Synthesis and electrochemical properties of environmental free Lglutathione grafted graphene oxide/ZnO nanocomposite for highly selective piroxicam sensing

A simple and reliable strategy was proposed to engineer the glutathione grafted graphene oxide/ZnO nanocomposite(glutathione-GO/ZnO)as electrode material for the high-performance piroxicam sensor.The prepared glutathione-GO/ZnO nanocomposite was well characterized by X-ray diffraction(XRD),Fourier transform infrared spectrum(FTIR),X-ray photoelectron spectroscopy(XPS),field emission scanning electron microscopy(FE-SEM),cyclic voltammetry(CV),electrochemical impedance spectroscopy(EIS)and differential pulse voltammetry(DPV).The novel nanocomposite modified electrode showed the highest electrocatalytic activity towards piroxicam(oxidation potential is 0.52 V).Under controlled experimental parameters,the proposed sensor exhibited good linear responses to piroxicam concentrations ranging from 0.1 to 500 μM.The detection limit and sensitivity were calculated as 1.8 μM and 0.2 μA/μM·cm^(2),respectively.Moreover,it offered excellent selectivity,reproducibility,and long-term stability and can effectively ignore the interfering candidates commonly existing in the pharmaceutical tablets and human fluids even at a higher concentration.Finally,the reported sensor was successfully employed to the direct determination of piroxicam in practical samples.

Environmental Impact Assessment of Sacrificial Anode Method in Taiwan Strait

Taiwan Strait is one of the potential wind farm in the world. Cooperate with the development of national policies, thousands of offshore wind turbines will be installed in Taiwan Strait. In order to enable offshore wind turbine foundation to be erected in the ocean for a long time, the offshore structure facilities are protected by sacrificial anode or impressed current of today. This study utilized the MIKE21 numerical model, combined with ocean parameters such as sea waves and tidal current to simulate the change of the diffusion concentration and diffusion range of the materials released by the aluminum sacrificial anode blocks by the Changhua offshore wind farm located on Taiwan Strait in winter and summer, thus to evaluate the impact on the marine environment.

Automated Lamp Detection System Developed by LabVIEW

The automated detection and lighting control system is proposed in this paper.It is used to reduce the investment of human resources and reduce the incidence of misjudgment or disoperation caused by human fatigue,which will greatly help the investment cost and efficiency.This paper used NI LabVIEW’s program control interface with microcontroller(MCU)and oscilloscope kit(GentryUSB)to develop an oscilloscope and logical analysis functions with automatic detection of LED lamps.The proposed system has data detection,logic analysis,waveform photo capture,lamp control,RS232 packet transmission.Its characteristic is to complete the complicated control/detection process through automation by one click to reduce the error rate and labor cost.In addition,the software and firmware are designed independently,which has extremely high function expansion flexibility and can also accept customized functions and interface custom design.It is expected to bring a lot of benefits and convenience to the laboratory or factory in the future.

Implementation of natural hand gestures in holograms for 3D object manipulation

Holograms provide a characteristic manner to display and convey information, and have been improved to provide better user interactions Holographic interactions are important as they improve user interactions with virtual objects. Gesture interaction is a recent research topic, as it allows users to use their bare hands to directly interact with the hologram. However, it remains unclear whether real hand gestures are well suited for hologram applications. Therefore, we discuss the development process and implementation of three-dimensional object manipulation using natural hand gestures in a hologram. We describe the design and development process for hologram applications and its integration with real hand gesture interactions as initial findings. Experimental results from Nasa TLX form are discussed. Based on the findings, we actualize the user interactions in the hologram.

Design of Digital Linear Power Supply with Low Current Ripple

A linear power supply is a circuit architecture directly driven by AC. Multiple high-voltage LEDs (light-emitting diodes) are connected in series to withstand the input voltage. The LEDs are divided into multiple segments through a segment switching mechanism to adapt to the pulsating DC changes after bridge rectification. Due to imperfect switching between control signals, there may be signal overlap or misalignment, which reduces circuit performance and component lifespan. Firstly, signal overlap occurs when the next segment opens before the previous segment is about to close. This state causes overlapping intervals where two segments of current combine, resulting in a high combined current that can lead to significant power losses and generate heat, potentially reducing the lifespan of the components. Secondly, signal misalignment occurs when the next segment prepares to open after the previous segment has completely closed. In this state, there is a time gap with no current flow, resulting in reduced output power and exacerbating LED flickering. Both of these undesirable phenomena introduce ripple into the LED output current. In this paper, a digitalized design is proposed to precisely compensate for the timing between alternating signals, significantly reducing output current ripple. This approach helps enhance power supply performance, extend component lifespan, and reduce LED index flicker.

