Toward a fundamental understanding of the heterogeneous multiphysics behaviors of silicon monoxide/graphite composite anodes

Silicon monoxide(SiO)(silicon[Si]mixed with silicon dioxide[SiO_(2)])/graphite(Gr)composite material is one of the most commercially promising anode materials for the next generation of high-energy-density lithium-ion batteries.The major bottleneck for SiO/Gr composite anode is the poor cyclability arising from the stress/strain behaviors due to the mismatch between two heterogenous materials during the lithiation/delithiation process.To date,a meticulous and quantitative understanding of the highly nonlinear coupling behaviors of such materials is still lacking.Herein,an electro–chemo–mechanics-coupled detailed model containing particle geometries is established.The underlying mechanism of the regulation between SiO and Gr components during electrochemical cycling is quantitatively revealed.We discover that increasing the SiO weight percentage(wt%)reduces the utilization efficiency of the active materials at the same 1C rate charging and enhances the hindering effects of stress-driven flux on diffusion.In addition,the mechanical constraint demonstrates a balanced effect on the overall performance of cells and the local behaviors of particles.This study provides new insights into the fundamental interactions between SiO and Gr materials and advances the investigation methodology for the design and evaluation of next-generation high-energydensity batteries.

Role of the mechanical microenvironment in cancer development and progression

Cross-talk between tumor cells and mechanical stress in the tumor microenvironment has been shown to be involved in carcinogenesis.High mechanical stress in tumors can alter the metabolism and behaviors of cancer cells and cause cancer cells to attain cancer stem-like cell properties,thus driving tumor progression and promoting metastasis.The mechanical signal is converted into a biochemical signal that activates tumorigenic signaling pathways through mechanotransduction.Herein,we describe the physical changes occurring during reprogramming of cancer cell metabolism,which regulate cancer stem cell functions and promote tumor progression and aggression.Furthermore,we highlight emerging therapeutic strategies targeting mechanotransduction signaling pathways.

Virtual Reconstruction of Long Bone Fracture in Car-to-pedestrian Collisions Using Multi-body System and Finite Element Method

Lower limb injures are frequently observed in passenger car traffic accidents.Previous studies of the injuries focus on long bone fractures by using either cadaver component tests or simulations of the long bone kinematics,which lack in-depth study on the fractures in stress analysis.This paper aims to investigate lower limb impact biomechanics in real-world car to pedestrian accidents and to predict fractures of long bones in term of stress parameter for femur,tibia,and fibula.For the above purposes,a 3D finite element(FE) model of human body lower limb(HBM-LL) is developed based on human anatomy.The model consists of the pelvis,femur,tibia,fibula,patella,foot bones,primary tendons,knee joint capsule,meniscus,and ligaments.The FE model is validated by comparing the results from a lateral impact between simulations and tests with cadaver lower limb specimens.Two real-world accidents are selected from an in-depth accident database with detailed information about the accident scene,car impact speed,damage to the car,and pedestrian injuries.Multi-body system(MBS) models are used to reconstruct the kinematics of the pedestrians in the two accidents and the impact conditions are calculated for initial impact velocity and orientations of the car and pedestrian during the collision.The FE model is used to perform injury reconstructions and predict the fractures by using physical parameters,such as von Mises stress of long bones.The calculated failure level of the long bones is correlated with the injury outcomes observed from the two accident cases.The reconstruction result shows that the HBM-LL FE model has acceptable biofidelity and can be applied to predict the risk of long bone fractures.This study provides an efficient methodology to investigate the long bone fracture suffered from vehicle traffic collisions.

