree partial melting(1.0%–10%)of an EM1-like garnet–lherzolite mantle source.The parental magmas fractionated olivine,clinopyroxene,plagioclase,and Ti-bearing phases with negligible crustal contamination,during ascent and dyke emplacement.Several possible models have been proposed to explain the origin of Mesozoic magmatism along the Wuling Mountain gravity lineament.Herein we propose a reasonable model for the origin of these mafic dykes,involving the collision between the paleo-Pacific Plate and South China,which led to subsequent lithospheric extension and asthenosphere upwelling,resulting in partial melting the underlying mantle lithosphere in the Early Cretaceous,to form the parental magmas to the WMGL mafic dykes,as studied.

Characteristics and Natural Gas Origin of Middle-Late Triassic Marine Source Rocks of the Western Sichuan Depression, SW China

A scientific exploration well(CK1) was drilled to expand the oil/gas production in the western Sichuan depression, SW, China. Seventy-three core samples and four natural gas samples from the Middle–Late Triassic strata were analyzed to determine the paleo-depositional setting and the abundance of organic matter(OM) and to evaluate the hydrocarbon-generation process and potential. This information was then used to identify the origin of the natural gas. The OM is characterized by medium n-alkanes(n C15–n C19), low pristane/phytane and terrigenous aquatic ratios(TAR), a carbon preference index(CPI) of ~1, regular steranes with C29 > C27 > C28, gammacerane/C30 hopane ratios of 0.15–0.32, and δDorg of-132‰ to-58‰, suggesting a marine algal/phytoplankton source with terrestrial input deposited in a reducing–transitional saline/marine sedimentary environment. Based on the TOC, HI index, and chloroform bitumen "A" the algalrich dolomites of the Leikoupo Formation are fair–good source rocks;the grey limestones of the Maantang Formation are fair source rocks;and the shales of the Xiaotangzi Formation are moderately good source rocks. In addition, maceral and carbon isotopes indicate that the kerogen of the Leikoupo and Maantang formations is type Ⅱ and that of the Xiaotangzi Formation is type Ⅱ–Ⅲ. The maturity parameters and the hopane and sterane isomerization suggest that the OM was advanced mature and produced wet–dry gases. One-dimensional modeling of the thermal-burial history suggests that hydrocarbon-generation occurred at 220–60 Ma. The gas components and C–H–He–Ar–Ne isotopes indicate that the oilassociated gases were generated in the Leikoupo and Maantang formations, and then, they mixed with gases from the Xiaotangzi Formation, which were probably contributed by the underlying Permian marine source rocks. Therefore, the deeply-buried Middle–Late Triassic marine source rocks in the western Sichuan depression and in similar basins have a great significant hydrocarbon potential.

Lithological and Si–O–S isotope geochemistry:constraints on the origin and genetic environment of the selenium(Se)-rich siliceous rocks in Enshi,Hubei Province,China

Se-rich black rock series of the Middle and Late Permian system is widely distributed in Enshi Prefecture with an exposed area of 850 km~2,among which the unique Yutangba black rock series independent selenium deposit with industrial mining significance in the world is produced.However,the source and metallogenic mechanisms of Se are still controversial.In general,terrestrial weathering and submarine hydrothermal processes are the main source end members of Si and Se,and the related siliceous rocks record the deposition process of Si and Se from different sources.The study of lithofacies and paleogeography shows that western Hubei belongs to the near eastwest turn of the Yangzi platform in the Middle and Late Permian and becomes an inter-platform basin with nearly north-south direction.Therefore,the comparative study of the Yutangba deposit and the selenium-rich black rock series in the northern Shadi with high selenium content is expected to reveal the provenance evolution of the two sections in space,and further restrict the Se mineralization mechanism in the Enshi basin.From the element geochemistry study,the black rock series in two study areas may have formed in a transitional position of either the continental margin or continental slope,in the process of sedimentary,more terrigenous clastic materials entered.They are rich in lithophile elements V and Cr.δU>1.0,U/Th and V/(V+Ni)ratio indicate that the Se-rich strata of black rock series in the Enshi areas occurred in an anoxic reducing environment and formed in an environment between the ocean basin and the continental margin.From Si-O isotope geochemistry,the original Si source of the study area is thought to relate to a volcanic eruption,which leads to the enrichment of Si in the seawater.The determined values of S isotope in the black rock series of the two study areas both show the characteristics related to organic reduction/biogenic.

