AIM:To evaluate the efficacy and safety of perfluoro-n-octane(PFO)for ophthalmic surgery versus F-Octane as an intraoperative tamponade in pars plana vitrectomy(PPV)in management of retinal detachment.METHODS:This mul...AIM:To evaluate the efficacy and safety of perfluoro-n-octane(PFO)for ophthalmic surgery versus F-Octane as an intraoperative tamponade in pars plana vitrectomy(PPV)in management of retinal detachment.METHODS:This multicenter,prospective,randomized,double-masked,parallel-controlled,non-inferiority trial was conducted in three ophthalmology clinical centers in China.Patients with retinal detachment,who were eligible for PPV were consecutively enrolled.Participants were assigned to PFO for ophthalmic surgery or F-Octane for intraocular tamponade in a 1:1 ratio.Best-corrected visual acuity(BCVA),intraocular pressure(IOP)measurement,and dilated fundus examination were performed preoperatively and at 1,7±1,28±3d postoperatively.The primary outcome was complete retinal reattachment rate at postoperative day one.The non-inferiority margin was set at 9.8%.The secondary outcomes included intraoperative retinal reattachment rate,and mean changes in IOP and BCVA from baseline to 1,7±1,28±3d postoperatively,respectively.Safety analyses were presented for all randomly assigned participates in this study.RESULTS:Totally 124 eligible patients completed the study between Mar.14,2016 and Jun.7,2017.Sixty of them were randomly assigned to the PFO for ophthalmic surgery group,and 64 were assigned to the F-Octane group.Baseline characteristics were comparable between the two groups.Both groups achieved 100%retinal reattachment at postoperative day one(difference 0,95%CI:-6.21%to 5.75%,P=1).The pre-defined noninferiority criterion was met.No significant difference was observed in intraoperative retinal reattachment rate(difference 1.77%,P=0.61),mean changes in IOP(difference 0.36,-0.09,2.22 mm Hg at 1,7±1,28±3d postoperatively,with all P>0.05)and BCVA(difference 0.04,-0.02,0.06 logMAR at 1,7±1,28±3d postoperatively,all P>0.05)between the two groups.No apparent adverse events related to the utilization of PFO were reported.CONCLUSION:In patients with retinal detachment undergoing PPV,PFO for ophthalmic surgery is non-inferior to F-Octane as an intraocular tamponade,and both are safe and well-tolerated.展开更多
The power conversion efficiency(PCE)for single-junction organic solar cells(OSCs),wherein the photoactive layer is a typical bulk-heterojunction containing donor and acceptor materials,has surpassed 19%[1−4].The advan...The power conversion efficiency(PCE)for single-junction organic solar cells(OSCs),wherein the photoactive layer is a typical bulk-heterojunction containing donor and acceptor materials,has surpassed 19%[1−4].The advance is ascribed to the development of Y-series non-fullerene acceptors(NFAs)[5,6]and polymer donors[7−13],and the refined control of the blend film morphology.展开更多
This article analyzes the application strategies of shotcrete anchor support technology using a highway bridge-tunnel construction project as an example.The article covers various strategies,including support plan for...This article analyzes the application strategies of shotcrete anchor support technology using a highway bridge-tunnel construction project as an example.The article covers various strategies,including support plan formulation,mortar shotcrete anchor construction,grid steel frame construction,steel mesh construction,and concrete support construction.This analysis aims to provide a guideline for those interested in applying this technology and improving the quality and safety of highway bridges and tunnels construction.展开更多
Traumatic brain injury is a serious medical condition that can be attributed to falls, motor vehicle accidents, sports injuries and acts of violence, causing a series of neural injuries and neuropsychiatric symptoms. ...Traumatic brain injury is a serious medical condition that can be attributed to falls, motor vehicle accidents, sports injuries and acts of violence, causing a series of neural injuries and neuropsychiatric symptoms. However, limited accessibility to the injury sites, complicated histological and anatomical structure, intricate cellular and extracellular milieu, lack of regenerative capacity in the native cells, vast variety of damage routes, and the insufficient time available for treatment have restricted the widespread application of several therapeutic methods in cases of central nervous system injury. Tissue engineering and regenerative medicine have emerged as innovative approaches in the field of nerve regeneration. By combining biomaterials, stem cells, and growth factors, these approaches have provided a platform for developing effective treatments for neural injuries, which can offer the potential to restore neural function, improve patient outcomes, and reduce the need for drugs and invasive surgical procedures. Biomaterials have shown advantages in promoting neural development, inhibiting glial scar formation, and providing a suitable biomimetic neural microenvironment, which makes their application promising in the field of neural regeneration. For instance, bioactive scaffolds loaded with stem cells can provide a biocompatible and biodegradable milieu. Furthermore, stem cells-derived exosomes combine the advantages of stem cells, avoid the risk of immune rejection, cooperate with biomaterials to enhance their biological functions, and exert stable functions, thereby inducing angiogenesis and neural regeneration in patients with traumatic brain injury and promoting the recovery of brain function. Unfortunately, biomaterials have shown positive effects in the laboratory, but when similar materials are used in clinical studies of human central nervous system regeneration, their efficacy is unsatisfactory. Here, we review the characteristics and properties of various bioactive materials, followed by the introduction of applications based on biochemistry and cell molecules, and discuss the emerging role of biomaterials in promoting neural regeneration. Further, we summarize the adaptive biomaterials infused with exosomes produced from stem cells and stem cells themselves for the treatment of traumatic brain injury. Finally, we present the main limitations of biomaterials for the treatment of traumatic brain injury and offer insights into their future potential.展开更多
Nickel-manganese binary layered oxides with high working potential and low cost are potential candidates for sodium-ion batteries,but their electrochemical properties are highly related to compositional diversity.Dive...Nickel-manganese binary layered oxides with high working potential and low cost are potential candidates for sodium-ion batteries,but their electrochemical properties are highly related to compositional diversity.Diverse composite materials with various phase structures of P3,P2/P3,P2,P2/O3,and P2/P3/O3 were synthesized by manipulating the sodium content and calcination conditions,leading to the construction of a synthetic phase diagram for Na_(x)Ni_(0.25)Mn_(0.75)O_(2)(0.45≤x≤1.1).Then,we compared the electrochemical characteristics and structural evolution during the desodiation/sodiation process of P2,P2/P3,P2/03,and P2/P3/O3-Na_(x)Ni_(0.25)Mn_(0.75)O_(2).Among them,P2/P3-Na0.75Ni0.25Mn0.75O2exhibits the best rate capability of 90.9 mA h g^(-1)at 5 C,with an initial discharge capacity of 142.62 mA h g^(-1)at 0.1 C and a capacity retention rate of 78.25%after 100 cycles at 1 C in the voltage range of 2-4.3 V.The observed superior sodium storage performance of P2/P3 hybrids compared to other composite phases can be attributed to the enhanced Na^(+)transfer dynamic,reduction of the Jahn-teller effect,and improved reaction reversibility induced by the synergistic effect of P2 and P3 phases.The systematic research and exploration of phases in Na_(x)Ni_(0.25)Mn_(0.75)O_(2)provide new sights into high-performance nickel-manganese binary layered oxide for sodium-ion batteries.展开更多
