This study presents a facile and rapid method for synthesizing novel Layered Double Hydroxide(LDH)nanoflakes,exploring their application as a photocatalyst,and investigating the influence of condensed phosphates'g...This study presents a facile and rapid method for synthesizing novel Layered Double Hydroxide(LDH)nanoflakes,exploring their application as a photocatalyst,and investigating the influence of condensed phosphates'geometric linearity on their photocatalytic properties.Herein,the Mg O film,obtained by plasma electrolysis of AZ31 Mg alloys,was modified by growing an LDH film,which was further functionalized using cyclic sodium hexametaphosphate(CP)and linear sodium tripolyphosphate(LP).CP acted as an enhancer for flake spacing within the LDH structure,while LP changed flake dispersion and orientation.Consequently,CP@LDH demonstrated exceptional efficiency in heterogeneous photocatalysis,effectively degrading organic dyes like Methylene blue(MB),Congo red(CR),and Methyl orange(MO).The unique cyclic structure of CP likely enhances surface reactions and improves the catalyst's interaction with dye molecules.Furthermore,the condensed phosphate structure contributes to a higher surface area and reactivity in CP@LDH,leading to its superior photocatalytic performance compared to LP@LDH.Specifically,LP@LDH demonstrated notable degradation efficiencies of 93.02%,92.89%,and 88.81%for MB,MO,and CR respectively,over a 40 min duration.The highest degradation efficiencies were observed in the case of the CP@LDH sample,reporting 99.99%for MB,98.88%for CR,and 99.70%for MO.This underscores the potential of CP@LDH as a highly effective photocatalyst for organic dye degradation,offering promising prospects for environmental remediation and water detoxification applications.展开更多
MXenes,the most recent addition to the 2D material family,have attracted significant attention owing to their distinctive characteristics,including high surface area,conductivity,surface characteristics,mechanical str...MXenes,the most recent addition to the 2D material family,have attracted significant attention owing to their distinctive characteristics,including high surface area,conductivity,surface characteristics,mechanical strength,etc.This review begins by presenting MXenes,providing insights into their structural characteristics,synthesis methods,and surface functional groups.The review covers a thorough analysis of MXene surface properties,including surface chemistry and termination group impacts.The properties of MXenes are influenced by their synthesis,which can be fluorine-based or fluorinedependent.Fluorine-based synthesis techniques involve etching with fluorine-based reagents,mainly including HF or LiF/HCl,while fluorine-free methods include electrochemical etching,chemical vapor deposition(CVD),alkaline etching,Lewis acid-based etching,etc.These techniques result in the emergence of functional groups such as-F,-O,-OH,-Cl,etc.on the MXenes surface,depending on the synthesis method used.Properties of MXenes,such as electrical conductivity,electronic properties,catalytic activity,magnetic properties,mechanical strength,and chemical and thermal stability,are examined,and the role of functional groups in determining these properties is explored.The review delves into the diverse applications of MXenes,encompassing supercapacitors,battery materials,hydrogen storage,fuel cells,electromagnetic interference(EMI) shielding,pollutant removal,water purification,flexible electronics,sensors,additive manufacturing,catalysis,biomedical and healthcare fields,etc.Finally,this article outlines the challenges and opportunities in the current and future development of MXenes research,addressing various aspects such as synthesis scalability,etching challenges,and multifunctionality,and exploring novel applications.The review concludes with future prospects and conclusions envisioning the impact of MXenes on future technologies and innovation.展开更多
Zinc-air batteries(ZABs)are gaining attention as an ideal option for various applications requiring high-capacity batteries,such as portable electronics,electric vehicles,and renewable energy storage.ZABs offer advant...Zinc-air batteries(ZABs)are gaining attention as an ideal option for various applications requiring high-capacity batteries,such as portable electronics,electric vehicles,and renewable energy storage.ZABs offer advantages such as low environmental impact,enhanced safety compared to Li-ion batteries,and cost-effectiveness due to the abundance of zinc.However,early research faced challenges due to parasitic reactions at the zinc anode and slow oxygen redox kinetics.Recent advancements in restructuring the anode,utilizing alternative electrolytes,and developing bifunctional oxygen catalysts have significantly improved ZABs.Scientists have achieved battery reversibility over thousands of cycles,introduced new electrolytes,and achieved energy efficiency records surpassing 70%.Despite these achievements,there are challenges related to lower power density,shorter lifespan,and air electrode corrosion leading to performance degradation.This review paper discusses different battery configurations,and reaction mechanisms for electrically and mechanically rechargeable ZABs,and proposes remedies to enhance overall battery performance.The paper also explores recent advancements,applications,and the future prospects of electrically/mechanically rechargeable ZABs.展开更多
The formation of inorganic-organic hybrids(IOH)on the metallic substrates would play a decisive role in improving their structural and functional features.In this work,the growth of organic coating(OC)consisting of co...The formation of inorganic-organic hybrids(IOH)on the metallic substrates would play a decisive role in improving their structural and functional features.In this work,the growth of organic coating(OC)consisting of coumarin-3-carboxylic acid(3-CCA)and albumin(ALB)on the inorganic layer(IC),produced by plasma electrolysis of AZ31 Mg alloy,led to enabling organically synergistic reactions on the porous inorganic surface,forming a flake-like structure sealing the structural defects of IC.Synergistic actions between OC and IC endow the flake-like structures with chemical protection and photocatalytic performance.Upon contact with a corrosive solution,the IOH layer possesses stable morphologies that delay the corrosive degradation of the whole structure.The electrochemical stability of the sample produced by immersion IC in the organic solution for 10 h(IOH2 sample)was superior to the other samples as it had the lowest corrosion current density(1.69×10^(−10)A·cm^(−2))and the highest top layer resistance(1.2×10^(7)Ω·cm^(2)).Moreover,the IOH layer can photodegrade the organic pollutants in model wastewater,where the highest photocatalytic efficiency of 99.47%was found in the IOH2 sample.Furthermore,computational calculations were performed to assess the relative activity of different parts of the ALB and 3-CCA structures,which provide helpful information into the formation mechanism of the IOH materials.展开更多
