The copper flash smelting process neural network model(CFSPNNM)was developed,its input layer includes eight nodes:oxygen grade(OG),oxygen volume per ton of concentrate(OVPTC),flux rate(FR)and quantifies of Cu,S,Fe,SiO...The copper flash smelting process neural network model(CFSPNNM)was developed,its input layer includes eight nodes:oxygen grade(OG),oxygen volume per ton of concentrate(OVPTC),flux rate(FR)and quantifies of Cu,S,Fe,SiO_2 and MgO in copper concentrate;output layer includes three nodes:matte grade,matte temperature and Fe/SiO_2 in slag,and net structure was 8-13-10-3.Then,the internal relationship between the technological parameters and the objective parameters was built after the CFSPNNM was trained by us...展开更多
The possibility of substituting 72.5Cu-22.7Zn-3.4Al brass for phosphorus bronze in some case that is now extensively used for elastic component,and purifying the scrap copper for recycling metal was investigated. By a...The possibility of substituting 72.5Cu-22.7Zn-3.4Al brass for phosphorus bronze in some case that is now extensively used for elastic component,and purifying the scrap copper for recycling metal was investigated. By adding a little amount of rare earth Y into scrap copper and 72.5Cu-22.7Zn-3.4Al brass to research their structure and characteristics,especially the electric conductivity for scrap copper and HV for the brass were researched. The results show that the tensile strength,elongation and electric conductivity(IACS) of 0.38 mm strip of scrap copper with 0.04% Y,are 213.8 MPa,23% and 98.5% that suit for the elastic components. The tensile strength,elongation and HV of 0.25mm strip of the brass with 0.03% Y are 665.1MPa,2.86% and 226 that satisfy the usage requirement for the elastic components. Meanwhile,the cost is cheaper than phosphorous bronze because of implying 22.7% zinc in the brass,which has the actual application value.展开更多
The degradation of Microcystin-LR (MC-LR) in water by hydrogen peroxide assisted ultraviolet (UV/H2O2) process was investigated in this paper. The UV/H2O2 process appeared to be effective in removal of the MC-LR. MC-L...The degradation of Microcystin-LR (MC-LR) in water by hydrogen peroxide assisted ultraviolet (UV/H2O2) process was investigated in this paper. The UV/H2O2 process appeared to be effective in removal of the MC-LR. MC-LR decomposition was primarily ascribed to production of strong and nonselective oxidant-hydroxyl radicals within the system. The intensity of UV radiation, initial concentration of MC-LR, MC-LR purity, dosages of H2O2, the initial solution pH, and anions present in water, to some extent, influenced the degradation rate of MC-LR. A modified pseudo-first-order kinetic model was developed to predict the removal efficiency under different experimental conditions.展开更多
基金Key Industrial Technology Development Project of China (No.20051255)National Natural Science Foundation of China (No.50364004)+1 种基金Scientific and Technological Project of Jiangxi Province (No.20061B0101100)Natural Science Foundation of Jiangxi Province (No.2007GZC0713)
文摘The copper flash smelting process neural network model(CFSPNNM)was developed,its input layer includes eight nodes:oxygen grade(OG),oxygen volume per ton of concentrate(OVPTC),flux rate(FR)and quantifies of Cu,S,Fe,SiO_2 and MgO in copper concentrate;output layer includes three nodes:matte grade,matte temperature and Fe/SiO_2 in slag,and net structure was 8-13-10-3.Then,the internal relationship between the technological parameters and the objective parameters was built after the CFSPNNM was trained by us...
基金Project (2006AA03Z522) supported by the Hi-tech Research and Development Program of ChinaProject (50704006) supported by the National Natural Science Foundation of ChinaProject (550033) supported by the Natural Science Foundation of Jiangxi Province, China
文摘The possibility of substituting 72.5Cu-22.7Zn-3.4Al brass for phosphorus bronze in some case that is now extensively used for elastic component,and purifying the scrap copper for recycling metal was investigated. By adding a little amount of rare earth Y into scrap copper and 72.5Cu-22.7Zn-3.4Al brass to research their structure and characteristics,especially the electric conductivity for scrap copper and HV for the brass were researched. The results show that the tensile strength,elongation and electric conductivity(IACS) of 0.38 mm strip of scrap copper with 0.04% Y,are 213.8 MPa,23% and 98.5% that suit for the elastic components. The tensile strength,elongation and HV of 0.25mm strip of the brass with 0.03% Y are 665.1MPa,2.86% and 226 that satisfy the usage requirement for the elastic components. Meanwhile,the cost is cheaper than phosphorous bronze because of implying 22.7% zinc in the brass,which has the actual application value.
基金supported by the National Key Technologies Supporting Program of China during the 11th Five-Year Plan Period (No. 2006BAJ08B06)the National Major Project of Science & Technology Ministry of China (No. 2008ZX07421-002)the Shanghai Science & Technology Commission Key Scientific & Technological Project (No. 072312001), China
文摘The degradation of Microcystin-LR (MC-LR) in water by hydrogen peroxide assisted ultraviolet (UV/H2O2) process was investigated in this paper. The UV/H2O2 process appeared to be effective in removal of the MC-LR. MC-LR decomposition was primarily ascribed to production of strong and nonselective oxidant-hydroxyl radicals within the system. The intensity of UV radiation, initial concentration of MC-LR, MC-LR purity, dosages of H2O2, the initial solution pH, and anions present in water, to some extent, influenced the degradation rate of MC-LR. A modified pseudo-first-order kinetic model was developed to predict the removal efficiency under different experimental conditions.
