Analysis of CH_(4) and H_(2) Adsorption on Heterogeneous Shale Surfaces Using aMolecular Dynamics Approach

Determining the adsorption of shale gas on complex surfaces remains a challenge in molecular simulation studies.Difficulties essentially stem from the need to create a realistic shale structure model in terms of mineral heterogeneityand multiplicity.Moreover,precise characterization of the competitive adsorption of hydrogen andmethane in shale generally requires the experimental determination of the related adsorptive capacity.In thisstudy,the adsorption of adsorbates,methane(CH_(4)),and hydrogen(H_(2))on heterogeneous shale surface modelsof Kaolinite,Orthoclase,Muscovite,Mica,C_(60),and Butane has been simulated in the frame of a moleculardynamic’s numerical technique.The results show that these behaviors are influenced by pressure and potentialenergy.On increasing the pressure from 500 to 2000 psi,the sorption effect for CH_(4)significantly increasesbut shows a decline at a certain stage(if compared to H_(2)).The research findings also indicate that raw shalehas a higher capacity to adsorb CH_(4)compared to hydrogen.However,in shale,this difference is negligible.

Physical Activation of Elderly and the Decrease of Falling Risk

A Physical Activation Program was designed and implemented with a particular emphasis in recovering of motor independence, and in an indirect manner;the increase of activities was carried out in a social context in such a way that it allowed isolated elderly to develop their ability to perform daily activities diminishing the burden on their caregivers. 30 people were randomly selected: 15 subjects in the experimental group and 15 in the control group;7 women and 8 men each group. Subjects aged between 60 - 84 years with a mean age of 78 years and a standard deviation of 6.5 were applied in a three-month Physical Activation Program with a 45-min daily sessions. Results obtained showed that physical activity in elderly, systematically improved their amplitude and joint mobility which impact directly and indirectly their quality of life, reducing their risk of falling.

Diagnosis of the Physical Area of Community-Dwelling Adults

A situational analysis of aspects related to the physical area of elderly residents of permanent stay of the city of Chihuahua was performed. Participating in the study 51 subjects, 30 women and 21 men, Tinetti and trunk flexion EUROFIT scales were applied to assess fall risk and range of motion. The poor results in balance, gait and range of motion can be stated that most of them are in serious risk of falling. The results obtained show the urgency of starting a physical activation program that emphasizes directly in recovery mobile independence so that enable seniors asylees enhance your ability to perform activities of daily life and reduce the burden on their caregivers.

The ALMA-QUARKS Survey.Ⅱ.The ACA 1.3 mm Continuum Source Catalog and the Assembly of Dense Gas in Massive Star-Forming Clumps

Leveraging the high resolution,sensitivity,and wide frequency coverage of the Atacama Large Millimeter/submillimeter Array(ALMA),the QUARKS survey,standing for“Querying Underlying mechanisms of massive star formation with ALMA-Resolved gas Kinematics and Structures”,is observing 139 massive starforming clumps at ALMA Band 6(λ~1.3 mm).This paper introduces the Atacama Compact Array(ACA)7 m data of the QUARKS survey,describing the ACA observations and data reduction.Combining multiwavelength data,we provide the first edition of QUARKS atlas,offering insights into the multiscale and multiphase interstellar medium in high-mass star formation.The ACA 1.3 mm catalog includes 207 continuum sources that are called ACA sources.Their gas kinetic temperatures are estimated using three formaldehyde transitions with a non-LTE radiation transfer model,and the mass and density are derived from a dust emission model.The ACA sources are massive(16–84 percentile values of 6–160 M_(⊙)),gravity-dominated(M∝R^(1.1))fragments within massive clumps,with supersonic turbulence(M>1)and embedded star-forming protoclusters.We find a linear correlation between the masses of the fragments and the massive clumps,with a ratio of 6%between the two.When considering fragments as representative of dense gas,the ratio indicates a dense gas fraction(DGF)of 6%,although with a wide scatter ranging from 1%to 10%.If we consider the QUARKS massive clumps to be what is observed at various scales,then the size-independent DGF indicates a self-similar fragmentation or collapsing mode in protocluster formation.With the ACA data over four orders of magnitude of luminosity-to-mass ratio(L/M),we find that the DGF increases significantly with L/M,which indicates clump evolutionary stage.We observed a limited fragmentation at the subclump scale,which can be explained by a dynamic global collapse process.