This work looked into the influence of the sealing treatment on the structural feature and electrochemical response of AZ31 Mg alloy coated via plasma electrolytic oxidation(PEO).Here,the inorganic layers produced by ...This work looked into the influence of the sealing treatment on the structural feature and electrochemical response of AZ31 Mg alloy coated via plasma electrolytic oxidation(PEO).Here,the inorganic layers produced by PEO in an alkaline-phosphate electrolyte were subsequently immersed for different periods in cold(60°C)and hot(100°C)aqueous solutions containing either 1 or 3 gr of cobalt nitrate hexahydrate in the presence of hydrogen peroxide as an initiator.The results showed that the sealing treatments in the hot solutions could trigger the hydration reactions of PEO coating which would largely assist the surface incorporation of Co_(3)O_(4)into the coating.In contrast,the sealing in cold solutions led to less compact coatings,which was attributed to the fact the hydration reactions would be restricted at 60°C.A nearly fully sealed coating with a porosity of~0.5%was successfully formed on the sample immersed in the hot solution containing 1 gr of cobalt nitrate hexahydrate.Thus,the electrochemical stability of this fully sealed coating was superior to the other samples as it had the lowest corrosion current density(4.71×10^(-10)A·cm^(-2))and the highest outer layer resistance(3.81×10^(7)Ω·cm^(2)).The composite coatings developed in this study are ideal for applications requiring high electrochemical stability.展开更多
Methanol cross-over effects from the anode to the cathode are important parameters for reducing catalytic performance in direct methanol fuel cells.A promising candidate catalyst for the cathode in direct methanol fue...Methanol cross-over effects from the anode to the cathode are important parameters for reducing catalytic performance in direct methanol fuel cells.A promising candidate catalyst for the cathode in direct methanol fuel cells must have excellent activity toward oxygen reduction reaction and resistance to methanol oxidation reaction.This review focuses on the methanol tolerant noble metal-based electrocatalysts,including platinum and palladium-based alloys,noble metal–carbon based composites,transition metal-based catalysts,carbon-based metal catalysts,and metal-free catalysts.The understanding of the correlation between the activity and the synthesis method,electrolyte environment and stability issues are highlighted.For the transition metal-based catalyst,their activity,stability and methanol tolerance in direct methanol fuel cells and comparisons with those of platinum are particularly discussed.Finally,strategies to enhance the methanol tolerance and hinder the generation of mixed potential in direct methanol fuel cells are also presented.This review provides a perspective for future developments for the scientist in selecting suitable methanol tolerate catalyst for oxygen reduction reaction and designing high-performance practical direct methanol fuel cells.展开更多
Meeting the demands of complex and advanced applications requires the development of high-performance hybrid materials with unique properties.However,the integration of polymeric frameworks with MgO/WO_(3) composite l...Meeting the demands of complex and advanced applications requires the development of high-performance hybrid materials with unique properties.However,the integration of polymeric frameworks with MgO/WO_(3) composite layers faces challenges due to the lack of understanding of the formation mechanism and the challenge of determining the impact of self-assembled architecture on anticorrosive properties.In this study,we aimed to enhance the corrosion resistance of the MgO layer produced by plasma electrolysis(PE)of AZ31 Mg alloy by incorporating WO_(3) with partially phosphorated poly(vinyl alcohol)(PPVA).Two types of porous MgO layers were produced using the PE process with an alkaline-phosphate electrolyte,one with and one without WO_(3) nanoparticles,which were subsequently immersed in an aqueous solution of PPVA.Incorporating PPVA into the WO_(3)-MgO layer resulted in hybrids being deposited in a fragmented manner,creating a“laminar reef-like structure”that sealed most of the structural defects in the layer.The PPVA-sealed WO_(3)-based coating exhibited superior corrosion resistance compared to the other samples.Computational analyses were employed to explore the mechanism underlying the formation of PPVA/WO_(3) hybrids on the MgO layer.These findings suggest that PPVA-WO_(3)-MgO hybrid coatings can potentially improve corrosion resistance in various fields.展开更多
The self-assembly of hybrid inorganic-organic materials on stationary platforms plays a critical role in improving their structural stability and wide usability.In this work,a novel two-step hydrothermal approach is p...The self-assembly of hybrid inorganic-organic materials on stationary platforms plays a critical role in improving their structural stability and wide usability.In this work,a novel two-step hydrothermal approach is proposed for synthesizing stable and advanced hybrid coatings on metal-oxide platforms through the surface modification of layered double hydroxide(LDH)films using novel metal-organic frameworks(MOFs).Initially,Mg-Al LDH nanocontainers,grown on a magnesium oxide layer produced through plasma electrolytic oxidation(PEO)of AZ31 Mg alloy substrate,were intercalated with cobalt via an oxidation route,providing the metallic coordination center for the MOF formation.In the subsequent step,a pioneering technique is introduced,utilizing tryptophan as the organic linker for the first time at a pH of 10.The self-assembly of cobalt-tryptophan complex,driven by the strong bonding between electrophilic sites of monomers and nucleophilic sites,facilitated the formation of a MOF network having a cloud-like structure on the surface of MgAl LDH's film.The resulting MOF-LDH encapsulation containers demonstrate exceptional electrochemical stability when exposed to a 3.5 wt.%NaCl solution,surpassing the performance of PEO and pure LDH coatings.This enhanced stability is attributed to the development of a dense top layer and a stable composition within the self-assembled MOF,effectively sealing flaws and preventing the infiltration of corrosive ions into the underlying metallic substrate.The formation mechanism of MOFs on LDH galleries is investigated using density functional theory calculations.展开更多
Magnesium(Mg)alloys are lightweight materials with excellent mechanical properties,making them attractive for various applications,including aerospace,automotive,and biomedical industries.However,the practical applica...Magnesium(Mg)alloys are lightweight materials with excellent mechanical properties,making them attractive for various applications,including aerospace,automotive,and biomedical industries.However,the practical application of Mg alloys is limited due to their high susceptibility to corrosion.Plasma electrolytic oxidation(PEO),or micro-arc oxidation(MAO),is a coating method that boosts Mg alloys'corrosion resistance.However,despite the benefits of PEO coatings,they can still exhibit certain limitations,such as failing to maintain long-term protection as a result of their inherent porosity.To address these challenges,researchers have suggested the use of inhibitors in combination with PEO coatings on Mg alloys.Inhibitors are chemical compounds that can be incorporated into the coating or applied as a post-treatment to further boost the corrosion resistance of the PEO-coated Mg alloys.Corrosion inhibitors,whether organic or inorganic,can act by forming a protective barrier,hindering the corrosion process,or modifying the surface properties to reduce susceptibility to corrosion.Containers can be made of various materials,including polyelectrolyte shells,layered double hydroxides,polymer shells,and mesoporous inorganic materials.Encapsulating corrosion inhibitors in containers fully compatible with the coating matrix and substrate is a promising approach for their incorporation.Laboratory studies of the combination of inhibitors with PEO coatings on Mg alloys have shown promising results,demonstrating significant corrosion mitigation,extending the service life of Mg alloy components in aggressive environments,and providing self-healing properties.In general,this review presents available information on the incorporation of inhibitors with PEO coatings,which can lead to improved performance of Mg alloy components in demanding environments.展开更多