Biomimetic materials have emerged as attractive and competitive alternatives for tissue engineering(TE)and regenerative medicine.In contrast to conventional biomaterials or synthetic materials,biomimetic scaffolds bas...Biomimetic materials have emerged as attractive and competitive alternatives for tissue engineering(TE)and regenerative medicine.In contrast to conventional biomaterials or synthetic materials,biomimetic scaffolds based on natural biomaterial can offer cells a broad spectrum of biochemical and biophysical cues that mimic the in vivo extracellular matrix(ECM).Additionally,such materials have mechanical adaptability,micro-structure interconnectivity,and inherent bioactivity,making them ideal for the design of living implants for specific applications in TE and regenerative medicine.This paper provides an overview for recent progress of biomimetic natural biomaterials(BNBMs),including advances in their preparation,functionality,potential applications and future challenges.We highlight recent advances in the fabrication of BNBMs and outline general strategies for functionalizing and tailoring the BNBMs with various biological and physicochemical characteristics of native ECM.Moreover,we offer an overview of recent key advances in the functionalization and applications of versatile BNBMs for TE applications.Finally,we conclude by offering our perspective on open challenges and future developments in this rapidly-evolving field.展开更多
Peripheral nerve injuries remain a challenging problem in need of better treatment strategies.Despite best efforts at surgical reconstruction and postoperative rehabilitation,patients are often left with persistent,de...Peripheral nerve injuries remain a challenging problem in need of better treatment strategies.Despite best efforts at surgical reconstruction and postoperative rehabilitation,patients are often left with persistent,debilitating motor and sensory deficits.There are currently no therapeutic strategies proven to enhance the regenerative process in humans.A clinical need exists for the development of technologies to promote nerve regeneration and improve functional outcomes.Recent advances in the fields of tissue engineering and nanotechnology have enabled biomaterial scaffolds to modulate the host response to tissue repair through tailored mechanical,chemical,and conductive cues.New bioengineered approaches have enabled targeted,sustained delivery of protein therapeutics with the capacity to unlock the clinical potential of a myriad of neurotrophic growth factors that have demonstrated promise in enhancing regenerative outcomes.As such,further exploration of combinatory strategies leveraging these technological advances may offer a pathway towards clinically translatable solutions to advance the care of patients with peripheral nerve injuries.This review first presents the various emerging bioengineering strategies that can be applied for the management of nerve gap injuries.We cover the rationale and limitations for their use as an alternative to autografts,focusing on the approaches to increase the number of regenerating axons crossing the repair site,and facilitating their growth towards the distal stump.We also discuss the emerging growth factor-based therapeutic strategies designed to improve functional outcomes in a multimodal fashion,by accelerating axonal growth,improving the distal regenerative environment,and preventing end-organs atrophy.展开更多
Heavy-metal-free ternary Cu–In–Se quantum dots(CISe QDs)are promising for solar fuel production because of their low toxicity,tunable band gap,and high light absorption coefficient.Although defects significantly aff...Heavy-metal-free ternary Cu–In–Se quantum dots(CISe QDs)are promising for solar fuel production because of their low toxicity,tunable band gap,and high light absorption coefficient.Although defects significantly affect the photophysical properties of QDs,the influence on photoelectrochemical hydrogen production is not well understood.Herein,we present the defect engineering of CISe QDs for efficient solar-energy conversion.Lewis acid–base reactions between metal halide–oleylamine complexes and oleylammonium selenocarbamate are modulated to achieve CISe QDs with the controlled amount of Cu vacancies without changing their morphology.Among them,CISe QDs with In/Cu=1.55 show the most outstanding photoelectrochemical hydrogen generation with excellent photocurrent density of up to 10.7 mA cm-2(at 0.6 VRHE),attributed to the suitable electronic band structures and enhanced carrier concentrations/lifetimes of the QDs.The proposed method,which can effectively control the defects in heavy-metal-free ternary QDs,offers a deeper understanding of the effects of the defects and provides a practical approach to enhance photoelectrochemical hydrogen generation.展开更多
With the rapid development of science and technology,the minimally invasive surgery(MIS)has become a reality.MIS is associated with less pain,a shorter hospital stay and fewer complications.The higher-quality minimall...With the rapid development of science and technology,the minimally invasive surgery(MIS)has become a reality.MIS is associated with less pain,a shorter hospital stay and fewer complications.The higher-quality minimally invasive instruments allow the surgeons to perform the surgical interventions efficiently without sacrificing patient safety.Therefore,the academic research,technology development,achievement transformation as well as clinical application of minimally invasive devices is extremely important。展开更多
The activation of H_(2)O is a key step of the COS hydrolysis,which may be tuned by oxygen vacancy defects in the catalysts.Herein,we have introduced Cu into Co_(3)O_(4) to regulate the oxygen vacancy defect content of...The activation of H_(2)O is a key step of the COS hydrolysis,which may be tuned by oxygen vacancy defects in the catalysts.Herein,we have introduced Cu into Co_(3)O_(4) to regulate the oxygen vacancy defect content of the catalysts.In situ DRIFTS and XPS spectra reveal that COS and H_(2)O are adsorbed and activated by oxygen vacancy.The 10 at%Cu doped Co_(3)O_(4) sample(10Cu-Co_(3)O_(4))exhibits the optimal activity,100%of COS conversion at 70℃.The improved oxygen vacancies of CueCo_(3)O_(4) accelerate the activation of H_(2)O to form active -OH.COS binds with hydroxyl to form the intermediate HSCO^(-)_(2),and then the activated-OH on the oxygen vacancy reacts with HSCO^(-)_(2) to form HCO^(-)_(3).Meanwhile,the catalyst exhibits high catalytic stability because copper species(Cu+/Cu^(2+))redox cycle mitigate the sulfation of Co_(3)O_(4)(Co^(2+)/Co^(3+)).Our work offers a promising approach for the rational design of cobalt-related catalysts in the highly efficient hydrolysis COS process.展开更多
In the original publication of the article(Cui and Pan,2023),the organization“National Engineering Research Center for Port Hydraulic Construction Technology,M.O.T.,Tianjin Research Institute of Water Transport Engin...In the original publication of the article(Cui and Pan,2023),the organization“National Engineering Research Center for Port Hydraulic Construction Technology,M.O.T.,Tianjin Research Institute of Water Transport Engineering,Tianjin 300456,China”should be corrected as:“National Engineering Research Center of Port Hydraulic Construction Technology,Tianjin Research Institute for Water Transport Engineering,M.O.T.,Tianjin 300456,China”.展开更多
Bimetallic nanoparticles exhibit a synergistic effect that critically depends on their surface composition,but such promotion mechanisms become vague with varying surface compositions.Here,alumina supported Ag@Pd core...Bimetallic nanoparticles exhibit a synergistic effect that critically depends on their surface composition,but such promotion mechanisms become vague with varying surface compositions.Here,alumina supported Ag@Pd core–shell and PdAg alloy structure with controlled size and surface compositions were prepared to demonstrate synergetic mechanisms,particularly,ligand and strain effects on activity and ethylene selectivity for acetylene hydrogenation.The performance evaluation indicates that Ag@Pd catalysts with well-controlled Pd-shell thickness can effectively lower apparent activation energy and improve ethylene selectivity.Hydrogenation activity increases from 0.019 to 0.062 s^(-1) with decreasing Pd-shell thickness under mild conditions,which is 3–6 times higher than their alloyed and monometallic counterparts.Combined characterizations and density functional theory are conducted to reveal such shell-thickness-dependent performance.The ligand effect arising from Ag alloying in the interface of Ag@Pd2ML observes the strongest binding of acetylene,but it diminished sharply and the strain effect gets more prevailing with increasing shell thickness.The competition of ethylene desorption and deephydrogenation were also investigated to understand the selectivity governing factors,and the selectivity descriptor(0.5BE(C_(2)H_(4))–BE(H))was built to match the contribution of ligand and strain effect on the different surfaces of Pd-Ag bimetallic NPs.The exploration of synergetic mechanisms among bimetallic NPs with varied structure and surface compositions in this work can help us to deepen the understanding catalyst structure–activity relationship and provide a feasible way to optimize the overall catalytic performance.展开更多
