A fast acquisition method of DSSS signals using differential decoding and fast Fourier transform

In low earth orbit (LEO) satellite or missile communication scenarios, signals may experience extremely large Doppler shifts and have short visual time. Thus, direct sequence spread spectrum (DSSS) systems should be able to achieve acquisition in a very short time in spite of large Doppler frequencies. However, the traditional methods cannot solve it well. This work describes a new method that uses a differential decoding technique for Doppler mitigation and a batch process of FFT (fast Fourier transform) and IFFT (invert FFT) for the purpose of parallel code phase search by frequency domain correlation. After the code phase is estimated, another FFT process is carried out to search the Doppler frequency. Since both code phase and Doppler frequency domains are searched in parallel, this architecture can provide acquisition fifty times faster than conventional FFT methods. The performance in terms of the probability of detection and false alarm are also analyzed and simulated, showing that a signal-to-noise ratio (SNR) loss of 3 dB is introduced by the differential decoding. The proposed method is an efficient way to shorten the acquisition time with slightly hardware increasing.

A Demonstration of Equivalence between Parameter-Induced and Noise-Induced Stochastic Resonances with Multiplicative and Additive Noises

一个典型双稳态的非线性的系统与趋于增加并且添加剂噪音能由增加添加剂噪音或趋于增加的噪音的紧张生产随机的回声(SR ) ， SR 能被调节系统参数也认识到，这被证明了。我们清楚地表明在导致参数的 SR (PSR ) 和导致噪音的 SR 之间的等价面对趋于增加并且添加剂噪音。由与固定噪音紧张调节几个系统参数，就当它被调节添加剂噪音或趋于增加的噪音认识到， SR 被导致。认识到 PSR 可能有趣噪音紧张什么时候，或什么时候超过回声水平噪音的特征是未知的。[从作者抽象]

Positive Bias Temperature Instability and Hot Carrier Injection of Back Gate Ultra-thin-body In0.53Ga0.47As-on-Insulator n-Channel Metal-Oxide-Semiconductor Field-Effect Transistor

Ultra-thin-body （UTB） In0.53Ga0.47As-on-insulator （In0.53Ga0.47As-OI） structures with thicknesses of 8 and 15nm are realized by transferring epitaxially grown In0.53Ga0.47As layers to silicon substrates with 15-nmthick A12 03 as a buried oxide by using the direct wafer bonding method. Back gate n-channel metal-oxidesemiconductor field-effect transistors （nMOSFETs） are fabricated by using these In0.53Ga0.47As-OI structures with excellent electrical characteristics. Positive bias temperature instability （PBTI） and hot carrier injection （HCI） characterizations are performed for the In0.53Ga0.47As-OI nMOSFETs. It is confirmed that the In0.53Ga0.47 As-OI nMOSFETs with a thinner body thickness suffer from more severe degradations under both PBTI and HCr stresses. Moreover, the different evolutions of the threshold voltage and the saturation current of the UTB In0.53Ga0.47As-OI nMOSFETs may be due to the slow border traps.

Electroforming-Free and Highly Uniform Al2O3 Resistive Random Access Memory by ALD-Based In Situ Hydrogen Plasma Treatment

Al2O3 resistive random access memory （RRAM） with electroforming-free characteristics, high stability and uni- form properties is fabricated. The effect of the in situ hydrogen plasma enhanced treatment on the device performance is investigated. The dominated conduction mechanisms of the devices are ohmic behavior at low fields and space charge limited charge injection at high fields. The great improvement in the device properties is attributed to the hydrogen plasma treatment with the Al2O3 film, and this simple while effective atomic layer deposition based plasma treatment process is expected to be useful for other RRAM material systems as well.

Reduction of Reactive-Ion Etching-Induced Ge Surface Roughness by SF6/CF4Cyclic Etching for Ge Fin Fabrication

An SF6/CF4 cyclic reactive-ion etching （RIE） method is proposed to suppress the surface roughness and to opti- mize the morphology of Ge fin, aiming at the fabrication of superior Ge FinFETs for future CMOS technologies. The surface roughness of the Ge after RIE can be sufficiently reduced by introducing SF6-O2 etching steps into the CF4-O2 etching process, while maintaining a relatively large ratio of vertical etching over horizontal etching of the Ge. As a result, an optimized rms roughness of 0.9nm is achieved for Ge surfaces after the SF6/CF4 cyclic etching with a ratio of greater than four for vertical etching over horizontal etching of the Ge, by using a proportion of 60% for SF6-O2 etching steps.

