The main objective of this research is to investigate the hygroelastic behavior of a non-homogeneous circular plate made up of porous metamaterial resting on an auxetic material plate.The mechanical properties of the ...The main objective of this research is to investigate the hygroelastic behavior of a non-homogeneous circular plate made up of porous metamaterial resting on an auxetic material plate.The mechanical properties of the main plate,as well as moisture concentration,vary as an exponential function in the transverse direction.Poisson’s ratio is constant.The elastic supporting medium is developed by considering the structurestructure coupling.Based on the linear hygroelasticity theory,the governing state equations in terms of displacements and moisture concentration are acquired.At first,the Fickian equation is solved to compute the nonlinear distribution of moisture through the plate thickness,and then the state equations are semi-analytically solved using the statespace(SS)method and the differential quadrature(DQ)rule to predict the elastic field quantities.A comprehensive parametric analysis is accomplished to elucidate the effects of key parameters on the steady-state response of the plate under the mechanical and hygral loads.展开更多
Anisotropic plates in different applications may have geometric defects such as openings and cracks.The presence of the opening disturbs the heat flow,which creates significant thermal stress around the opening.When t...Anisotropic plates in different applications may have geometric defects such as openings and cracks.The presence of the opening disturbs the heat flow,which creates significant thermal stress around the opening.When the heat flux is high enough,these extreme stresses can lead to structural failure.This article aims to obtain the optimal parameters for achieving the minimum value of the normalized stress near the cutout’s boundary in perforated anisotropic plates utilizing the genetic algorithm.Optimization parameters include the curvature of opening’s corners,orientation angle of opening,fibers angle,heat flux angle,and opening’s elongation.The plate is under heat flux,and the opening’s border is thermally insulated.The stress distribution around the opening is calculated using Lekhnitskii’s complex variable method and complex potential functions.The genetic algorithm is then implemented to find the optimal values for design parameters.The results show that by selecting the optimal parameters related to the anisotropic material and the opening’s geometry,the stress intensity factor of the perforated anisotropic plates is remarkably reduced.Furthermore,this optimization algorithm can be extended to find the optimized parameters and achieve the optimal designs in anisotropic and isotropic perforated plates under thermal loadings.展开更多
The middle layer model has been used in recent years to better describe the connection behavior in composite structures.The influencing parameters including low pre-screw and high preload have the main effects on nonl...The middle layer model has been used in recent years to better describe the connection behavior in composite structures.The influencing parameters including low pre-screw and high preload have the main effects on nonlinear behavior of the connection as well as the amplitude of the excitation force applied to the structure.Therefore,in this study,the effects of connection behavior on the general structure in two sections of increasing damping and reducing the stiffness of the structures that lead to non-linear phenomena have been investigated.Due to the fact that in composite structure we are faced to the limitation of increasing screw preload which tend to structural damage,so the investigation on the hybrid connection(metal-composite)behavior is conducted.In this research,using the two-dimensional middle layer theory,the stiffness properties of the connection are modeled by normal stiffness and the connection damping is modeled using the structural damping in the shear direction.Nonlinear frequency response diagrams have been extracted twice for two different excitation forces and then proposed by a high-order multitasking approximation according to the response range of the nonlinear finite element model for stiffness and damping of the connection.The effect of increasing the amplitude of the excitation force and decreasing the preload of the screw on the nonlinear behavior of the component has been extracted.The results show that the limited presented novel component model has been accurately verified on the model obtained from the vibration experimental test and the reduction of nonlinear model updating based on that is represented.The comparison results show good agreementwith a maximumof 1.33%error.展开更多
The present paper focuses on finding an analytical solution for fully developed third-grade non-Newtonian fluids flows inside rough circular pipes at low Reynolds numbers(Stokes flows).The wall roughness is modeled by...The present paper focuses on finding an analytical solution for fully developed third-grade non-Newtonian fluids flows inside rough circular pipes at low Reynolds numbers(Stokes flows).The wall roughness is modeled by two different periodic morphologies based on sinusoidal and triangular geometries.In this study,the relative roughness(ratio of the roughness amplitude to the pipe hydraulic diameter)is selected to be a small value,which is appropriate for the perturbation analysis.The governing parameters including the axial and radial velocity profiles,stream function,wall shear stress,pressure gradient,and friction factor are expressed in analytical formulas and they are compared to the smooth pipe.The effect of the relative roughness,the wall wave number,and the non-Newtonian parameter on the governing parameters are investigated.The results show that modeling the roughness by triangular geometry has a better prediction of pressure drop regarding the basic solution of the smooth pipe.展开更多
文摘The main objective of this research is to investigate the hygroelastic behavior of a non-homogeneous circular plate made up of porous metamaterial resting on an auxetic material plate.The mechanical properties of the main plate,as well as moisture concentration,vary as an exponential function in the transverse direction.Poisson’s ratio is constant.The elastic supporting medium is developed by considering the structurestructure coupling.Based on the linear hygroelasticity theory,the governing state equations in terms of displacements and moisture concentration are acquired.At first,the Fickian equation is solved to compute the nonlinear distribution of moisture through the plate thickness,and then the state equations are semi-analytically solved using the statespace(SS)method and the differential quadrature(DQ)rule to predict the elastic field quantities.A comprehensive parametric analysis is accomplished to elucidate the effects of key parameters on the steady-state response of the plate under the mechanical and hygral loads.