Carbazole moiety-based 2PACz([2-(9H-carbazol-9-yl)ethyl]phosphonic acid)self-assembled monolayers(SAMs)are excellent hole-selective contact(HSC)materials with abilities to excel the charge-transferdynamics of perovski...Carbazole moiety-based 2PACz([2-(9H-carbazol-9-yl)ethyl]phosphonic acid)self-assembled monolayers(SAMs)are excellent hole-selective contact(HSC)materials with abilities to excel the charge-transferdynamics of perovskite solar cells(PSCs).Herein,we report a facile but powerful method to functionalize the surface of 2PACz-SAM,by which reproducible,highly stable,high-efficiency wide-bandgap PSCs can be obtained.The 2PACz surface treatment with various donor number solvents improves assembly of 2PACz-SAM and leave residual surface-bound solvent molecules on 2PACz-SAM,which increases perovskite grain size,retards halide segregation,and accelerates hole extraction.The surface functionalization achieves a high power conversion efficiency(PCE)of 17.62%for a single-junction wide-bandgap(~1.77 e V)PSC.We also demonstrate a monolithic all-perovskite tandem solar cell using surfaceengineered HSC,showing high PCE of 24.66%with large open-circuit voltage of 2.008 V and high fillfactor of 81.45%.Our results suggest this simple approach can further improve the tandem device,when coupled with a high-performance narrow-bandgap sub-cell.展开更多
This study presents morphological and structural variations of K-Feldspar mineral after acid treatment. Both organic and inorganic acids such as C2H2O4, HCl, HNO3 and H2SO4 were employed for this purpose. Another aim ...This study presents morphological and structural variations of K-Feldspar mineral after acid treatment. Both organic and inorganic acids such as C2H2O4, HCl, HNO3 and H2SO4 were employed for this purpose. Another aim of this study was to find an optimum experimental condition for iron(Fe) removal with a minimum damage on the structure of K-Feldspar in which high whiteness index is obtained. The effect of different parameters such as concentration, pH and temperature on the final structure of this mineral was investigated. To find out the chemical composition of powder, XRF was utilized. FTIR, XRD and SEM were employed to study the structure of mineral. Spectrophotometry was chosen to analyze whiteness index of powder after acid treatment. It was found that O—Al—O bond at 647 cm^-1 for H2SO4 and HNO3 treated sample disappeared. However, HCl and C2H2O4 were ineffective at this band. In addition, the results revealed an increase in K-Feldspar content, a decrease in Fe content, an increase in whiteness index and no significant structural change for C2H2O4 leached sample. Whiteness index of 91% was obtained for C2H2O4 leached sample with the pH of 2.5 to 3 at temperature of 50 ℃ and during 1 h.展开更多
Exploring novel versatile electrode materials with outstanding electrochemical performance is the key to the development of advanced energy conversion and storage devices.In this work,we aim to construct new-fangled o...Exploring novel versatile electrode materials with outstanding electrochemical performance is the key to the development of advanced energy conversion and storage devices.In this work,we aim to construct new-fangled one-dimensional(1D)quasi-layered patronite vanadium tetrasulfide(VS_(4))nanostructures by using different sulfur sources,namely thiourea,thioacetamide,and L-cysteine through an ethyleneaminetetraacetic-acid(EDTA)-mediated solvothermal process.The as-prepared VS4exhibits several unique morphologies such as urchin,fluffy nanoflower,and polyhedron with appropriate surface areas.Among the prepared nanostructures,the VS_(4)-1@NF nanostructure exhibited excellent electrochemical properties in 6 M KOH solution,and we explored its redox electrochemistry in detail.The asprepared VS_(4)-1@NF electrode exhibited battery-type redox characteristics with the highest capacity of280 C g^(-1)in a three-electrode assembly.Moreover,it offered a capacity of 123 F g^(-1)in a hybrid twoelectrode set-up at 1 A g^(-1)with the highest specific energy and specific power of 38.5 W h kg^(-1)and750 W kg^(-1),respectively.Furthermore,to ensure the practical applicability and real-world performance of the prepared hybrid AC@NF//VS_(4)-1@NF cell,we performed a cycling stability test with more than 5,000galvanostatic charge–discharge cycles at 2 A g^(-1),and the cell retained around 84.7%of its capacitance even after 5,000 cycles with a CE of 96.1%.展开更多
Mg and its alloys have been introduced as promising biodegradable materials for biomedical implant applications due to their excellent biocompatibility, mechanical behavior, and biodegradability. However, their suscep...Mg and its alloys have been introduced as promising biodegradable materials for biomedical implant applications due to their excellent biocompatibility, mechanical behavior, and biodegradability. However, their susceptibility to rapid corrosion within the body poses a significant challenge and restricts their applications. To overcome this issue, various surface modification techniques have been developed to enhance the corrosion resistance and bioactivity of Mg-based implants. PEO is a potent technique for producing an oxide film on a surface that significantly minimizes the tendency to corrode. However, the inevitable defects due to discharges and poor biological activity during the coating process remain a concern. Therefore, adding suitable particles during the coating process is a suitable solution. Hydroxyapatite(HAp)has attracted much attention in the development of biomedical applications in the scientific community. HAp shows excellent biocompatibility due to its similarity in chemical composition to the mineral portion of bone. Therefore, its combination with Mg-based implants through PEO has shown significant improvements in their corrosion resistance and bioactivity. This review paper provides a comprehensive overview of the recent advances in the preparation, characterization, corrosion behavior and bioactivity applications of HAp particles on Mg-based implants by PEO.展开更多
A novel inorganic-organic layer with outstanding corrosion resistance in a 3.5wt.% NaCl solution was fabricated by taking advantage of the unique interactions between coumarin (COM) molecules and the porous layer form...A novel inorganic-organic layer with outstanding corrosion resistance in a 3.5wt.% NaCl solution was fabricated by taking advantage of the unique interactions between coumarin (COM) molecules and the porous layer formed on Mg alloy. To achieve this aim, the AZ31 Mg alloy coated via microarc oxidation (MAO) coating was placed in an ethanolic solution of COM for 6 and 12 h at 25 ℃. By reducing the surface area exposed to the corrosive species, the donor-acceptor complexes produced by the particular interactions between the COM and MAO surface would successfully prevent the corrosion of Mg alloy substrate. The MAO layer would provide the ideal sites for the charge-transfer-induced physical and chemical locking, leading to uneven organic layer nucleation and crystal growth with a thatch-like structure. To evaluate the formation mechanism of such hybrid composites and highlight the key bonding modes between the COM and MAO, theoretical simulations were conducted.展开更多
