A layered multifunctional framework based on polyacrylonitrile and MOF derivatives for stable lithium metal anode

Composite Li metal anodes based on three-dimensional(3D) porous frameworks have been considered as an effective material for achieving stable Li metal batteries with high energy density.However,uneven Li deposition behavior still occurs at the top of 3D frameworks owing to the local accumulation of Li ions.To promote uniform Li deposition without top dendrite growth,herein,a layered multifunctional framework based on oxidation-treated polyacrylonitrile(OPAN) and metal-organic framework(MOF) derivatives was proposed for rationally regulating the distribution of Li ions flux,nucleation sites,and electrical conductivity.Profiting from these merits,the OPAN/carbon nano fiber-MOF(CMOF) composite framework demonstrated a reversible Li plating/stripping behavior for 500 cycles with a stable Coulombic efficiency of around 99.0% at the current density of 2 mA/cm~2.Besides,such a Li composite anode exhibited a superior cycle lifespan of over 1300 h under a low polarized voltage of 18 mV in symmetrical cells.When the Li composite anode was paired with LiFePO_(4)(LFP) cathode,the obtained full cell exhibited a stable cycling over 500 cycles.Moreover,the COMSOL Multiphysics simulation was conducted to reveal the effects on homogeneous Li ions distribution derived from the above-mentioned OPAN/CMOF framework and electrical insulation/conduction design.These electrochemical and simulated results shed light on the difficulties of designing stable and safe Li metal anode via optimizing the 3D frameworks.

Oriented structural design of MXene electrodes for lithium sulfur catalysis

The lithium-sulfur reaction can contribute to the chemical electrical energy conversion capacity due to the multi-level ion/electron transfer process. However, the appearance of soluble intermediate products prevents efficient electron transfer, making it impossible to achieve stable cycling and capacity contribution. Restricted catalysis provides a solution for inhibiting the shuttle of soluble lithium polysulfides.Herein, MXene aerogel with optimized channel utilization is designed as S host according to the polysulfide control strategy of localization, adsorption, and catalysis. With the help of the results of oriented channels, the polysulfide conversion process is optimized, providing a comprehensive scheme for inhibiting the shuttle effect. Lithium sulfur catalytic batteries have achieved high capacity and stable cycling.This system provides a comprehensive solution for lithium sulfur reaction catalysis and a new perspective for the functional application of MXene based lithium sulfur batteries.

A Sub-Nanostructural Transformable Nanozyme for Tumor Photocatalytic Therapy

The structural change-mediated catalytic activity regulation plays a significant role in the biological functions of natural enzymes.However,there is virtually no artificial nanozyme reported that can achieve natural enzyme-like stringent spatiotemporal structure-based catalytic activity regulation.Here,we report a subnanostructural transformable gold@ceria(STGC-PEG)nanozyme that performs tunable catalytic activities via near-infrared(NIR)light-mediated sub-nanostructural transformation.The gold core in STGC-PEG can generate energetic hot electrons upon NIR irradiation,wherein an internal sub-nanostructural transformation is initiated by the conversion between CeO;and electron-rich state of CeO;-x,and active oxygen vacancies generation via the hot-electron injection.Interestingly,the sub-nanostructural transformation of STGC-PEG enhances peroxidase-like activity and unprecedentedly activates plasmon-promoted oxidase-like activity,allowing highly efficient low-power NIR light(50 m W cm;)-activated photocatalytic therapy of tumors.Our atomic-level design and fabrication provide a platform to precisely regulate the catalytic activities of nanozymes via a light-mediated sub-nanostructural transformation,approaching natural enzyme-like activity control in complex living systems.

Increased artemisinin production by promoting glandular secretory trichome formation and reconstructing the artemisinin biosynthetic pathway in Artemisia annua

Dear Editor,Artemisinin,which has potent antimalarial properties,is a sesquiterpene endoperoxide originally isolated from the traditional Chinese medicinal plant Artemisia annua.However,the artemisinin content in wild-type(WT)A.annua is low(1-10 mg/g dry weight),leading to its erratic supply and price fluctuations[1].

