This study evaluated the corrosion behavior of steel hooks embedded in GFRC,which were protected by a zinc-rich(96%Zn)galvanizing coating.The coating provided the hooks with active cathodic protection and a passive ph...This study evaluated the corrosion behavior of steel hooks embedded in GFRC,which were protected by a zinc-rich(96%Zn)galvanizing coating.The coating provided the hooks with active cathodic protection and a passive physical shield.Macrocell corrosion may form when the anode is smaller than the total steel surface.Thus,the steel hooks at the embedment juncture were additionally sealed against water ingress and air exchange using a construction sealant.The study was conducted in three phases in a salt-spray chamber.First,the electrogalvanized steel hooks embedded in GFRC were allowed to freely corrode for 7 days.In the second phase,the electrogalvanized steel hooks were painted with the zinc-rich coating and observed over 7 days.In the third phase,the steel hooks were protected by the zinc-rich coating together with a primer and construction sealant,and observed over 7 days.To evaluate the electrogalvanized hooks and the corrosion products formed,the thickness of the material was measured.Corrosion on the metal surface was inferred by studying the surface morphology of the hooks at various points of contact and after different periods of time.展开更多
基金Husnu Gerengi expresses his sincere thanks to The Scientific and Technological Research Council of Turkey(TUBITAK)for his fellowship at the University of Bergamo,under the TUBITAK 2219 Postdoctoral Research Program(Program Project Number:1059B191900111)The authors are grateful to ZİNGA®and Sikaflex®for providing zinc-rich coating and construction sealant.Also,the authors thank Kader Dikmen,VolkanÖzdal and Volkan Akmaz of Fibrobeton Company R&D Center for their help during the sample preparation process.One of the authors Marziya Rizvi would like to acknowledge CSIR,New Delhi,India,for providing her RA fellowship.A part of this research work was initially presented at the 2nd International Conference and Exhibition on Corrosion and Surface Protection for Steel(CASP 2022)on May 26,2022,Istanbul,Turkey.
文摘This study evaluated the corrosion behavior of steel hooks embedded in GFRC,which were protected by a zinc-rich(96%Zn)galvanizing coating.The coating provided the hooks with active cathodic protection and a passive physical shield.Macrocell corrosion may form when the anode is smaller than the total steel surface.Thus,the steel hooks at the embedment juncture were additionally sealed against water ingress and air exchange using a construction sealant.The study was conducted in three phases in a salt-spray chamber.First,the electrogalvanized steel hooks embedded in GFRC were allowed to freely corrode for 7 days.In the second phase,the electrogalvanized steel hooks were painted with the zinc-rich coating and observed over 7 days.In the third phase,the steel hooks were protected by the zinc-rich coating together with a primer and construction sealant,and observed over 7 days.To evaluate the electrogalvanized hooks and the corrosion products formed,the thickness of the material was measured.Corrosion on the metal surface was inferred by studying the surface morphology of the hooks at various points of contact and after different periods of time.
