Low air permeability is a common problem happening to the coating finished and pigment dyed fabrics.To tackle the problem,styrene and butyl acrylate copolymer latex was prepared and used as substitute for the binder.T...Low air permeability is a common problem happening to the coating finished and pigment dyed fabrics.To tackle the problem,styrene and butyl acrylate copolymer latex was prepared and used as substitute for the binder.Then,polyvinylpyrrolidone(PVP)was fed into the latex.It was expected that pores could form in the resulting latex film after being rinsed.The morphologies of the latex films were analysized by scanning electric microscope(SEM).It was found that the continuity of the latex films decreased greatly because of the addition of PVP,leading to the loss of the stress at break of the films.After rinsing with methanol aqueous solution,PVP was easily leached off and(macro)void was formed in the latex films.The size of the void decreased with the increase of the PVP concentration.Then,the latex with and without PVP was used to finish the cotton fabrics and engaged as binder in pigment dyeing.After PVP was rinsed out,the air permeability of the fabrics improved greatly,which recovered to that of the unfinished one.In the meantime,the color fastness to rubbing was little affected.So,the method of PVP addition could be termed as an efficient way to improve the air permeability in coating and dyeing industry.展开更多
Three different low-temperature plasma-based methods were used to improve the surface hydrophilicity of polyethy- lene (PE) films, and all the modification processes were carried out by employing an atmospheric pres...Three different low-temperature plasma-based methods were used to improve the surface hydrophilicity of polyethy- lene (PE) films, and all the modification processes were carried out by employing an atmospheric pressure plasma jet (APPJ) system. (a) PE films were directly modified by APPJ using a gas mixture of He and 02. (b) Acrylic acid (AA) was introduced into the system and a polymer acrylic acid (PAA) coating was deposited onto the PE films. (c) AA was grafted onto the PE surface activated by plasma pre-treatment. It was found that the hydrophilicity of the PE films was significantly improved for all the three methods. However, the samples modified by Process (a) showed hydrophobicity recovery after a storage time of 20 days while no significant change was found in samples modified by Process (b) and Process (c). The Fourier transform infrared spectroscopy (FTIR) results indicated that the most intensive C=O peak was detected on the PE surface modified by Process (c). According to the X-ray photoelectron spectroscopy (XPS) analysis, the ratios of oxygen-containing polar groups for samples modified by Process (b) and Process (c) were higher than that modified by Process (a).展开更多
In this paper,the collective effects of combining heterogeneous Ag/TiO2 nanocomposite catalyst with the byproducts(primarily the irradiation and the O3 species) of an atmospheric pressure plasma jet(APPJ) system o...In this paper,the collective effects of combining heterogeneous Ag/TiO2 nanocomposite catalyst with the byproducts(primarily the irradiation and the O3 species) of an atmospheric pressure plasma jet(APPJ) system on the degradation of methyl orange(MO) were explored.The heterostructured Ag/TiO2 nanocomposite was achieved via decorating the Ag quantum dots(QDs) on the commercially available TiO_2catalyst(P25) through a hydrothermal method.The x-ray diffraction analysis of the nanocomposite catalyst showed the diffraction peaks at 44.3°,64.4°,and 77.5°,corresponding to the Ag planes of(200),(220) and(311),respectively.The high resolution transmission electron microscope characterization of the nanocomposite catalyst indicated that the Ag QDs with an average diameter of 5 nm were homogeneously distributed on the P25 surface.The experimental results on the MO photodegradation showed that the APPJ irradiation had a marginal effect on the cleavage of the MO molecules.When the Ag/TiO2 nanocomposite catalyst was used,the photodegradation rate of MO increased about 5 times.When both the APPJ byproducts and the Ag/TiO2 nanocomposite catalyst were used,however,over 90% of the MO in the tested solution was cleaved within 15 min,and the energy efficiency was about 0.6 g/k W h.Moreover,an optimal Ag dosage value was determined(6 wt%).The catalytic results indicated that combining the DBD plasma byproducts with heterogeneous nanocomposite catalysts may be an effect protocol for decreasing the application cost of the DBD system and mitigating the environment pollution by organic dyes in the textile industry.展开更多