Phosphorus-doped lithium- and manganese-rich layered oxide cathode material for fast charging lithium-ion batteries

Owing to their high theoretical specific capacity and low cost, lithium- and manganese-rich layered oxide (LMR) cathode materials are receiving increasing attention for application in lithium-ion batteries. However, poor lithium ion and electron transport kinetics plus side effects of anion and cation redox reactions hamper power performance and stability of the LMRs. In this study, LMR Li_(1.2)Mn_(0.6)Ni_(0.2)O_(2) was modified by phosphorus (P)-doping to increase Li+ conductivity in the bulk material. This was achieved by increasing the interlayer spacing of the lithium layer, electron transport and structural stability, resulting in improvement of the rate and safety performance. P^(5+) doping increased the distance between the (003) crystal planes from ~0.474 nm to 0.488 nm and enhanced the structural stability by forming strong covalent bonds with oxygen atoms, resulting in an improved rate performance (capacity retention from 38% to 50% at 0.05 C to 5 C) and thermal stability (50% heat release compared with pristine material). First-principles calculations showed the P-doping makes the transfer of excited electrons from the valence band to conduction band easier and P can form a strong covalent bond helping to stabilize material structure. Furthermore, the solid-state electrolyte modified P5+ doped LMR showed an improved cycle performance for up to 200 cycles with capacity retention of 90.5% and enhanced initial coulombic efficiency from 68.5% (pristine) or 81.7% (P-doped LMR) to 88.7%.

Optimizing the morphology of all-polymer solar cells for enhanced photovoltaic performance and thermal stability

Due to the complicated film formation kinetics, morphology control remains a major challenge for the development of efficient and stable all-polymer solar cells(all-PSCs). To overcome this obstacle, the sequential deposition method is used to fabricate the photoactive layers of all-PSCs comprising a polymer donor PTzBI-oF and a polymer acceptor PS1. The film morphology can be manipulated by incorporating amounts of a dibenzyl ether additive into the PS1 layer. Detailed morphology investigations by grazing incidence wide-angle X-ray scattering and a transmission electron microscope reveal that the combination merits of sequential deposition and DBE additive can render favorable crystalline properties as well as phase separation for PTzBI-oF:PS1 blends. Consequently, the optimized all-PSCs delivered an enhanced power conversion efficiency(PCE) of 15.21%along with improved carrier extraction and suppressed charge recombination. More importantly, the optimized all-PSCs remain over 90% of their initial PCEs under continuous thermal stress at 65 °C for over 500 h. This work validates that control over microstructure morphology via a sequential deposition process is a promising strategy for fabricating highly efficient and stable all-PSCs.

AaWRKY17, a positive regulator of artemisinin biosynthesis, is involved in resistance to Pseudomonas syringae in Artemisia annua

Artemisia annua,a traditional Chinese medicinal plant,remains the only plant source for artemisinin production,yet few genes have been identified to be involved in both the response to biotic stresses,such as pathogens,and artemisinin biosynthesis.Here,we isolated and identified the WRKY transcription factor(TF)AaWRKY17,which could significantly increase the artemisinin content and resistance to Pseudomonas syringae in A.annua.Yeast one-hybrid(Y1H),dual-luciferase(dual-LUC),and electrophoretic mobility shift assay(EMSA)results showed that AaWRKY17 directly bound to the W-box motifs in the promoter region of the artemisinin biosynthetic pathway gene amorpha-4,11-diene synthase(ADS)and promoted its expression.Real-time quantitative PCR(RT-qPCR)analysis revealed that the transcript levels of two defense marker genes,Pathogenesis-Related 5(PR5)and NDR1/HIN1-LIKE 10(NHL10),were greatly increased in AaWRKY17-overexpressing transgenic A.annua plants.Additionally,overexpression of AaWRKY17 in A.annua resulted in decreased susceptibility to P.syringae.These results indicated that AaWRKY17 acted as a positive regulator in response to P.syringae infection.Together,our findings demonstrated that the novel WRKY transcription factor AaWRKY17 could potentially be used in transgenic breeding to improve the content of artemisinin and pathogen tolerance in A.annua.