Tuning of band gaps for a two-dimensional piezoelectric phononic crystal with a rectangular lattice

In this paper, the elastic wave propagation in a two-dimensional piezoelectric phononic crystal is studied by considering the mechanic-electric coupling. The generalized eigenvalue equation is obtained by the relation of the mechanic and electric fields as well as the Bloch-Floquet theorem. The band structures of both the in-plane and anti-plane modes are calculated for a rectangular lattice by the planewave expansion method. The effects of the lattice constant ratio and the piezoelectricity with different filling fractions are analyzed. The results show that the largest gap width is not always obtained for a square lattice. In some situations, a rectangular lattice may generate larger gaps. The band gap characteristics are influenced obviously by the piezoelectricity with the larger lattice constant ratios and the filling fractions.

Tissue cell differentiation and multicellular evolution via cytoskeletal stiffening in mechanically stressed microenvironments

Evolution of eukaryotes from simple cells to complex multicellular organisms remains a mystery. Our postulate is that cytoskeletal stiffening is a necessary condition for evolution of complex multicellular organisms from early simple eukaryotes. Recent findings show that embryonic stem cells are as soft as primitive eukaryotes-amoebae and that differentiated tissue cells can be two orders of magnitude stiffer than embryonic stem cells. Soft embryonic stem cells become stiff as they differentiate into tissue cells of the complex multicellular organisms to match their microenvironment stiffness. We perhaps see in differentiation of embryonic stem cells (derived from inner cell mass cells) the echo of those early evolutionary events. Early soft unicellular organisms might have evolved to stiffen their cytoskeleton to protect their structural integrity from external mechanical stresses while being able to maintain form, to change shape, and to move.

Experimental investigation on combustion and unregulated emission characteristics of butanol-isomer/gasoline blends

Effects of butanol isomers on characteristics of combustion and emission were studied on PFI SI engine. Experiments were operated under the condition of 3 and 5 bar brake mean effective pressure (BMEP) engine loads and different equivalence ratios (φ=0.83-1.25) with engine speed of 1200 r/min using blends made of 70 vol.% gasoline and 30 vol.% butanol isomers (N30, S30, I30 and T30). The results indicated that compared with gasoline, all butanol isomer blends have higher cylinder pressure. N30 has the highest and most advanced peak pressure, and T30 shows a higher brake specific fuel consumption (BSFC) and lower brake thermal efficiency (BTE). N30 presents a lower UHC emissions and I30 has slightly higher CO emissions than other blends. For unregulated emissions, compared with gasoline, butanol isomer blends have higher acetaldehyde, and N30 produces a higher emission of 1,3-butadiene than other blends. A reduction in benzene, toluene, ethylbenzene and xylene (BTEX) has been found with butanol isomer blends.

Large Deformation Analysis and Synthesis of Elastic Closed-loop Mechanism Made of a Certain Spring Wire Described by Free Curves

Recently novel mechanisms with compact size and without many mechanical elements such as bearing are strongly required for medical devices such as surgical operation devices. This paper describes analysis and synthesis of elastic link mechanisms of a single spring beam which can be manufactured by NC coiling machines. These mechanisms are expected as disposable micro forceps. Smooth Curvature Model（SCM） with 3rd order Legendre polynomial curvature functions is applied to calculate large deformation of a curved cantilever beam by taking account of the balance between external and internal elastic forces and moments. SCM is then extended to analyze large deformation of a closed-loop curved elastic beam which is composed of multiple free curved beams. A closed-loop elastic link is divided into two free curved cantilever beams each of which is assumed as serially connected free curved cantilever beams described with SCM. The sets of coefficients of Legendre polynomials of SCM in all free curved cantilever beams are determined by taking account of the force and moment balance at connecting point where external input force is applied. The sets of coefficients of Legendre polynomials of a nonleaded closed-loop elastic link are optimized to design a link mechanism which can generate specified output motion due to input force applied at the assumed dividing point. For example, two planar micro grippers with a single pulling input force are analyzed and designed. The elastic deformation analyzed with proposed method agrees very well with that calculated with FEM. The designed micro gripper can generate the desired pinching motion. The proposed method can contribute to design compact and simple elastic mechanisms without high calculation costs.

