赋玻璃予生命 Glass MaDe

＂在玻璃学校我发现了玻璃能够给出的无穷的可能性,因而我想研发、创作一系列时尚又实用的产品。这个研发的过程使我成为了一名玻璃设计师和制造者。——丹尼斯·佰德瑞拉＂意大利玻璃工作室GLASS MADE由玛雅拉普（MAYA LAPP）和丹尼斯佰德瑞拉（DENIS PERERA）两个年轻且充满创意精神的年轻人创立。＂MADE＂一次一语双关,不仅代表了＂制作＂,还是二人名字缩写的组合。

Influence of Al_(2)O_(3)/SiO_(2) Ratio on the Structure and Properties of Na^(+)/K^(+)Ion Exchange Na_(2)O-MgO-Al_(2)O_(3)-SiO_(2) Glasses

In this work,the structure,viscosity and ion-exchange process of Na_(2)O-MgO-Al_(2)O_(3)-SiO_(2) glasses with different Al_(2)O_(3)/SiO_(2) molar ratios were investigated.The results showed that,with increasing Al_(2)O_(3)/SiO_(2) ratio,the simple structural units Q_(1) and Q_(2) transformed into highly aggregated structural units Q_(3) and Q_(4),indicating the increase of polymerization degree of glass network.Meanwhile,the coefficient of thermal expansion decreased from 9.23×10^(-6)℃^(-1) to 8.88×10^(-6)℃^(-1).The characteristic temperatures such as melting,forming,softening and glass transition temperatures increased with the increase of Al_(2)O_(3)/SiO_(2) ratio,while the glasses working temperature range became narrow.The increasing Al_(2)O_(3)/SiO_(2) ratio and prolonging ion-exchange time enhanced the surface compressive stress(CS)and depth of stress layer(DOL).However,the increase of ion exchange temperature increased the DOL and decreased the CS affected by stress relaxation.There was a good linear relationship between stress relaxation and surface compressive stress.Chemical strengthening significantly improved the hardness of glasses,which reached the maximum value of(622.1±10)MPa for sample with Al_(2)O_(3)/SiO_(2) ratio of 0.27 after heat treated at 410℃for 2 h.

Preparation, Crystallization and Mechanical Properties of Potassium Aluminosilicate Glass-ceramics

In this study,transparent K_(2)O-Al_(2)O_(3)-SiO_(2)(KAS)glass-ceramics with leucite as the main crystalline phase were prepared by melting-quench method and two-step heat treatment.The effects of SiO_(2)/Al_(2)O_(3) ratio and heat treatment on crystallization and mechanical properties were studied.The crystallization kinetics and X-Ray Diffraction(XRD)results showed that SiO_(2)/Al_(2)O_(3) ratio and heat treatment system had a direct impact on the crystallization behavior of potassium aluminosilicate glass-ceramics.When heat-treated at 680℃/2 h and 780℃/1 h,cracks generated on the surface of the sample with the addition of SiO_(2)/Al_(2)O_(3)=4.8(in mol)due to the huge difference in the coefficient of thermal expansion between glass matrix and surface.When the addition of SiO_(2)/Al_(2)O_(3)(in mol)was 4,the sample with leucite as the main crystalline phase showed an excellent fracture toughness(1.46 MPa·m^(0.5))after the heat treatment of 680℃/2 h and 780℃/5 h.And there was a phase transformation from kaliophilite to leucite.The crystalline phases of the sample heat-treated at 680℃/8 h and 780℃/1 h were leucite and kaliophilite,which resulted in the visible light transmittance of 63%and the fracture toughness of 0.91 MPa·m^(0.5).Furthermore,after the heat treatment of 680℃/2 h and 780℃/5 h,the main crystalline phase of the sample with SiO_(2)/Al_(2)O_(3)=3.2(in mol)was still kaliophilite.Because leucite only grows on the surface of the sample and is hard to grow inward,it is hard to achieve the bulk crystallization of leucite in the sample with SiO_(2)/Al_(2)O_(3)=3.2(in mol).

