In this study, Inconel 738 alloy was diffusion bonded to a ferritic stainless steel. The effect of bonding temperature on the microstructural development across the joint region was investigated. Following the diffusi...In this study, Inconel 738 alloy was diffusion bonded to a ferritic stainless steel. The effect of bonding temperature on the microstructural development across the joint region was investigated. Following the diffusion bonding, conventional characterization techniques such as scanning electron microscopy （SEM）, energy dispersive X-ray （EDX） and microhardness were used to examine the interracial microstructure. It was seen that bonding temperature was effective on the diffusion of Ni from Inconel 738 to ferritic stainless steel that affected the microstructure of the interface. Austenite phase was formed at the interface as a result of Ni diffusion from the Inconel 738 to the interface.展开更多
This paper presents an elasto-viscoplastic consistent tangent operator (CTO) based boundary element formulation, and application for calculation of path-domain independentJ integrals (extension of the classicalJ integ...This paper presents an elasto-viscoplastic consistent tangent operator (CTO) based boundary element formulation, and application for calculation of path-domain independentJ integrals (extension of the classicalJ integrals) in nonlinear crack analysis. When viscoplastic deformation happens, the effective stresses around the crack tip in the nonlinear region is allowed to exceed the loading surface, and the pure plastic theory is not suitable for this situation. The concept of consistency employed in the solution of increment viscoplastic problem, plays a crucial role in preserving the quadratic rate asymptotic convergence of iteractive schemes based on Newton's method. Therefore, this paper investigates the viscoplastic crack problem, and presents an implicit viscoplastic algorithm using the CTO concept in a boundary element framework for path-domain independentJ integrals. Applications are presented with two numerical examples for viscoplastic crack problems andJ integrals.展开更多
To increase the competition of the solar energy collection system, the size of the solar panel module during the manufacturing process is being increased continuously. As the size of the solar panel increases, the siz...To increase the competition of the solar energy collection system, the size of the solar panel module during the manufacturing process is being increased continuously. As the size of the solar panel increases, the size of the robot to handle the panel increased also. The change in scale of the robot inevitably results ill the amplification of the adverse effect of tile flexure. The main source of the flexure in the large scale solar cell panel handling system is the long and thin fork fingers of the [land and the solar cell panel. In addition, tile belt-driven actuator system used by most of the large scale panel handling robot is another significant source of the vibration. In this paper, the flexible multi body dynamic model of a large scale solar cell panel handling robot, which is being designed and constructed with the help of Kyung Hee University, is developed. The belt-driven system in the robot is also modeled as flexible system and included ill the robot to represent the actual vibration characteristics of the actuator system. C 2013 The Chinese Society of Theoretical and Applied Mechanics. [doi： 10.1063/2.1301310]展开更多
文摘In this study, Inconel 738 alloy was diffusion bonded to a ferritic stainless steel. The effect of bonding temperature on the microstructural development across the joint region was investigated. Following the diffusion bonding, conventional characterization techniques such as scanning electron microscopy （SEM）, energy dispersive X-ray （EDX） and microhardness were used to examine the interracial microstructure. It was seen that bonding temperature was effective on the diffusion of Ni from Inconel 738 to ferritic stainless steel that affected the microstructure of the interface. Austenite phase was formed at the interface as a result of Ni diffusion from the Inconel 738 to the interface.
基金The project supported by National Natural Science Foundation of China(9713008)Zhejiang Natural Science Foundation Special Funds No. RC.9601
文摘This paper presents an elasto-viscoplastic consistent tangent operator (CTO) based boundary element formulation, and application for calculation of path-domain independentJ integrals (extension of the classicalJ integrals) in nonlinear crack analysis. When viscoplastic deformation happens, the effective stresses around the crack tip in the nonlinear region is allowed to exceed the loading surface, and the pure plastic theory is not suitable for this situation. The concept of consistency employed in the solution of increment viscoplastic problem, plays a crucial role in preserving the quadratic rate asymptotic convergence of iteractive schemes based on Newton's method. Therefore, this paper investigates the viscoplastic crack problem, and presents an implicit viscoplastic algorithm using the CTO concept in a boundary element framework for path-domain independentJ integrals. Applications are presented with two numerical examples for viscoplastic crack problems andJ integrals.
基金supported by the Korean Ministry of Knowledge and Economics(10035218)
文摘To increase the competition of the solar energy collection system, the size of the solar panel module during the manufacturing process is being increased continuously. As the size of the solar panel increases, the size of the robot to handle the panel increased also. The change in scale of the robot inevitably results ill the amplification of the adverse effect of tile flexure. The main source of the flexure in the large scale solar cell panel handling system is the long and thin fork fingers of the [land and the solar cell panel. In addition, tile belt-driven actuator system used by most of the large scale panel handling robot is another significant source of the vibration. In this paper, the flexible multi body dynamic model of a large scale solar cell panel handling robot, which is being designed and constructed with the help of Kyung Hee University, is developed. The belt-driven system in the robot is also modeled as flexible system and included ill the robot to represent the actual vibration characteristics of the actuator system. C 2013 The Chinese Society of Theoretical and Applied Mechanics. [doi： 10.1063/2.1301310]
