In the present work,the solidification behaviors and microhardness of directionally solidified AlCoCrFeNi_(2.1) eutectic highentropy alloy(EHEA)obtained at different growth velocities are investigated.The microstructu...In the present work,the solidification behaviors and microhardness of directionally solidified AlCoCrFeNi_(2.1) eutectic highentropy alloy(EHEA)obtained at different growth velocities are investigated.The microstructure of the as-cast AlCoCrFeNi_(2.1) EHEA is composed of bulky dendrites(NiAl phase)and lamellar eutectic structures,indicating that the actual composition of the alloy slightly deviates from the eutectic point.However,it is interesting to observe that the full lamellar structure of this alloy is obtained through directional solidification.In order to explain this phenomenon,the maximum interface temperature criterion and the interface response function(IRF)theory are applied to calculate the velocity range of the transition from the primary phase to the eutectic,which is 1.2–2×10^(4)μm/s.Furthermore,microhardness is one of the important parameters to measure the mechanical properties of materials.Therefore,the microhardness test is performed,and the test result indicates that the microhardness(HV)increased with increasing growth velocity(V)or decreased with increasing lamellar spacing(λ).The dependences ofλand HV on V are determined by using a linear regression analysis.The relationships between theλ,V and HV are given as:λ=11.62V^(-0.48),HV=305.5V 0.02 and HV=328.1λ^(0.04),respectively.The microhardness of the AlCoCrFeNi_(2.1) EHEA increases from 312.38 HV to 329.54 HV with the increase in growth velocity(5–200μm/s).Thus,directional solidification is an effective method to improve the mechanical properties of alloys.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant No.51871118)the Basic Scientific Research Business Expenses of the Central University and Open Project of Key Laboratory for Magnetism and Magnetic Materials of the Ministry of Education,Lanzhou University(Grant No.LZUMMM2021005)+1 种基金the Science and Technology Project of Lanzhou City(Grant No.2019-1-30)the State Key Laboratory of Special Rare Metal Materials(Grant No.SKL2020K003)。
文摘In the present work,the solidification behaviors and microhardness of directionally solidified AlCoCrFeNi_(2.1) eutectic highentropy alloy(EHEA)obtained at different growth velocities are investigated.The microstructure of the as-cast AlCoCrFeNi_(2.1) EHEA is composed of bulky dendrites(NiAl phase)and lamellar eutectic structures,indicating that the actual composition of the alloy slightly deviates from the eutectic point.However,it is interesting to observe that the full lamellar structure of this alloy is obtained through directional solidification.In order to explain this phenomenon,the maximum interface temperature criterion and the interface response function(IRF)theory are applied to calculate the velocity range of the transition from the primary phase to the eutectic,which is 1.2–2×10^(4)μm/s.Furthermore,microhardness is one of the important parameters to measure the mechanical properties of materials.Therefore,the microhardness test is performed,and the test result indicates that the microhardness(HV)increased with increasing growth velocity(V)or decreased with increasing lamellar spacing(λ).The dependences ofλand HV on V are determined by using a linear regression analysis.The relationships between theλ,V and HV are given as:λ=11.62V^(-0.48),HV=305.5V 0.02 and HV=328.1λ^(0.04),respectively.The microhardness of the AlCoCrFeNi_(2.1) EHEA increases from 312.38 HV to 329.54 HV with the increase in growth velocity(5–200μm/s).Thus,directional solidification is an effective method to improve the mechanical properties of alloys.
