In order to remove hexahydro-1,3,5-trinitro-1,3,5-triazine(RDX),the main impurity,in process of polymorphic transformation of octrahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine(HMX),the solubility ofβ-HMX and RDX in a...In order to remove hexahydro-1,3,5-trinitro-1,3,5-triazine(RDX),the main impurity,in process of polymorphic transformation of octrahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine(HMX),the solubility ofβ-HMX and RDX in acetonitrile(ACN)+water in the temperature range of 288.15-333.15 K and in nitric acid(HNO_(3))+water in the temperature range of 298.15-333.15 K were measured by laser dynamic method.The results showed that the solubility of bothβ-HMX and RDX in binary mixed solvents increased monotonously as the temperature increase at a given solvent composition or with increasing of mole fraction of solvent(ACN and nitric acid).Solubility data were well correlated by the modified Apelblat equation,Jouyban-Acree model,Yaws equation and van't Hoff equation,and the Yaws equation achieved the best fitting results according to the relative error and the mean square error root.Furthermore,the solubility ofβ-HMX and RDX in binary mixed solvent was compared,based on the solubility difference and the solvent's own properties,the best separation degree ofβ-HMX and RDX was found when the mole fraction of nitric acid was 0.22 at room temperature,which provided data support for HMX crystallization in mixed solvent.The solubility differences between RDX andβ-HMX in mixed solvents were explained from the formation of intermolecular and intramolecular hydrogen bonds.展开更多
The solubility of 2,3,4-trichloro-1,5-dinitrobenzene(TCDNB) was measured by a laser dynamic method over the temperature range from 278.15 K to 323.15 K under 0.1 MPa in fifteen mono-solvents(methanol,ethanol,isopropan...The solubility of 2,3,4-trichloro-1,5-dinitrobenzene(TCDNB) was measured by a laser dynamic method over the temperature range from 278.15 K to 323.15 K under 0.1 MPa in fifteen mono-solvents(methanol,ethanol,isopropanol,n-butanol,toluene,dichloromethane,chloroform,tetrachloromethane,1,2-dichloroethane,acetone,ethyl acetate,acetonitrile,N-methylpyrrolidone(NMP),N,Ndimethylformamide dimethyl sulfoxide(DMF),dimethyl sulfoxide(DMSO).The solubility of TCDNB could be increased with increasing temperature in fifteen mono-solvents.TCDNB solubility is in the following order at 298.15 K:NMP>DMF>DMSO>toluene>acetone>ethyl acetate>dichloromethane>1,2-dich loroethane>chloroform>acetonitrile>tetrachloromethane>methanol>ethanol>n-butanol>isopropanol.The KAT-LSER model was used to investigate the solvent effect,which revealed that the hydrogen bond acidity of solvents has a greater effect on TCDNB solubility.The van't Hoff model,the modified Apelblat model,theλh model,and the non-random two liquid(NRTL)model were used to correlate the solubility of TCDNB.The calculated solubility data agreed well with the experimental data,and the modified Apelblat model fit best.Furthermore,the van't Hoff and Gibbs equations were also used to calculate the dissolution thermodynamic properties of TCDNB in various solvents.TCDNB dissolution could be an enthalpy-driven,non-spontaneous,and endothermic process in fifteen mono-solvents.The determination and fitting solubility of TCDNB,as well as the calculation of its thermodynamic properties,would be critical in the purification and crystallization of its preparation process research.展开更多
2,4(5)-Dinitroimidazole(2,4(5)-DNI)is an important organic intermediate,and itself can also be used for energetic material.In this work,the solubility of 2,4(5)-DNI in(methanol+water,acetonitrile+water,acetone+water)b...2,4(5)-Dinitroimidazole(2,4(5)-DNI)is an important organic intermediate,and itself can also be used for energetic material.In this work,the solubility of 2,4(5)-DNI in(methanol+water,acetonitrile+water,acetone+water)binary solvents were measured by using a dynamic test method from 278.15 K to 323.15 K under 101.1 k Pa.The Jouyban–Acree model,van't Hoff–Jouyban–Acree model,Apelblat–Jouyb an–Acree model,Ma model,and Sun model were used to correlate the experimental data.The values of relative average deviation(RAD)and root-mean-square deviation(RMSD)were very small,indicating that the error between the experimental value and the correlated value was very small.The thermodynamic parameters such as dissolution enthalpy,dissolution entropy and Gibbs energy were calculated based on solubility data.High-purity of 2,4(5)-DNI was efficiently obtained by using cooling and dilution crystallization method.展开更多
