CMOS Design of Ternary Arithmetic Devices Wu Xunwei Dept.of Electronic Engineering,Hangzhou University,Hangzhou 310028F.P rosser Dept.of Computer Science,Indiana University,U.S.A.

This paper presents CMOS circuit designs of a ternary adder and a ternary multiplier,formulated using transmission function theory.Binary carry signals appearing in these designs allow conventional look-ahead carry techniques to be used.Compared with previous similar designs,the circuits proposed in this paper have advantages such as low dissipation,low output impedance,and simplicity of construction.

Effect of different drying methods on the amino acids,α-dicarbonyls and volatile compounds of rape bee pollen

The significant demand for high quality food has motivated us to adopt appropriate processing methods to improve the food nutritional quality and flavors.In this study,the effects of five drying methods,namely,pulsed vacuum drying(PVD),freeze drying(FD),infrared drying(IRD),hot-air drying(HAD)and sun drying(SD)on free amino acids(FAAs),α-dicarbonyl compounds(α-DCs)and volatile compounds(VOCs)in rape bee pollen(RBP)were determined.The results showed that FD significantly released the essential amino acids(EAAs)compared with fresh samples while SD caused the highest loss.Glucosone was the dominantα-DCs in RBP and the highest loss was observed after PVD.Aldehydes were the dominant volatiles of RBP and SD samples contained more new volatile substances(especially aldehydes)than the other four drying methods.Comprehensively,FD and PVD would be potential methods to effectively reduce the quality deterioration of RBP in the drying process.

An integrated spatial planning of the mountainous landscapes for ski sports in a case area at the eastern Türkiye

Mountainous regions have disadvantages in economic development because of harsh physical and climatic conditions.However,winter tourism activities are one of the key components for supporting economic development in the highlands.Establishing a ski resort area supports direct and indirect employment in a region,and it stops immigration from mountainous regions to other places.This research aimed to assess the potential ski areas using a multi criteria evaluation technique in the Van region which is located in the eastern part of Türkiye.In this context,snow cover duration,sun effect,slope,slope length,elevation,population density,distance from main roads and lake visibility were used as input factors in the decision making process.Each factor was standardized using a fuzzy technique based on existing well-known ski centers in Türkiye.The weight of inputs was defined by applying a survey to the professional skiers.The most important factors were detected as transportation opportunities and snow covers whereas,the least important factors were elevation and population density.Additionally,lake visibility was very important to make a difference from other existing facilities in the region.Therefore,it was included as constraints and lake visible areas were extracted at the final stage of the research.Potential ski areas were mapped in three levels as professional,intermediate and beginner skiers.One of the suitable areas was selected as a sample projection and for the 3D simulation of the ski investment area.Potential costs and benefits were discussed.It was found that a ski tourism area investment can be amortized in 3 years in the region.

Alignment of Track Oscillations during Tropical Cyclone Rapid Intensification

Recent studies on tropical cyclone(TC)intensity change indicate that the development of a vertically aligned TC circulation is a key feature of its rapid intensification(RI),however,understanding how vortex alignment occurs remains a challenging topic in TC intensity change research.Based on the simulation outputs of North Atlantic Hurricane Wilma(2005)and western North Pacific Typhoon Rammasun(2014),vortex track oscillations at different vertical levels and their associated role in vortex alignment are examined to improve our understanding of the vortex alignment during RI of TCs with initial hurricane intensity.It is found that vortex tracks at different vertical levels oscillate consistently in speed and direction during the RI of the two simulated TCs.While the consistent track oscillation reduces the oscillation tilt during RI,the reduction of vortex tilt results mainly from the mean track before RI.It is also found that the vortex tilt is primarily due to the mean vortex track before and after RI.The track oscillations are closely associated with wavenumber-1 vortex Rossby waves that are dominant wavenumber-1 circulations in the TC inner-core region.This study suggests that the dynamics of the wavenumber-1 vortex Rossby waves play an important role in the regulation of the physical processes associated with the track oscillation and vertical alignment of TCs.

赛德西港用于船舶减排的陆上可再生能源供电评估

Air pollution from shipping is becoming a critical issue,particularly in dense hub port cities.One proposed solution to minimize ship-based emissions at ports is the implementation of an Onshore Power Supply(OPS)system.OPS allows ships to shut off their auxiliary engines and instead connect to the port grid.While there have been numerous studies conducted on ports in Europe and the United States,little research has been done on Egyptian ports.Therefore,this paper aims to investigate the feasibility of implementing OPS at Port Said West Port in Egypt,aligning with Egypt Vision 2030’s goals for addressing climate change.The research primarily focuses on analyzing data collected from calling ships to generate socio-economic and cost-effectiveness analyses of OPS.To further enhance the environmental benefits of OPS,the paper proposes the use of solar energy as the OPS electricity source.The findings of the study revealed that by relying on the national grid,emissions can be reduced by 28%.Moreover,it is predicted that this reduction could reach 100%if electricity generation is solely based on solar energy.Additionally,the economic analysis demonstrates promising profitability,with a payback period of approximately two years.