The sterilization of the simulated unearthed silk fabrics using an atmospheric pressure plasma jet(APPJ) system employing Ar/O2 or He/O2 plasma to inactivate the mycete attached on the silk fabrics is reported. The ...The sterilization of the simulated unearthed silk fabrics using an atmospheric pressure plasma jet(APPJ) system employing Ar/O2 or He/O2 plasma to inactivate the mycete attached on the silk fabrics is reported. The effects of the APPJ characteristics(particularly the gas type and discharge power) on the fabric strength, physical-chemical structures,and sterilizing efficiency were investigated. Experimental results showed that the Ar/O2 APPJ plasma can inactivate the mycete completely within 4.0 min under a discharge power of 50.0 W. Such an APPJ treatment had negligible impact on the mechanical strength of the fabric and the surface chemical characteristics. Moreover, the Ar ions, O and OH radicals were shown to play important roles on the sterilization of the mycete attached on the unearthed silk fabrics.展开更多
The dyeing behavior of cationic dyes to acrylic fiber with self-made low temperature dyeing accelerant was investigated in this study.Compared with conventional dyeing,the acrylic yarn was dyed with Cationic Turquoise...The dyeing behavior of cationic dyes to acrylic fiber with self-made low temperature dyeing accelerant was investigated in this study.Compared with conventional dyeing,the acrylic yarn was dyed with Cationic Turquoise Blue X-GB at 85℃ in the presence of accelerant and absence of accelerant,respectively.The influence of low temperature dyeing accelerant on the dyeing mechanism of acrylic fiber dyed with cationic dye was analyzed through kinetics and thermodynamics study.The results show that adding dyeing accelerant can heighten the equilibrium dye-uptake,dyeing rate constants,diffusion coefficients,and shorten half-dyeing time for acrylic fiber dyed with cationic dyes.Furthermore,the partition coefficient,the standard affinity,and the dye saturation value also increased in the dyeing at 85℃.展开更多
Aiming at improving the permeability of the pigment dyed fabrics,two kinds of hydrophilic polymers(polyvinyl pyrrolidone(PVP),and polyethylene glycol(PEG)were fed into the styrene-butyl acrylate(St-BuA)copolymer latex...Aiming at improving the permeability of the pigment dyed fabrics,two kinds of hydrophilic polymers(polyvinyl pyrrolidone(PVP),and polyethylene glycol(PEG)were fed into the styrene-butyl acrylate(St-BuA)copolymer latex binder respectively to prepare films with macropores.The effects of the post-added polymers on the latex film formation process and film structures were studied and the performance of the dyed fabrics was evaluated.It was found that the drying process could still be divided into three stages even after the addition of PVP and PEG.And the water evaporation rate during the first and last stage remained the same as usual.However,after the addition of PVP,the onset of the second stage was delayed to high volume fraction,and PVP formed into spherical dispersion phase with 300 nm in diameter.It provided a great deal of interface between the latex polymer and the PVP phase,which led to an increase in the water evaporation rate during the second stage.A different case was found after the feeding of PEG.Firstly,the first stage ended at low volume fraction and a decreased evaporation rate was observed in the second stage.Secondly,the PEG dispersion appeared as finger-like structure in the transmission electron microscopy(TEM)images with 9μm in length.After rinsing,pores were found only in the films formerly containing PVP or PEG,and the shapes and the sizes were closely correlated with the initial morphologies of the PVP or PEG domains.However,the shade of color,the abrasion fastness,and the permeability of the dyed fabric were independent of the type of the post-added hydrophilic polymer.展开更多
A new coordination compound, [(CuI)(Btd)]n (1, Btd = 2,1,3-benzothiadiazole), was obtained at room temperature by the reaction of 2,1,3-benzothiadiazole with CuI and KI saturated aqueous solution. It was charact...A new coordination compound, [(CuI)(Btd)]n (1, Btd = 2,1,3-benzothiadiazole), was obtained at room temperature by the reaction of 2,1,3-benzothiadiazole with CuI and KI saturated aqueous solution. It was characterized by elemental analysis, IR spectroscopy, single-crystal X-ray diffraction analysis and photoluminescence. The complex crystallizes in the triclinic Pi space group, with a = 4.1620(6), b = 10.4590(15), c = 10.5052(15) A, a = 69.310(2), β = 83.608(2), γ = 78.873(2)°, V = 419.30(10) A3, Z = 2, C6H4N2SCuI, Mr = 326.61, Dc = 2.587 g/cm^3, F(000) = 304 and/^(MoKa) = 6.464 mm-1. The final R = 0.0418 and wR = 0.0936 for 1451 observed reflections with 1 〉 2σ(I) and R = 0.0422 and wR = 0.0939 for all data. In the complex, the Cu atoms are coordinated by one nitrogen atom and three iodine atoms to form a double-stranded stair, and such stairs are further linked to build a 2D framework via C-H…I interactions.展开更多