Preparation and Characterization of ZnO-CuO-Bi_(2)O_(3)-B_(2)O_(3)-SiO_(2)System Low Melting Sealing Glasses

Lead-free low melting glasses,ZnO-CuO-Bi_(2)O_(3)-B_(2)O_(3)-SiO_(2)system,with fixed contents of 15 mol%CuO and 20 mol%Bi_(2)O_(3),were prepared by using melt cooling method.Structure and thermal properties of the glasses were studied by using X-ray diffractometer(XRD),infrared spectrometer(FIT-IR),thermal dilatometer and differential thermal analyzer(DTA).Chemical durability of the glasses was studied by using dissolution rate method.Wettability of glasses on substrate was tested by using button sintering experiment.It is found that alkaline resistance of the glass solders is lower than that of plate glass and the water resistance is comparable with that of plate glass.The sealing temperatures are Ts=445-490℃,while the average thermal expansion coefficient from room temperature to 300℃is in the range of(65-82)×10^(−7)℃^(−1).At sealing temperature,the glass solders have good wettability on plate glass or alumina substrate.They are not crystallized even sintered at the sealing temperature for 30 min.The solder glasses are suitable for sealing plate glass,alumina and other inorganic non-metallic materials.

Glass-Ceramics with High Strength and High Transmittance Obtained by Multi-Factor Controlling

The presence of Li_(2)Si_(2)O_(5) and LiAlSi_(4)O_(10) could effectively improve the elastic modulus and transmittance of lithium disilicate(LD)glass-ceramics.Through synergistically modulation of the crystal content and grain size,we obtained high strength and high transmittance of LD glass-ceramics.The optimal sample had a high transmittance of 90.3%,the hardness was 7.72 GPa,the fracture toughness was 1.07 MPa·m^(1/2),and the elastic modulus was 103.1 GPa.

Properties of Ultra-low Thermal Expansion LAS Transparent Glass-ceramics Prepared by Spodumene

The glass-ceramics were prepared with the spodumene mineral as the main raw material,and the effects of ZrO_(2)replacing TiO_(2)on the samples were systematically investigated.The results show that the substitution of ZrO_(2)for TiO_(2)is not conductive to precipitate𝛽β-quartz solid solution phase,but can improve the transparency and flexural strength of glass-ceramics.And the glass-ceramic with the highest visible light transmittance(87%)and flexural strength(231.80 MPa)exhibits an ultra-low thermal expansion of-0.028×10^(-7)K^(-1)in the region of 30-700℃.

Numerical Simulation of a Viscoelastic Thinning Process for Preparing Flexible Glasses by Redrawing Method

The forming process of the flexible ultrathin glasses(UTG)prepared by the redrawing method was numerically simulated using ANSYS Polyflow software.In the forming process by the redrawing method,temperature,viscosity,transverse and longitudinal velocity distribution of the glasses with different compositions were studied.Furthermore,the influence of these factors on the width and thickness of the flexible glass plate was investigated.It is found that the internal and external heat exchange of glass has a dominant influence on the viscosity variation during the UTG forming process,which is inconsistent with the general viscosity-temperature dependence.The glass that first reaches the lower limit of forming viscosity can significantly resist the shrinking effect caused by surface tension,making the glass wider during the forming.If the original glass width remains unchanged,the glass thickness or feeding speed is reduced,wider and thinner flexible glasses can be produced.

Superhydrophobic Surface-Assisted Preparation of Microspheres and Supraparticles and Their Applications

Superhydrophobic surface(SHS) has been well developed, as SHS renders the property of minimizing the water/solid contact interface. Water droplets deposited onto SHS with contact angles exceeding 150°, allow them to retain spherical shapes, and the low adhesion of SHS facilitates easy droplet collection when tilting the substrate. These characteristics make SHS suitable for a wide range of applications. One particularly promising application is the fabrication of microsphere and supraparticle materials. SHS offers a distinct advantage as a universal platform capable of providing customized services for a variety of microspheres and supraparticles. In this review, an overview of the strategies for fabricating microspheres and supraparticles with the aid of SHS, including cross-linking process, polymer melting,and droplet template evaporation methods, is first presented. Then, the applications of microspheres and supraparticles formed onto SHS are discussed in detail, for example, fabricating photonic devices with controllable structures and tunable structural colors, acting as catalysts with emerging or synergetic properties, being integrated into the biomedical field to construct the devices with different medicinal purposes, being utilized for inducing protein crystallization and detecting trace amounts of analytes. Finally,the perspective on future developments involved with this research field is given, along with some obstacles and opportunities.