A case report on a rare case of primary tuberculous otitis media

Although tuberculosis has become more common in recent years, it still accounts for just a small percentage of cases of chronic otitis media. Common symptoms of tuberculous otitis media(TOM) include otorrhoea, hearing loss, and multiple tympanic membrane perforations. Due to its rarity, the illness is frequently misdiagnosed. When a patient does not improve with standard antibacterial and antifungal treatment, this may be a possible diagnosis to explore. Complete healing is possible if the illness is diagnosed and treated timely to prevent consequences.

A Blind Batch Encryption and Public Ledger-Based Protocol for Sharing Sensitive Data

For the goals of security and privacy preservation,we propose a blind batch encryption-and public ledger-based data sharing protocol that allows the integrity of sensitive data to be audited by a public ledger and allows privacy information to be preserved.Data owners can tightly manage their data with efficient revocation and only grant one-time adaptive access for the fulfillment of the requester.We prove that our protocol is semanticallly secure,blind,and secure against oblivious requesters and malicious file keepers.We also provide security analysis in the context of four typical attacks.

Microbial Growth and Decay: A Commented Review of the Model

The paper reviews previous publications and reports some comments about a semi empirical model of the growth and decay process of a planktonic microbial culture. After summarizing and reshaping some fundamental mathematical expressions, the paper highlights the reasons for the choice of a suitable time origin that makes the parameters of the model self-consistent. Besides the potential applications to predictive microbiology studies and to effects of bactericidal drugs, the model allows a suitable proxy of the fitness of the microbial culture, which can be of interest for the studies on the evolution across some thousand generations of a Long Term Evolution Experiment.

Use of Unconventional Aggregates in Hot Mix Asphalt Concrete

The study investigates use of dolomite sand waste as filler or/and sand material plus BOF steel slag as fine and coarse aggregate for design of high performance asphalt concrete.Both environmental and economic factors contribute to the growing need for the use of these materials in asphalt concrete pavements.This is particularly important for Latvia,where local crushed dolomite and sandstone does not fulfill the requirements for mineral aggregate in high and medium intensity asphalt pavements roads.Annually 100 to 200 thousand tons of steel slag aggregates are produced in Latvia.However,it has not been used extensively in asphalt pavement despite its high performance characteristics.Dolomite sand waste,which is byproduct of crushed dolomite production,is another widely available polydisperse by-product in Latvia.Its quantity has reached a million of tons and is rapidly increasing.This huge quantity of technological waste needs to be recycled with maximum efficiency.Various combinations of steel slag,dolomite sand waste and conventional aggregates were used to develop AC 11 asphalt concrete mixtures.The mix properties tests include resistance to permanent deformations(wheel tracking test,dynamic creep test)and fatigue resistance.Laboratory test results showed that asphalt concrete mixtures containing steel slag and local limestone in coarse portion and dolomite sand waste in sand and filler portions had high resistance to plastic deformations and good resistance to fatigue failure.

Pressure Measurements from Five Different Nosebands at Rest, and During Riding at Walk, a Collected Gait, Backing up and a Full Stop

Background: Scientific procedures for addressing noseband fit and tightness, eliminating the risk of excessive and painful tightening, as well as quantitative measurements of pressures under the noseband while riding are either scarce or lacking. Purpose/Aim: To assess simple means of measuring pressure under different nosebands with a view to their adoption as scientific methodology. Method: Horses (n = 7) were fitted with five different bridles (A-E). Pressure distribution and intensity were measured using colour sensitive film (Fujifilm LLLW), assessing the level of pressure and distribution across the surface of the nosebands, as assessed and ranked by independent assessors. A CURO system was also used to measure pressure in real-time under nosebands whilst riding. Results: The colour-sensitive film for D & B were ranked 1st and 2nd, respectively. Regularity of pressure overall showed a statistical difference between nosebands (A & B significantly more unregular than the others). Pressure measurements revealed significantly different means (all P Conclusions: Pressures under nosebands can reach levels that appear capable of inflicting tissue damage, hence bridles and nosebands should be assessed using scientific methodology and not based on arbitrary and subjective criteria, as is currently the case.

A Warm Reception for the Year of the Dragon

A dragon year,so I read somewhere,is one in which,individually and collectively,we are filled with energy and confidence.It’s supposed to be a year of transformation,good fortune and prosperity;all of which,it seems to me,is just what the world needs as it continues to shake off the effects of the COVID-19 pandemic.