Kinetics of hydrogen sulfide decomposition in a DBD plasma reactor operated at high temperature

The present study investigates the kinetics of hydrogen sulfide （H2S） decomposition into hydrogen and sulfur carded out in a nonthermal plasma dielectric barrier discharge （NTP-DBD） reactor operated at ,-430 K for in situ removal of sulfur condensed inside the reactor walls. The dissociation of H2S was primarily initiated by the excitation of carder gas （At） through electron collisions which appeared to be the rate determining step. The experiments were carded out with initial concentration of H2S varied between 5 and 25 vol% at 150 mL/min （at standard temperature and pressure） flow rate in the input power range of 0.5 to 2 W. The reaction rate model based on continuous stirred tank reactor （CSTR） model failed to explain the global kinetics of H2S decomposition, probably due to the multiple complex reactions involved in H2S decomposition, whereas Michaelis-Menten model was satisfactory. Typical results indicated that the reaction order approached zero with increasing inlet concentration.

在L-缬氨酸介质中应用聚二苯并-18-冠醚-6分离铈(Ⅲ)(英文)

A column chromatographic method has been developed for the separation and determination of cerium(Ⅲ) using poly[dibenzo-18-crown-6].The separation was carried out in L-valine medium.The adsorption of cerium(Ⅲ) was quantitative from 1×10-1 to 1×10-4 mol/L L-valine.Amongst the various eluents,1.0-8.0 mol/L hydrochloric acid,1.0-8.0 mol/L hydrobromic acid,1.0-8.0 mol/L perchloric acid,1.0-2.0 mol/L sulfuric acid and 4.0-5.0 mol/L acetic acid,were found to be the efficient eluents for cerium(Ⅲ).The capacity of poly[dibenzo-18-crown-6] for cerium(Ⅲ) was(0.428±0.01) mmol/g.The method was applied to the separation of cerium(Ⅲ) from associated elements link uranium(Ⅵ) and thorium(Ⅳ).It was also applied for the determination of cerium(Ⅲ) in geological samples.The method is simple,rapid and selective with good reproducibility(approximately±2%).

Lanthanum(Ⅲ) sorption studies on poly[dibenzo-18-crown-6] and its separation from uranium(Ⅵ) and thorium(Ⅳ) in L-valine medium

The sorption study of La(Ⅲ) was carried out on poly[dibenzo-18-crown-6] and L-valine medium. The quantitative adsorption of La(Ⅲ) was found at 1×10-2 to 1×10-5 mol/L L-valine. The various eluting agents were found efficient eluents for La(Ⅲ). The capacity of crown polymer for La(Ⅲ) was found to be 0.43 ±0.01 mmol/g. The tolerance limit of various cations and anions for La(Ⅲ) was determined. La(Ⅲ) was quantitatively separated from other metal ions in binary as well as multicomponent mixtures. The study was extended to sequential separation of La(Ⅲ), U(VI) and Th(IV). The good separation yields were obtained and had good reproducibility (±2%). The method incorporated the determination of La(Ⅲ) in real sample. The method was simple, rapid and selective.

A coupled ice-ocean ecosystem model for 1-D and 3-D applications in the Bering and Chukchi Seas

Primary production in the Bering and Chukchi Seas is strongly influenced by the annual cycle of sea ice. Here pelagic and sea ice algal ecosystems coexist and interact with each other. Ecosystem modeling of sea ice associated phytoplankton blooms has been understudied compared to open water ecosystem model applications. This study introduces a general coupled ice-ocean ecosystem model with equations and parameters for 1-D and 3-D applications that is based on 1-D coupled ice-ocean ecosystem model development in the landfast ice in the Chukchi Sea and marginal ice zone of Bering Sea. The biological model includes both pelagic and sea ice algal habitats with 10 compartments： three phytoplankton （pelagic diatom, flagellates and ice algae： D, F, and Ai） , three zooplankton （copepods, large zooplankton, and microzooplankton ： ZS, ZL, ZP） , three nutrients （ nitrate ＋ nitrite, ammonium, silicon ： NO3 , NH4, Si） and detritus （Det）. The coupling of the biological models with physical ocean models is straightforward with just the addition of the advection and diffusion terms to the ecosystem model. The coupling with a multi-category sea ice model requires the same calculation of the sea ice ecosystem model in each ice thickness category and the redistribution between categories caused by both dynamic and thermodynamic forcing as in the physical model. Phytoplankton and ice algal self-shading effect is the sole feedback from the ecosystem model to the physical model.