Research Progress of High Entropy Carbides

High entropy carbides (HECds) are multi-component carbides consisting of transition metal carbides.HECds are generally composed of five or more metal cations of the equal or near-equal substances,obtaining a single crystal structure.HECds have great potentials for future applications due to excellent mechanical,antioxidant and thermal properties.Due to their complex crystal structures and lattice distortion,computer simulations are widely used to efficiently associate the properties of HECds with the corresponding microstructures.In response to the development of HECds,this article provides an overview of the basic design,preparation process and properties of HECds.

Research and Practice on the Construction of Professional Cluster in Application-Oriented Local Undergraduate Universities:Taking Environ-mental Chemical Engineering Professional Cluster in Pingdingshan University as an Example

Based on the analysis of the importance of professional cluster construction by ecological theory,with the change of social demand for talents,this paper explores the practice of environmental chemical professional cluster construction in Pingdingshan University,including gradually perfecting teaching conditions and reforming teaching mode,breaking through the limitations of resources,integrating the boundaries of colleges and departments,integrating multiple resources,innovating systems and mechanisms,reconstructing professional clusters,decon-structing professional connotations,reorganizing curriculum systems,etc.,in order to better build the ecological chain network of education in application-oriented colleges and universities,realize the deep integration of industry and education,train future-oriented interdisciplinary applied talents of new engineering,and realize the construction of characteristic professional cluster in application-oriented colleges.

Enhancing the crystallinity and stability of perovskite solar cells with 4-tert-butylpyridine induction for efficiency exceeding 24%

Perovskite solar cells(PSCs)have emerged as a promising photovoltaic technology because of their high light absorption coefficient,long carrier diffusion distance,and tunable bandgap.However,PSCs face challenges such as hysteresis effects and stability issues.In this study,we introduced a novel approach to improve film crystallization by leveraging 4-tert-butylpyridine(TBP)molecules,thereby enhancing the performance and stability of PSCs.Our findings demonstrate the effective removal of PbI_(2)from the perovskite surface through strong coordination with TBP molecules.Additionally,by carefully adjusting the concentration of the TBP solution,we achieved enhanced film crystallinity without disrupting the perovskite structure.The TBP-treated perovskite films exhibit a low defect density,improved crystallinity,and improved carrier lifetime.As a result,the PSCs manufactured with TBP treatment achieve power conversion efficiency(PCE)exceeding 24%.Moreover,we obtained the PCE of 21.39%for the 12.25 cm^(2)module.

Performance optimization of the neutron-sensitive image intensifier used in neutron imaging

As a non-destructive testing technology,neutron imaging plays an important role in various fields,including material science,nuclear engineering,and fundamental science.An imaging detector with a neutron-sensitive image intensifier has been developed and demonstrated to achieve good spatial resolution and timing resolution.However,the influence of the working voltage on the performance of the neutron-sensitive imaging intensifier has not been studied.To optimize the performance of the neutron-sensitive image intensifier at different voltages,experiments have been performed at the China Spallation Neutron Source(CSNS)neutron beamline.The change in the light yield and imaging quality with different voltages has been acquired.It is shown that the image quality benefits from the high gain of the microchannel plate(MCP)and the high accelerating electric field between the MCP and the screen.Increasing the accelerating electric field is more effective than increasing the gain of MCPs for the improvement of the imaging quality.Increasing the total gain of the MCP stack can be realized more effectively by improving the gain of the standard MCP than that of the n MCP.These results offer a development direction for image intensifiers in the future.