Performance of La_(1-x)Sr_xCr_(1-y)Mn_yO_(3-δ) anode materials for intermediate temperature solid oxide fuel cell

La1-xSrxCr1-yMnyO3-δ(LSCM) anode materials were synthesized by glycine nitrate process(GNP). Thermo-gravimetric analysis(TGA) and differential scanning calorimetric(DSC) methods were adopted to investigate the reaction process of LSCM anode materials. The oxides prepared were characterized via X-ray diffraction(XRD),scanning electron microscope and energy dispersive spectroscopy(SEM-EDS),direct current four-electrode and temperature process reduction(TPR) techniques. XRD patterns indicate that perovskite phase created after the precursor was sintered at 1 000 ℃ for 5 h,and single perovskite-type oxides formed after the precursor were sintered at 1 200 ℃ for 5 h. The powders are micrometer size after sintering at 1 000 ℃ and 1 200 ℃,respectively. The conductivities of LSCM samples increase linearly with increasing the temperature from 250 ℃ to 850 ℃ in air and the maximum value is 32 S/cm for La0.7Sr0.3Cr0.5Mn0.5O3-δ. But it is lower about two orders of magnitude in pure hydrogen or methane than that of the same sample in the air. TPR result indicates that LSCM offers excellently catalytic performance.

Trace and rare earth element geochemistry of the black and grey shales of the Calabar Flank, Southeastern Nigeria: constraints on the depositional environment and the degree of metal enrichment

This study focuses on the trace and rare earth elements(REE)geochemistry of the Nkporo and Ekenkpon Shales of the Calabar Flank.The main aim is to infer their depositional environment and the degree of their metal enrichment.The shale samples were analyzed using inductively coupled plasma mass spectrometry.The results indicated that the mean concentrations of K,Na,and Fe in Nkporo and Ekenkpon Shales are 1.45,0.4,and 4.17 wt%,and 1.11,0.44,and 5.42 wt%;respectively.The Nkporo Shale is enriched with the following trace elements;P>Mn>Sr>Ba>Zn>Ce>Rb>Zr>V>Cr>Ni and depleted in the following trace elements;Ta>Ge>Sb>Bi>Cd>Ag>Te>In>Hg.While the Ekenkpon Shale is enriched with the following trace elements;P>Mn>Ba>Sr>V>Ce>Zr>Rb>Cr>Zn>Ni and depleted in;Sb>Ge>Bi>Ag>Ce>Te>In>Hg.The concentration of redox-sensitive elements such as V,Ni,Mo,U,Cu,Cr,Re,Cd,Sb,Ti,Mn,and their ratio V/Mo and U/Mo in the black and grey shale samples show different patterns.The REE obtained from the Nkporo and Ekenkpon Shales were PAAS normalized.The Nkporo Shale showed a slightly flat light rare-earth element(LREE),middle rare-earth element(MREE),and heavy rare earth element(HREE)pattern enrichment.Ce/Ce*ranges from 0.95 to 1.09 in Nkporo Shale and 0.67 to 1.40 in Ekenkpon Shale.The Ekenkpon Shale showed a slight LREE,MREE enrichment,and depleted HREE patterns.The Mn contents and U/Mo ratio in Nkporo and Ekenkpon Shales suggests a poor oxygen transitional environment.The V/Mo and V/(V+Ni)ratios indicated that the Nkporo shales were deposited in an anoxic to suboxic conditions and Ekenkpon shales were also deposited under an anoxic to suboxic conditions.The V/Ni ratio indicated that the organic matter in the Nkporo shale is terrigenous while that of the Ekenkpon shales are both terrigenous and marine in origin.