Piezoelectricity in native bones has been well recognized as the key factor in bone regeneration.Thus,bio-piezoelectric materials have gained substantial attention in repairing damaged bone by mimicking the tissue’s ...Piezoelectricity in native bones has been well recognized as the key factor in bone regeneration.Thus,bio-piezoelectric materials have gained substantial attention in repairing damaged bone by mimicking the tissue’s electrical microenvironment(EM).However,traditional manufacturing strategies still encounter limitations in creating personalized bio-piezoelectric scaffolds,hindering their clinical applications.Three-dimensional(3D)/four-dimensional(4D)printing technology based on the principle of layer-by-layer forming and stacking of discrete materials has demonstrated outstanding advantages in fabricating bio-piezoelectric scaffolds in a more complex-shaped structure.Notably,4D printing functionality-shifting bio-piezoelectric scaffolds can provide a time-dependent programmable tissue EM in response to external stimuli for bone regeneration.In this review,we first summarize the physicochemical properties of commonly used bio-piezoelectric materials(including polymers,ceramics,and their composites)and representative biological findings for bone regeneration.Then,we discuss the latest research advances in the 3D printing of bio-piezoelectric scaffolds in terms of feedstock selection,printing process,induction strategies,and potential applications.Besides,some related challenges such as feedstock scalability,printing resolution,stress-to-polarization conversion efficiency,and non-invasive induction ability after implantation have been put forward.Finally,we highlight the potential of shape/property/functionality-shifting smart 4D bio-piezoelectric scaffolds in bone tissue engineering(BTE).Taken together,this review emphasizes the appealing utility of 3D/4D printed biological piezoelectric scaffolds as next-generation BTE implants.展开更多
Aiming at the problem that the existing ankle rehabilitation robot is difficult to fully fit the complex motion of human ankle joint and has poor human-machine motion compatibility,an equivalent series mechanism model...Aiming at the problem that the existing ankle rehabilitation robot is difficult to fully fit the complex motion of human ankle joint and has poor human-machine motion compatibility,an equivalent series mechanism model that is highly matched with the actual bone structure of the human ankle joint is proposed and mapped into a parallel rehabilita-tion mechanism.The parallel rehabilitation mechanism has two virtual motion centers(VMCs),which can simulate the complex motion of the ankle joint,adapt to the individual differences of various patients,and can meet the reha-bilitation needs of both left and right feet of patients.Firstly,based on the motion properties and physiological structure of the human ankle joint,the mapping relationship between the rehabilitation mechanism and ankle joint is determined,and the series equivalent model of the ankle joint is established.According to the kinematic and con-straint properties of the ankle equivalent model,the configuration design of the parallel ankle rehabilitation robot is carried out.Secondly,according to the intersecting motion planes theory,the full-cycle mobility of the mechanism is proved,and the continuous axis of the mechanism is judged based on the constraint power and its derivative.Then,the kinematics of the parallel ankle rehabilitation robot is analyzed.Finally,based on the OpenSim biomechanical soft-ware,a human-machine coupling rehabilitation simulation model is established to evaluate the rehabilitation effect,which lays the foundation for the formulation of a rehabilitation strategy for the later prototype.展开更多
Background:Previous single-center studies have demonstrated that drug-coated balloons(DCBs)may reduce restenosis rates,which is an important factor affecting the prognosis for intracranial interventional therapy.Howev...Background:Previous single-center studies have demonstrated that drug-coated balloons(DCBs)may reduce restenosis rates,which is an important factor affecting the prognosis for intracranial interventional therapy.However,currently available cardiac DCBs are not always suitable for the treatment of intracranial atherosclerotic stenosis(ICAS).This study aimed to evaluate the safety and efficacy of a novel DCB catheter designed for patients with severely symptomatic ICAS.Methods:This prospective,multicenter,single-arm,target-value clinical trial was conducted in 9 Chinese stroke centers to evaluate the safety and efficacy of a novel DCB catheter for treating symptomatic severe ICAS.Primary metrics and other indicators were collected and analyzed using SAS version 9.4(SAS Institute,Cary,NC,USA).Results:A total of 155 patients were enrolled in this study.The preliminary collection of follow-up data has been completed,while data quality control is ongoing.Conclusion:Results of this study demonstrated the patency rate,safety,and effectiveness of a novel on-label paclitaxel DCB designed for the treatment of ICAS.Ethics and dissemination:This study,involving human participants,was reviewed and approved by the Ethics Committee of Drugs(Devices)Clinical Experiment at Henan Provincial People’s Hospital(reference number:2020-145-03)and other research centers participating in the clinical trial.The results of this study will be presented at international conferences and sent to peer-reviewed journals for publication.Standard protocol items:The Recommendations for Interventional Trials checklist was used when drafting the study protocol.Trial registration number:Registered with the Chinese Clinical Trial Registry on June 11,2021(Chi CTR2100047223).展开更多
Torquigener albomaculosus,also known as the white-spotted pufferfish,is known for creating circular nests in the underwater sand as part of the mating ritual.The nests are built by the males to attract females through...Torquigener albomaculosus,also known as the white-spotted pufferfish,is known for creating circular nests in the underwater sand as part of the mating ritual.The nests are built by the males to attract females through the nest’s impressive design and related ability to gather fine sand particles.As the fluid-dynamic processes associated with these unique nests are still almost completely unknown,in the present study,an analysis has been conducted to investigate how the geometric parameters related to the nest design influence the fluid velocity in its center.For this reason,a geometric model of the nest consisting of 24 channels,where each unit channel can be described by three strips of broken lines,has been introduced,and a multivariate analysis has been implemented to determine the relative weight of each considered parameter.In particular,the“optimal”combination of parameters has been obtained by means of an orthogonal design approach.We show that these bio-nest structures also display a potential for significant application in marine litter collection,or for use as a buffer against the waves in offshore areas.展开更多
Electrochemical carbon dioxide reduction reaction(CO_(2)RR)provides an attractive approach to carbon capture and utilization for the production high-value-added products.However,CO_(2)RR still suffers from poor select...Electrochemical carbon dioxide reduction reaction(CO_(2)RR)provides an attractive approach to carbon capture and utilization for the production high-value-added products.However,CO_(2)RR still suffers from poor selectivity and low current density due to its sluggish kinetics and multitudinous reaction pathways.Single-atom catalysts(SACs)demonstrate outstanding activity,excellent selectivity,and remarkable atom utilization efficiency,which give impetus to the search for electrocatalytic processes aiming at high selectivity.There appears significant activity in the development of efficient SACs for CO_(2)RR,while the density of the atomic sites remains a considerable barrier to be overcome.To construct high-metal-loading SACs,aggregation must be prevented,and thus novel strategies are required.The key to creating high-density atomically dispersed sites is designing enough anchoring sites,normally defects,to stabilize the highly mobile separated metal atoms.In this review,we summarized the advances in developing high-loading SACs through defect engineering,with a focus on the synthesis strategies to achieve high atomic site loading.Finally,the future opportunities and challenges for CO_(2)RR in the area of high-loading single-atom electrocatalysts are also discussed.展开更多
