The commercialization of a polymer membrane H2-O2 fuel cell and its widespread use call for the development of cost-effective oxygen reduction reaction(ORR)nonplatinum group metal(NPGM)catalysts.Nevertheless,to meet t...The commercialization of a polymer membrane H2-O2 fuel cell and its widespread use call for the development of cost-effective oxygen reduction reaction(ORR)nonplatinum group metal(NPGM)catalysts.Nevertheless,to meet the requests for the real-world fuel cell application and replacing platinum catalysts,it still needs to address some challenges for NPGM catalysts regarding the sluggish ORR kinetics in the cathode and their poor durability in acidic environment.In response to these issues,numerous efforts have been made to study NPGM catalysts both theoretically and experimentally,developed these into the atomically dispersed coordinated metal-nitrogen-carbon(M-N-C)form over the past decades.In this review,we present a comprehensive summary of recent advancements on NPGM catalysts with high activity and durability.Catalyst design strategies in terms of optimizing active-site density and enhancing catalyst stability against demetalization and carbon corrosion are highlighted.It is also emphasized the importance of understanding the mechanisms and principles behind those strategies through a combination of theoretical modeling and experimental work.Especially,further understanding the mechanisms related to the active-site structure and the formation process of the single-atom active site under pyrolysis conditions is critical for active-site engineering.Optimizing the active-site distance is the basic principle for improving catalyst activity through increasing the catalyst active-site density.Theoretical studies for the catalyst deactivation mechanism and modeling stable active-site structures provide both mechanisms and principles to improve the NPGM catalyst durability.Finally,currently remained challenges and perspectives in the future on designing high-performance atomically dispersed NPGM catalysts toward fuel cell application are discussed.展开更多
Rational design of electrocatalysts is important for a sustainable oxygen evolution reaction(OER).It is still a huge challenge to engineer active sites in multi-sizes and multi-components simultaneously.Here,a series ...Rational design of electrocatalysts is important for a sustainable oxygen evolution reaction(OER).It is still a huge challenge to engineer active sites in multi-sizes and multi-components simultaneously.Here,a series of CoxP nanoparticles(NPs)confined in an SiO2matrix(SiO2/CoxP)is designed and synthesized as OER electrocatalysts.The phosphorization of the hydrolyzed Co-phyllosilicate promotes the formation of ultrasmall and small Co2P and CoP.These are firmly confined in the SiO2matrix.The coupling of multi-size and multi-component CoxP catalysts can regulate reaction kinetics and electron transfer ability,enrich the active sites,and eventually promote the intrinsic OER activity.The SiO2matrix provides abundant porous structure and oxygen vacancies,and these facilitate the exposure of active sites and improve conductivity.Because of the synergy and interplay of multisized/component CoxP NPs and the porous SiO2matrix,the unique SiO2/CoxP heterostructure exhibits low overpotential(293 m V@10 mA cm-2),and robust stability(decay 12 mV after 5000 CV cycles,97.4%of initial current after 100 h chronoamperometric)for the OER process,exceeding many advanced metal phosphide electrocatalysts.This work provides a novel tactic to design low-cost,simple,and highly efficient OER electrocatalysts.展开更多
Highly dispersed gadolinium zirconate(GZ)nanoparticles with fluorite structure were successfully synthesized by co-precipitation method,and their phase composition and microstructure,formation mechanism,and grain grow...Highly dispersed gadolinium zirconate(GZ)nanoparticles with fluorite structure were successfully synthesized by co-precipitation method,and their phase composition and microstructure,formation mechanism,and grain growth kinetics were investigated.The results suggest that the nanoparticles were obtained through hydroxide dehydration and solid phase reaction.High dispersion was accomplished by ethanol solvent to reduce the hydrogen bond and sodium dodecyl benzene sulfonate(SDBS)surfactant to increase the electrostatic repulsion between the nanoparticles.The grain growth activation energy of GZ powders calcined at lower temperature(<1200°C)is 86.5 kJ/mol(Ql),and the grain growth activation energy of GZ powders calcined at higher temperature(>1200°C)is 148.4 kJ/mol(Qh).The current study shows that the optimal process to synthesize dispersed GZ nanoparticles includes ethanol solvent,3 wt.%SDBS surfactant,and 1100°C as calcining temperature.展开更多