Important crystal faces that dominate the crystal morphology of royal demolition explosive (RDX) in vacuum were analyzed with the attachment energy (AE) method. Molecular dynamics (MD) simulations were used to c...Important crystal faces that dominate the crystal morphology of royal demolition explosive (RDX) in vacuum were analyzed with the attachment energy (AE) method. Molecular dynamics (MD) simulations were used to calculate the interaction energies between these crystal faces and different solvent molecules for an attachment energy correction. Growth habits in the presence of different solvents were generated. The results showed that some crystal faces in solutions became morphologically more important than that in vacuum while others became less important. Thus, crystal shape and surface property changed a lot with the variation of crystal faces. The results from calcula- tion were in agreement with those from the re-crystallization experiment, which indicated that cyclohexanone (CH) was a promising solvent to modify the crystal morphology of RDX for obtaining products with regular shape and high purity, while butyrolactone (BL) played a great role in improving the surface electrostatic property of RDX.展开更多
In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based meltcast explosives were comparatively studied through accelerating rate calorimeter(ARC) and Cook-off experiments. Two k...In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based meltcast explosives were comparatively studied through accelerating rate calorimeter(ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions(HWS mode) and constant heating(CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cookoff experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.展开更多
To achieve aluminum particles with ultrafine granularity and high reactivity,the mechanical ball-milling method was adopted and three kinds of coatings,including stearic acid(SA),viton and dinitrotoluene(DNT),were add...To achieve aluminum particles with ultrafine granularity and high reactivity,the mechanical ball-milling method was adopted and three kinds of coatings,including stearic acid(SA),viton and dinitrotoluene(DNT),were added.The effects of milling time and different coatings on granularity and reactivity of ultrafine aluminum particles were studied.The structures of prepared ultrafine aluminum were characterized by scanning electron microscopy,X-ray particle diffraction and the thermal properties were analyzed by TG/DSC.Besides,the reactivity of prepared ultrafine aluminum particles was comprehensively analyzed and judged according to several thermodynamic parameters,the maximal oxidation rate,the oxidation degree of aluminum and the enthalpy change.The results revealed that aluminum particles prepared by the mechanical ball milling method were all flake-like and the particle sizes were below5 mm with nanometer-scale thickness.And the crystal form of aluminum was found to be unchanged.Besides,the ultrafine flake aluminum coated with stearic acid after milling for 5 h showed the highest reactivity with 56.1% of oxidation degree before 660℃,0.945 mg/℃ of maximal oxidation rate and 20491 J/g of enthalpy change.展开更多
2,4(5)-Dinitroimidazole(2,4(5)-DNI) is an important energetic material, and it is also an important precursor for the preparation of drugs and energetic materials. In this study, the solubility of 2,4(5)-DNI in eleven...2,4(5)-Dinitroimidazole(2,4(5)-DNI) is an important energetic material, and it is also an important precursor for the preparation of drugs and energetic materials. In this study, the solubility of 2,4(5)-DNI in eleven pure solvents(chlorobenzene, benzene, 1,2-dichloroethane, toluene, water, isopropyl alcohol,ethyl acetate, acetonitrile, methanol, 1,4-dioxane and acetone) were measured by using a dynamic test method from 278.15 K to 323.15 K under 101.1 kPa. Four solubility models were used to fit the experimental data, which were ideal model, modified Apelblat equation, polynomial empirical equation, and λh equation. Meanwhile, the relative average deviation and root-mean-square deviation between the experimental data and the fitted data were also calculated. Furthermore, the three thermodynamic parameters,i.e., dissolution enthalpy, dissolution entropy and Gibbs energy were obtained based on solubility data.Finally, the crude product of 2,4(5)-DNI was crystallized with acetone as solvent, and the purity of the crystalline product was greater than 99.5%.展开更多