Engineering point defects such as metal and oxygen vacancies play a crucial role in manipulating the electrical,optical,and catalytic properties of oxide semiconductors for solar water splitting.Herein,we synthesized ...Engineering point defects such as metal and oxygen vacancies play a crucial role in manipulating the electrical,optical,and catalytic properties of oxide semiconductors for solar water splitting.Herein,we synthesized nanoporous CuBi_(2)O_(4)(np-CBO)photocathodes and engineered their surface point defects via rapid thermal processing(RTP)in controlled atmospheres(O_(2),N_(2),and vacuum).We found that the O_(2)-RTP treatment of np-CBO increased the charge carrier density effectively without hampering the nanoporous morphology,which was attributed to the formation of copper vacancies(VCu).Further analyses revealed that the amounts of oxygen vacancies(Vo)and Cu^(1+)were reduced simultaneously,and the relative electrochemical active surface area increased after the O_(2)-RTP treatment.Notably,the point defects(VC_(u),Cu^(1+),and Vo)regulated np-CBO achieved a superb water-splitting photocurrent density of-1.81 m A cm^(-2) under simulated sunlight illumination,which is attributed to the enhanced charge transport and transfer properties resulting from the regulated surface point defects.Finally,the reversibility of the formation of the point defects was checked by sequential RTP treatments(O_(2)-N_(2)-O_(2)-N_(2)),demonstrating the strong dependence of photocurrent response on the RTP cycles.Conclusively,the surface point defect engineering via RTP treatment in a controlled atmosphere is a rapid and facile strategy to promote charge transport and transfer properties of photoelectrodes for efficient solar water-splitting.展开更多
Recently,developing bioactive and biocompatible materials based on Mg and Mg-alloys for implant applications has drawn attention among researchers owing to their suitable body degradability.Implementing Mg and its all...Recently,developing bioactive and biocompatible materials based on Mg and Mg-alloys for implant applications has drawn attention among researchers owing to their suitable body degradability.Implementing Mg and its alloys reduces the risk of long-term incompatibility with tissues because of their close mechanical properties and no need for re-operation to remove the implant.Nevertheless,the degradation rate of the implant needs to be controlled because production of hydrogen gas and accumulation of its bubbles increases local pH around the implants.To confine the integrity of implants and the body,the corrosion concern in the body fluid requires to be addressed.Surface modification as one of the effective strategies can improve corrosion resistance.Besides,it creates a suitable surface for bone grafting and cell growth.The development of proper surface-coated implants needs appropriate techniques and approaches.Plasma electrolytic oxidation(PEO)coating can provide long-term protection by providing a ceramic layer and improving the implant’s biocompatibility.Herein,a general review of in-vivo and in-vitro evaluation of PEO coatings on Mg and Mg-alloys has been carried out.Recent advances in surface modification on Mg and Mg-alloys have been discussed,however,the need for reliable laboratory models to predict in-vivo degradation is still valid.展开更多
The unique interactions between hexadecanoic acid(HA)and albumin(ALB)molecules on the surface of the porous layer of AZ31 Mg alloy were exploited to fabricate a novel hybrid composite film with excellent electrochemic...The unique interactions between hexadecanoic acid(HA)and albumin(ALB)molecules on the surface of the porous layer of AZ31 Mg alloy were exploited to fabricate a novel hybrid composite film with excellent electrochemical stability in a 3.5 wt.%Na Cl solution.Herein,the inorganic layer(IL)obtained by plasma electrolytic oxidation of AZ31 Mg alloy in an alkaline-phosphate-WO_(3)electrolyte was soaked in an organic solution composed of ALB and HA for 10 and 24 h at 60℃.Although albumin and HA may coexist on the same surface of IL,the higher reactivity of ALB molecules would prevent the formation of a thick layer of HA.The donor-acceptor complexes formed due to the unique interactions between ALB and/or HA and IL surface would reduce the area exposed to the corrosive species which in turn would efficiently protect the substrate from corrosion.The porous structure of the IL would provide preferable sites for the physical and chemical locking triggered by charge-transfer phenomena,leading to the inhomogeneous nucleation and crystal growth of a flowery flakes-like organic layer.DFT calculations were performed to reveal the primary bonding modes between the ALB,HA,and IL and to assess the mechanistic insights into the formation of such novel hybrid composites.展开更多
Cr Fe Ni Cu)_(100-x)Ti_(x)(x=0,3,5,7 and 10;at%)high-entropy alloys have been designed by the consideration of the thermophysical relationship between Ti and other principal elements to investigate the influence of Ti...Cr Fe Ni Cu)_(100-x)Ti_(x)(x=0,3,5,7 and 10;at%)high-entropy alloys have been designed by the consideration of the thermophysical relationship between Ti and other principal elements to investigate the influence of Ti on the microstructural evolution and mechanical properties of(CrFeNiCu)_(100-x)Ti_(x)high-entropy alloys.The addition of Ti content in HEAs leads to a change in phase formation from dual-phase(FCC1 and FCC2,FCC:face-centered cubic)to the mixture of FCC1,FCC2 phases,and an additional body-centered cubic(BCC)phase.The yield strength and Vickers hardness of the alloys are enhanced from 291 to 1511 MPa and HV 134 to HV 531,respectively,which depends strongly on the volume fraction of BCC phase.On the one hand,the plasticity of the alloys reduces from 45.00%to 24.09%,but it could be considered reasonable plasticity.These results revealed that the addition of a minor alloying element in high-entropy alloys with consideration of thermophysical parameters led to the formation of a multiple solid solution structure with excellent mechanical properties.展开更多
Two-dimensional asymmetric chalcogen atoms attached to Janus nanoparticles have fascinated research attention owing to their distinctive properties and characteristics for various applications.This paper proposed a fa...Two-dimensional asymmetric chalcogen atoms attached to Janus nanoparticles have fascinated research attention owing to their distinctive properties and characteristics for various applications.This paper proposed a facile synthesis to produce efficient molybdenum-based symmetric and asymmetric chalcogens bounded by X Mo X and TeMo X nanostructures.Subsequently,the fabricated X Mo X and TeMo X nanostruc-tures were employed as anodes for lithiumion batteries(LIBs).Assembled LIBs using TeMoS and TeMoSe Janus anodes achieved 2610 and 2073 mAh g^(-1)reversible capacity at 0.1 A g^(-1),respectively for the halfcell configuration,which is outstanding performance compared with previous reports.Superior rate capability performances at 0.1-20 A g^(-1)and exceptional cycling solidity confirmed high charge and discharge capacities for TeMo X Janus lithium-ion battery anodes.In addition,the full cell device with TeMoS//LiCoO_(2)configuration explored the discharge capacity of 1605 mAh g^(-1)at 0.1 A g^(-1)which suggests their excellent electrochemical characteristics.The density functional theory approximations established the significance of assembled symmetric and asymmetric chalcogen atoms interacted with X Mo X and TeMo X anode materials for LIBs.Thus,the present investigation supports a new approach to creating two-dimensional materials based on asymmetric chalcogen atoms with core metal to effectively increase desirable energy storage characteristics.展开更多