Under the guidance of the finding that the tyrosine residues in proteins could undergo three-component Mannich-type reactions with formaldehyde and electron-rich aniline-containing compounds,which forms covalent bondi...Under the guidance of the finding that the tyrosine residues in proteins could undergo three-component Mannich-type reactions with formaldehyde and electron-rich aniline-containing compounds,which forms covalent bonding connections between the protein of interest and the aniline with high levels of selectivity under relatively mild conditions,an orange aromatic primary amine-containing acid dye AMODB was designed and readily synthesized.The molecular structure was characterized by FTIR,^1H NMR,mass spectrometry and elemental analysis.The synthesized dye and a similar control dye(C.I.Acid Yellow 11) without primary amine groups were applied to dye silk fabric by three dyeing processes:Mannich-type dyeing(with and without the addition of formaldehyde) and acidic dyeing.Their washing and rubbing fastness properties with different dyeing methods were examined and compared.It was found that the dyed silk fabric with AMODB by the Mannich-type dyeing showed higher color depth,better anti-stripping ability to DMF and better washing fastness than those of the dyed silk fabric with C.I.Acid Yellow 11 by acidic dyeing due to the covalent bond formation between the dye chromophore of AMODB and silk fiber.In addition,mild Mannich dyeing conditions suitable for silk(AMODB at 3%owf,75:1 liquor-to-goods ratio,dyebath pH 5.5,30℃,10 h) were provided.展开更多
A yellow, alkali-clearable azo disperse dye containing a carboxylic ester moiety was readily synthesized from the reactant p-aminobenzoic acid by successive diazotization, coupling reaction, chlorination and esterific...A yellow, alkali-clearable azo disperse dye containing a carboxylic ester moiety was readily synthesized from the reactant p-aminobenzoic acid by successive diazotization, coupling reaction, chlorination and esterification with ethanol. Then its molecular structure was characterized by FTIR,1H NMR,13 C NMR,mass spectrometry and elemental analysis. The synthesized dye and a similar control dye containing the acylamide moiety(I) were applied to dyeing poly(ethylene terephthalate) fabric and their washing and rubbing fastness properties with different post-treatment methods(reduction clearing and alkali clearing) were examined and compared. It is found that the ester-containing disperse dye shows good alkali-clear ability on poly(ethylene terephthalate) fabric and contaminates little to environment due to the absence of reductants, as well as low toxicity and easy recycling of the hydrolysates.展开更多
基金Science Foundation of Zhejiang Province of China(No.Y4080375)Program for Changjiang Scholars and Innovative Research Teamin University,China(No.IRT0654)Programfor New Talents of Zhejiang Province of China(No.2008R40G2060060)
文摘Low air permeability is a common problem happening to the coating finished and pigment dyed fabrics.To tackle the problem,styrene and butyl acrylate copolymer latex was prepared and used as substitute for the binder.Then,polyvinylpyrrolidone(PVP)was fed into the latex.It was expected that pores could form in the resulting latex film after being rinsed.The morphologies of the latex films were analysized by scanning electric microscope(SEM).It was found that the continuity of the latex films decreased greatly because of the addition of PVP,leading to the loss of the stress at break of the films.After rinsing with methanol aqueous solution,PVP was easily leached off and(macro)void was formed in the latex films.The size of the void decreased with the increase of the PVP concentration.Then,the latex with and without PVP was used to finish the cotton fabrics and engaged as binder in pigment dyeing.After PVP was rinsed out,the air permeability of the fabrics improved greatly,which recovered to that of the unfinished one.In the meantime,the color fastness to rubbing was little affected.So,the method of PVP addition could be termed as an efficient way to improve the air permeability in coating and dyeing industry.