Conductor and suction anchor are the key equipment providing bearing capacity in the field of deep-water drilling or offshore engineering,which have the advantages of high operation efficiency and short construction p...Conductor and suction anchor are the key equipment providing bearing capacity in the field of deep-water drilling or offshore engineering,which have the advantages of high operation efficiency and short construction period.In order to drill a horizontal well in the shallow hydrate reservoir in the deep water,the suction anchor wellhead assembly is employed to undertake the main vertical bearing capacity in the second round of hydrate trial production project,so as to reduce the conductor running depth and heighten the kick-off point position.However,the deformation law of the deep-water suction anchor wellhead assembly under the moving load of the riser is not clear,and it is necessary to understand the lateral bearing characteristics to guide the design of its structural scheme.Based on 3D solid finite element method,the solid finite element model of the suction anchor wellhead assembly is established.In the model,the seabed soil is divided into seven layers,the contact between the wellhead assembly and the soil is simulated,and the vertical load and bending moment are applied to the wellhead node to simulate the riser movement when working in the deep water.The lateral bearing stability of conventional wellhead assembly and suction anchor wellhead assembly under the influence of wellhead load is discussed.The analysis results show that the bending moment is the main factor affecting the lateral deformation of the wellhead string;the anti-bending performance from increasing the outer conductor diameter is better than that from increasing the conductor wall thickness;for the subsea wellhead,the suction anchor obviously improves the lateral bearing capacity and reduces the lateral deformation.The conduct of the suction anchor wellhead assembly still needs to be lowered to a certain depth that below the maximum disturbed depth to ensure the lateral bearing stability,Thus,a method for the minimum conductor running depth for the suction anchor wellhead assembly is developed.The field implementations show that compared with the first round of hydrate trial production project,the conductor running depth is increased by 9.42 m,and there is no risk of wellhead overturning during the trial production.The method for determining the minimum conductor running depth in this paper is feasible and will still play an important role in the subsequent hydrate exploration and development.展开更多
Attracted by high energy density and considerable conductivity of selenium(Se),Na-Se batteries have been deemed promising energy-storage systems.But,it still suffers from sluggish kinetic behaviors and similar“shuttl...Attracted by high energy density and considerable conductivity of selenium(Se),Na-Se batteries have been deemed promising energy-storage systems.But,it still suffers from sluggish kinetic behaviors and similar“shuttling effect”to S-electrodes.Herein,utilizing uniform hollow carbon spheres as precursors,Se-material is effectively loaded through vapor-infiltration method.Owing to the distribution of optimized pores,the content of microspores could be up to~60%(<2 nm),serving important roles for the physical confinement effect.Meanwhile,the rich oxygen-containing groups and N-elements could be noted,inducing the evolution of electron-moving behaviors.More significantly,assisted by the interfacial C-Se bonds and tiny Se distributions,Se electrodes are activated during cycling.Used as cathodes for Na-Se systems,the as-resulted samples display a capacity of 593.9 mA h g^(-1)after 100 cycles at the current density of 0.1 C.Even after 6000 cycles,the capacity could be still kept at about 225 mA h g^(-1)at 5.0 C.Supported by the detailed kinetic analysis,the designed microspores size induces the increasing redox reaction of nano Se,whilst the surface traits further render the enhancement of pseudo-capacitive contributions.Moreover,after cycling,the product Sex(x<4)in pores serves as the primary active material.Given this,the work is anticipated to provide an effective strategy for advanced electrodes for Na-Se systems.展开更多
Hepatocellular carcinoma(HCC)is one of most common and deadliest malignancies.Celastrol(Cel),a natural product derived from the Tripterygium wilfordii plant,has been extensively researched for its potential effectiven...Hepatocellular carcinoma(HCC)is one of most common and deadliest malignancies.Celastrol(Cel),a natural product derived from the Tripterygium wilfordii plant,has been extensively researched for its potential effectiveness in fighting cancer.However,its clinical application has been hindered by the unclear mechanism of action.Here,we used chemical proteomics to identify the direct targets of Cel and enhanced its targetability and antitumor capacity by developing a Cel-based liposomes in HCC.We demonstrated that Cel selectively targets the voltage-dependent anion channel 2(VDAC2).Cel directly binds to the cysteine residues of VDAC2,and induces cytochrome C release via dysregulating VDAC2-mediated mitochondrial permeability transition pore(mPTP)function.We further found that Cel induces ROS-mediated ferroptosis and apoptosis in HCC cells.Moreover,coencapsulation of Cel into alkyl glucoside-modified liposomes(AGCL)improved its antitumor efficacy and minimized its side effects.AGCL has been shown to effectively suppress the proliferation of tumor cells.In a xenograft nude mice experiment,AGCL significantly inhibited tumor growth and promoted apoptosis.Our findings reveal that Cel directly targets VDAC2 to induce mitochondria-dependent cell death,while the Cel liposomes enhance its targetability and reduces side effects.Overall,Cel shows promise as a therapeutic agent for HCC.展开更多
基金Supported by the Program of Shanghai Academic/Technology Research Leader(No.21XD1402700)the Clinical Research Plan of Shenkang Hospital Development Center of Shanghai(No.SHDC2022CRD001).
文摘AIM:To evaluate the efficacy and safety of perfluoro-n-octane(PFO)for ophthalmic surgery versus F-Octane as an intraoperative tamponade in pars plana vitrectomy(PPV)in management of retinal detachment.METHODS:This multicenter,prospective,randomized,double-masked,parallel-controlled,non-inferiority trial was conducted in three ophthalmology clinical centers in China.Patients with retinal detachment,who were eligible for PPV were consecutively enrolled.Participants were assigned to PFO for ophthalmic surgery or F-Octane for intraocular tamponade in a 1:1 ratio.Best-corrected visual acuity(BCVA),intraocular pressure(IOP)measurement,and dilated fundus examination were performed preoperatively and at 1,7±1,28±3d postoperatively.The primary outcome was complete retinal reattachment rate at postoperative day one.The non-inferiority margin was set at 9.8%.The secondary outcomes included intraoperative retinal reattachment rate,and mean changes in IOP and BCVA from baseline to 1,7±1,28±3d postoperatively,respectively.Safety analyses were presented for all randomly assigned participates in this study.RESULTS:Totally 124 eligible patients completed the study between Mar.14,2016 and Jun.7,2017.Sixty of them were randomly assigned to the PFO for ophthalmic surgery group,and 64 were assigned to the F-Octane group.Baseline characteristics were comparable between the two groups.Both groups achieved 100%retinal reattachment at postoperative day one(difference 0,95%CI:-6.21%to 5.75%,P=1).The pre-defined noninferiority criterion was met.No significant difference was observed in intraoperative retinal reattachment rate(difference 1.77%,P=0.61),mean changes in IOP(difference 0.36,-0.09,2.22 mm Hg at 1,7±1,28±3d postoperatively,with all P>0.05)and BCVA(difference 0.04,-0.02,0.06 logMAR at 1,7±1,28±3d postoperatively,all P>0.05)between the two groups.No apparent adverse events related to the utilization of PFO were reported.CONCLUSION:In patients with retinal detachment undergoing PPV,PFO for ophthalmic surgery is non-inferior to F-Octane as an intraocular tamponade,and both are safe and well-tolerated.
