The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specim...The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specimens from Portland Pozzolana Cement （PPC）. The breakage process of the specimens was studied by inserting single and double flaws with different inclination angles at the center and applying uniaxial compressive stress at both ends of the specimen. The first crack was oriented at 50＆#176; from the horizontal direction and kept constant throughout the analysis while the orientation of the second crack was changed. It is experimentally observed that the wing cracks are produced at the first stage of loading and start their propagation toward the direction of uniaxial compressive loading. The secondary cracks may also be produced in form of quasi-coplanar and/or oblique cracks in a stable manner. The secondary cracks may eventually continue their propagation in the direction of maximum principle stress. These experimental works were also simulated numerically by a modified higher order displacement discontinuity method and the cracks propagation and cracks coalescence were studied based on Mode I and Mode II stress intensity factors （SIFs）. It is concluded that the wing cracks initiation stresses for the specimens change from 11.3 to 14.1 MPain the case of numerical simulations and from 7.3 to 13.8 MPa in the case of experimental works. It is observed that cracks coalescence stresses change from 21.8 to 25.3 MPa and from 19.5 to 21.8 MPa in the numerical and experimental analyses, respectively. Comparing some of the numerical and experimental results with those recently cited in the literature validates the results obtained by the proposed study. Finally, a numerical simulation was accomplished to study the effect of confining pressure on the crack propagation process, showing that the SIFs increase and the crack initiation angles change in this case.展开更多
Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerica...Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerically. In this research, the cracks coalescence paths in Brazilian disc and rectangular specimens made from rock-like material containing multi-holes are investigated. These concrete specimens are specially prepared from an appropriate mixture of Portland Pozzolana Cement （PPC）, fine sands, and water. The pre-holed Brazilian discs and rectangular specimens are experimentally tested under compression. The breakage load in the ring type disc specimens containing an axial hole with varying diameters is measured and the distribution of the induced lateral stress is obtained. The mechanism of cracks propagation in the wall of the ring type specimens is also stud- ied. In the case of multi-hole Brazilian disc and rectangular specimens, the cracks propagation and cracks coalescence are also investigated. These experiments are numerically modeled by a modified higher order displacement discontinuity method. It has been shown that the corresponding experimental and numerical results are in good agreement with each other. The results presented in this research vali date the accuracy and applicability of these crack analyses procedures.展开更多
Linear elastic fracture mechanics principles are widely applied for the analysis of crack problems in rock fracture mechanics. Rock indentation is an important and complicated problem among rock engineering issues. In...Linear elastic fracture mechanics principles are widely applied for the analysis of crack problems in rock fracture mechanics. Rock indentation is an important and complicated problem among rock engineering issues. In this paper, in addition to the fracture criterion of maximum tangential stress adjacent to crack tip, the higher order displacement discontinuity method (which is a version of the indirect boundary element method) has been used for modeling the crack propagation mechanism under blunt indenters. In order to achieve more accurate results, higher order boundary elements i.e. quadratic elements, has been used to calculate displacement discontinuities and also to reduce the singularities of stress and displacement fields near the crack tip, the special crack tip elements has been used to calculate the stress intensity factors (SIF) at the crack tips. In this modeling, the effect of crack angle on stress intensity factors has been investigated. The numerical results of stress intensity factors obtained from some example problems were compared to the theoretical and experimental results cited in the literature which always show a percentage error less than one percent. The simulated results may pave the way for increasing the efficiency of mining and drilling by improving the design of tools and indentation equipments.展开更多
A simultaneous experimental and numerical study of shear fracture of concrete-like materials is carried out using Brazilian disc specimens with initial double edge cracks and fourpoint bending beam specimens with doub...A simultaneous experimental and numerical study of shear fracture of concrete-like materials is carried out using Brazilian disc specimens with initial double edge cracks and fourpoint bending beam specimens with double edge-notches.The interference effects of two cracks/notches are investigated through varied ligament angles and crack lengths.It is shown that shear fracturing paths change remarkably with the initial ligament angles and crack lengths.The cracked specimens are numerically simulated by an indirect boundary element method.A comparison between the numerical results and the experimental ones shows good agreement.展开更多