Dual transponder ranging performance in the presence of oscillator phase noise

A dual transponder carrier ranging method can be used to measure inter-satellite distance with high precision by combining the reference and the to-and-fro measurements. Based on the differential techniques, the oscillator phase noise, which is the main error source for microwave ranging systems, can be significantly attenuated. Further, since the range measurements are derived on the same satellite, the dual transponder ranging system does not need a time tagging system to synchronize the two satellites. In view of the lack of oscillator noise analysis on the dual transponder ranging model, a comprehensive analysis of oscillator noise effects on ranging accuracy is provided. First, the dual transponder ranging system is described with emphasis on the detailed analysis of oscillator noise on measurement precision. Then, a high-fidelity numerical simulation approach based on the power spectrum density of an actual ultra-stable oscillator is carried out in both frequency domain and time domain to support the presented theoretical analysis. The simulation results under different conditions are consistent with the proposed concepts, which makes the results reliable. Besides, the results demonstrate that a high level of accuracy can be achieved by using this oscillator noise cancelation-oriented ranging method.

Adaptive median threshold algorithm used in FDIS of DSSS receivers

For direct sequence spread spectrum （DSSS） receivers, the capability of rejecting narrow-band interference can be significantly improved by a process of frequency-domain interference suppression （FDIS）. The key issue of this process is how to determine a threshold to eliminate interference in the frequency domain, which has been extensively studied. However, these previous methods are tedious or very complex. A simple and ef- ficient algorithm based on medians is proposed. The elimination threshold is only related to the median by a scale factor, which can be obtained by the numerical analysis. Simulation results show that the algorithm provides excellent narrow-band interfer- ence suppression while only slightly degrading the signal-to-noise ratio （SNR）. A one-pass algorithm using logarithmic segmentation is further derived to estimate medians with low computational complexity. Finally, the FDIS is implemented in a field programmable gate array （FPGA） of Xilinx. Experiments are carried out by connecting the FDIS FPGA to a DSSS receiver, and the results show that the receiver has an effective countermeasure for a 60 dB interference-to-signal ratio （ISR）.

Performance Enhancement of Multiuser Passive Time Reversal Communication Based on Space-Time Block Coding

Reliable, with high data rate, acoustic communication in time-valTing, multipath shallow water environment is a hot research topic recently. Passive time reversal communication has shown promising results in improvement of the system performance. In multiuser environment, the system performance is significantly degraded due to the interference among different users. Passive time reversal can reduce such interference by minimizing the cross-correlated version of channel impulse response among users, which can be realized by the well-separated users in depth. But this method also has its shortcomings, even with the absence of relative motion, the minimization sometimes may be impossible because of the time-varying environment. Therefore in order to avoid the limitation of minimizing the cross-correlated channel function, an approach of passive time reversal based on space-time block coding （STBC） is presented in this paper. In addition, a single channel equalizer is used as a pest processing technique to reduce the residual symbol interference. Experimental results at 13 kHz with 2 kHz bandwidth demonstrate that this method has better performance to decrease bit error rate and improve signal to noise ratio, compared with passive time reversal alone or passive time reversal combined with equalization.

Ultracompact,Reflection-Free and High-Efficiency Channel Drop Filters Based on Photonic Crystal Nanobeam Cavities

We propose an ultracompact channel drop filter(CDF)based on photonic crystal nanobeam cavities.The conditions for implementing such an ideal CDF are derived from the temporal coupled-mode equations governing the operation of the CDF.By considering the intercoupling of the two involved nanobeam cavities,some ambiguities of the previous equivalent circuit model analysis are cleared up.Practical configurations on silicon-on-insulator(SOI)for the proposed CDF are suggested with a typical length less than 15μm.Finite difference time domain(FDTD)method calculations show that the proposed filter can achieve drop efficiency higher than 99%without any reflection.Compared to theλ/4-shifted Bragg grating resonators based CDF,the proposed CDF is more compact,high-efficient and reflection-free.It is also easy to implement a low-power tunable filter due to the ultrahigh quality factor Q and ultrasmall modal volume V of the involved photonic crystal nanobeam cavities.