Thermal barrier coatings(TBCs)in gas turbine engines are used in expressly harsh environments;thus,assessing TBC integrity status is critical for safety and reliability.However,traditional periodic maintenance involve...Thermal barrier coatings(TBCs)in gas turbine engines are used in expressly harsh environments;thus,assessing TBC integrity status is critical for safety and reliability.However,traditional periodic maintenance involves visual inspections of the TBCs,requiring the gas turbine to be decommissioned and partially dismantled.Most importantly,tiny defects or internal damages that easily cause coating failure cannot be identified.In this work,a new nondestructive evaluation(NDE)technique of TBCs based on quantum dot(QD)anion exchange is first explored internationally.By exchanging anions between the Cl ions and the CsPbBr_(3) QDs,the degrees of salt corrosion of the TBCs are evaluated.The resultant NDE technique shows that the colour of the TBCs obviously changes from green to blue,accompanied by a large blueshift(~100 nm)of the photoluminescence(PL)peak position.In addition,the relationship between the PL peak position and coating thermophysical properties indicates that the precision of this NDE technique may easily identify theμm-level of the thermal growth oxide(TGO)changes inside the TBCs.展开更多
High entropy alloys(HEAs) are of great interest in the community of materials science and engineering due to their unique phase structure. They are constructed with five or more principal alloying elements in equimola...High entropy alloys(HEAs) are of great interest in the community of materials science and engineering due to their unique phase structure. They are constructed with five or more principal alloying elements in equimolar or near-equimolar ratio. Therefore, HEAs can derive their performance from multiple principal elements rather than a single element. In this work, solid-state cold spraying(CS) was applied for the first time to produce FeCoNiCrMn HEA coating. The experimental results confirm that CS can be used to produce a thick HEA coating with low porosity. As a low-temperature deposition process, CS completely retained the HEA phase structure in the coating without any phase transformation. The characterization also reveals that the grains in the CSed HEA coating had experienced significant refinement as compared to those in the as-received HEA powder due the occurrence of dynamic recrystallization at the highly deformed interparticle region. Due to the increased dislocation density and grain boundaries,CSed HEA coating was much harder than the as-received powder. The tribological study shows that the CSed FeCoNiCrMn HEA coating resulted in lower wear rate than laser cladded HEA coatings.展开更多
In the present work,selective laser melting(SLM)technology was utilized for manufacturing CX stainless steel samples under a series of laser parameters.The effect of laser linear energy density on the microstructure c...In the present work,selective laser melting(SLM)technology was utilized for manufacturing CX stainless steel samples under a series of laser parameters.The effect of laser linear energy density on the microstructure characteristics,phase distribution,crystallographic orientation and mechanical properties of these CX stainless steel samples were investigated theoretically and experimentally via scanning electron microscope(SEM),X-ray diffraction(XRD),electron backscatter diffraction(EBSD)and transmission electron microscope(TEM).Based on the systematic study,the SLM CX stainless steel sample with best surface roughness(Ra=4.05±1.8μm)and relative density(Rd=99.72%±0.22%)under the optimal linear density(η=245 J/m)can be obtained.SLM CX stainless steel was primarily constituted by a large number of fine martensite(α’phase)structures(i.e.,cell structures,cellular dendrites and blocky grains)and a small quantity of austenite(γphase)structures.The pre ferred crystallographic orientation(i.e.,<111>direction)can be determined in the XZ plane of the SLM CX sample.Furthermore,under the optimal linear energy density,the good combinations with the highest ultimate tensile strength(UTS=1068.0%±5.9%)and the best total elongation(TE=15.70%±0.26%)of the SLM CX sample can be attained.Dislocation strengthening dominates the strengthening mechanism of the SLM CX sample in as-built state.展开更多