文摘The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specimens from Portland Pozzolana Cement （PPC）. The breakage process of the specimens was studied by inserting single and double flaws with different inclination angles at the center and applying uniaxial compressive stress at both ends of the specimen. The first crack was oriented at 50＆#176; from the horizontal direction and kept constant throughout the analysis while the orientation of the second crack was changed. It is experimentally observed that the wing cracks are produced at the first stage of loading and start their propagation toward the direction of uniaxial compressive loading. The secondary cracks may also be produced in form of quasi-coplanar and/or oblique cracks in a stable manner. The secondary cracks may eventually continue their propagation in the direction of maximum principle stress. These experimental works were also simulated numerically by a modified higher order displacement discontinuity method and the cracks propagation and cracks coalescence were studied based on Mode I and Mode II stress intensity factors （SIFs）. It is concluded that the wing cracks initiation stresses for the specimens change from 11.3 to 14.1 MPain the case of numerical simulations and from 7.3 to 13.8 MPa in the case of experimental works. It is observed that cracks coalescence stresses change from 21.8 to 25.3 MPa and from 19.5 to 21.8 MPa in the numerical and experimental analyses, respectively. Comparing some of the numerical and experimental results with those recently cited in the literature validates the results obtained by the proposed study. Finally, a numerical simulation was accomplished to study the effect of confining pressure on the crack propagation process, showing that the SIFs increase and the crack initiation angles change in this case.
基金sponsored by Iran’s National Elites Foundation (INEF)
文摘Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerically. In this research, the cracks coalescence paths in Brazilian disc and rectangular specimens made from rock-like material containing multi-holes are investigated. These concrete specimens are specially prepared from an appropriate mixture of Portland Pozzolana Cement （PPC）, fine sands, and water. The pre-holed Brazilian discs and rectangular specimens are experimentally tested under compression. The breakage load in the ring type disc specimens containing an axial hole with varying diameters is measured and the distribution of the induced lateral stress is obtained. The mechanism of cracks propagation in the wall of the ring type specimens is also stud- ied. In the case of multi-hole Brazilian disc and rectangular specimens, the cracks propagation and cracks coalescence are also investigated. These experiments are numerically modeled by a modified higher order displacement discontinuity method. It has been shown that the corresponding experimental and numerical results are in good agreement with each other. The results presented in this research vali date the accuracy and applicability of these crack analyses procedures.
文摘Linear elastic fracture mechanics principles are widely applied for the analysis of crack problems in rock fracture mechanics. Rock indentation is an important and complicated problem among rock engineering issues. In this paper, in addition to the fracture criterion of maximum tangential stress adjacent to crack tip, the higher order displacement discontinuity method (which is a version of the indirect boundary element method) has been used for modeling the crack propagation mechanism under blunt indenters. In order to achieve more accurate results, higher order boundary elements i.e. quadratic elements, has been used to calculate displacement discontinuities and also to reduce the singularities of stress and displacement fields near the crack tip, the special crack tip elements has been used to calculate the stress intensity factors (SIF) at the crack tips. In this modeling, the effect of crack angle on stress intensity factors has been investigated. The numerical results of stress intensity factors obtained from some example problems were compared to the theoretical and experimental results cited in the literature which always show a percentage error less than one percent. The simulated results may pave the way for increasing the efficiency of mining and drilling by improving the design of tools and indentation equipments.
基金Project supported by Iran's National Elites Foundation(INEF)Partial supports of center of excellent for structures and earthquake engineering at Sharif University of technology
文摘A simultaneous experimental and numerical study of shear fracture of concrete-like materials is carried out using Brazilian disc specimens with initial double edge cracks and fourpoint bending beam specimens with double edge-notches.The interference effects of two cracks/notches are investigated through varied ligament angles and crack lengths.It is shown that shear fracturing paths change remarkably with the initial ligament angles and crack lengths.The cracked specimens are numerically simulated by an indirect boundary element method.A comparison between the numerical results and the experimental ones shows good agreement.