Some nitro-substituted triazole-furazan derivatives are considered as potential candidates for high energy density compounds through quantum chemical treatment. Their geometric and electronic structures,band gap,therm...Some nitro-substituted triazole-furazan derivatives are considered as potential candidates for high energy density compounds through quantum chemical treatment. Their geometric and electronic structures,band gap,thermodynamic properties and detonation properties were studied using the density functional theory at the B3 LYP /6- 311 + G**level. The calculated energy of explosion,density,and detonation properties of model compounds were comparable to 1,3,5-trinitro-1,3,5-triazinane( RDX) and 1,3,5,7-tetranitro-1,3,5,7-tetrazocane( HMX). The heats of formation and bond dissociation energy were also analysed to understand the nature of thermal stabilities and the trigger bond in the pyrolysis process.展开更多
文摘In order to remove hexahydro-1,3,5-trinitro-1,3,5-triazine(RDX),the main impurity,in process of polymorphic transformation of octrahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine(HMX),the solubility ofβ-HMX and RDX in acetonitrile(ACN)+water in the temperature range of 288.15-333.15 K and in nitric acid(HNO_(3))+water in the temperature range of 298.15-333.15 K were measured by laser dynamic method.The results showed that the solubility of bothβ-HMX and RDX in binary mixed solvents increased monotonously as the temperature increase at a given solvent composition or with increasing of mole fraction of solvent(ACN and nitric acid).Solubility data were well correlated by the modified Apelblat equation,Jouyban-Acree model,Yaws equation and van't Hoff equation,and the Yaws equation achieved the best fitting results according to the relative error and the mean square error root.Furthermore,the solubility ofβ-HMX and RDX in binary mixed solvent was compared,based on the solubility difference and the solvent's own properties,the best separation degree ofβ-HMX and RDX was found when the mole fraction of nitric acid was 0.22 at room temperature,which provided data support for HMX crystallization in mixed solvent.The solubility differences between RDX andβ-HMX in mixed solvents were explained from the formation of intermolecular and intramolecular hydrogen bonds.
文摘The solubility of 2,3,4-trichloro-1,5-dinitrobenzene(TCDNB) was measured by a laser dynamic method over the temperature range from 278.15 K to 323.15 K under 0.1 MPa in fifteen mono-solvents(methanol,ethanol,isopropanol,n-butanol,toluene,dichloromethane,chloroform,tetrachloromethane,1,2-dichloroethane,acetone,ethyl acetate,acetonitrile,N-methylpyrrolidone(NMP),N,Ndimethylformamide dimethyl sulfoxide(DMF),dimethyl sulfoxide(DMSO).The solubility of TCDNB could be increased with increasing temperature in fifteen mono-solvents.TCDNB solubility is in the following order at 298.15 K:NMP>DMF>DMSO>toluene>acetone>ethyl acetate>dichloromethane>1,2-dich loroethane>chloroform>acetonitrile>tetrachloromethane>methanol>ethanol>n-butanol>isopropanol.The KAT-LSER model was used to investigate the solvent effect,which revealed that the hydrogen bond acidity of solvents has a greater effect on TCDNB solubility.The van't Hoff model,the modified Apelblat model,theλh model,and the non-random two liquid(NRTL)model were used to correlate the solubility of TCDNB.The calculated solubility data agreed well with the experimental data,and the modified Apelblat model fit best.Furthermore,the van't Hoff and Gibbs equations were also used to calculate the dissolution thermodynamic properties of TCDNB in various solvents.TCDNB dissolution could be an enthalpy-driven,non-spontaneous,and endothermic process in fifteen mono-solvents.The determination and fitting solubility of TCDNB,as well as the calculation of its thermodynamic properties,would be critical in the purification and crystallization of its preparation process research.
文摘2,4(5)-Dinitroimidazole(2,4(5)-DNI)is an important organic intermediate,and itself can also be used for energetic material.In this work,the solubility of 2,4(5)-DNI in(methanol+water,acetonitrile+water,acetone+water)binary solvents were measured by using a dynamic test method from 278.15 K to 323.15 K under 101.1 k Pa.The Jouyban–Acree model,van't Hoff–Jouyban–Acree model,Apelblat–Jouyb an–Acree model,Ma model,and Sun model were used to correlate the experimental data.The values of relative average deviation(RAD)and root-mean-square deviation(RMSD)were very small,indicating that the error between the experimental value and the correlated value was very small.The thermodynamic parameters such as dissolution enthalpy,dissolution entropy and Gibbs energy were calculated based on solubility data.High-purity of 2,4(5)-DNI was efficiently obtained by using cooling and dilution crystallization method.