Quasi-columnar structure 7YSZ(yttria stabilized zirconia) thermal barrier coatings(TBCs) are prepared by plasma spray-physical vapor deposition(PS-PVD) onto pretreated and un-pretreated bond coating, respectivel...Quasi-columnar structure 7YSZ(yttria stabilized zirconia) thermal barrier coatings(TBCs) are prepared by plasma spray-physical vapor deposition(PS-PVD) onto pretreated and un-pretreated bond coating, respectively. An isothermal oxidation experiment of 7YSZ TBCs is carried out in the atmosphere of 950 °C in order to simulate the high-temperature oxidation process of engine blades. The isothermal oxidation process of 7YSZ thermal barrier coatings is investigated systematically by impedance spectroscopy. The electrochemical physical model and equivalent circuit of columnar 7YSZ coatings are established. Results show that the isothermal oxidation kinetic curve of columnar 7YSZ thermal barrier coatings appears to follow the parabolic law. A pretreatment of bond coating can reduce the growth rate of the thermally grown oxide(TGO) layer, restraining the initiation and propagation of microcracks between YSZ and TGO layers. The oxidation rate constants of 7YSZ coatings with pretreated and un-pretreated bond coating are 0.101×10^(-12) cm^2·s^(-1) and 0.115 × 10^(-13) cm^2 ·s^(-1), respectively. Impedance analysis shows that the content of oxygen vacancies decreases and the density increases after the TGO layer is oxidized for 150 h. In addition, shrinkage microcracks formed by sintering during the oxidation process is the main reason for an increase of the capacitance and a decrease of the resistance in the grain boundary of YSZ.展开更多
In this work,the Invar 36 alloys were manufactured using cold spray(CS)additive manufacturing technique.The systematic investigations were made on the microstructural evolution,thermal expansion and mechanical propert...In this work,the Invar 36 alloys were manufactured using cold spray(CS)additive manufacturing technique.The systematic investigations were made on the microstructural evolution,thermal expansion and mechanical properties under as-sprayed(AS)and heat-treated(HT)conditions.XRD(X-ray diffraction)and ICP-AES(inductively coupled plasma atomic emission spectroscopy)analyses show that no phase transformation,oxidation,nor element content change have occurred.The X-ray computed tomography(XCT)exhibited a near fully dense structure with a porosity of 0.025%in the helium-produced sample under as-sprayed condition,whereas the nitrogen-produced samples produced at 5 MPa and 800℃show more irregular pore defects.He-AS sample shows a more prominent grain refinement than that of nitrogen samples due to the more extensive plastic deformation.The post heat-treatment exhibited a promoted grain growth,inter-particle diffusion,as well as the formation of annealing twins.Between25℃and 200℃,the nitrogen samples possessed lower CTE(coefficient of thermal expansion)values(1.53×10^(-6)/℃)compared with those produced by casting and laser additive manufacturing.The He-AS samples exhibited a noticeable negative CTE value between 25℃and 200℃,which may due to the significant compressive residual stress(-272 MPa)compensating its displacement with temperature increase during CTE test.The N2-HT and He-HT Invar 36 samples present a notable balance between strength and ductility.In conclusion,the CS technique can be considered as a potential method to produce the Invar36 component with high thermal and mechanical performance.展开更多
Plasma spray-physical vapor deposition(i.e.,PS-PVD)is a promising method for obtaining advanced environmental barrier coatings(EBCs).The EBCs must meet some requirements in the application,in which the thermal cycle p...Plasma spray-physical vapor deposition(i.e.,PS-PVD)is a promising method for obtaining advanced environmental barrier coatings(EBCs).The EBCs must meet some requirements in the application,in which the thermal cycle performance affects the service lifetime.The preparation of artificial vertical cracks in Yb_(2)SiO_(5) coatings is an effective approach for meeting the requirements above because vertical cracks provide a strain tolerance.To clarify the formation mechanism of vertical cracks during the PSPVD,the effects of coating thickness and substrate temperature on the formation of vertical cracks were investigated.In addition,the interactions of spray powder and plasma flame during coating deposition were also characterized by optical spectroscopy.It is indicated that vertical cracks are formed due to a thermal expansion mismatch between Yb_(2)SiO_(5) and mullite coating,transient cooling after deposition and the nucleation of evaporated Yb_(2)SiO_(5) as well.展开更多