Advances in regenerative medicine applications of tetrahedral framework nucleic acid-based nanomaterials: an expert consensus recommendation

With the emergence of DNA nanotechnology in the 1980s, self-assembled DNA nanostructures have attracted considerable attention worldwide due to their inherent biocompatibility, unsurpassed programmability, and versatile functions. Especially promising nanostructures are tetrahedral framework nucleic acids(t FNAs), first proposed by Turberfield with the use of a one-step annealing approach. Benefiting from their various merits, such as simple synthesis, high reproducibility, structural stability, cellular internalization, tissue permeability, and editable functionality, t FNAs have been widely applied in the biomedical field as threedimensional DNA nanomaterials. Surprisingly, t FNAs exhibit positive effects on cellular biological behaviors and tissue regeneration,which may be used to treat inflammatory and degenerative diseases. According to their intended application and carrying capacity,t FNAs could carry functional nucleic acids or therapeutic molecules through extended sequences, sticky-end hybridization,intercalation, and encapsulation based on the Watson and Crick principle. Additionally, dynamic t FNAs also have potential applications in controlled and targeted therapies. This review summarized the latest progress in pure/modified/dynamic t FNAs and demonstrated their regenerative medicine applications. These applications include promoting the regeneration of the bone,cartilage, nerve, skin, vasculature, or muscle and treating diseases such as bone defects, neurological disorders, joint-related inflammatory diseases, periodontitis, and immune diseases.

Self-Assembled Nanomicelles of Affibody-Drug Conjugate with Excellent Therapeutic Property to Cure Ovary and Breast Cancers

Affibody molecules are small nonimmunoglobulin affinity proteins,which can precisely target to some cancer cells with specific overexpressed molecular signatures.However,the relatively short in vivo half-life of them seriously limited their application in drug targeted delivery for cancer therapy.Here an amphiphilic affibody-drug conjugate is self-assembled into nanomicelles to prolong circulation time for targeted cancer therapy.As an example of the concept,the nanoagent was prepared through molecular self-assembly of the amphiphilic conjugate of Z_(HHR2:342)-Cys with auristatin E derivate,where the affibody used is capable of binding to the human epidermal growth factor receptor 2(HER2).Such a nanodrug not only increased the blood circulation time,but also enhanced the tumor targeting capacity(abundant affibody arms on the nanoagent surface) and the drug accumulation in tumor.As a result,this affibody-based nanoagent showed excellent antitumor activity in vivo to HER2-positive ovary and breast tumor models,which nearly eradicated both small solid tumors(about 100 mm^(3)) and large established tumors(exceed 500 mm^(3)).The relative tumor proliferation inhibition ratio reaches 99.8% for both models.

Revisiting the capacity-fading mechanism of P2-type sodium layered oxide cathode materials during high-voltage cycling

P2-type sodium layered oxide cathode (Na_(2/3)Ni_(1/3)Mn_(2/3)O_(2)P2-NNMO) has attracted great attention as a promising cathode material for sodium ion batteries because of its high specific capacity. However, this material suffers from a rapid capacity fade during high-voltage cycling. Several mechanisms have been proposed to explain the capacity fade, including intragranular fracture caused by the P2-O2 phase transion, surface structural change, and irreversible lattice oxygen release. Here we systematically investigated the morphological, structural, and chemical changes of P2-NNMO during high-voltage cycling using a variety of characterization techniques. It was found that the lattice distortion and crystal-plane buckling induced by the P2-O2 phase transition slowed down the Na-ion transport in the bulk and hindered the extraction of the Na ions. The sluggish kinetics was the main reason in reducing the accessible capacity while other interfacial degradation mechanisms played minor roles. Our results not only enabled a more complete understanding of the capacity-fading mechanism of P2-NNMO but also revealed the underlying correlations between lattice doping and the moderately improved cycle performance.