Silica Gel Supported Trifluoromethanesulfonic Acid Catalyzed Beckmann Rearrangement of Cyclohexanone Oxime in Liquid Phase

The liquid phase Beckmann rearrangement of cyclohexanone oxime (CHO) using fuming sulfuric acid as a catalyst is a traditional method for preparing ε-caprolactam (CPL). This process has drawbacks, such as environmental pollution, corrosion of equipment, and low added value of by-product ammonium sulfate. This article designed and prepared a green silica gel-supported trifluoromethanesulfonic acid catalyst for the liquid-phase Beckmann rearrangement of CHO to prepare (CPL). The influencing factors of catalyst preparation and the optimal reaction conditions for Beckmann rearrangement were investigated. It was found that the optimal conditions for catalyst preparation were as follows: raw material silica gel:trifluoromethanesulfonic acid = 1:0.2 (mass ratio), room temperature, stirring time of 2.5 hours, and solvent of acetonitrile, silica gel mesh size is 100 - 200. The optimal reaction conditions for Beckmann rearrangement are CHO: catalyst = 1:2 (mass ratio), temperature of 130˚C, solvent of benzonitrile, volume of 30 mL/g CHO, and reaction time of 4 hours. Under the above conditions, the conversion of CHO is 90%, and the selectivity of CPL is 90%.

Carbonation of Pure Minerals in Portland Cement:Evolution in Products as a Function of Water-to-solid Ratio

Minerals in Portland cement including tricalcium silicate(C_(3)S),β-dicalcium silicate(β-C_(2)S),tricalcium aluminate(C_(3)A),and tetracalcium ferroaluminate(C_(4)AF),show a significantly different activity and product evolution for CO_(2)curing at various water-to-solid ratios.These pure minerals were synthesized and subject to CO_(2)curing in this study to make an in-depth understanding for the carbonation properties of cement-based materials.Results showed that the optimum water-to-solid ratios of C_(3)S,β-C_(2)S,C_(3)A and C_(4)AF were 0.25,0.15,0.30 and 0.40 for carbonation,corresponding to 2 h carbonation degree of 38.5%,38.5%,24.2%,and 21.9%,respectively.The produced calcite duringβ-C_(2)S carbonation decreased as the water-to-solid ratio increased,with an increase in content of metastable CaCO_(3)of vaterite and aragonite.The thermodynamic stability of CaCO_(3)produced during carbonation was C_(3)A>C_(4)AF>β-C_(2)S>C_(3)S.The carbonation degree of Portland cement was predicted based on the results of pure minerals and the composition of cement,and the error of predicted production of CaCO_(3)was only 1.1%,which provides a potential method to predict carbonation properties of systems with a complex mineral composition.

Evaluation of a Rapid Diagnostic Test, Boson Biotech SARS CoV-2 Ag, for the Detection of SARS-CoV-2 in Gabon

1) Background: Rapid and acurate diagnostic testing for case identification, quarantine, and contact tracing is essential for managing the COVID 19 pandemic. Rapid antigen detection tests are available, however, it is important to evaluate their performances before use. We tested a rapid antigen detection of SARS-CoV-2, based on the immunochromatography (Boson Biotech SARS-CoV-2 Ag Test (Xiamen Boson Biotech Co., Ltd., China)) and the results were compared with the real time reverse transcriptase-Polymerase chain reaction (RT-PCR) (Gold standard) results;2) Methods: From November 2021 to December 2021, samples were collected from symptomatic patients and asymptomatic individuals referred for testing in a hospital during the second pandemic wave in Gabon. All these participants attending “CTA Angondjé”, a field hospital set up as part of the management of COVID-19 in Gabon. Two nasopharyngeal swabs were collected in all the patients, one for Ag test and the other for RT-PCR;3) Results: A total of 300 samples were collected from 189 symptomatic and 111 asymptomatic individuals. The sensitivity and specificity of the antigen test were 82.5% [95%CI 73.8 - 89.3] and 97.9 % [95%CI 92.2 - 98.2] respectively, and the diagnostic accuracy was 84.4% (95% CI: 79.8 - 88.3%). The antigen test was more likely to be positive for samples with RT-PCR Ct values ≤ 32, with a sensitivity of 89.8%;4) Conclusions: The Boson Biotech SARS-CoV-2 Ag Test has good sensitivity and can detect SARS-CoV-2 infection, especially among symptomatic individuals with low viral load. This test could be incorporated into efficient testing algorithms as an alternative to PCR to decrease diagnostic delays and curb viral transmission.