Inspired by the coupling phenomena in biological systems, to improve the solid particle erosion resistance of Thermal Barrier Coatings (TBCs), different kinds of bionic units were made on the coating surfaces using ...Inspired by the coupling phenomena in biological systems, to improve the solid particle erosion resistance of Thermal Barrier Coatings (TBCs), different kinds of bionic units were made on the coating surfaces using Bionic Coupled Laser Remelting (BCLR) process. The NiCoCrAlYTa/ZrO2-7wt%Y2O3 double-layer structured TBCs were prepared by air plasma spraying. The microstructure, microhardness and phase composition of the as-sprayed and bionic specimens were examined. The solid particle erosion behaviors of bionic specimens as function of bionic unit shape were investigated. The results indicated that the bionic specimens had better erosion resistance than the as-sprayed specimen. The specimen with striation and grid bionic units had the better erosion resistance, while the dot showed the worse. The bionic units were characterized by the dense columnar crystal structure and the high hardness, which are the main reasons for improving the erosion resistance. Under the synergistic action of the shear stress and normal stress on the protrusive coating surface, the erosion failure of the as-sprayed TBCs was proved to be the fracture and spallation of the splats. By contrast, the spallation of segmented bionic unit occurred in the overlapping area between the adjacent laser irradiation, and the erosive unit surface presented the clear and deep furrows, which revealed that the erosion failure mechanism of bionic TBCs was dominated by brittle and some ductile erosion. These results showed more opportunities for bionic application in improving the solid particle erosion resistance of components in the windy and sandy environment.展开更多
A quasi-solid-state lithium battery is assembled by plasma sprayed amorphous Li_(4)Ti_(5)O_(12) to provide the outstanding electrochemical stability and better normal interface contact.Scanning Electron Microscope(SEM...A quasi-solid-state lithium battery is assembled by plasma sprayed amorphous Li_(4)Ti_(5)O_(12) to provide the outstanding electrochemical stability and better normal interface contact.Scanning Electron Microscope(SEM),Scanning Transmission Electron Microscopy(STEM),Transmission Electron Microscopy(TEM),and Energy Dispersive Spectrometer(EDS)were used to analyze the structural evolution and performance of plasma sprayed amorphous LTO electrode and ceramic/polymer composite electrolyte before and after electrochemical experiments.By comparing the electrochemical performance of the amorphous LTO electrode and the traditional LTO electrode,the electrochemical behavior of different electrodes is studied.The results show that plasma spraying can prepare an amorphous LTO electrode coating of about 8μm.After 200 electrochemical cycles,the structure of the electrode evolved,and the inside of the electrode fractured and cracks expanded,because of recrystallization at the interface between the rich fluorine compounds and the amorphous LTO electrode.Similarly,the ceramic/polymer composite electrolyte has undergone structural evolution after 200 test cycles.The electrochemical cycle results show that the cycle stability,capacity retention rate,coulomb efficiency,and internal impedance of amorphous LTO electrode are better than traditional LTO electrode.This innovative and facile quasi-solid-state strategy is aimed to promote the intrinsic safety and stability of working lithium battery,shedding light on the development of next-generation high-performance solid-state lithium batteries.展开更多
7 YSZ coating was prepared by plasma sprayphysical vapor deposition(PS-PVD) technique based on a specific experimental design.The microstructure and deposition properties of 7 YSZ coating along the radius of plasma je...7 YSZ coating was prepared by plasma sprayphysical vapor deposition(PS-PVD) technique based on a specific experimental design.The microstructure and deposition properties of 7 YSZ coating along the radius of plasma jet were investigated in detail.Results show that the coating presents regional characteristic in the radial direction,which could be divided into three typical zones:In Zone Ⅰ,the coating is all composed of columnar structures with cauliflower structure,and the coating properties including the surface roughness and deposition efficiency(DE) are almost stable;in Zone Ⅲ,the coating is made up of solid particles,droplet and gas phase mixed without columnar structures;Zone Ⅱ is between Zone Ⅰ and ZoneⅢ, in which there are columns with domed top and small particles.Based on experiment results,a model on the state and distribution of particles in plasma jet was proposed to clarify the regional characteristic.This study is helpful to comprehend and control coatings deposition by PS-PVD technique.展开更多