Calcium and phosphorus contents of body parts of some domestic animals used as meat source in Nigeria

Objective:To investigate the calcium and phosphorus contents of four domestic animals used as sources of meat in Nigeria.Methods:The calcium contents of the body parts of the animals were determined using atomic absorption spectrometer.Their phosphorus contents were determined colorimetrically using the molybdenum blue method.Results:The calcium and phosphorus contents were significantly higher in the bone samples than in the other animal parts investigated (P【0.05).The calcium contents of all the edible parts were higher in chicken than in the other animals.High calcium and phosphorus contents were detected in the faeces of chicken and goat, and that of cattle and goat,respectively.Low calcium and phosphorus contents were detected in the urine samples.Calcium:phosphorus ratios calculated for the bones of chicken,cattle and goat were satisfactory.Conclusions:In conclusion,calcium and phosphorus contents of the animal parts vary significantly and their relative contents may be related to the animal’s diet.Chicken parts may be the preferred dietary source of these minerals.This study highlights the need for routine investigation of the mineral contents of food,which is necessary for proper nutritional guidelines.

Profiling the effects of microwave-assisted and soxhlet extraction techniques on the physicochemical attributes of Moringa oleifera seed oil and proteins

There is a constant search for biomaterials from natural products like plants for food and industrial applications.The work embodied in this report aimed at investigating the effects of microwave-assisted and soxhlet extraction(MAE and SE) techniques on the functional physicochemical quality characteristics of Moringa oleifera seed oil and proteins extracts. M. oleifera seeds were ground to fine powders and oil was extracted by microwave-assisted and soxhlet extraction techniques using petroleum ether. Quality attributes including yield percent, moisture content,iodine, saponification, specific gravity, viscosity, p H, thiobarbituric acid, acid and peroxide values were measured. Mineral and vitamin contents, chemical/functional groups, fatty acid(FA) composition, and reducing power of the oil were evaluated. Metabolomics of protein extracted from the defatted powders were analyzed by nuclear magnetic resonance(NMR). M. oleifera oil from MAE and SE methods had good yield(34.25 ± 0.0%,28.75 ± 0.0%), low moisture content(0.008 ± 0.0%, 0.011 ± 0.0%), non-drying and unsaturated, moderately saponified, less dense(0.91 ± 0.01, 0.92 ± 0.02 g m L^(-1)), had Newtonian flow, were weakly acidic, showed good content of FAs, recorded strong potential for long shelf-life, showed stability against oxidative rancidity and enzymatic hydrolysis, had very rich deposits of micro-and macro-nutrients as well as water-soluble and lipidsoluble vitamins, and functional groups in the oil were reflective of its content of long-and medium-chain triglycerides(LCT and MCT). Monounsaturated and saturated fatty acids(MUFA and SFA) were detected and the oil has excellent ferric ion reducing power. NMR metabolomic assay revealed the presence of nine essential amino acids(EAAs) in the protein extract. MAE technique is a feasible and acceptable alternative for high throughput extraction of M. oleifera oil with high yield and excellent quality attributes. The study revealed that MAE did not impart any remarkable advantage(s) on the physicochemical properties of M. oleifera seed oil and protein compared to SE technique.

Adsorption Isotherms and Kinetic Studies of Congo-Red Removal from Waste Water Using Activated Carbon Prepared from Jujube Seed

In this study, adsorption of Congo red dye onto activated carbon prepared from Jujube (Ziziphus Mauritiania) seeds with phosphoric acid as the activating agent was investigated. Batch adsorption studies were carried out to study the influence of contact time, adsorbent dosage and initial dye concentration on the adsorption. The data was analysed using pseudo-first order and pseudo-second order kinetic models. The pseudo-second order kinetic model was found to describe the adsorption more effectively with a perfect correlation coefficient of unity. The rate constant, K was obtained as 0.182 (g/mg min) and the calculated qe (9.81) is very close to the experimental value (9.78). A high correlation coefficient obtained when the data was analysed with the intraparticle diffusion rate equation, revealed the presence of intraparticle diffusion in the adsorption process even though it is not the sole controlling step as shown by the value of the intercept (C ≠ 0). Isotherm studies showed that there is high correlation in each case when the data was modelled with Langmuir, Freundlich, Temkin and Dubinin-Radushkevic isotherm models but the best fit was obtained with the Freundlich model with R2 = 0.9991, adsorption capacity, KF = 19.73 (mg/g)(mg/L)1/n and n = 1.563 indicating the adsorption is favourable and occurs on a heterogeneous surface by multilayer. The study showed that activated carbon from jujube seeds is an effective adsorbent for the removal of Congo red dye from solution.