Synergistic stabilization of CsPbI_(3) inorganic perovskite via 1D capping and secondary growth

Cesium lead iodide(CsPbI_(3)) perovskite has gained great attention in the photovoltaic(PV) community because of its unique optoelectronic properties, good chemical stability and appropriate bandgap for sunlight harvesting applications. However, compared to solar cells fabricated from organic-inorganic hybrid perovskites, the commercialization of devices based on all-inorganic CsPbI_(3) perovskites still faces many challenges regarding PV performance and long-term stability. In this work, we discovered that tetrabutylammonium bromide(TBABr) post-treatment to CsPbI_(3) perovskite films could achieve synergistic stabilization with both TBA+cation intercalation and Br-doping. Such TBA^(+) cation intercalation leads to onedimensional capping with TBAPb I3 perovskite formed in situ, while the Br-induced crystal secondary growth helps effectively passivate the defects of CsPbI_(3) perovskite, thus enhancing the stability. In addition, the incorporation of TBABr can improve energy-level alignment and reduce interfacial charge recombination loss for better device performance. Finally, the highly stable TBABr-treated CsPbI_(3)-based perovskite solar cells show reproducible photovoltaic performance with a champion efficiency up to 19.04%, while retaining 90% of the initial efficiency after 500 h storage without encapsulation.

Fabrication of sulfur-doped cove-edged graphene nanoribbons on Au(111)

The on-surface synthesis from predesigned organic precursors can yield graphene nanoribbons(GNRs)with atomically precise widths,edge terminations and dopants,which facilitate the tunning of their electronic structures.Here,we report the synthesis of novel sulfur-doped cove-edged GNRs(S-CGNRs)on Au(111)from a specifically designed precursor containing thiophene rings.Scanning tunneling microscopy and non-contact atomic force microscopy measurements elucidate the formation of S-CGNRs through subsequent polymerization and cyclodehydrogenation,which further result in crosslinked branched structures.Scanning tunneling spectroscopy results reveal the conduction band minimum of the S-CGNR locates at 1.2 e V.First-principles calculations show that the S-CGNR possesses an energy bandgap of 1.17 e V,which is evidently smaller than that of an undoped cove-edged GNR(1.7 e V),suggesting effective tuning of the bandgap by introducing sulfur atoms.Further increasing the coverage of precursors close to a monolayer results in the formation of linear-shaped S-CGNRs.The fabrication of S-CGNRs provides one more candidate in the GNR toolbox and promotes the future applications of heteroatom-doped graphene nanostructures.

Water-Driven Malleable,Weldable and Eco-Friendly Recyclable Carbon Fiber Reinforced Dynamic Composites

Traditional carbon fiber-reinforced polymers based on thermoset matrix have been extensively used in the fields of wind turbine blades,automotive sector,and aerospace,among many others.However,there is still a major challenge of recycling those polymers due to the high cost and adverse impacts on the environment.In this work,we apply a polyimine network as matrix,which possess considerable tensile and thermal properties,to prepare the carbon fiber reinforced polyimine materials with trifluoromethyl diphenoxybenzene units(CFRFP)using a prepreg-based compression molding method.The CFRFP can be reshaped or reprocessed by heat or with water rapidly,and exhibited multifunction,including welding,chemical recycling,etc.These unique findings gained from our study will facilitate the manufacturing capability and enrich the types of fiber-reinforced composites.