文摘Anisotropic plates in different applications may have geometric defects such as openings and cracks.The presence of the opening disturbs the heat flow,which creates significant thermal stress around the opening.When the heat flux is high enough,these extreme stresses can lead to structural failure.This article aims to obtain the optimal parameters for achieving the minimum value of the normalized stress near the cutout’s boundary in perforated anisotropic plates utilizing the genetic algorithm.Optimization parameters include the curvature of opening’s corners,orientation angle of opening,fibers angle,heat flux angle,and opening’s elongation.The plate is under heat flux,and the opening’s border is thermally insulated.The stress distribution around the opening is calculated using Lekhnitskii’s complex variable method and complex potential functions.The genetic algorithm is then implemented to find the optimal values for design parameters.The results show that by selecting the optimal parameters related to the anisotropic material and the opening’s geometry,the stress intensity factor of the perforated anisotropic plates is remarkably reduced.Furthermore,this optimization algorithm can be extended to find the optimized parameters and achieve the optimal designs in anisotropic and isotropic perforated plates under thermal loadings.
基金This work was supported by College of Engineering and Technology,American University of the Middle East,Kuwait。
文摘The middle layer model has been used in recent years to better describe the connection behavior in composite structures.The influencing parameters including low pre-screw and high preload have the main effects on nonlinear behavior of the connection as well as the amplitude of the excitation force applied to the structure.Therefore,in this study,the effects of connection behavior on the general structure in two sections of increasing damping and reducing the stiffness of the structures that lead to non-linear phenomena have been investigated.Due to the fact that in composite structure we are faced to the limitation of increasing screw preload which tend to structural damage,so the investigation on the hybrid connection(metal-composite)behavior is conducted.In this research,using the two-dimensional middle layer theory,the stiffness properties of the connection are modeled by normal stiffness and the connection damping is modeled using the structural damping in the shear direction.Nonlinear frequency response diagrams have been extracted twice for two different excitation forces and then proposed by a high-order multitasking approximation according to the response range of the nonlinear finite element model for stiffness and damping of the connection.The effect of increasing the amplitude of the excitation force and decreasing the preload of the screw on the nonlinear behavior of the component has been extracted.The results show that the limited presented novel component model has been accurately verified on the model obtained from the vibration experimental test and the reduction of nonlinear model updating based on that is represented.The comparison results show good agreementwith a maximumof 1.33%error.
文摘The present paper focuses on finding an analytical solution for fully developed third-grade non-Newtonian fluids flows inside rough circular pipes at low Reynolds numbers(Stokes flows).The wall roughness is modeled by two different periodic morphologies based on sinusoidal and triangular geometries.In this study,the relative roughness(ratio of the roughness amplitude to the pipe hydraulic diameter)is selected to be a small value,which is appropriate for the perturbation analysis.The governing parameters including the axial and radial velocity profiles,stream function,wall shear stress,pressure gradient,and friction factor are expressed in analytical formulas and they are compared to the smooth pipe.The effect of the relative roughness,the wall wave number,and the non-Newtonian parameter on the governing parameters are investigated.The results show that modeling the roughness by triangular geometry has a better prediction of pressure drop regarding the basic solution of the smooth pipe.