基金the National Research Foundation of Korea(NRF)funded by the Korean Government(MSIT)(No.2022R1A2C1006743)。
文摘This study presents a facile and rapid method for synthesizing novel Layered Double Hydroxide(LDH)nanoflakes,exploring their application as a photocatalyst,and investigating the influence of condensed phosphates'geometric linearity on their photocatalytic properties.Herein,the Mg O film,obtained by plasma electrolysis of AZ31 Mg alloys,was modified by growing an LDH film,which was further functionalized using cyclic sodium hexametaphosphate(CP)and linear sodium tripolyphosphate(LP).CP acted as an enhancer for flake spacing within the LDH structure,while LP changed flake dispersion and orientation.Consequently,CP@LDH demonstrated exceptional efficiency in heterogeneous photocatalysis,effectively degrading organic dyes like Methylene blue(MB),Congo red(CR),and Methyl orange(MO).The unique cyclic structure of CP likely enhances surface reactions and improves the catalyst's interaction with dye molecules.Furthermore,the condensed phosphate structure contributes to a higher surface area and reactivity in CP@LDH,leading to its superior photocatalytic performance compared to LP@LDH.Specifically,LP@LDH demonstrated notable degradation efficiencies of 93.02%,92.89%,and 88.81%for MB,MO,and CR respectively,over a 40 min duration.The highest degradation efficiencies were observed in the case of the CP@LDH sample,reporting 99.99%for MB,98.88%for CR,and 99.70%for MO.This underscores the potential of CP@LDH as a highly effective photocatalyst for organic dye degradation,offering promising prospects for environmental remediation and water detoxification applications.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(NRF-2020R1A6A1A03043435 and 2020R1A2C1099862)supported by the Korea Institute for Advancement of Technology(KIAT)grant funded by the Korean Government(MOTIE)(P0012451,The Competency Development Program for Industry Specialist)。
文摘MXenes,the most recent addition to the 2D material family,have attracted significant attention owing to their distinctive characteristics,including high surface area,conductivity,surface characteristics,mechanical strength,etc.This review begins by presenting MXenes,providing insights into their structural characteristics,synthesis methods,and surface functional groups.The review covers a thorough analysis of MXene surface properties,including surface chemistry and termination group impacts.The properties of MXenes are influenced by their synthesis,which can be fluorine-based or fluorinedependent.Fluorine-based synthesis techniques involve etching with fluorine-based reagents,mainly including HF or LiF/HCl,while fluorine-free methods include electrochemical etching,chemical vapor deposition(CVD),alkaline etching,Lewis acid-based etching,etc.These techniques result in the emergence of functional groups such as-F,-O,-OH,-Cl,etc.on the MXenes surface,depending on the synthesis method used.Properties of MXenes,such as electrical conductivity,electronic properties,catalytic activity,magnetic properties,mechanical strength,and chemical and thermal stability,are examined,and the role of functional groups in determining these properties is explored.The review delves into the diverse applications of MXenes,encompassing supercapacitors,battery materials,hydrogen storage,fuel cells,electromagnetic interference(EMI) shielding,pollutant removal,water purification,flexible electronics,sensors,additive manufacturing,catalysis,biomedical and healthcare fields,etc.Finally,this article outlines the challenges and opportunities in the current and future development of MXenes research,addressing various aspects such as synthesis scalability,etching challenges,and multifunctionality,and exploring novel applications.The review concludes with future prospects and conclusions envisioning the impact of MXenes on future technologies and innovation.
基金S.J.Park acknowledges the support from the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2022M3J7A1062940 and 2023R1A2C1004109)K.H.acknowledges the support from the Ministry of Education of the Republic of Korea and the National Research Foundation of Korea.(NRF-2023R1A2C2008017)+1 种基金Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(NRF-2020R1A6A1A03043435)The authors extend their appreciation to the Researchers Supporting Project(RSP2024R381),King Saud University,Riyadh,Saudi Arabia.
文摘Zinc-air batteries(ZABs)are gaining attention as an ideal option for various applications requiring high-capacity batteries,such as portable electronics,electric vehicles,and renewable energy storage.ZABs offer advantages such as low environmental impact,enhanced safety compared to Li-ion batteries,and cost-effectiveness due to the abundance of zinc.However,early research faced challenges due to parasitic reactions at the zinc anode and slow oxygen redox kinetics.Recent advancements in restructuring the anode,utilizing alternative electrolytes,and developing bifunctional oxygen catalysts have significantly improved ZABs.Scientists have achieved battery reversibility over thousands of cycles,introduced new electrolytes,and achieved energy efficiency records surpassing 70%.Despite these achievements,there are challenges related to lower power density,shorter lifespan,and air electrode corrosion leading to performance degradation.This review paper discusses different battery configurations,and reaction mechanisms for electrically and mechanically rechargeable ZABs,and proposes remedies to enhance overall battery performance.The paper also explores recent advancements,applications,and the future prospects of electrically/mechanically rechargeable ZABs.
基金supported by the National Research Foundation of Korea(NRF)funded by the Korean Government(MSIT)(No.2022R1A2C1006743).
文摘The formation of inorganic-organic hybrids(IOH)on the metallic substrates would play a decisive role in improving their structural and functional features.In this work,the growth of organic coating(OC)consisting of coumarin-3-carboxylic acid(3-CCA)and albumin(ALB)on the inorganic layer(IC),produced by plasma electrolysis of AZ31 Mg alloy,led to enabling organically synergistic reactions on the porous inorganic surface,forming a flake-like structure sealing the structural defects of IC.Synergistic actions between OC and IC endow the flake-like structures with chemical protection and photocatalytic performance.Upon contact with a corrosive solution,the IOH layer possesses stable morphologies that delay the corrosive degradation of the whole structure.The electrochemical stability of the sample produced by immersion IC in the organic solution for 10 h(IOH2 sample)was superior to the other samples as it had the lowest corrosion current density(1.69×10^(−10)A·cm^(−2))and the highest top layer resistance(1.2×10^(7)Ω·cm^(2)).Moreover,the IOH layer can photodegrade the organic pollutants in model wastewater,where the highest photocatalytic efficiency of 99.47%was found in the IOH2 sample.Furthermore,computational calculations were performed to assess the relative activity of different parts of the ALB and 3-CCA structures,which provide helpful information into the formation mechanism of the IOH materials.