基金Project supported by the National Natural Science Foundation of China(Grant No.11175157)the Zhejiang Provincial Key Innovation Team,China(Grant No.2012R10038)the 521 Talent Project of Zhejiang Sci-Tech University,China
文摘Three different low-temperature plasma-based methods were used to improve the surface hydrophilicity of polyethy- lene (PE) films, and all the modification processes were carried out by employing an atmospheric pressure plasma jet (APPJ) system. (a) PE films were directly modified by APPJ using a gas mixture of He and 02. (b) Acrylic acid (AA) was introduced into the system and a polymer acrylic acid (PAA) coating was deposited onto the PE films. (c) AA was grafted onto the PE surface activated by plasma pre-treatment. It was found that the hydrophilicity of the PE films was significantly improved for all the three methods. However, the samples modified by Process (a) showed hydrophobicity recovery after a storage time of 20 days while no significant change was found in samples modified by Process (b) and Process (c). The Fourier transform infrared spectroscopy (FTIR) results indicated that the most intensive C=O peak was detected on the PE surface modified by Process (c). According to the X-ray photoelectron spectroscopy (XPS) analysis, the ratios of oxygen-containing polar groups for samples modified by Process (b) and Process (c) were higher than that modified by Process (a).
基金the support from National Natural Science Foundation of China under Grant No.11175157the Zhejiang Natural Science Foundations of China under No.LY16A050002+1 种基金521 Talent Project of Zhejiang Sci-Tech Universitythe Young Researchers Foundations of Zhejiang Provincial Top Key Academic Discipline of Chemical Engineering and Technology
文摘In this paper,the collective effects of combining heterogeneous Ag/TiO2 nanocomposite catalyst with the byproducts(primarily the irradiation and the O3 species) of an atmospheric pressure plasma jet(APPJ) system on the degradation of methyl orange(MO) were explored.The heterostructured Ag/TiO2 nanocomposite was achieved via decorating the Ag quantum dots(QDs) on the commercially available TiO_2catalyst(P25) through a hydrothermal method.The x-ray diffraction analysis of the nanocomposite catalyst showed the diffraction peaks at 44.3°,64.4°,and 77.5°,corresponding to the Ag planes of(200),(220) and(311),respectively.The high resolution transmission electron microscope characterization of the nanocomposite catalyst indicated that the Ag QDs with an average diameter of 5 nm were homogeneously distributed on the P25 surface.The experimental results on the MO photodegradation showed that the APPJ irradiation had a marginal effect on the cleavage of the MO molecules.When the Ag/TiO2 nanocomposite catalyst was used,the photodegradation rate of MO increased about 5 times.When both the APPJ byproducts and the Ag/TiO2 nanocomposite catalyst were used,however,over 90% of the MO in the tested solution was cleaved within 15 min,and the energy efficiency was about 0.6 g/k W h.Moreover,an optimal Ag dosage value was determined(6 wt%).The catalytic results indicated that combining the DBD plasma byproducts with heterogeneous nanocomposite catalysts may be an effect protocol for decreasing the application cost of the DBD system and mitigating the environment pollution by organic dyes in the textile industry.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11665005,11505032,11547139,51672249,and 11565003)the Zhejiang Natural Science Foundation of China(Grant No.LY16A050002)+3 种基金the Natural Science Foundation of Jiangxi Province,China(Grant Nos.20161BAB211026,20171ACB21049,and 20171BAB211012)the Science and Technology Project of Jiangxi Provincial Department of Education,China(Grant No.GJJ150981)the Program for Innovative Research Team of Zhejiang Sci-Tech University,Chinathe Opening Foundation of Insititue of Textile Technology,Wuhan Texitle Universitiy,China(Grant No.GCZX201702)
文摘The sterilization of the simulated unearthed silk fabrics using an atmospheric pressure plasma jet(APPJ) system employing Ar/O2 or He/O2 plasma to inactivate the mycete attached on the silk fabrics is reported. The effects of the APPJ characteristics(particularly the gas type and discharge power) on the fabric strength, physical-chemical structures,and sterilizing efficiency were investigated. Experimental results showed that the Ar/O2 APPJ plasma can inactivate the mycete completely within 4.0 min under a discharge power of 50.0 W. Such an APPJ treatment had negligible impact on the mechanical strength of the fabric and the surface chemical characteristics. Moreover, the Ar ions, O and OH radicals were shown to play important roles on the sterilization of the mycete attached on the unearthed silk fabrics.