Investigating Contributions of Total Column Ozone Variation on Some Meteorological Parameters in Nigeria

The relationship between some meteorological parameters and variation of total column ozone (TCO) concentration in Nigeria is studied from 1998-2012. The results using a descriptive analysis revealed a seasonal ozone variation having the same trend in all the stations during the period of study. High variability of TCO occurred between December and March coinciding with the period of dry season and low variability of TCO was observed in August coinciding with the period of rainy season. The observed trends in all the stations show that the TCO variation in Nigeria is mostly caused by natural occurrences. Calabar and Port Harcourt stations showed a high percent of TCO variability, while Kano and Maiduguri indicated a low percentage of TCO variability. Using Spearman correlation analysis, TCO concentration has a strong negative correlation with temperature in some stations with correlation coefficient (r) (-0.8392, -0.8531, -0.7832, -8881 and -0.7902) for Calabar, Port Harcourt, Makurdi, Lagos and Ilorin respectively. Kano and Maiduguri showed a weak positive correlation coefficient (r) 0.4965 and 0.3776 respectively. Positive correlation observed in Kano and Maiduguri could be as a result of high dehydration of water vapour in these stations due to seasonal harmattan and latitudinal effects. Probably, some of the substances that could deplete ozone such as HCl, aerosol are soluble in water thereby being washed off by rain during wet season leading to maximum TCO concentration during rainy season. Consequently, the observed phenomenon is through transportation of ozone content through the influence of Brewer-Dobson circulation. Again, during wet season, there is the mechanism of low pressure and lower tropopause height phenomenon, therefore, total ozone enhancement. Interestingly, variation in TCO is part of symbolic tools for tropospheric meteorology alteration and this invariably leads to climate change.

Performance of LSCM-CDC Composite Anode for ITSOFC

It was prepared by glycine-nitrate process (GNP) method for a novel composite material La0.7Sr0.3Cr0.5Mn0.5O3-δ-Ce0.8Ca0.2O2-δ (LSCM-CDC) used for anode of intermediate temperature solid oxide fuel cell (ITSOFC). The microstructure and properties of composite anode LSCM-CDC were measured via X-ray diffraction (XRD), scanning electron microscopy (SEM), AC impedance and four-probe direct current methods. Fluorite-perovskite compounded phase structure was obtained after being sintered at 1400 ℃ for 15 h, the optimum composition of the composite anode of LSCM and CDC was 7 to 3 at molar ratio. At 850 ℃, the electronic conductivity was 6.49 S·cm-1 in air and 1 S·cm-1 in the reduction atmosphere, respectively. The AC impedance spectra with two arcs showed that LSCM-CDC had low ionic conductivity, which was about two orders of magnitude lower than the electronic conductivity. LSCM-CDC composite anode was stable under different temperatures in pure methane gas with good catalytic performance, which indicated that the composite was a promising anode for ITSOFC.

Experimental study on the characteristics of DBD plasma coal liquefaction by using coal nanopowder

A new method for liquefying coal using dielectric barrier discharge plasma has been studied.By utilizing waste oil as the solvent and processing coal nano powder in the plasma for 10 min,we have attained a liquid yield of more than 80%.The experiment shows that not only the coal nanopowder promoted the liquefaction process,but hydrogen radicals improved the liquid yield effectively.In the plasma processing,the phenomenon of the changing color of the nanopowder solution and not producing a solid residue has been obviously observed.The rational parameters that affected the liquefaction of coal nanopowder have been achieved through the experiment,and the liquefied products have been analyzed.