基金supported by the National Natural Science Foundation of China (52373175)High-level Innovative Talents Foundation of Guizhou Province (QKHPTRCGCC[2023]024)+3 种基金Science and Technology Innovation Team of Higher Education Department of Guizhou Province(QJJ[2023]053)Natural Science Foundation of Guizhou University (GZUTGH[2023]12, GZUTGH[2023]71)National Key Research and Development Program of China(2022YFB3803300, 2023YFE0116800)Beijing Natural Science Foundation (IS23037)
文摘The power conversion efficiency(PCE)for single-junction organic solar cells(OSCs),wherein the photoactive layer is a typical bulk-heterojunction containing donor and acceptor materials,has surpassed 19%[1−4].The advance is ascribed to the development of Y-series non-fullerene acceptors(NFAs)[5,6]and polymer donors[7−13],and the refined control of the blend film morphology.
文摘This article analyzes the application strategies of shotcrete anchor support technology using a highway bridge-tunnel construction project as an example.The article covers various strategies,including support plan formulation,mortar shotcrete anchor construction,grid steel frame construction,steel mesh construction,and concrete support construction.This analysis aims to provide a guideline for those interested in applying this technology and improving the quality and safety of highway bridges and tunnels construction.
基金supported by the Sichuan Science and Technology Program,No.2023YFS0164 (to JC)。
文摘Traumatic brain injury is a serious medical condition that can be attributed to falls, motor vehicle accidents, sports injuries and acts of violence, causing a series of neural injuries and neuropsychiatric symptoms. However, limited accessibility to the injury sites, complicated histological and anatomical structure, intricate cellular and extracellular milieu, lack of regenerative capacity in the native cells, vast variety of damage routes, and the insufficient time available for treatment have restricted the widespread application of several therapeutic methods in cases of central nervous system injury. Tissue engineering and regenerative medicine have emerged as innovative approaches in the field of nerve regeneration. By combining biomaterials, stem cells, and growth factors, these approaches have provided a platform for developing effective treatments for neural injuries, which can offer the potential to restore neural function, improve patient outcomes, and reduce the need for drugs and invasive surgical procedures. Biomaterials have shown advantages in promoting neural development, inhibiting glial scar formation, and providing a suitable biomimetic neural microenvironment, which makes their application promising in the field of neural regeneration. For instance, bioactive scaffolds loaded with stem cells can provide a biocompatible and biodegradable milieu. Furthermore, stem cells-derived exosomes combine the advantages of stem cells, avoid the risk of immune rejection, cooperate with biomaterials to enhance their biological functions, and exert stable functions, thereby inducing angiogenesis and neural regeneration in patients with traumatic brain injury and promoting the recovery of brain function. Unfortunately, biomaterials have shown positive effects in the laboratory, but when similar materials are used in clinical studies of human central nervous system regeneration, their efficacy is unsatisfactory. Here, we review the characteristics and properties of various bioactive materials, followed by the introduction of applications based on biochemistry and cell molecules, and discuss the emerging role of biomaterials in promoting neural regeneration. Further, we summarize the adaptive biomaterials infused with exosomes produced from stem cells and stem cells themselves for the treatment of traumatic brain injury. Finally, we present the main limitations of biomaterials for the treatment of traumatic brain injury and offer insights into their future potential.
基金supported by project from the National Natural Science Foundation of China(21805018)by the Sichuan Science and Technology Program(2022ZHCG0018,2023NSFSC0117,2023ZHCG0060)+1 种基金the Yibin Science and Technology Program(2022JB005)project funded by the China Postdoctoral Science Foundation(2022M722704)。
文摘Nickel-manganese binary layered oxides with high working potential and low cost are potential candidates for sodium-ion batteries,but their electrochemical properties are highly related to compositional diversity.Diverse composite materials with various phase structures of P3,P2/P3,P2,P2/O3,and P2/P3/O3 were synthesized by manipulating the sodium content and calcination conditions,leading to the construction of a synthetic phase diagram for Na_(x)Ni_(0.25)Mn_(0.75)O_(2)(0.45≤x≤1.1).Then,we compared the electrochemical characteristics and structural evolution during the desodiation/sodiation process of P2,P2/P3,P2/03,and P2/P3/O3-Na_(x)Ni_(0.25)Mn_(0.75)O_(2).Among them,P2/P3-Na0.75Ni0.25Mn0.75O2exhibits the best rate capability of 90.9 mA h g^(-1)at 5 C,with an initial discharge capacity of 142.62 mA h g^(-1)at 0.1 C and a capacity retention rate of 78.25%after 100 cycles at 1 C in the voltage range of 2-4.3 V.The observed superior sodium storage performance of P2/P3 hybrids compared to other composite phases can be attributed to the enhanced Na^(+)transfer dynamic,reduction of the Jahn-teller effect,and improved reaction reversibility induced by the synergistic effect of P2 and P3 phases.The systematic research and exploration of phases in Na_(x)Ni_(0.25)Mn_(0.75)O_(2)provide new sights into high-performance nickel-manganese binary layered oxide for sodium-ion batteries.
基金supported by the National Natural Science Foundation of China(52003113,31900950,82102334,82002313,82072444)the National Key Research&Development Program of China(2018YFC2001502,2018YFB1105705)+6 种基金the Guangdong Basic and Applied Basic Research Foundation(2021A1515010745,2020A1515110356,2023A1515011986)the Shenzhen Fundamental Research Program(JCYJ20190808120405672)the Key Program of the National Natural Science Foundation of Zhejiang Province(LZ22C100001)the Natural Science Foundation of Shanghai(20ZR1469800)the Integration Innovation Fund of Shanghai Jiao Tong University(2021JCPT03),the Science and Technology Projects of Guangzhou City(202102020359)the Zigong Key Science and Technology Plan(2022ZCNKY07).SXC thanks the financial support under the Startup Grant of the University of Chinese Academy of Sciences(WIUCASQD2021026).HW thanks the Futian Healthcare Research Project(FTWS2022013)the financial support of China Postdoctoral Science Foundation(2021TQ0118).SL thanks the financial support of China Postdoctoral Science Foundation(2022M721490).