Confirmation of a Sub-Saturn-size Transiting Exoplanet Orbiting a G Dwarf:TOI-1194 b and a Very Low Mass Companion Star: TOI-1251 B from TESS

We report the confirmation of a sub-Saturn-size exoplanet,TOI-1194 b,with a mass of about 0.456+0.055-0.051M_(J),and a very low mass companion star with a mass of about 96.5±1.5 MJ,TOI-1251 B.Exoplanet candidates provided by the Transiting Exoplanet Survey Satellite(TESS)are suitable for further follow-up observations by ground-based telescopes with small and medium apertures.The analysis is performed based on data from several telescopes worldwide,including telescopes in the Sino-German multiband photometric campaign,which aimed at confirming TESS Objects of Interest(TOIs)using ground-based small-aperture and medium-aperture telescopes,especially for long-period targets.TOI-1194 b is confirmed based on the consistent periodic transit depths from the multiband photometric data.We measure an orbital period of 2.310644±0.000001 days,the radius is 0.767+0.045-0.041RJ and the amplitude of the RV curve is 69.4_(-7.3)^(+7.9)m s^(-1).TOI-1251 B is confirmed based on the multiband photometric and high-resolution spectroscopic data,whose orbital period is 5.963054+0.000002-0.000001days,radius is 0.947+0.035-0.033 R_(J) and amplitude of the RV curve is 9849_(-40)^(+42)ms^(-1).

A study on the treatment of chloasma with moxibustion based on the theory of“Yang transforming Qi,and Yin shaping”

Background:“Yang Transforming Qi and Yin shaping”comes from“Plain Question Yin and Yang should be like the theory”.Chinese medicine believes that the imbalance of yin and yang is the cause of human diseases.One of the strengths of TCM in treating diseases is holistic regulation.The theory of“Yang transforming Qi,and Yin shaping”implies a strong holistic view.Chloasma,one of the common skin diseases,seriously affects the physical and mental health of patients due to its unclear etiology,difficult treatment and easy recurrence.The occurrence and development of chloasma are closely related to internal organs.This paper is based on the theory of internal meridian,“Yang transforming Qi,and Yin shaping”which attaches importance to the concept of“Yang Qi”,from a new understanding of the pathogenesis etiology of chloasma.Methods:The author believes that the incidence of the disease is the deficiency of Yang Qi,which can’t promote the movement of Qi and blood to nourish the face,resulting in tangible material condensation,so proposes that this disease needs to be promoted by Yang transforming Qi and warm to dissipate.Moxibustion belongs to the fire,and its warming effect can dissipate the tangible evil.Results:Combined with clinical practice and the theory of internal meridian,the author elaborated that moxibustion is one of the effective methods for treating chloasma,which provides a new way of thinking for the treatment of chloasma.Conclusion:“Yang Transforming Qi and Yin shaping”can be used to guide the treatment of chloasma.

Computer Aided Design of Heat Treatment for AISI P20+Ni Mold Steel with Good Machinability

Computer aided design of heat treatment for AISI P20 mold steel with good machinability is attempted to proceed by the commercial software package Thermo-Calc (TCP+DICTRA). Through experimental and theoretical analysis of phase transformation during heat treatment, further knowledge of designing proper heat treatment is obtained. Then the machinability of AISI P20+Ni steel under given heat treatment condition is studied and the influencing factors to their machinability are analyzed. It is shown that heat treatment designed by computer simulation of carbide transformation is applicable to AISI P20+Ni steel with good machinability; AISI P20+Ni steel with tempered sorbite treated by quenching & tempering has optimal machinability; normalizing at the temperature of 910°C & tempering can avoid cracking and result in acceptable machinability in small thickness module.

Smart Human Computer Interface with EMG and Vision Based on Multi-modal Information Fusion

A smart Human-Computer Interface(HCI)replacing conventional mouse interface is proposed.The interface is able to control cursor and command action with only hand.Four finger motions(left click,right click,hold,drag)are used to command the interface.Also the authors materialize cursor movement control using image processing.The measure what they use for inference is entropy of Electromyogram(EMG)signal,Gaussian modeling and maximum likelihood estimation.In image processing for cursor control,they use color recognition to get the center point of finger tip from marker,and map the point onto cursor.Accuracy of finger movement inference is over 95% and cursor control works naturally without delay.They materialize whole system to check its performance and utility.

Computer-aided designing and manufacturing of advanced steels

Suitable optimization and simulation were performed using a powerful software package with a mature database as well as modem measurement facilities, which led to the successful designing and manufacturing of advanced steels. In the course of designing, the composition of a large section of prehardened mold steel for plastics was estimated so as to lower the quantities of oxide inclusions to change the type of carbides and to raise the machinability. The composition and process were adjusted to obtain satisfactory surface quality for the prevailing galvanization in transformation-induced plasticity （TRIP） steel. The refuting process of low-carbon steel was simulated in the light of both Thermo-Calc and Factsage. Thermodynamic and kinetic analyses were always conducted during the test and the procedure.

DECISION OF SELECTION ABOUT COMPUTER SYSTEM AND ITS VENDOR

The purpose of this article is to help small business persons who are in the market formicro-computers to select and use the specific product or service that will most effectively satisfytheir needs.This study is the development of a structure of representing system attributes in a formsuitable for a manageable decision model.This study uses“Descriptor”software package as a tooland uses the decision model of selecting a computer system and its vendor for an organization(buyer)to exemplify the application of“Descriptor”in decision processing.