Quantum Chemistry Study on Benzimidazoledithi Derivatives' Selective Pre-enrichment of Cadmium Cation

This work reports the mechanism of benzimidazoledithi(BDT) derivatives’ selective pre-enrichment of Cd2+under the stimulation of glutathione(GSH). The geometric and electronic properties of five BDT-M2+complexes(M = Cd, Cu, Hg, Pb, Co) have been investigated using density functional theory(DFT) at the B3 LYP/6-311 G(d,p) level with the GAUSSIAN 09 package program. The results show that BDT ligand exhibits alternative behaviors to different metal ions with the binding affinity in the order of Cu2+> Cd2+> Pb2+> Hg2+> Co2+. After adding the BDT-M2+complex into the GSH solution, the new S–S bonds can be formed, resulting with benzimidazole-metal ions(MBI-M2+) falling off into the GSH solution. Furthermore, the weak interaction between the new glutathione derivative(GSHD) and MBI-M2+were found. However, the strong chelation was detected between GSHD and MBI-M2+(M = Cu, Pb, Hg, Co) to hinder the adsorbed Cu2+, Pb2+and Hg2+, Co2+completely falling into the GSH solution, which suggests porous silicon composite modified by BDT has a certain selective pre-enrichment of Cd2+ion.

Comparison of Outlier Techniques Based on Simulated Data

This research work employed a simulation study to evaluate six outlier techniques: t-Statistic, Modified Z-Statistic, Cancer Outlier Profile Analysis (COPA), Outlier Sum-Statistic (OS), Outlier Robust t-Statistic (ORT), and the Truncated Outlier Robust t-Statistic (TORT) with the aim of determining the technique that has a higher power of detecting and handling outliers in terms of their P-values, true positives, false positives, False Discovery Rate (FDR) and their corresponding Receiver Operating Characteristic (ROC) curves. From the result of the analysis, it was revealed that OS was the best technique followed by COPA, t, ORT, TORT and Z respectively in terms of their P-values. The result of the False Discovery Rate (FDR) shows that OS is the best technique followed by COPA, t, ORT, TORT and Z. In terms of their ROC curves, t-Statistic and OS have the largest Area under the ROC Curve (AUC) which indicates better sensitivity and specificity and is more significant followed by COPA and ORT with the equal significant AUC while Z and TORT have the least AUC which is not significant.

Statistical Comparison of Eight Alternative Methods for the Analysis of Paired Sample Data with Applications

This paper presents and statistically compared eight alternative methods that could possibly be used in the analysis of matched or paired sample data, including situations in which the data being analyzed satisfy the usual assumptions of normality and continuity necessary for the use of parametric tests as well as when the data are numeric and non-numeric measurements on as low as the ordinal scale. It is shown that only the modified sign tests based on only the raw observations or their assigned ranks may be used with non numeric measurement on the ordinal scale. If the ordinary sign test, the Wilcoxon signed rank sum test and the modified sign tests can be equally used in data analysis, then it is shown that the modified sign tests are more efficient and hence more powerful than the ordinary sign tests because the two test statistics are intrinsically and structurally modified for the possible presence of tied observations between the sampled populations for both using raw and simulated data. Of all the non-parametric methods presented, the modified Wilcoxon’s signed rank sum test when applicable is the most efficient and powerful, following in this order by the modified sign test by ranks and the modified sign test based on only raw scores for raw data but simulation, modified sign test by ranks is the most efficient and powerful, following in this order by modified wilcoxon’s signed rank sum test and modified sign test. Each of the non-parametric methods presented can be easily modified and re-specified for use with one sample data by simply re-designating the observations from one of the sampled populations to correspond with a hypothesized value of some measure of central tendency. The methods are illustrated with some raw data as well as simulated data and their relative performances compared.

Situational Diagnosis of the Social Sphere of Elders Living in Retirement Homes

A situational diagnosis of the social sphere of elder permanent residents at retirement homes in Chihuahua City was created with the aid of the Social Resource Scale instrument. From the 51 participants, there were 30 female and 21 male elders. The results and conclusions of the present study highlight two major needs: a systematic assessment of permanent residents in retirement homes and the implementation of a physical activation program. The proposed physical activation program must focus on both, the recovery of motor independence and the increase of socialization activities which allows members of the retired community to improve their daily routine performance and lessens the work load on their caretakers.