基金Science and Technology Department of Zhejiang Province,China (No. 2008C01069-4)
文摘The dyeing behavior of cationic dyes to acrylic fiber with self-made low temperature dyeing accelerant was investigated in this study.Compared with conventional dyeing,the acrylic yarn was dyed with Cationic Turquoise Blue X-GB at 85℃ in the presence of accelerant and absence of accelerant,respectively.The influence of low temperature dyeing accelerant on the dyeing mechanism of acrylic fiber dyed with cationic dye was analyzed through kinetics and thermodynamics study.The results show that adding dyeing accelerant can heighten the equilibrium dye-uptake,dyeing rate constants,diffusion coefficients,and shorten half-dyeing time for acrylic fiber dyed with cationic dyes.Furthermore,the partition coefficient,the standard affinity,and the dye saturation value also increased in the dyeing at 85℃.
基金Science Foundation of Zhejiang Province,China(No.Y4080375)Program for Changjiang Scholars and Innovative Research Teamin University,China(No.IRT0654)
文摘Aiming at improving the permeability of the pigment dyed fabrics,two kinds of hydrophilic polymers(polyvinyl pyrrolidone(PVP),and polyethylene glycol(PEG)were fed into the styrene-butyl acrylate(St-BuA)copolymer latex binder respectively to prepare films with macropores.The effects of the post-added polymers on the latex film formation process and film structures were studied and the performance of the dyed fabrics was evaluated.It was found that the drying process could still be divided into three stages even after the addition of PVP and PEG.And the water evaporation rate during the first and last stage remained the same as usual.However,after the addition of PVP,the onset of the second stage was delayed to high volume fraction,and PVP formed into spherical dispersion phase with 300 nm in diameter.It provided a great deal of interface between the latex polymer and the PVP phase,which led to an increase in the water evaporation rate during the second stage.A different case was found after the feeding of PEG.Firstly,the first stage ended at low volume fraction and a decreased evaporation rate was observed in the second stage.Secondly,the PEG dispersion appeared as finger-like structure in the transmission electron microscopy(TEM)images with 9μm in length.After rinsing,pores were found only in the films formerly containing PVP or PEG,and the shapes and the sizes were closely correlated with the initial morphologies of the PVP or PEG domains.However,the shade of color,the abrasion fastness,and the permeability of the dyed fabric were independent of the type of the post-added hydrophilic polymer.