Theoretical and Experimental Analysis on Influence of Revolution Radius in Orbital Drilling

Revolution radius is one of the significant parameters in orbital drilling,which has great influence on many factors,such as the cutting area of front and side cutting edge,undeformed chip geometry,delamination and burr at hole exit side,hole surface roughness,cutting tool force and deflection,chip removal and heat transmission.First,the influence of revolution radius on the factors is discussed theoretically in detail.Analysis results show that big revolution radius can reduce axial cutting force,restrain exit delamination and burr,and improve chip removal and heat transmission.Then,single factor test and orthogonal test are utilized in the two processing methods as machining unidiameter holes with several cutting tools and machining different diameter holes with one tool.Finally,the influence of revolution radius on cutting force and hole machining precision is studied.These results provide a profound foundation for future optimization of cutting control parameters.

Material and structural instabilities of single-wall carbon nanotubes

The nonlinear atomistic interactions usually involve softening behavior. Instability resulting directly from this softening are called the material instability, while those unrelated to this softening are called the structural instability. We use the finite-deformation shell theory based on the interatomic potential to show that the tension instability of single-wall carbon nanotubes is the material instability, while the compression and torsion instabilities are structural instability.

Local topography-induced pressure gradient effects on the wake and power output of a model wind turbine

Wind-tunnel experiments were performed to study the effect of favorable and adverse constant pressure gradients(PG)from local changes in the topography right downwind of a model wind turbine.Particle image velocimetry was used to characterize the near and intermediate wake regions.We explored five scenarios,two favorable,two adverse PG,and a case with negligible PG.Results show that the PGs induce a wake deflection and modulate the wake.They imposed a relatively small impact on the turbulence kinetic energy and kinematic shear stress but a comparatively dominant effect on the bulk flow on the flow recovery.Based on this,a simple formulation is used to describe the impact of PG on the wake.We modeled the base flow through a linearized perturbation method;the wake is obtained by solving a simplified,integrated streamwise momentum equation.This approach reasonably estimated the flow profile and PG-induced power output variations.

Mechanical Analysis and Performance Optimization for the Lunar Rover’s Vane-Telescopic Walking Wheel

It is well-known that optimizing the wheel system of lunar rovers is essential.However,this is a difficult task due to the complex terrain of the moon and limited resources onboard lunar rovers.In this study,an experimental prototype was set up to analyze the existing mechanical design of a lunar rover and improve its performance.First,a new vane-telescopic walking wheel was proposed for the lunar rover with a positive and negative quadrangle suspension,considering the complex terrain of the moon.Next,the performance was optimized under the limitations of preserving the slope passage and minimizing power consumption.This was achieved via analysis of the wheel force during movement.Finally,the effectiveness of the proposed method was demonstrated by several simulation experiments.The newly designed wheel can protrude on demand and reduce energy consumption;it can be used as a reference for lunar rover development engineering in China.

Mechanics and mechanotransduction of tumorigenic cells

Despite significant progress in cancer research during the past decades,yet there are no major breakthroughs that can be translated into major benefits for the general public in terms of treatment or therapy for the complex neoplastic diseases,especially for the malignant solid tumors.This depressing but indisputable fact leads to a call for new ideas to target tumor metastasis by editors of Nature Medicine[1].The real problems are that the fundamental issues of transformation and malignancy in vivo are poorly understood.In a recent review on cancer,

Countermeasure Against Regenerative and Forced Chatter of Flexible Workpieces in Milling Processs Using Bi-directional Excitation