基金supported by the National Research Foundation of Korea(NRF)funded by the Korean government(MSIT)(No.2022R1A2C1006743)
文摘This work looked into the influence of the sealing treatment on the structural feature and electrochemical response of AZ31 Mg alloy coated via plasma electrolytic oxidation(PEO).Here,the inorganic layers produced by PEO in an alkaline-phosphate electrolyte were subsequently immersed for different periods in cold(60°C)and hot(100°C)aqueous solutions containing either 1 or 3 gr of cobalt nitrate hexahydrate in the presence of hydrogen peroxide as an initiator.The results showed that the sealing treatments in the hot solutions could trigger the hydration reactions of PEO coating which would largely assist the surface incorporation of Co_(3)O_(4)into the coating.In contrast,the sealing in cold solutions led to less compact coatings,which was attributed to the fact the hydration reactions would be restricted at 60°C.A nearly fully sealed coating with a porosity of~0.5%was successfully formed on the sample immersed in the hot solution containing 1 gr of cobalt nitrate hexahydrate.Thus,the electrochemical stability of this fully sealed coating was superior to the other samples as it had the lowest corrosion current density(4.71×10^(-10)A·cm^(-2))and the highest outer layer resistance(3.81×10^(7)Ω·cm^(2)).The composite coatings developed in this study are ideal for applications requiring high electrochemical stability.
基金supported by the National Natural Science Foundations of China(22150410340)the Chongqing Science&Technology Commission(catc2018jcyjax0582)。
文摘Methanol cross-over effects from the anode to the cathode are important parameters for reducing catalytic performance in direct methanol fuel cells.A promising candidate catalyst for the cathode in direct methanol fuel cells must have excellent activity toward oxygen reduction reaction and resistance to methanol oxidation reaction.This review focuses on the methanol tolerant noble metal-based electrocatalysts,including platinum and palladium-based alloys,noble metal–carbon based composites,transition metal-based catalysts,carbon-based metal catalysts,and metal-free catalysts.The understanding of the correlation between the activity and the synthesis method,electrolyte environment and stability issues are highlighted.For the transition metal-based catalyst,their activity,stability and methanol tolerance in direct methanol fuel cells and comparisons with those of platinum are particularly discussed.Finally,strategies to enhance the methanol tolerance and hinder the generation of mixed potential in direct methanol fuel cells are also presented.This review provides a perspective for future developments for the scientist in selecting suitable methanol tolerate catalyst for oxygen reduction reaction and designing high-performance practical direct methanol fuel cells.
基金supported by the National Research Foundation of Korea(NRF)funded by the Korean government(MSIT)(no.2022R1A2C1006743)。
文摘Meeting the demands of complex and advanced applications requires the development of high-performance hybrid materials with unique properties.However,the integration of polymeric frameworks with MgO/WO_(3) composite layers faces challenges due to the lack of understanding of the formation mechanism and the challenge of determining the impact of self-assembled architecture on anticorrosive properties.In this study,we aimed to enhance the corrosion resistance of the MgO layer produced by plasma electrolysis(PE)of AZ31 Mg alloy by incorporating WO_(3) with partially phosphorated poly(vinyl alcohol)(PPVA).Two types of porous MgO layers were produced using the PE process with an alkaline-phosphate electrolyte,one with and one without WO_(3) nanoparticles,which were subsequently immersed in an aqueous solution of PPVA.Incorporating PPVA into the WO_(3)-MgO layer resulted in hybrids being deposited in a fragmented manner,creating a“laminar reef-like structure”that sealed most of the structural defects in the layer.The PPVA-sealed WO_(3)-based coating exhibited superior corrosion resistance compared to the other samples.Computational analyses were employed to explore the mechanism underlying the formation of PPVA/WO_(3) hybrids on the MgO layer.These findings suggest that PPVA-WO_(3)-MgO hybrid coatings can potentially improve corrosion resistance in various fields.
基金supported by the National Research Foundation of Korea(NRF)funded by the Korean government(MSIT)(no.2022R1A2C1006743)。
文摘The self-assembly of hybrid inorganic-organic materials on stationary platforms plays a critical role in improving their structural stability and wide usability.In this work,a novel two-step hydrothermal approach is proposed for synthesizing stable and advanced hybrid coatings on metal-oxide platforms through the surface modification of layered double hydroxide(LDH)films using novel metal-organic frameworks(MOFs).Initially,Mg-Al LDH nanocontainers,grown on a magnesium oxide layer produced through plasma electrolytic oxidation(PEO)of AZ31 Mg alloy substrate,were intercalated with cobalt via an oxidation route,providing the metallic coordination center for the MOF formation.In the subsequent step,a pioneering technique is introduced,utilizing tryptophan as the organic linker for the first time at a pH of 10.The self-assembly of cobalt-tryptophan complex,driven by the strong bonding between electrophilic sites of monomers and nucleophilic sites,facilitated the formation of a MOF network having a cloud-like structure on the surface of MgAl LDH's film.The resulting MOF-LDH encapsulation containers demonstrate exceptional electrochemical stability when exposed to a 3.5 wt.%NaCl solution,surpassing the performance of PEO and pure LDH coatings.This enhanced stability is attributed to the development of a dense top layer and a stable composition within the self-assembled MOF,effectively sealing flaws and preventing the infiltration of corrosive ions into the underlying metallic substrate.The formation mechanism of MOFs on LDH galleries is investigated using density functional theory calculations.
文摘Magnesium(Mg)alloys are lightweight materials with excellent mechanical properties,making them attractive for various applications,including aerospace,automotive,and biomedical industries.However,the practical application of Mg alloys is limited due to their high susceptibility to corrosion.Plasma electrolytic oxidation(PEO),or micro-arc oxidation(MAO),is a coating method that boosts Mg alloys'corrosion resistance.However,despite the benefits of PEO coatings,they can still exhibit certain limitations,such as failing to maintain long-term protection as a result of their inherent porosity.To address these challenges,researchers have suggested the use of inhibitors in combination with PEO coatings on Mg alloys.Inhibitors are chemical compounds that can be incorporated into the coating or applied as a post-treatment to further boost the corrosion resistance of the PEO-coated Mg alloys.Corrosion inhibitors,whether organic or inorganic,can act by forming a protective barrier,hindering the corrosion process,or modifying the surface properties to reduce susceptibility to corrosion.Containers can be made of various materials,including polyelectrolyte shells,layered double hydroxides,polymer shells,and mesoporous inorganic materials.Encapsulating corrosion inhibitors in containers fully compatible with the coating matrix and substrate is a promising approach for their incorporation.Laboratory studies of the combination of inhibitors with PEO coatings on Mg alloys have shown promising results,demonstrating significant corrosion mitigation,extending the service life of Mg alloy components in aggressive environments,and providing self-healing properties.In general,this review presents available information on the incorporation of inhibitors with PEO coatings,which can lead to improved performance of Mg alloy components in demanding environments.