Preliminary Investigation of Formulated Herbal Ointment Demonstrates Amelioration of Excision Wound in Experimental Rabbit Model Compared with Silver Sulfadiazine

In light of the use of Lannea barteri in the management of diverse illnesses and treatment of wounds in traditional medicine, the current study was conducted to assess the wound-healing efficacy of crude aqueous extract of the stem bark of Lannea barteri and its shea butter formulated ointment using an excision wound model in the rabbit. The herbal ointment (5%, w/w) exhibited a significant wound healing activity, showing 99.9% ± 0.3% wound contraction at the end of the experiment (24th day). There was no significant difference (p > 0.05) between the 5% (w/w) herbal ointment compared with Silver Sulphadiazine cream (positive control), which showed a 97.8% ± 1.0% rate of excision wound contraction on day 24. Compared with the negative control group (administered with only shea butter), the wound healing activity of the ointment was significant (p Lannea barteri for the treatment of wounds and demonstrates that shea butter usage as a base in formulating an herbal ointment might aid in topical application for wound repair and regeneration, as well as the potential for enhanced wound healing.

Investigation of the Mechanical Properties of Flexible Polyether Foam Filled with Eggshell and Groundnut Husk Powder

The study investigated the effect of eggshell and groundnut husk as fillers on flexible polyether foam.The fillers with the particle sizes of 50μm each were mixed in the ratio of 50:50.Diverse percentages of the two combined fillers ranging from 10%,20%,30%,40%and 50%were incorporated into the polyether recipes in the appropriate foam formulations and foam samples were produced.The unfilled foam(0%filler)served as the standard control sample.The physico-mechanical test carried out on the foam showed increase in the properties such as density,compression set test,indentation hardness test,tensile strength test and decrease for elongation at break test as compared to the unfilled foam.The scanning electron microscopy result showed the cell sizes became smaller and concentrated with an irregular shape as the filler load increased,thereby making it denser and thicker.Eggshell and groundnut husk fillers may be used in the making of flexible polyether foam since these materials are organic in natures.They can improve the mechanical properties and biodegradability of polyurethane product.The utilization of these fillers in polymer composites productin will help in sanitizing the environment by reducing landfills and producing eco-friendly waste and also it influences cost positively.

Computational Dynamics of Stagnation Point Flow of Micropolar Fluid Past Vertical Porous Plates

This work examines the flow of a micropolar fluid over a vertical porous plate at the MHD stagnation point under viscous dissipation, convective boundary conditions, and thermal radiation. The governing partial differential equations and a set of similarity parameters were used to transform them into ordinary differential equations. The Runge-Kutta fourth-order algorithm is used in conjunction with the Newton Raphson shooting technique to numerically solve the generated self-similar equations. Results were tabulated both numerically and graphically, and examples for different controlling factors are quantitatively analyzed. According to the study, the vortex viscosity parameter (k) causes the velocity profiles to rise while the magnetic parameter, suction parameter, and radiation parameter cause them to fall. In contrast, as the flow’s suction and prandtl values rise, so do the magnetic parameter, radiation, and vortex viscosity, while the thickness of the thermal boundary layer decreases. .

A Comparative Evaluation of Test Coverage Techniques Effectiveness

Software systems have become complex and challenging to develop and maintain because of the large size of test cases with increased scalability issues. Test case prioritization methods have been successfully utilized in test case management. However, the prohibitively exorbitant cost of large test cases is now the mainstream in the software industry. The growth of agile test-driven development has increased the expectations for software quality. Yet, our knowledge of when to use various path testing criteria for cost-effectiveness is inadequate due to the inherent complexity in software testing. Existing researches attempted to address the issue without effectively tackling the scalability of large test suites to reduce time in regression testing. In order to provide a more accurate way of fault detection in software projects, we introduced novel coverage criteria, called Incremental Cluster-based test case Prioritization (ICP), and investigated its potentials by making a comparative evaluation with three un-clustered traditional coverage-based criteria: Prime-Path Coverage (PPC), Edge-Pair Coverage (EPC) and Edge Coverage (EC) based on mutation analysis. By clustering test suites, based on their dynamic run-time behavior, the number of pair-wise comparisons is reduced significantly. To compare, we analyzed 20 functions from 25 C programs, instrumented faults into the programs, and used the Mull mutation tool to generate mutants and perform a statistical analysis of the results. The experimental results show that ICP can lead to cost-effective improvements in fault detection.