A novel extended methodology for chatter suppression in milling process by applying external forced vibrations to the workpiece in two orthogonal directions which are the feed and cross-feed directions.Both the regenerative and forced chatter suppression during the milling process of flexible workpieces are investigated.Here,the workpiece is subject to a sinusoidal periodic force in the feed direction to disrupt the regenerative effect.Additionally,to minimize the forced chatter,the workpiece is subject to the periodic excitation force in cross-feed direction.This force is proportional to the magnitude of the estimated cutting force in cross-feed direction and has a phase opposite to the cutting force to minimize the vibration amplitudes.The effectiveness of the proposed method is evaluated numerically and experimentally,for the spindle speed located in both the local minima and local maxima of the stability lobe diagram.The numerical simulations indicate significant suppression effect in terms of vibration amplitudes,resulting in suppression of both the regenerative chatter and the forced chatter.Experiments were conducted by using a workpiece-mounted active stage composed of flexure hinges and driven by piezoelectric actuators.The experimental results agree qualitatively with the numerical simulations.The proposed method indicates a remarkable vibration reduction effect for both regenerative and forced chatters.

Consecutive Impact Loading and Preloading Effect on Stiffness of Woven Synthetic-Fiber Rope

We studied consecutive impact loading on woven high-modulus polyethylene rope, which is used in robotics fields. An impact tester was developed to conduct the experiments. Five consecutive impact loads (five drops) were applied to the rope and the stiffness of the loading part that corresponds to each drop was evaluated. The stiffness of the woven ropes was affected strongly by consecutive impact loading. The change in stiffness is undesirable in some applications such as in robotic fields. Therefore, we have proposed a method that can optimize changes in stiffness by applying a preload before impact testing (preload treatment). The experimental results show that preload is an efficient way to reduce changing rope stiffness. We have also proposed an empirical equation that can estimate the rope stiffness after arbitrary preload treatment, and this equation is a function of the number of drops and the static preload level. The equation can be used to determine the preload treatment conditions to stabilize the stiffness of the woven ropes before they are used in engineering fields.

Proposal and Verification of Simultaneous Measurement Method for Three Thermoelectric Properties with Film-Type Thermocouple Probe

A new simultaneous measurement method for the measurement of the three thermoelectric properties with a film-type thermocouple probe was proposed. Seebeck coefficient was measured using the steady-state condi-tion of the differential method. The electrical resistivity was measured us-ing the four-probe method and the thermal diffusivity is measured using the periodic heating method. The effectiveness of the proposed method was verified using constantan as a reference material. After describing the effectiveness of the method, the measurement of three thermoelectric properties of Bi0.3Sb1.7Te3, which is a thermoelectric material, was per-formed.

Targeting the mechano-microenvironment and liver cancer stem cells:a promising therapeutic strategy for liver cancer

Over the past 2 decades,cancer stem cells(CSCs)have been identified as the root cause of cancer occurrence,progression,chemoradioresistance,recurrence,and metastasis.Targeting CSCs is a novel therapeutic strategy for cancer management and treatment.Liver cancer(LC)is a malignant disease that can endanger human health.Studies are increasingly suggesting that changes in the liver mechanical microenvironment are a primary driver triggering the occurrence and development of liver cancer.In this review,we summarize current understanding of the roles of the liver mechano-microenvironment and liver cancer stem cells(LCSCs)in liver cancer progression.We also discuss the relationship between the mechanical heterogeneity of liver cancer tissues and LCSC recruitment and metastasis.Finally,we highlight potential mechanosensitive molecules in LCSCs and mechanotherapy in liver cancer.Understanding the roles and regulatory mechanisms of the mechano-microenvironment and LCSCs may provide fundamental insights into liver cancer progression and aid in further development of novel therapeutic strategies.