基金supported by the National Research Foundation of Korea (NRF)the Ministry of Science,ICT (2022M3J1A1085285,2019R1A2C1084010,and 2022R1A2C2006532)the Korea Electric Power Corporation (R20XO02-1)。
文摘Carbazole moiety-based 2PACz([2-(9H-carbazol-9-yl)ethyl]phosphonic acid)self-assembled monolayers(SAMs)are excellent hole-selective contact(HSC)materials with abilities to excel the charge-transferdynamics of perovskite solar cells(PSCs).Herein,we report a facile but powerful method to functionalize the surface of 2PACz-SAM,by which reproducible,highly stable,high-efficiency wide-bandgap PSCs can be obtained.The 2PACz surface treatment with various donor number solvents improves assembly of 2PACz-SAM and leave residual surface-bound solvent molecules on 2PACz-SAM,which increases perovskite grain size,retards halide segregation,and accelerates hole extraction.The surface functionalization achieves a high power conversion efficiency(PCE)of 17.62%for a single-junction wide-bandgap(~1.77 e V)PSC.We also demonstrate a monolithic all-perovskite tandem solar cell using surfaceengineered HSC,showing high PCE of 24.66%with large open-circuit voltage of 2.008 V and high fillfactor of 81.45%.Our results suggest this simple approach can further improve the tandem device,when coupled with a high-performance narrow-bandgap sub-cell.
文摘This study presents morphological and structural variations of K-Feldspar mineral after acid treatment. Both organic and inorganic acids such as C2H2O4, HCl, HNO3 and H2SO4 were employed for this purpose. Another aim of this study was to find an optimum experimental condition for iron(Fe) removal with a minimum damage on the structure of K-Feldspar in which high whiteness index is obtained. The effect of different parameters such as concentration, pH and temperature on the final structure of this mineral was investigated. To find out the chemical composition of powder, XRF was utilized. FTIR, XRD and SEM were employed to study the structure of mineral. Spectrophotometry was chosen to analyze whiteness index of powder after acid treatment. It was found that O—Al—O bond at 647 cm^-1 for H2SO4 and HNO3 treated sample disappeared. However, HCl and C2H2O4 were ineffective at this band. In addition, the results revealed an increase in K-Feldspar content, a decrease in Fe content, an increase in whiteness index and no significant structural change for C2H2O4 leached sample. Whiteness index of 91% was obtained for C2H2O4 leached sample with the pH of 2.5 to 3 at temperature of 50 ℃ and during 1 h.
基金supported by the Research Program of Dongguk University in 2022(No.S-2022-G0001-00016)。
文摘Exploring novel versatile electrode materials with outstanding electrochemical performance is the key to the development of advanced energy conversion and storage devices.In this work,we aim to construct new-fangled one-dimensional(1D)quasi-layered patronite vanadium tetrasulfide(VS_(4))nanostructures by using different sulfur sources,namely thiourea,thioacetamide,and L-cysteine through an ethyleneaminetetraacetic-acid(EDTA)-mediated solvothermal process.The as-prepared VS4exhibits several unique morphologies such as urchin,fluffy nanoflower,and polyhedron with appropriate surface areas.Among the prepared nanostructures,the VS_(4)-1@NF nanostructure exhibited excellent electrochemical properties in 6 M KOH solution,and we explored its redox electrochemistry in detail.The asprepared VS_(4)-1@NF electrode exhibited battery-type redox characteristics with the highest capacity of280 C g^(-1)in a three-electrode assembly.Moreover,it offered a capacity of 123 F g^(-1)in a hybrid twoelectrode set-up at 1 A g^(-1)with the highest specific energy and specific power of 38.5 W h kg^(-1)and750 W kg^(-1),respectively.Furthermore,to ensure the practical applicability and real-world performance of the prepared hybrid AC@NF//VS_(4)-1@NF cell,we performed a cycling stability test with more than 5,000galvanostatic charge–discharge cycles at 2 A g^(-1),and the cell retained around 84.7%of its capacitance even after 5,000 cycles with a CE of 96.1%.
文摘Mg and its alloys have been introduced as promising biodegradable materials for biomedical implant applications due to their excellent biocompatibility, mechanical behavior, and biodegradability. However, their susceptibility to rapid corrosion within the body poses a significant challenge and restricts their applications. To overcome this issue, various surface modification techniques have been developed to enhance the corrosion resistance and bioactivity of Mg-based implants. PEO is a potent technique for producing an oxide film on a surface that significantly minimizes the tendency to corrode. However, the inevitable defects due to discharges and poor biological activity during the coating process remain a concern. Therefore, adding suitable particles during the coating process is a suitable solution. Hydroxyapatite(HAp)has attracted much attention in the development of biomedical applications in the scientific community. HAp shows excellent biocompatibility due to its similarity in chemical composition to the mineral portion of bone. Therefore, its combination with Mg-based implants through PEO has shown significant improvements in their corrosion resistance and bioactivity. This review paper provides a comprehensive overview of the recent advances in the preparation, characterization, corrosion behavior and bioactivity applications of HAp particles on Mg-based implants by PEO.
基金This work was supported by the National Research Foundation of Korea(NRF)funded by the Korean government(MSIT)(No.2022R1A2C1006743).
文摘A novel inorganic-organic layer with outstanding corrosion resistance in a 3.5wt.% NaCl solution was fabricated by taking advantage of the unique interactions between coumarin (COM) molecules and the porous layer formed on Mg alloy. To achieve this aim, the AZ31 Mg alloy coated via microarc oxidation (MAO) coating was placed in an ethanolic solution of COM for 6 and 12 h at 25 ℃. By reducing the surface area exposed to the corrosive species, the donor-acceptor complexes produced by the particular interactions between the COM and MAO surface would successfully prevent the corrosion of Mg alloy substrate. The MAO layer would provide the ideal sites for the charge-transfer-induced physical and chemical locking, leading to uneven organic layer nucleation and crystal growth with a thatch-like structure. To evaluate the formation mechanism of such hybrid composites and highlight the key bonding modes between the COM and MAO, theoretical simulations were conducted.