文摘Important crystal faces that dominate the crystal morphology of royal demolition explosive (RDX) in vacuum were analyzed with the attachment energy (AE) method. Molecular dynamics (MD) simulations were used to calculate the interaction energies between these crystal faces and different solvent molecules for an attachment energy correction. Growth habits in the presence of different solvents were generated. The results showed that some crystal faces in solutions became morphologically more important than that in vacuum while others became less important. Thus, crystal shape and surface property changed a lot with the variation of crystal faces. The results from calcula- tion were in agreement with those from the re-crystallization experiment, which indicated that cyclohexanone (CH) was a promising solvent to modify the crystal morphology of RDX for obtaining products with regular shape and high purity, while butyrolactone (BL) played a great role in improving the surface electrostatic property of RDX.
基金the National Defense Foundation of China (3090021322001, 3090020221912, 3090021211903.) for financial support of this work。
文摘In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based meltcast explosives were comparatively studied through accelerating rate calorimeter(ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions(HWS mode) and constant heating(CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cookoff experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.
基金supported by the Natural Science Foundation of China (Project No51606102)the Fundamental Research Funds for the Central Universities (No. 30916011315)+3 种基金the Qing Lan Project, the Weapon Research Support Fund (No. 62201070827)a Project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe Shanghai Aerospace Science and Technology Innovation Fund (SAST2015020)Basic Product Innovation Technology Research Project of Explosives
文摘To achieve aluminum particles with ultrafine granularity and high reactivity,the mechanical ball-milling method was adopted and three kinds of coatings,including stearic acid(SA),viton and dinitrotoluene(DNT),were added.The effects of milling time and different coatings on granularity and reactivity of ultrafine aluminum particles were studied.The structures of prepared ultrafine aluminum were characterized by scanning electron microscopy,X-ray particle diffraction and the thermal properties were analyzed by TG/DSC.Besides,the reactivity of prepared ultrafine aluminum particles was comprehensively analyzed and judged according to several thermodynamic parameters,the maximal oxidation rate,the oxidation degree of aluminum and the enthalpy change.The results revealed that aluminum particles prepared by the mechanical ball milling method were all flake-like and the particle sizes were below5 mm with nanometer-scale thickness.And the crystal form of aluminum was found to be unchanged.Besides,the ultrafine flake aluminum coated with stearic acid after milling for 5 h showed the highest reactivity with 56.1% of oxidation degree before 660℃,0.945 mg/℃ of maximal oxidation rate and 20491 J/g of enthalpy change.
文摘2,4(5)-Dinitroimidazole(2,4(5)-DNI) is an important energetic material, and it is also an important precursor for the preparation of drugs and energetic materials. In this study, the solubility of 2,4(5)-DNI in eleven pure solvents(chlorobenzene, benzene, 1,2-dichloroethane, toluene, water, isopropyl alcohol,ethyl acetate, acetonitrile, methanol, 1,4-dioxane and acetone) were measured by using a dynamic test method from 278.15 K to 323.15 K under 101.1 kPa. Four solubility models were used to fit the experimental data, which were ideal model, modified Apelblat equation, polynomial empirical equation, and λh equation. Meanwhile, the relative average deviation and root-mean-square deviation between the experimental data and the fitted data were also calculated. Furthermore, the three thermodynamic parameters,i.e., dissolution enthalpy, dissolution entropy and Gibbs energy were obtained based on solubility data.Finally, the crude product of 2,4(5)-DNI was crystallized with acetone as solvent, and the purity of the crystalline product was greater than 99.5%.
文摘Some nitro-substituted triazole-furazan derivatives are considered as potential candidates for high energy density compounds through quantum chemical treatment. Their geometric and electronic structures,band gap,thermodynamic properties and detonation properties were studied using the density functional theory at the B3 LYP /6- 311 + G**level. The calculated energy of explosion,density,and detonation properties of model compounds were comparable to 1,3,5-trinitro-1,3,5-triazinane( RDX) and 1,3,5,7-tetranitro-1,3,5,7-tetrazocane( HMX). The heats of formation and bond dissociation energy were also analysed to understand the nature of thermal stabilities and the trigger bond in the pyrolysis process.