文摘Biomimetic materials have emerged as attractive and competitive alternatives for tissue engineering(TE)and regenerative medicine.In contrast to conventional biomaterials or synthetic materials,biomimetic scaffolds based on natural biomaterial can offer cells a broad spectrum of biochemical and biophysical cues that mimic the in vivo extracellular matrix(ECM).Additionally,such materials have mechanical adaptability,micro-structure interconnectivity,and inherent bioactivity,making them ideal for the design of living implants for specific applications in TE and regenerative medicine.This paper provides an overview for recent progress of biomimetic natural biomaterials(BNBMs),including advances in their preparation,functionality,potential applications and future challenges.We highlight recent advances in the fabrication of BNBMs and outline general strategies for functionalizing and tailoring the BNBMs with various biological and physicochemical characteristics of native ECM.Moreover,we offer an overview of recent key advances in the functionalization and applications of versatile BNBMs for TE applications.Finally,we conclude by offering our perspective on open challenges and future developments in this rapidly-evolving field.
基金supported by The Plastic Surgery Foundation Research Pilot Grant,No.627383(to KAS).
文摘Peripheral nerve injuries remain a challenging problem in need of better treatment strategies.Despite best efforts at surgical reconstruction and postoperative rehabilitation,patients are often left with persistent,debilitating motor and sensory deficits.There are currently no therapeutic strategies proven to enhance the regenerative process in humans.A clinical need exists for the development of technologies to promote nerve regeneration and improve functional outcomes.Recent advances in the fields of tissue engineering and nanotechnology have enabled biomaterial scaffolds to modulate the host response to tissue repair through tailored mechanical,chemical,and conductive cues.New bioengineered approaches have enabled targeted,sustained delivery of protein therapeutics with the capacity to unlock the clinical potential of a myriad of neurotrophic growth factors that have demonstrated promise in enhancing regenerative outcomes.As such,further exploration of combinatory strategies leveraging these technological advances may offer a pathway towards clinically translatable solutions to advance the care of patients with peripheral nerve injuries.This review first presents the various emerging bioengineering strategies that can be applied for the management of nerve gap injuries.We cover the rationale and limitations for their use as an alternative to autografts,focusing on the approaches to increase the number of regenerating axons crossing the repair site,and facilitating their growth towards the distal stump.We also discuss the emerging growth factor-based therapeutic strategies designed to improve functional outcomes in a multimodal fashion,by accelerating axonal growth,improving the distal regenerative environment,and preventing end-organs atrophy.
基金the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(grant nos.2021R1C1C1007844,2021M3I3A1085039,2020R1F1A1061505,and 2020R1C1C1012014).
文摘Heavy-metal-free ternary Cu–In–Se quantum dots(CISe QDs)are promising for solar fuel production because of their low toxicity,tunable band gap,and high light absorption coefficient.Although defects significantly affect the photophysical properties of QDs,the influence on photoelectrochemical hydrogen production is not well understood.Herein,we present the defect engineering of CISe QDs for efficient solar-energy conversion.Lewis acid–base reactions between metal halide–oleylamine complexes and oleylammonium selenocarbamate are modulated to achieve CISe QDs with the controlled amount of Cu vacancies without changing their morphology.Among them,CISe QDs with In/Cu=1.55 show the most outstanding photoelectrochemical hydrogen generation with excellent photocurrent density of up to 10.7 mA cm-2(at 0.6 VRHE),attributed to the suitable electronic band structures and enhanced carrier concentrations/lifetimes of the QDs.The proposed method,which can effectively control the defects in heavy-metal-free ternary QDs,offers a deeper understanding of the effects of the defects and provides a practical approach to enhance photoelectrochemical hydrogen generation.
文摘With the rapid development of science and technology,the minimally invasive surgery(MIS)has become a reality.MIS is associated with less pain,a shorter hospital stay and fewer complications.The higher-quality minimally invasive instruments allow the surgeons to perform the surgical interventions efficiently without sacrificing patient safety.Therefore,the academic research,technology development,achievement transformation as well as clinical application of minimally invasive devices is extremely important。
基金the National Natural Science Foundation of China (92034301,22078063 and 22022804)Major Program of Qingyuan Innovation Laboratory (00121003)the Natural Science Foundation of Fujian Province (2020H6007)。
文摘The activation of H_(2)O is a key step of the COS hydrolysis,which may be tuned by oxygen vacancy defects in the catalysts.Herein,we have introduced Cu into Co_(3)O_(4) to regulate the oxygen vacancy defect content of the catalysts.In situ DRIFTS and XPS spectra reveal that COS and H_(2)O are adsorbed and activated by oxygen vacancy.The 10 at%Cu doped Co_(3)O_(4) sample(10Cu-Co_(3)O_(4))exhibits the optimal activity,100%of COS conversion at 70℃.The improved oxygen vacancies of CueCo_(3)O_(4) accelerate the activation of H_(2)O to form active -OH.COS binds with hydroxyl to form the intermediate HSCO^(-)_(2),and then the activated-OH on the oxygen vacancy reacts with HSCO^(-)_(2) to form HCO^(-)_(3).Meanwhile,the catalyst exhibits high catalytic stability because copper species(Cu+/Cu^(2+))redox cycle mitigate the sulfation of Co_(3)O_(4)(Co^(2+)/Co^(3+)).Our work offers a promising approach for the rational design of cobalt-related catalysts in the highly efficient hydrolysis COS process.
文摘In the original publication of the article(Cui and Pan,2023),the organization“National Engineering Research Center for Port Hydraulic Construction Technology,M.O.T.,Tianjin Research Institute of Water Transport Engineering,Tianjin 300456,China”should be corrected as:“National Engineering Research Center of Port Hydraulic Construction Technology,Tianjin Research Institute for Water Transport Engineering,M.O.T.,Tianjin 300456,China”.
基金supported by National Key Research&Development Program of China (2022YFA1506200)the National Natural Science Foundations of China (22078007, 21627813, 21706009,22002085)+3 种基金Guangdong Basic and Applied Basic Research Foundation (2020A1515110832)the Fundamental Research Funds for the Central Universities (buctrc201921, JD2223)Innovative Achievement Commercialization Service-Platform of Industrial CatalysisChemistry and Chemical Engineering Guangdong Laboratory for a startup funding support(2111001)
文摘Bimetallic nanoparticles exhibit a synergistic effect that critically depends on their surface composition,but such promotion mechanisms become vague with varying surface compositions.Here,alumina supported Ag@Pd core–shell and PdAg alloy structure with controlled size and surface compositions were prepared to demonstrate synergetic mechanisms,particularly,ligand and strain effects on activity and ethylene selectivity for acetylene hydrogenation.The performance evaluation indicates that Ag@Pd catalysts with well-controlled Pd-shell thickness can effectively lower apparent activation energy and improve ethylene selectivity.Hydrogenation activity increases from 0.019 to 0.062 s^(-1) with decreasing Pd-shell thickness under mild conditions,which is 3–6 times higher than their alloyed and monometallic counterparts.Combined characterizations and density functional theory are conducted to reveal such shell-thickness-dependent performance.The ligand effect arising from Ag alloying in the interface of Ag@Pd2ML observes the strongest binding of acetylene,but it diminished sharply and the strain effect gets more prevailing with increasing shell thickness.The competition of ethylene desorption and deephydrogenation were also investigated to understand the selectivity governing factors,and the selectivity descriptor(0.5BE(C_(2)H_(4))–BE(H))was built to match the contribution of ligand and strain effect on the different surfaces of Pd-Ag bimetallic NPs.The exploration of synergetic mechanisms among bimetallic NPs with varied structure and surface compositions in this work can help us to deepen the understanding catalyst structure–activity relationship and provide a feasible way to optimize the overall catalytic performance.