Toward tunable shape memory effect of NiTi alloy by grain size engineering:A phase field study

The inelastic deformations of shape memory alloys(SMAs)always show poor controllability due to the avalanche-like martensite transformation,and the effective control for the deformation of precision de-vices has been not yet mature.In this work,the phase field method was used to investigate the shape memory effects(SMEs)of NiTi SMAs undergoing grain size(GS)engineering,to obtain tunable one-way and stress-assisted two-way SMEs(OWSME and SATWSME).The OWSME and SATWSME of the systems with various gradient-nanograin structures and bimodal grain structure,as well as that with geometric gradients were simulated.The simulated results indicate that due to the GS dependences of martensite transformation and reorientation,the occurrence and expansion of martensite reorientation,martensite transformation and its reverse can be efficaciously controlled via the GS engineering.When combining the GS engineering and geometric gradient design,since the effects of GS and stress gradient can be su-perimposed or competing,and the responses of martensite reorientation,martensite transformation and its reverse to this are different,the OWSME and SATWSME of the geometrically graded systems with various nanograin structures can exhibit different improvements in controllability.In short,the reorienta-tion hardening modulus during OWSME is increased and the transformation temperature window during SATWSME is widened by GS engineering,indicating the improved controllability of SMEs.The optimal GS engineering schemes revealed in this work provide the basic reference and guidance for designing tun-able SMEs and producing NiTi-based driving devices catering to desired functional performance in various engineering fields.

Effect of Texture on the Grain-Size-Dependent Functional Properties of NiTi Shape Memory Alloys and Texture Gradient Design:A Phase Field Study

Texture is inevitably introduced during the manufacturing of most NiTi shape memory alloys(SMAs),and the textured nanocrystalline NiTi has been extensively employed in engineering.However,the effect of texture,and the joint effect of grain size(GS)and texture on the functional properties of NiTi SMAs and the corresponding microscopic mechanisms have not been clearly understood yet.In this work,based on the phase field method,the effect of texture on the GS-dependent functional properties of NiTi SMAs,including super-elasticity(SE),one-way shape memory effect(OWSME),and stress-assisted two-way shape memory effect(SATWSME),is investigated,and the corresponding microscopic mechanisms are revealed.Moreover,the samples with discrete geometrical gradients and/or texture gradients are designed to achieve graded functional properties.The simulation results indicate that the dependence of functional properties on texture is due to the effect of crystallographic orientation on martensite transformation and reorientation,which can lead to different inelastic strains.In the designed samples with texture gradients,the stress–strain responses of sheets with various textures are different,allowing for the coordination of overall deformation of the sample by combining such sheets,with varying inelastic deformation degrees.Thus,the overall response of the sample differs from that without texture gradient,leading to the achievement of graded functional properties.The simulation results and new findings in this work contribute to a deeper understanding of the effects of texture,GS,and their interaction on the functional properties of SMAs,and provide valuable reference for the design and development of SMA-based devices with desired functional properties.

Application of empirical mode decomposition in early diagnosis of magnetic memory signal

In order to eliminate noise interference of metal magnetic memory signal in early diagnosis of stress concentration zones and metal defects, the empirical mode decomposition method combined with the magnetic field gradient characteristic was proposed. A compressive force periodically acting upon a casing pipe led to appreciable deformation, and magnetic signals were measured by a magnetic indicator TSC-1M-4. The raw magnetic memory signal was first decomposed into different intrinsic mode functions and a residue, and the magnetic field gradient distribution of the subsequent reconstructed signal was obtained. The experimental results show that the gradient around 350 mm represents the maximum value ignoring the marginal effect, and there is a good correlation between the real maximum field gradient and the stress concentration zone. The wavelet transform associated with envelop analysis also exhibits this gradient characteristic, indicating that the proposed method is effective for early identifying critical zones.

WAVE LOCALIZATION IN RANDOMLY DISORDERED PERIODIC PIEZOELECTRIC RODS WITH INITIAL STRESS

The elastic wave localization in disordered periodic piezoelectric rods with initial stress is studied using the transfer matrix and Lyapunov exponent method. The electric field is approximated as quasi-static. The effects of the initial stress on the band gap characteristics are investigated. The numerical calculations of localization factors and localization lengths are performed. It can be observed from the results that the band structures can be tuned by exerting the suitable initial stress. For different values of the piezoelectric rod length and the elastic constant, the band structures and the localization phenomena are very different. Larger disorder degree can lead to more obvious localization phenomenon.