Recent advancements and perspectives of fast-charging composite anodes for lithium-ion batteries

The escalating demand for fast-charging lithium-ion batteries(LIBs)has mirrored the rapid proliferation and widespread adoption of electric vehicles and portable electronic devices.Nonetheless,the sluggish diffusion kinetics of lithium ions and electrode degradation in conventional graphite-based anodes pose formidable hurdles in achieving optimal fast-charging capabilities for LIBs.To overcome these challenges,the innovative concept of fast-charging composite anodes,a paradigm shift from traditional single-component designs,has emerged as a promising avenue to enhance the overall performance of LIBs under rapid charging conditions.This paper provides a comprehensive review of the recent advancements in fast-charging composite anodes for LIBs,with a pivotal emphasis on the design principles and material selection strategies employed in various composite anode formulations.Furthermore,it outlines the future prospects and research trajectories in this burgeoning field,offering insights into potential breakthroughs and directions for further exploration.

Metal nanoparticles for cancer therapy:Precision targeting of DNA damage

Cancer,a complex and heterogeneous disease,arises from genomic instability.Currently,DNA damage-based cancer treatments,including radiotherapy and chemotherapy,are employed in clinical practice.However,the efficacy and safety of these therapies are constrained by various factors,limiting their ability to meet current clinical demands.Metal nanoparticles present promising avenues for enhancing each critical aspect of DNA damage-based cancer therapy.Their customizable physicochemical properties enable the development of targeted and personalized treatment platforms.In this review,we delve into the design principles and optimization strategies of metal nanoparticles.We shed light on the limitations of DNA damage-based therapy while highlighting the diverse strategies made possible by metal nanoparticles.These encompass targeted drug delivery,inhibition of DNA repair mechanisms,induction of cell death,and the cascading immune response.Moreover,we explore the pivotal role of physicochemical factors such as nanoparticle size,stimuli-responsiveness,and surface modification in shaping metal nanoparticle platforms.Finally,we present insights into the challenges and future directions of metal nanoparticles in advancing DNA damage-based cancer therapy,paving the way for novel treatment paradigms.

EGFR-targeted and gemcitabine-incorporated chemogene for combinatorial pancreatic cancer treatment

Pancreatic cancer stands out as a recognized intractable tumor due to its high malignancy and mortality rates,which are largely attributed to the insensitivity of current clinical chemotherapies or multidrug-resistance.Combinatorial chemo and gene therapy that integrates different therapeutic targets,may increase the chemosensitivity of pancreatic cancer and synergistically enhance the antitumor efficacy.However,conventional co-delivery of gene and chemo drugs is intensively dependent on complex nanoparticle delivery systems,thus would be limited by unstable drug packaging,nonspecific biodistribution,and biosafety problem.Herein,we rationally designed an epidermal growth factor-receptor(EGFR)-targeted and gemcitabine-incorporated oligonucleotide(termed as chemogene)with anti-Bcl-2 sequence,which achieves simple and precise integration of gemcitabine into a gene regulative agent,as well as the EGFR-targeted delivery for pancreatic cancer therapy.Through solid-phase synthesis,gemcitabine,as the first-line chemodrug for pancreatic cancer,is introduced to the antisense oligonucleotide to replace all cytosine nucleosides to obtain the gemcitabine-integrated chemogene(Ge-ASO^(Bcl-2)).Thereafter,Ge-ASO^(Bcl-2)is covalently coupled with EGFR nanobody to construct the final targeted chemogene without any exogenous carriers.Notably,this nanobody-conjugated chemogene exhibits remarkable tumor targeting capability and antitumor effects both in vitro and in vivo,which initiates a first step toward the application of combinatorial chemo and gene therapy for future pancreatic cancer treatment.