基金Supported by the National Natural Science Foundation of China (61205184)the Department of Education of Zhejiang Province (Y201122207)+1 种基金Open Foundation of Zhejiang Provincial Top Key Academic Discipline of Applied Chemistry and Eco-Dyeing & Finishing Engineering (YR2012013)the Young Researchers Foundation of Zhejiang Provincial Top Key Academic Discipline of Applied Chemistry and Eco-Dyeing & Finishing Engineering (ZYG2012003)
文摘A new coordination compound, [(CuI)(Btd)]n (1, Btd = 2,1,3-benzothiadiazole), was obtained at room temperature by the reaction of 2,1,3-benzothiadiazole with CuI and KI saturated aqueous solution. It was characterized by elemental analysis, IR spectroscopy, single-crystal X-ray diffraction analysis and photoluminescence. The complex crystallizes in the triclinic Pi space group, with a = 4.1620(6), b = 10.4590(15), c = 10.5052(15) A, a = 69.310(2), β = 83.608(2), γ = 78.873(2)°, V = 419.30(10) A3, Z = 2, C6H4N2SCuI, Mr = 326.61, Dc = 2.587 g/cm^3, F(000) = 304 and/^(MoKa) = 6.464 mm-1. The final R = 0.0418 and wR = 0.0936 for 1451 observed reflections with 1 〉 2σ(I) and R = 0.0422 and wR = 0.0939 for all data. In the complex, the Cu atoms are coordinated by one nitrogen atom and three iodine atoms to form a double-stranded stair, and such stairs are further linked to build a 2D framework via C-H…I interactions.
基金supported by National Natural Science Foundation of China(No.20606029)Natural Science Foundation of Zhejiang Province(No.Y4090579)Science Foundation of Zhejiang Sci-Tech University (ZSTU)(No.0701652-Y)
基金supported by the National Natural Science Foundation of China(Nos.21106135 and 51173168)Zhejiang Provincial Key Innovation Team(No.2010R50038)+1 种基金Zhejiang Provincial Top Key Academic Discipline of Chemical Engineering and Technology"521" Talent Project of Zhejiang Sci-Tech University
文摘Under the guidance of the finding that the tyrosine residues in proteins could undergo three-component Mannich-type reactions with formaldehyde and electron-rich aniline-containing compounds,which forms covalent bonding connections between the protein of interest and the aniline with high levels of selectivity under relatively mild conditions,an orange aromatic primary amine-containing acid dye AMODB was designed and readily synthesized.The molecular structure was characterized by FTIR,^1H NMR,mass spectrometry and elemental analysis.The synthesized dye and a similar control dye(C.I.Acid Yellow 11) without primary amine groups were applied to dye silk fabric by three dyeing processes:Mannich-type dyeing(with and without the addition of formaldehyde) and acidic dyeing.Their washing and rubbing fastness properties with different dyeing methods were examined and compared.It was found that the dyed silk fabric with AMODB by the Mannich-type dyeing showed higher color depth,better anti-stripping ability to DMF and better washing fastness than those of the dyed silk fabric with C.I.Acid Yellow 11 by acidic dyeing due to the covalent bond formation between the dye chromophore of AMODB and silk fiber.In addition,mild Mannich dyeing conditions suitable for silk(AMODB at 3%owf,75:1 liquor-to-goods ratio,dyebath pH 5.5,30℃,10 h) were provided.
基金supported by the National Natural Science Foundation of China(Nos.51173168,21106135)Zhejiang Provincial Key Innovation Team(No.2010R50038)+1 种基金Zhejiang Provincial Top Key Academic Discipline of Chemical Engineering and Technology of Zhejiang Sci-Tech University‘‘521’’ Talent Project of Zhejiang Sci-Tech University
文摘A yellow, alkali-clearable azo disperse dye containing a carboxylic ester moiety was readily synthesized from the reactant p-aminobenzoic acid by successive diazotization, coupling reaction, chlorination and esterification with ethanol. Then its molecular structure was characterized by FTIR,1H NMR,13 C NMR,mass spectrometry and elemental analysis. The synthesized dye and a similar control dye containing the acylamide moiety(I) were applied to dyeing poly(ethylene terephthalate) fabric and their washing and rubbing fastness properties with different post-treatment methods(reduction clearing and alkali clearing) were examined and compared. It is found that the ester-containing disperse dye shows good alkali-clear ability on poly(ethylene terephthalate) fabric and contaminates little to environment due to the absence of reductants, as well as low toxicity and easy recycling of the hydrolysates.