Zircon U-Pb geochronology,whole-rock geochemical,and Sr-Nd-Pb isotopic constraints on the timing and origin of Permian and Triassic mafic dykes from eastern North China Craton

This work reports an important episode of extensional,mafic magmatism that impacted the North China Craton(NCC)during the Permo-Triassic and influenced the evolution of this Craton.We sampled 30 representative mafic dykes cropping out in eastern NCC,within the Hebei Province,China.New zircon LA-ICP-MS U-Pb ages,geochemical,and Sr-Nd-Pb isotopic data for these mafic dykes identified them as typical dolerites formed between 211.9±1.3 and 263.9±2.6 Ma.The mafic rocks fall into the alkaline and calc-alkaline series.They are enriched in light rare earth elements,some large ion lithophile elements(e.g.,Rb.Ba,and Sr),K,and Pb,and depleted in Nb,Ta,and Ti.The dykes have high initial 87Sr/86Sr ratios(0.7034-0.7178),negative eNd(t)values(—2.2 to—5.9),and relatively constant initial Pb isotopic ratios,that are EMI-like:(206Pb/204Pb)i=16.39-16.74,(207pb/204pb)j=15.22-15.24,and(208Pb/204Pb)i_=36.66-36.86,respectively.Our results indicate that the Hebei Province dolerites were likely derived from magma gen erated through low-medium degree partial melting(3.0-20%)of an EMI-like garnet-lherzolite mantle source.The parental magmas fractionated olivine,clinopyroxene,and Ti-bearing phases with obvious crustal contamination during rapid ascent and dyke emplacement.Since the possible influence of subduction of the Yangtze Plate has been excluded,we propose a model for the origin of the investigated mafic rocks,involving the Pennian collision between the Siberian Block and the NCC.The mafic dykes of eastern NCC within Hebei Province formed during a period of crustal thinning in response to extension after the early Permian collision.

Mantle plume:the dynamic setting of the origin of Early Paleozoic mafic dykes in Ziyang,Shaanxi Province,Southern Qinling Block,China

The mafic dykes(dolerites)during the Early Paleozoic are widely spread in Langao-Ziyang,southern Qiling Block,and the investigation on these dykes are very important.Previous studies have mainly focused on the Silurian mafic dykes;however,research on the Earlier Paleozoic mafic dykes is relatively weak at present.Therefore,the overall understanding of the mantle source and genetic dynamic setting during the Early Paleozoic in this area is lacking.To study the accurate age and origin of the Early Paleozoic mafic dykes in Ziyang,southern Shaanxi Province,the mafic dykes from dabacunand Qinmingzhai were selected and the petrology,zircon U-Pb chronology,geochemistry,and Sr-Nd-Hf isotopes were studied.Analysis indicates that the mafic dykes studied are mainly composed of dolerite,and they are the products of the Early Ordovician(475.8-480.7 Ma).Furthermore,the dolerites belong to alkaline rock series,and they are characterized by enrichment in LREE,Rb,Ba,Sr,Nb,(87Sr/86Sr)i=0.7020-0.7050,εNd(t)=3.0-4.0),εHf(t)=4.5-12.1,176Hf/177Hf=0.282681-0.282844.This suggests that the mafic dyke were derived from the partial melting of a depleted lithospheric mantle,and the genetic process is mainly controlled by the mantle plume based on the discussion of the genetic model.Furthermore,the genetic process experienced the separation and crystallization of olivine and clinopyroxene at the same time,with little crustal contamination.

Zircon U–Pb dating,geochemical,and Sr–Nd–Pb–Hf isotopic constraints on the age and origin of intermediate to felsic igneous rocks at South Altyn,Xinjiang,China

As a part of a giant trending fault system in the Asian continent and one where a strong zone of left strikeslip fault is present,the Altyn Orogenic belt(AOB)has become an important focus for research.Magmatic rocks are widely distributed across the AOB.However,many investigations have focused primarily on Paleozoic igneous rocks;discussion of Mesozoic related igneous activity is often ignored.Here we present the result of studies of representative diorite and granite rocks outcropping in the AOB,within the Xinjiang Uygur Autonomous Region,South Altyn,China.We present new zircon LA-ICP-MS U-Pb age,geochemical,and Sr-Nd-Pb-Hf isotopic data for these sample suites,identifying them as typical igneous rocks formed between 238±1.5 and 238.8±1.1 Ma.The rocks that we studied fall into the alkaline series,also enriched in light rare earth elements(LREE),some large ion lithophile elements(LILE;e.g.,Rb,Ba,Sr,and K),Pb,Th and U,and depleted in heavy rare earth elements(HREE),Nb,Ta,Hf,and Ti.The granite and diorite have high initial 87Sr/86Sr ratios(0.7062-0.7114),negativeεNd(t)values(-8.8 to-11.3),εHf(t)values(-8.7 to-18.7),and relatively constant Pb isotopic ratios((206-Pb/204Pb)i=6.74-17.884,(207Pb/204Pb)i=15.51-15.58,and(208Pb/204Pb)i=35.36-38.04),respectively.This suggests that the magmas parental to these rocks were generated from the partial melting of the ancient crust.The parental magmas to these rocks experienced a degree of fractionation of plagioclase,K-feldspar,and hornblende,possibly during rapid magma ascent.Based on these studies,we propose a reasonable model for the origin of the investigated rocks from the Xinjiang Uygur Autonomous Region of South Altyn,which involves crustal thickening,lithospheric extension,and asthenosphere upwelling,that induced crustal melting.

Occurrence of Laminated Dolomitic Exhalative Rocks in Continental Rift Basins of Northwest China

Objective Researchers have recently discovered that sublacustrine sedimentary exhalative mechanism associated with volcanism,is the principle way to form lacustrine exhalative rocks.These rocks differentiate themselves from normal sedimentary rocks in their specificpetrofabric and material composition.