Photothermal-chemical synthesis of P-S-H ternary hydride at high pressures

The recent discovery of room temperature superconductivity(283 K)in carbonaceous sulfur hydride(C-S-H)has attracted much interest in ternary hydrogen rich materials.In this report,ternary hydride P-S-H was synthesized through a photothermal-chemical reaction from elemental sulfur(S),phosphorus(P)and molecular hydrogen(H_(2))at high pressures and room temperature.Raman spectroscopy under pressure shows that H_(2)S and PH_(3) compounds are synthesized after laser heating at 0.9 GPa,and a ternary van der Waals compound P-S-H is synthesized with further compression to 4.6 GPa.The P-S-H compound is probably a mixed alloy of PH_(3) and(H_(2)S)_(2)H_(2) with a guest-host structure similar to the C-S-H system.The ternary hydride can persist up to 35.6 GPa at least and shows two phase transitions at approximately 23.6 GPa and 32.8 GPa,respectively.

Recent Progress in Large-Area Perovskite Photovoltaic Modules

Perovskite solar cells(PSCs)have undergone a dramatic increase in laboratory-scale effi ciency to more than 25%,which is comparable to Si-based single-junction solar cell effi ciency.However,the effi ciency of PSCs drops from laboratory-scale to large-scale perovskite solar modules(PSMs)because of the poor quality of perovskite fi lms,and the increased resistance of large-area PSMs obstructs practical PSC applications.An in-depth understanding of the fabricating processes is vital for precisely controlling the quality of large-area perovskite fi lms,and a suitable structural design for PSMs plays an impor-tant role in minimizing energy loss.In this review,we discuss several solution-based deposition techniques for large-area perovskite fi lms and the eff ects of operating conditions on the fi lms.Furthermore,diff erent structural designs for PSMs are presented,including the processing technologies and device architectures.

CO_(2)electrolysis:Advances and challenges in electrocatalyst engineering and reactor design

Electrochemical reduction of CO_(2)(CO_(2)RR)coupled with renewable electrical energy is an attractive way of upgrading CO_(2)to value-added chemicals and closing the carbon cycle.However,CO_(2)RR electrocatalysts still suffer from high overpotential,and the complex reaction pathways of CO_(2)RR often lead to mixed products.Early research focuses on tuning the binding of reaction intermediates on electrocatalysts,and recent efforts have revealed that the design of electrolysis reactors is equally important for efficient and selective CO_(2)RR.In this review,we present an overview of recent advances and challenges toward achieving high activity and high selectivity in CO_(2)RR at ambient conditions,with a particular focus on the progress of CO_(2)RR electrocatalyst engineering and reactor design.Our discussion begins with three types of electrocatalysts for CO_(2)RR(noble metalbased,none-noble metal-based,and metal-free electrocatalysts),and then we examine systems-level strategies toward engineering specific components of the electrolyzer,including gas diffusion electrodes,electrolytes,and polymer electrolyte membranes.We close with future perspectives on catalyst development,in-situ/operando characterization,and electrolyzer performance evaluation in CO_(2)RR studies.

Hydrogen-rich surface of MoC catalysts for efficient CO_(2) hydrogenation induced by a coupled hydrogen donator

Direct CO_(2) hydrogenation offers an important strategy for promoting the global carbon balance,but high thermodynamic and kinetic stability of CO_(2) has restricted its applicability to only a handful of industrial sectors.Here,we introduce a proof-of-concept application of the electron-rich Pt surface to promote hydrogen donation for electron-rich MoC particles acting as hydrogen acceptors,thereby constructing hydrogen-rich surface of MoC active centers.Moreover,the formed hydrogen-rich and electronrich surface could greatly decrease reaction activation energy to boost the efficient CO_(2) hydrogenation into formic acid over the MoC centers.The optimized MoC@NC/Pt-0.1(NC:nitrogen-doped carbon)catalyst exhibits a high turnover frequency(TOF)value of 1.2 h^(−1) at a lower temperature of 60℃and a TOF of 24.2 h^(−1) under standard reaction conditions widely used in the literature,exceeding 7 times of MoC@NC catalyst and surpassing the benchmark classical non-noble metal active center-based heterogeneous catalyst.