Gender Differences in the Prevalence of Overweight and Obesity,Associated Behaviors,and Weight-related Perceptions in a National Survey of Primary School Children in China

Objective To in vestigate potential gender differences in the odds of overweight/obese, weight-related perceptions, and behaviors among Chinese school children. Methods Height, weight, and a survey of weight-related perceptions and behaviors were measured in a nationally representative survey of 12,811 children in primary schools in China. Logistic regression analyses were used to assess gender differences, adjusting for confounders. Results Boys had higher odds of being overweight/obese compared to girls within both urban [adjusted odds ratio （OR） 2.30, 95% CI 2.00 to 2.65] and rural areas （OR = 1.85, 95% CI 1.55 to 2.20）. Girls reported healthier diets （e.g., daily vegetables OR = 0.79, 95% CI 0.73 to 0.85） whereas boys consumed fried food （OR = 1.21, 95% CI 1.06 to 1.38） and sugar-sweetened drinks more often （OR = 1.49, 95% CI 1.34 to 1.65）. Gender differences included higher odds of boys perceiving themselves as overweight if they had more highly educated mothers （OR = 1.35, 95% CI 1.09 to 1.68）, less educated fathers （OR = 0.79, 95% CI 0.63 to 0.99）, and if they frequently consumed carbonated drinks （OR = 1.48, 95% CI 1.07 to 2.05）. Conclusion Childhood obesity prevention in China should be gender-focused, particularly for boys who reported an unhealthier diet but were less likely to see they were fat, even though more boys were overweight or obese than girls.

Ecology and Diversity of Cyanobacteria in <i>Kuttanadu</i>Paddy Wetlands, Kerala, India

Algae are one of the major groups of soil microflora in agricultural lands. Among algae, the bluegreens are considered to be very valuable in agriculture. The role of them in soil fertility enhancement has been extensively studied worldwide. Sustainable utilization of an organism for any human purpose depends on how successfully the ecology of the same is thoroughly understood. Kuttanadu is a unique tropical paddy-wetland. Ecology of blue-green-algae and the exact diversity of the same in the zone remained unexplored. This is the first report of the blue-green-algal community of Kuttanadu in relation to different soil-regions, seasons, and crop-growth-stages. A rich blue-green-algal diversity of 64 species, with Oscillatoriales as the dominants (38%), is observed in these paddy-fields. The highest values for all the ecological parameters analyzed were found in the Lower Kuttanadu soil region, during Virippu season, at panicle stage of the crop whereas the lowest values for most of the parameters were observed in Upper Kuttanadu soils during puncha season at the seedling and panicle stages. The species richness and diversity index showed positive correlation to crop seasons. Apart from the specific soil and climatic factors, the total number of blue green algal isolates showed positive correlation to total nitrogen and phosphorus in the soils.

Light Enhancement of Solar Module

This paper presents sputtered-deposited Ag nanoparticles (NPs) on the encapsulant material (ethylene vinyl acetate, EVA) with the variation of annealing condition on crystalline silicon solar cell to enhance the light intensity, and a conventional solar cell is also performed for comparison. It was found that an increase in the transmittance at the wavelength of 500 - 800 nm was detected in the Ag nanoparticle solar cells. And red-light enhancement of around 2% was measured in the Ag-sputtered solar module under annealing condition of 700℃ for 3 min from incident photon to converted electron (IPCE) profile. The photovoltaic performance of solar modules was characterized by a flasher system in AAA class (temporal instability, spectral match, and irradiance non-uniformity). The IV curve showed a current enhancement with Ag-EVA sample, and thus a high power output around 0.250 W was observed. A high fill factor of 73.63% also implied a high performance in series and shunt resistance. Surface plasmonic resonance effects of Ag nanoparticles deposited on the surface of solar cell were examined and discussed. This paper not only illustrated the performance of the surface plasmonic resonance of a solar device but also verified the application in the industrial production.

The significance of water column nitrification in the southeastern Bering Sea

Nitrate is considered the nutrient that limits new primary production in the southeastern Bering Sea shelf. Nitrate regenerated through biological nitrification has the potential to significantly support primary production as well. Here we use measurements of the specific rate of water column nitrification in a 1-D ecosystem model to quantify the resupply of nitrate from nitrification in the middle shelf of the southeastern Bering Sea. Model sensitivity studies reveal nitrification rate is an important control on the dominant phytoplankton functional type, and the amount of nitrate in su mer bottom waters and in the winter water column. Evaluation of nitrification using the model supports the hypothesis that increases in late-summer nitrate concentrations observed in the southeastern Bering Sea bottom waters are due to nitrification. Model results for nitrate replenishment exceed previously estimated rates of 20-30% based on observations. The results of this study indicate that nitrification, potentially the source of up to - 38% of the springtime water column nitrate, could support - 24% of the annual primary production.

TRAPPED-FETCH WAVE MODEL APPLICATION TO TYPHOON CASE

The ’Trapped-Fetch Wave Model(TFWM)’, which is developed for wave prediction in north Atlantic hurricanes, is applied to typhoon cases in western North Pacific(WNP). The comparison with operational numerical ocean wind wave prediction system at Korea Meteorological Administration(KMA) is examined. In application to WNP typhoon, the TFWM has shown some advantage against typical operational spectral wave models. Even though the full spectral 3rd generation numerical wave model can provides a reliable wave field prediction, it has little value when the atmospheric model poorly predicts the location and intensity of concerned storms or tropical cyclone. The analysis of TFWM output should lead the forecaster back to a more in-depth examination of the full spectral wave model output, resulting in an improved forecast product. As a supporting guidance tool for marine forecaster, the TFWM has shown its own uniqueness and necessity.