基金supported by grants from the National Natural Science Foundation of China(52205363)Fundamental Research Funds for the Central Universities(2019kfyRCPY044 and 2021GCRC002)+3 种基金Program for HUST Academic Frontier Youth Team(2018QYTD04)Program for Innovative Research Team of the Ministry of Education(IRT1244)Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone Shenzhen Park Project:HZQB-KCZYB-2020030the Guangdong Provincial Department of Science and Technology(Key-Area Research and Development Program of Guangdong Province)under the Grant 2020B090923002。
文摘Piezoelectricity in native bones has been well recognized as the key factor in bone regeneration.Thus,bio-piezoelectric materials have gained substantial attention in repairing damaged bone by mimicking the tissue’s electrical microenvironment(EM).However,traditional manufacturing strategies still encounter limitations in creating personalized bio-piezoelectric scaffolds,hindering their clinical applications.Three-dimensional(3D)/four-dimensional(4D)printing technology based on the principle of layer-by-layer forming and stacking of discrete materials has demonstrated outstanding advantages in fabricating bio-piezoelectric scaffolds in a more complex-shaped structure.Notably,4D printing functionality-shifting bio-piezoelectric scaffolds can provide a time-dependent programmable tissue EM in response to external stimuli for bone regeneration.In this review,we first summarize the physicochemical properties of commonly used bio-piezoelectric materials(including polymers,ceramics,and their composites)and representative biological findings for bone regeneration.Then,we discuss the latest research advances in the 3D printing of bio-piezoelectric scaffolds in terms of feedstock selection,printing process,induction strategies,and potential applications.Besides,some related challenges such as feedstock scalability,printing resolution,stress-to-polarization conversion efficiency,and non-invasive induction ability after implantation have been put forward.Finally,we highlight the potential of shape/property/functionality-shifting smart 4D bio-piezoelectric scaffolds in bone tissue engineering(BTE).Taken together,this review emphasizes the appealing utility of 3D/4D printed biological piezoelectric scaffolds as next-generation BTE implants.
基金Supported by National Natural Science Foundation of China(Grant No.52075145)S&T Program of Hebei Province of China(Grant No.20281805Z)+1 种基金Hebei Provincial Natural Science Foundation of China(Grant No.E2022202130)Central Government Guides Basic Research Projects of Local Science and Technology Development Funds of China(Grant No.206Z1801G).
文摘Aiming at the problem that the existing ankle rehabilitation robot is difficult to fully fit the complex motion of human ankle joint and has poor human-machine motion compatibility,an equivalent series mechanism model that is highly matched with the actual bone structure of the human ankle joint is proposed and mapped into a parallel rehabilita-tion mechanism.The parallel rehabilitation mechanism has two virtual motion centers(VMCs),which can simulate the complex motion of the ankle joint,adapt to the individual differences of various patients,and can meet the reha-bilitation needs of both left and right feet of patients.Firstly,based on the motion properties and physiological structure of the human ankle joint,the mapping relationship between the rehabilitation mechanism and ankle joint is determined,and the series equivalent model of the ankle joint is established.According to the kinematic and con-straint properties of the ankle equivalent model,the configuration design of the parallel ankle rehabilitation robot is carried out.Secondly,according to the intersecting motion planes theory,the full-cycle mobility of the mechanism is proved,and the continuous axis of the mechanism is judged based on the constraint power and its derivative.Then,the kinematics of the parallel ankle rehabilitation robot is analyzed.Finally,based on the OpenSim biomechanical soft-ware,a human-machine coupling rehabilitation simulation model is established to evaluate the rehabilitation effect,which lays the foundation for the formulation of a rehabilitation strategy for the later prototype.
基金funded by The Henan Province Young and Middle-aged Health Science and Technology Innovation Young Talent Training Project(,Grant/Award Number:YXKC20200041)National Health Commission Capacity Building and Continuing Education Project(Grant/Award Number:GWJJ2023100101)
文摘Background:Previous single-center studies have demonstrated that drug-coated balloons(DCBs)may reduce restenosis rates,which is an important factor affecting the prognosis for intracranial interventional therapy.However,currently available cardiac DCBs are not always suitable for the treatment of intracranial atherosclerotic stenosis(ICAS).This study aimed to evaluate the safety and efficacy of a novel DCB catheter designed for patients with severely symptomatic ICAS.Methods:This prospective,multicenter,single-arm,target-value clinical trial was conducted in 9 Chinese stroke centers to evaluate the safety and efficacy of a novel DCB catheter for treating symptomatic severe ICAS.Primary metrics and other indicators were collected and analyzed using SAS version 9.4(SAS Institute,Cary,NC,USA).Results:A total of 155 patients were enrolled in this study.The preliminary collection of follow-up data has been completed,while data quality control is ongoing.Conclusion:Results of this study demonstrated the patency rate,safety,and effectiveness of a novel on-label paclitaxel DCB designed for the treatment of ICAS.Ethics and dissemination:This study,involving human participants,was reviewed and approved by the Ethics Committee of Drugs(Devices)Clinical Experiment at Henan Provincial People’s Hospital(reference number:2020-145-03)and other research centers participating in the clinical trial.The results of this study will be presented at international conferences and sent to peer-reviewed journals for publication.Standard protocol items:The Recommendations for Interventional Trials checklist was used when drafting the study protocol.Trial registration number:Registered with the Chinese Clinical Trial Registry on June 11,2021(Chi CTR2100047223).
基金This work is supported by the Henan Provincial Science and Technology Research Project(222102220068).
文摘Torquigener albomaculosus,also known as the white-spotted pufferfish,is known for creating circular nests in the underwater sand as part of the mating ritual.The nests are built by the males to attract females through the nest’s impressive design and related ability to gather fine sand particles.As the fluid-dynamic processes associated with these unique nests are still almost completely unknown,in the present study,an analysis has been conducted to investigate how the geometric parameters related to the nest design influence the fluid velocity in its center.For this reason,a geometric model of the nest consisting of 24 channels,where each unit channel can be described by three strips of broken lines,has been introduced,and a multivariate analysis has been implemented to determine the relative weight of each considered parameter.In particular,the“optimal”combination of parameters has been obtained by means of an orthogonal design approach.We show that these bio-nest structures also display a potential for significant application in marine litter collection,or for use as a buffer against the waves in offshore areas.
基金This project was supported by the National Natural Science Foundation of China(U19A2017,22272206,51976143)Natural Science Foundation of Hunan Province(S2021JJMSXM3153).
文摘Electrochemical carbon dioxide reduction reaction(CO_(2)RR)provides an attractive approach to carbon capture and utilization for the production high-value-added products.However,CO_(2)RR still suffers from poor selectivity and low current density due to its sluggish kinetics and multitudinous reaction pathways.Single-atom catalysts(SACs)demonstrate outstanding activity,excellent selectivity,and remarkable atom utilization efficiency,which give impetus to the search for electrocatalytic processes aiming at high selectivity.There appears significant activity in the development of efficient SACs for CO_(2)RR,while the density of the atomic sites remains a considerable barrier to be overcome.To construct high-metal-loading SACs,aggregation must be prevented,and thus novel strategies are required.The key to creating high-density atomically dispersed sites is designing enough anchoring sites,normally defects,to stabilize the highly mobile separated metal atoms.In this review,we summarized the advances in developing high-loading SACs through defect engineering,with a focus on the synthesis strategies to achieve high atomic site loading.Finally,the future opportunities and challenges for CO_(2)RR in the area of high-loading single-atom electrocatalysts are also discussed.