基金supported by the Basic Science Research Program through the National Research Foundation of Korea,funded by the Ministry of Science,ICT,and Future Planning(NRF Award No.NRF-2019R1A2C2002024 and 2021R1A4A1031357)supported by the Basic Science Research Program through NRF funded by the Ministry of Education(NRF Award No.NRF2020R1A6A1A03043435)。
文摘Engineering point defects such as metal and oxygen vacancies play a crucial role in manipulating the electrical,optical,and catalytic properties of oxide semiconductors for solar water splitting.Herein,we synthesized nanoporous CuBi_(2)O_(4)(np-CBO)photocathodes and engineered their surface point defects via rapid thermal processing(RTP)in controlled atmospheres(O_(2),N_(2),and vacuum).We found that the O_(2)-RTP treatment of np-CBO increased the charge carrier density effectively without hampering the nanoporous morphology,which was attributed to the formation of copper vacancies(VCu).Further analyses revealed that the amounts of oxygen vacancies(Vo)and Cu^(1+)were reduced simultaneously,and the relative electrochemical active surface area increased after the O_(2)-RTP treatment.Notably,the point defects(VC_(u),Cu^(1+),and Vo)regulated np-CBO achieved a superb water-splitting photocurrent density of-1.81 m A cm^(-2) under simulated sunlight illumination,which is attributed to the enhanced charge transport and transfer properties resulting from the regulated surface point defects.Finally,the reversibility of the formation of the point defects was checked by sequential RTP treatments(O_(2)-N_(2)-O_(2)-N_(2)),demonstrating the strong dependence of photocurrent response on the RTP cycles.Conclusively,the surface point defect engineering via RTP treatment in a controlled atmosphere is a rapid and facile strategy to promote charge transport and transfer properties of photoelectrodes for efficient solar water-splitting.
文摘Recently,developing bioactive and biocompatible materials based on Mg and Mg-alloys for implant applications has drawn attention among researchers owing to their suitable body degradability.Implementing Mg and its alloys reduces the risk of long-term incompatibility with tissues because of their close mechanical properties and no need for re-operation to remove the implant.Nevertheless,the degradation rate of the implant needs to be controlled because production of hydrogen gas and accumulation of its bubbles increases local pH around the implants.To confine the integrity of implants and the body,the corrosion concern in the body fluid requires to be addressed.Surface modification as one of the effective strategies can improve corrosion resistance.Besides,it creates a suitable surface for bone grafting and cell growth.The development of proper surface-coated implants needs appropriate techniques and approaches.Plasma electrolytic oxidation(PEO)coating can provide long-term protection by providing a ceramic layer and improving the implant’s biocompatibility.Herein,a general review of in-vivo and in-vitro evaluation of PEO coatings on Mg and Mg-alloys has been carried out.Recent advances in surface modification on Mg and Mg-alloys have been discussed,however,the need for reliable laboratory models to predict in-vivo degradation is still valid.
基金the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.NRF-2019R1G1A1099335)supported also by the Mid-Level Researcher National Project of the National Research Foundation(NRF)funded by the Ministry of Science and ICT,Republic of Korea(NRF-2020R1A2C2004192)supported partly by Basic Research Program through the National Research Foundation,Republic of Korea(NRF-2019R1FA1062702)。
文摘The unique interactions between hexadecanoic acid(HA)and albumin(ALB)molecules on the surface of the porous layer of AZ31 Mg alloy were exploited to fabricate a novel hybrid composite film with excellent electrochemical stability in a 3.5 wt.%Na Cl solution.Herein,the inorganic layer(IL)obtained by plasma electrolytic oxidation of AZ31 Mg alloy in an alkaline-phosphate-WO_(3)electrolyte was soaked in an organic solution composed of ALB and HA for 10 and 24 h at 60℃.Although albumin and HA may coexist on the same surface of IL,the higher reactivity of ALB molecules would prevent the formation of a thick layer of HA.The donor-acceptor complexes formed due to the unique interactions between ALB and/or HA and IL surface would reduce the area exposed to the corrosive species which in turn would efficiently protect the substrate from corrosion.The porous structure of the IL would provide preferable sites for the physical and chemical locking triggered by charge-transfer phenomena,leading to the inhomogeneous nucleation and crystal growth of a flowery flakes-like organic layer.DFT calculations were performed to reveal the primary bonding modes between the ALB,HA,and IL and to assess the mechanistic insights into the formation of such novel hybrid composites.
基金financially supported by the National Research Foundation of Korea(NRF)grant funded by the Korean Government(Ministry of Science and ICT)(Nos.2018R1A2B3007167 and 2021R1C1C1006279)the Agency for Presidential Educational Institutions of the Republic of Uzbekistan(No.3/2022)。
文摘Cr Fe Ni Cu)_(100-x)Ti_(x)(x=0,3,5,7 and 10;at%)high-entropy alloys have been designed by the consideration of the thermophysical relationship between Ti and other principal elements to investigate the influence of Ti on the microstructural evolution and mechanical properties of(CrFeNiCu)_(100-x)Ti_(x)high-entropy alloys.The addition of Ti content in HEAs leads to a change in phase formation from dual-phase(FCC1 and FCC2,FCC:face-centered cubic)to the mixture of FCC1,FCC2 phases,and an additional body-centered cubic(BCC)phase.The yield strength and Vickers hardness of the alloys are enhanced from 291 to 1511 MPa and HV 134 to HV 531,respectively,which depends strongly on the volume fraction of BCC phase.On the one hand,the plasticity of the alloys reduces from 45.00%to 24.09%,but it could be considered reasonable plasticity.These results revealed that the addition of a minor alloying element in high-entropy alloys with consideration of thermophysical parameters led to the formation of a multiple solid solution structure with excellent mechanical properties.
基金supported by the Mid-career Researcher Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(No.2019R1A2C2086747)and the research program of Dongguk University in 2022(No.S-2022-G0001-00016).
文摘Two-dimensional asymmetric chalcogen atoms attached to Janus nanoparticles have fascinated research attention owing to their distinctive properties and characteristics for various applications.This paper proposed a facile synthesis to produce efficient molybdenum-based symmetric and asymmetric chalcogens bounded by X Mo X and TeMo X nanostructures.Subsequently,the fabricated X Mo X and TeMo X nanostruc-tures were employed as anodes for lithiumion batteries(LIBs).Assembled LIBs using TeMoS and TeMoSe Janus anodes achieved 2610 and 2073 mAh g^(-1)reversible capacity at 0.1 A g^(-1),respectively for the halfcell configuration,which is outstanding performance compared with previous reports.Superior rate capability performances at 0.1-20 A g^(-1)and exceptional cycling solidity confirmed high charge and discharge capacities for TeMo X Janus lithium-ion battery anodes.In addition,the full cell device with TeMoS//LiCoO_(2)configuration explored the discharge capacity of 1605 mAh g^(-1)at 0.1 A g^(-1)which suggests their excellent electrochemical characteristics.The density functional theory approximations established the significance of assembled symmetric and asymmetric chalcogen atoms interacted with X Mo X and TeMo X anode materials for LIBs.Thus,the present investigation supports a new approach to creating two-dimensional materials based on asymmetric chalcogen atoms with core metal to effectively increase desirable energy storage characteristics.