The oxide scale present on the feedstock particles is critical for inter-particle bond formation in the cold spray(CS)coating process,therefore,oxide scale break-up is a prerequisite for clean metallic contact which g...The oxide scale present on the feedstock particles is critical for inter-particle bond formation in the cold spray(CS)coating process,therefore,oxide scale break-up is a prerequisite for clean metallic contact which greatly improves the quality of inter-particle bonding within the deposited coating.In general,a spray powder which contains a thicker oxide scale on its surface(i.e.,powders having high oxygen content)requires a higher critical particle velocity for coating formation,which also lowers the deposition efficiency(DE)making the whole process a challenging task.In this work,it is reported for the first time that an artificially oxidized copper(Cu)powder containing a high oxygen content of 0.81 wt.%with a thick surface oxide scale of 0.71μm.,can help achieve an astonishing increment in DE.A transition of surficial oxide scale evolution starting with crack initiations followed by segmenting to peeling-off was observed during the high velocity particle impact of the particles,which helps in achieving an astounding increment in DE.Single-particle deposit observations revealed that the thick oxide scale peels off from most of the sprayed powder surfaces during the high-velocity impact,which leaves a clean metallic surface on the deposited particle.This makes the successive particles to bond easily and thus leads to a higher DE.Further,owning to the peeling-off of the oxide scale from the feedstock particles,very few discontinuous oxide scale segments are retained at inter-particle boundaries ensuring a high electrical conductivity within the resulting deposit.Dependency of the oxide scale threshold thickness for peeling-off during the high velocity particle impact was also investigated.展开更多
In this work,a novel computational framework for establishment of atomic mobility database directly from the experimental composition profiles and its uncertainty quantification was developed by merging the Bayesian i...In this work,a novel computational framework for establishment of atomic mobility database directly from the experimental composition profiles and its uncertainty quantification was developed by merging the Bayesian inference with the Markov chain Monte Carlo algorithm into the latest version of the Hit DIC software.By treating the simulation of composition profiles with the composition-dependent coefficients as the forward problem,the inverse coefficient problem that provides the potential way to compute the atomic mobilities directly from composition profiles can be postulated.The values and uncertainties of the atomic mobility parameters of interest were assessed by means of Bayesian inference,where the composition profiles were consumed directly.Benchmark tests that consider the number of diffusion couples and the noise levels were conducted.Practical application of the current framework in determination of atomic mobility descriptions of fcc Ni-Ta and Ni-Al-Ta alloys was performed.Further discussion about the results of the benchmark tests and practical study case indicated that the present computational framework together with numbers of composition profiles from the multiple diffusion couples can help to establish the high-quality atomic mobility database of the target multicomponent alloys.展开更多