In-package P/G planes analysis and optimization based on transmission matrix method

Power integrity (PI) has become a limiting factor for the chip's overall performance, and how to place in-package decoupling capacitors to improve a chip's PI performance has become a hot issue. In this paper, we propose an improved trans- mission matrix method (TMM) for fast decoupling capacitance allocation. An irregular grid partition mechanism is proposed, which helps speed up the impedance computation and complies better with the irregular power/ground (P/G) plane or planes with many vias and decoupling capacitors. Furthermore, we also ameliorate the computation procedure of the impedance matrix whenever decoupling capacitors are inserted or removed at specific ports. With the fast computation of impedance change, in-package decoupling capacitor allocation is done with an efficient change based method in the frequency domain. Experimental results show that our approach can gain about 5× speedup compared with a general TMM, and is efficient in restraining the noise on the P/G plane.

Optimum weighting-coefficient-pair in inter-carrier interference self-cancellation scheme of OFDM system

As one of the most important components of the wideband wireless access technique, orthogonal frequency division multiplexing (OFDM) has a high usage rate of spectrum and combats inter-symbol interference (ISI) in multi-path fading channel. However, when there are frequency offsets during the signal transmission, the inter-carrier interference (ICI) is introduced, which significantly degrades the performance. The existing ICI self-cancellation schemes such as PCC-OFDM are not optimum to minimize the interference considering both noise and ICI. In this paper, a new metric named SINR (signal-to-interference- and-noise ratio) is proposed. We discuss the optimization issue when a constant frequency offset exists and in time-varying channels. The optimum weighting-coefficient-pair (OWCP) is obtained, which maximizes SINR theoretically through the alternant iteration algorithm. Simulations show that the performance of OWCP-OFDM is better than that of PCC-OFDM, especially when the frequency offset is large. Although the ICI self-cancellation scheme suffers bandwidth inefficiency, from the simulation results we can also see that the performance of OWCP-OFDM is much better than that of the standard OFDM systems with the same bandwidth efficiency when a frequency offset exists. Moreover, since the redundant modulation provides the capability to suppress ICI as well as a receiving SNR gain, it can be considered as exchanging the bandwidth for SNR.

A cross-layer design approach on spectrum allocation and resource scheduling in cognitive PMP networks

We propose the spectrum allocation and resource scheduling algorithms in cognitive point to multipoint (PMP) networks with rapid changes of spectrum opportunities and present a media access control (MAC) protocol based on these algorithms. The objective of spectrum allocation is to make efficient use of the spectrum while maintaining the transceiver synchronization on frequency and time in the network. The objective of resource scheduling is to guarantee the quality of service (QoS) requirements of different kinds of connections and to minimize the total energy consumption in the network as well. By sensing only a small set of possible channels in each slot based on the state transition probability of each channel, our spectrum allocation algorithm achieves high spectrum efficiency in the network. The resource scheduling problem is divided into three sub problems and we derive optimal solutions to these problems by greedy algorithm and convex optimization. The simulation results show that our algorithm can make efficient use of the spectrum and the network resources at a cost of low computational complexity.

Environment map building and localization for robot navigation based on image sequences

SLAM is one of the most important components in robot navigation. A SLAM algorithm based on image sequences captured by a single digital camera is proposed in this paper. By this algorithm, SIFT feature points are selected and matched between image pairs sequentially. After three images have been captured, the environment’s 3D map and the camera’s positions are initialized based on matched feature points and intrinsic parameters of the camera. A robust method is applied to estimate the position and orientation of the camera in the forthcoming images. Finally, a robust adaptive bundle adjustment algorithm is adopted to optimize the environment’s 3D map and the camera’s positions simultaneously. Results of quantitative and qualitative experiments show that our algorithm can reconstruct the environment and localize the camera accurately and efficiently.

A hardware/software co-optimization approach for embedded software of MP3 decoder

In order to improve the efficiency of embedded software running on processor core, this paper proposes a hard-ware/software co-optimization approach for embedded software from the system point of view. The proposed stepwise methods aim at exploiting the structure and the resources of the processor as much as possible for software algorithm optimization. To achieve low memory usage and low frequency need for the same performance, this co-optimization approach was used to optimize embedded software of MP3 decoder based on a 16-bit fixed-point DSP core. After the optimization, the results of decoding 128 kbps, 44.1 kHz stereo MP3 on DSP evaluation platform need 45.9 MIPS and 20.4 kbytes memory space. The optimization rate achieves 65.6% for memory and 49.6% for frequency respectively compared with the results by compiler using floating-point computation. The experimental result indicates the availability of the hardware/software co-optimization approach depending on the algorithm and architecture.