Effect of TiO_2 on Crystallization of the Glass Ceramics Prepared from Granite Tailings

The effect of TiO2 on the crystallization behaviors of the glass ceramics prepared from granite tailings was investigated by differential scanning calorimetry （DSC）, X-ray diffraction （XRD）, and field emission scanning electron microscopy （FESEM）. The results showed that the crystallization peak temperature decreased firstly, and then increased with the increase of TiO2 content. The optimum addition amount of TiO2 was 8 wt%. With a single-step heat treatment at 924 ℃ for I h, augite precipitated as the only crystalline phase both on the surface and in the interior. The avrami parameter of the sample was 3.25, suggesting a two- dimensional crystallization mechanism. The activation energies for phase separation and crystallization of augite were 321.75 and 698.83 kJ/mol, respectively.

Crystallization Behavior and Kinetics of Lithium Aluminosilicate Glasses with Various Li_(2)O Contents

The crystallization behavior of Li_(2)O-Al_(2)O_(3)-SiO_(2) glasses with various concentration of Li2O were investigated by DSC,XRD,and FE-SEM.The h/l-quartz s.s.is the main crystalline phase for all of the glass with the heat treatment of 720℃/3 h+800℃/1.5 h while the crystallinity and crystal size increase with the increase of Li2O contents.Due to the negative thermal expansion coefficient of h/l-quartz s.s.,the thermal expansion coefficient of glass-ceramics decreases with the increasing of Li2O contents.When the Li2O content is 9mol%,the near-zero CTE20-700℃=-0.09×10^(-6)℃^(-1) is obtained upon the heat treatment of 720℃/3 h+800℃/1.5 h.The crystallization activation energy of the glass with 9mol%Li2O is about 351 kJ/mol,and the crystallization mechanism is volume crystallization.

Crystallization Kinetics of Lithium Aluminum Germanium Phosphate Glass by DSC Technique

Abstract： The crystallization kinetics of Li20-A12O3-GeO2-P205 （LAGP） glass fabricated via the conventional melt-quenching method was studied by differential scanning calorimetry （DSC） under non- isothermal condition at different heating rates. The activation energy of glass transition Eg is 634.4 kJ/mol, indicating that LAGP glass is easy to crystallize at an elevated temperature. The activation energy of crystallization Eo and Avrami index n obtained from Matusita＇s model are 442.01 kJ/mol and 1.7, respectively. The value of n reveals that bulk crystallization predominates slightly over surface crystallization during crystallization process. LAGP glass-ceramics after different heat treatments have the same crystalline phases determined as major phase LiGe2（PO4）3, with A1PO4 and GeO2 as their impurity phases.

Crystallization Kinetics of Calcium Aluminate Glasses Studied by Non-isothermal Techniques

The crystallization kinetics of 38.0CaO-38.0Al2O3-10.5BaO-6.5MgO-6.0Y2O3-1.0（Na2O＋K2O） （wt%） glass was studied by differential scanning calorimeter （DSC） and X-ray diffraction （XRD） techniques. Tile results showed that DSC curves of calcium aluminate glass have a single glass transition temperature followed by one crystallization peak for the heating rates β = 5 K/min and two crystallization temperatures T1 and T2 for β≥ 10 K/min. The activation energies of crystallization obtained from the Gao-Wang model of the first exothermal peak and the second exothermal peak of calcium aluminate glass are 340 and 662 kJ/mol, respectively. The Avrami exponents of the both crystallization peaks are approximately 2, indicating the two- dimensional crystalline growth during its transformation from amorphous to crystalline. Ca12Al14O33, Ca3Al2O6 and unknown crystalline phases firstly appear when calcium aluminate glass is heat-treated. With the extending of heat-treatment duration, BaAl2O4 phase comes out.

Thermal properties of glass-ceramic bonded thermal barrier coating system

The thermal properties of a thermal barrier coating （TBC） system comprised of BaO-MgO-SiO_2 based glass-ceramic bond coating, 8% （mass fraction） yttria stabilized zirconia （8YSZ） top coating and nimonic alloy substrate were evaluated. The thermal diffusivity and thermal conductivity of the TBC coated substrate were lower than those of bare substrate and glass-ceramic coated substrate under identical conditions. The specific heat capacity, thermal diffusivity and thermal conductivity of the TBC coated substrate increase with the increase of the temperature. Further, it is observed that the thermal conductivity of the TBC system decreases with the increase in the top coating thickness.