基金This research was jointly supported by the National Key R&D Program of China(2021YFC2800801)the Key Special Project for Introduced Talents Team of Southern Marine Science and Engineering Guangdong Laboratory(Guangzhou)(GML2019ZD0501)+3 种基金the Guangzhou Basic and Applied Basic Foundation(202102020611)the project of Guangzhou Marine Geological Survey of the China Geology Survey(DD20221700)the Key-Area Research and Development Program of Guangdong Province(2020B1111030003)the High-tech Ship Research Project of the Ministry of Industry and Information Technology(CJ05N20).
文摘Conductor and suction anchor are the key equipment providing bearing capacity in the field of deep-water drilling or offshore engineering,which have the advantages of high operation efficiency and short construction period.In order to drill a horizontal well in the shallow hydrate reservoir in the deep water,the suction anchor wellhead assembly is employed to undertake the main vertical bearing capacity in the second round of hydrate trial production project,so as to reduce the conductor running depth and heighten the kick-off point position.However,the deformation law of the deep-water suction anchor wellhead assembly under the moving load of the riser is not clear,and it is necessary to understand the lateral bearing characteristics to guide the design of its structural scheme.Based on 3D solid finite element method,the solid finite element model of the suction anchor wellhead assembly is established.In the model,the seabed soil is divided into seven layers,the contact between the wellhead assembly and the soil is simulated,and the vertical load and bending moment are applied to the wellhead node to simulate the riser movement when working in the deep water.The lateral bearing stability of conventional wellhead assembly and suction anchor wellhead assembly under the influence of wellhead load is discussed.The analysis results show that the bending moment is the main factor affecting the lateral deformation of the wellhead string;the anti-bending performance from increasing the outer conductor diameter is better than that from increasing the conductor wall thickness;for the subsea wellhead,the suction anchor obviously improves the lateral bearing capacity and reduces the lateral deformation.The conduct of the suction anchor wellhead assembly still needs to be lowered to a certain depth that below the maximum disturbed depth to ensure the lateral bearing stability,Thus,a method for the minimum conductor running depth for the suction anchor wellhead assembly is developed.The field implementations show that compared with the first round of hydrate trial production project,the conductor running depth is increased by 9.42 m,and there is no risk of wellhead overturning during the trial production.The method for determining the minimum conductor running depth in this paper is feasible and will still play an important role in the subsequent hydrate exploration and development.
基金financially supported by the National Natural Science Foundation of China(No.21973028,52004334)the outstanding youth science fund of Henan Normal University(No.2021JQ02),Natural Science Foundation of Hunan Province(2021JJ20073)+2 种基金National Key Research and Development Program of China(2018YFC1901601 and 2019YFC1907801)Scientific Research Fund of Hunan Provincial Education Department,grant number(20C0085)Collaborative Innovation Center for Clean and Efficient Utilization of Strategic Metal Mineral Resources,Foundation of State Key Laboratory of Mineral Processing(BGRIMM-KJSKL-2017-13)。
文摘Attracted by high energy density and considerable conductivity of selenium(Se),Na-Se batteries have been deemed promising energy-storage systems.But,it still suffers from sluggish kinetic behaviors and similar“shuttling effect”to S-electrodes.Herein,utilizing uniform hollow carbon spheres as precursors,Se-material is effectively loaded through vapor-infiltration method.Owing to the distribution of optimized pores,the content of microspores could be up to~60%(<2 nm),serving important roles for the physical confinement effect.Meanwhile,the rich oxygen-containing groups and N-elements could be noted,inducing the evolution of electron-moving behaviors.More significantly,assisted by the interfacial C-Se bonds and tiny Se distributions,Se electrodes are activated during cycling.Used as cathodes for Na-Se systems,the as-resulted samples display a capacity of 593.9 mA h g^(-1)after 100 cycles at the current density of 0.1 C.Even after 6000 cycles,the capacity could be still kept at about 225 mA h g^(-1)at 5.0 C.Supported by the detailed kinetic analysis,the designed microspores size induces the increasing redox reaction of nano Se,whilst the surface traits further render the enhancement of pseudo-capacitive contributions.Moreover,after cycling,the product Sex(x<4)in pores serves as the primary active material.Given this,the work is anticipated to provide an effective strategy for advanced electrodes for Na-Se systems.
基金support from the National Natural Science Foundation of China(Grants No.82304827,82074098,81841001)the Fundamental Research Funds for the Central public welfare research institutes(ZZ13-ZD-07),the National Key Research and Development Programof China(2020YFA0908000,2022YFC2303600)+7 种基金the Innovation Team and Talents Cultivation Program of National Administration of Traditional Chinese Medicine(No:ZYYCXTD-C-202002)The Shenzhen Medical Research Fund of Shenzhen Medical Academy of Research and Translation(B2302051)the Fundamental Research Funds for the Central Public Welfare Research Institutes(Grants No.ZZ13-YQ-108)the Shenzhen Science and Technology Innovation Commission(Grants No.JCYJ20210324115800001)the Science and Technology Foundation of Shenzhen(Shenzhen Clinical Medical Research Center for Geriatric Diseases),the Distinguished Expert Project of Sichuan Province Tianfu Scholar(CW202002)Supported by Shenzhen Governmental Sustainable Development Fund(KCXFZ20201221173612034)Supported by Shenzhen key Laboratory of Kidney Diseases(ZDSYS201504301616234)Supported by Shenzhen Fund for Guangdong Provincial High-level Clinical Key Specialties(NO.SZGSP001).
文摘Hepatocellular carcinoma(HCC)is one of most common and deadliest malignancies.Celastrol(Cel),a natural product derived from the Tripterygium wilfordii plant,has been extensively researched for its potential effectiveness in fighting cancer.However,its clinical application has been hindered by the unclear mechanism of action.Here,we used chemical proteomics to identify the direct targets of Cel and enhanced its targetability and antitumor capacity by developing a Cel-based liposomes in HCC.We demonstrated that Cel selectively targets the voltage-dependent anion channel 2(VDAC2).Cel directly binds to the cysteine residues of VDAC2,and induces cytochrome C release via dysregulating VDAC2-mediated mitochondrial permeability transition pore(mPTP)function.We further found that Cel induces ROS-mediated ferroptosis and apoptosis in HCC cells.Moreover,coencapsulation of Cel into alkyl glucoside-modified liposomes(AGCL)improved its antitumor efficacy and minimized its side effects.AGCL has been shown to effectively suppress the proliferation of tumor cells.In a xenograft nude mice experiment,AGCL significantly inhibited tumor growth and promoted apoptosis.Our findings reveal that Cel directly targets VDAC2 to induce mitochondria-dependent cell death,while the Cel liposomes enhance its targetability and reduces side effects.Overall,Cel shows promise as a therapeutic agent for HCC.