Effects of potential functions on stochastic resonance

In this paper, the effects of a bistable potential function U（x） = -ax2/2＋b｜x＋｜2y/（2y） on stochastic resonance （SR） is discussed. We investigate the effects of index y on the performance of the SR system with fixed parameters a and b, and with fixed potential barriers, respectively. To measure the performance of the SR system in the presence of an aperiodic input, the bit error rate is employed, as is commonly used in binary communications. The numerical simulations strongly support the theoretical results. The goal of this investigation is to explore the effects of the shape of potential functions on SR and give a guidance of nonlinear systems in the application of information processing.

Wavelet Phase Synchronization of Fractional-Order Chaotic Systems

Nowadays,fractional-order systems are attracting more and more attention.There are several ways available for analyzing fractional-order systems,among which wavelet transform is an efficient method for analyzing system dynamics in both time and frequency domains.We investigate the wavelet phase synchronization employing wavelet transform to explore the phase synchronization behaviors of fractional-order chaotic oscillators.We analyze in detail the synchronization behaviors with changes to the coupling strength,the central frequency Ω0,and the time scale of the wavelet.

Effect of Time Delay on Binary Signal Detection via a Bistable System

The effect of time delay on binary signal detection via a bistable system in the presence of white or colored Gaussian noise is investigated. By defining the bit error rate based on the solution of the approximated Fokker- Planck equation, the detector performance is investigated theoretically and is verified by Monte Carlo simulation. It is shown that, when the system parameter or noise intensity is optimally chosen, the increasing time delay generally improves the system performance. It is also shown that it is more difficult to accurately predict the system performance with a larger time delay and correlation time. This may inspire more thorough investigations in cooperative effects of a nonlinear system and time delay on signal processing.

Space Flight Validation of Design and Engineering of the ZDPS-1A Pico-satellite

The ZDPS-1A pico-satellites are the first satellites in China within the 1-10 kg mass range that are successfully operated on orbit. Unlike common pico-satellites, they are designed to be ＂larger but stronger＂ with more powerful platforms and unique payloads so as to bear a better promise for real applications. Through their space flight mission, the functionality and perform- ance of the two flight models are tested on orbit and validated to be mostly normal and in consistency with design and ground tests with only several inconforming occasions. Moreover, they have worked properly on orbit for one year so far, well exceed- ing their life expectancy of three months. Therefore, the space flight mission has reached all its goals, and verified that the design concept and the engineering process of the pico-satellites are sufficient in allowing them the desired functionality and perform- ance in, and the adaption to the launch procedure and the low-Earth orbit space environment. In the foreseeable future, the plat- form together with the design concept and the engineering process of the pico-satellites are expected to be applied to more com- plicated real space applications.

Progresses on microwave remote sensing of land surface parameters

Highly accurate observations at various scales on the land surface are urgently needed for the studies of many areas,such as hydrology,meteorology,and agriculture.With the rapid development of remote sensing techniques,remote sensing has had the capacity of monitoring many factors of the Earth's land surface.Especially,the space-borne microwave remote sensing systems have been widely used in the quantitative monitoring of global snow,soil moisture,and vegetation parameters with their all-weather,all-time observation capabilities and their sensitivities to the characteristics of land surface factors.Based on the electromagnetic theories and microwave radiative transfer equations,researchers have achieved great successes in the microwave remote sensing studies for different sensors in recent years.This article has systematically reviewed the progresses on five research areas including microwave theoretical modeling,microwave inversion on soil moisture,snow,vegetation and land surface temperatures.Through the further enrichment of remote sensing datasets and the development of remote sensing theories and inversion techniques,remote sensing including microwave remote sensing will play a more important role in the studies and applications of the Earth systems.

TABULAR TECHNIQUES FOR OR-COINCIDENCE LOGIC

The map folding method for the conversion between Boolean expression and COC expansions is analyzed. Based on it, the tabular techniques are proposed for the conversion between Boolean expression and COC expansion and for the derivation of GOC expansions with fixed polarities. The Fast Tabular Technique (FTT) for the conversion from the Boolean expression to the GOC expansion with the required polarity is also proposed. The simulative result shows this FTT is faster than others in references because of its inherent parallelism.