Plasma spray-physical vapor deposition(PS-PVD) as a novel coating process based on low-pressure plasma spray(LPPS) has been significantly used for thermal barrier coatings(TBCs).A coating can be deposited from l...Plasma spray-physical vapor deposition(PS-PVD) as a novel coating process based on low-pressure plasma spray(LPPS) has been significantly used for thermal barrier coatings(TBCs).A coating can be deposited from liquid splats, nano-sized clusters, and the vapor phase forming different structured coatings, which shows obvious advantages in contrast to conventional technologies like atmospheric plasma spray(APS) and electron beam-physical vapor deposition(EBPVD). In addition, it can be used to produce thin, dense, and porous ceramic coatings for special applications because of its special characteristics, such as high power, very low pressure, etc. These provide new opportunities to obtain different advanced microstructures, thus to meet the growing requirements of modern functional coatings. In this work, focusing on exploiting the potential of gas-phase deposition from PS-PVD, a series of 7 YSZ coating experiments with various process conditions was performed in order to better understand the deposition process in PS-PVD, where coatings were deposited on different substrates including graphite and zirconia. Meanwhile, various substrate temperatures were investigated for the same substrate. As a result, a deposition mechanism of heterogeneous nucleation has been presented showing that surface energy is an important influencing factor for coating structures. Besides, undercooling of the interface between substrate and vapor phase plays an important role in coating structures.展开更多
The YSZ coatings are prepared by the plasma spray-physical vapor deposition(PS-PVD)technology based on a specific experimental design.The structure,thickness and growth angle of YSZ coatings on the entire circumferent...The YSZ coatings are prepared by the plasma spray-physical vapor deposition(PS-PVD)technology based on a specific experimental design.The structure,thickness and growth angle of YSZ coatings on the entire circumferential surface of the cylindrical sample are studied.The results indicated that the structure,thickness and deflection growth angle of YSZ coatings are related to the orientation of deposition location.The numerical simulation of the multiphase mixed fluid near the substrate is carried out and the deposition regularity and mechanism of YSZ coatings prepared by PS-PVD is deduced.The growth rate is related to the local characteristics of the plasma flow field,and is directly proportional to the field pressure and inversely proportional to the field velocity.The growth angle of the coating is generally affected by the flow direction of the plasma jet.Especially,the normal component of velocity vector,V_(norm),mainly affects the speed at which the coating grows vertically upwards.The tangential component of velocity vector,V_(tan),determines the degree that the coating growth direction deviates from the vertical direction.When V_(tan)≠0,the coating forms a fine column with a certain deflection angle and finally develops into an oblique columnar structure.展开更多
Spherical Gd_(2)Zr_(2)O_(7)hollow powders with a mean size of 8.8μm were fabricated as feedstock for thermal barrier coatings(TBCs)by spray-drying.The single-ceramic-layer(SCL)Gd_(2)Zr_(2)O_(7)TBCs and double-ceramic...Spherical Gd_(2)Zr_(2)O_(7)hollow powders with a mean size of 8.8μm were fabricated as feedstock for thermal barrier coatings(TBCs)by spray-drying.The single-ceramic-layer(SCL)Gd_(2)Zr_(2)O_(7)TBCs and double-ceramic-layer(DCL)Gd_(2)Zr_(2)O_(7)/YSZ TBCs with quasicolumnar structure were successfully fabricated by plasma spray-physical vapor deposition(PS-PVD).Tensile and water-quenching tests were applied to evaluate TBCs performances.The results show that adhesion strength of SCL Gd_(2)Zr_(2)O_(7)TBCs and DCL Gd_(2)Zr_(2)O_(7)/YSZ TBCs is36.5 MPa and 15.4 MPa,respectively.The delamination of SCL Gd_(2)Zr_(2)O_(7)TBCs and DCL Gd_(2)Zr_(2)O_(7)/YSZ TBCs in the tensile test takes place at the middle and bottom of Gd_(2)Zr_(2)O_(7)layer,respectively,due to relatively lower fracture toughness of Gd_(2)Zr_(2)O_(7)layer.After 40 cycles of water-quenching test,DCL Gd_(2)Zr_(2)O_(7)/YSZ TBC surface keeps relatively intact,while SCL Gd_(2)Zr_(2)O_(7)TBC surface shows 20%visible destroyed regions,which demonstrates that DCL Gd_(2)Zr_(2)O_(7)/YSZ TBCs have a better thermal shock resistance than SCL Gd_(2)Zr_(2)O_(7)TBCs.The cracks in the SCL system propagate near thermally grown oxide(TGO)due to thermal mismatch and TGO growing stress,while cracks in the DCL system propagate in the Gd_(2)Zr_(2)O_(7)layer due to its relatively lower fracture toughness.展开更多
The narrow bandgap of the low-energy near-infrared(NIR)polymer would lead to overlap between adjacent energy levels,which is a major barrier to the preparation of Vis-NIR polymer bulk hetero-junction(BHJ)photodetector...The narrow bandgap of the low-energy near-infrared(NIR)polymer would lead to overlap between adjacent energy levels,which is a major barrier to the preparation of Vis-NIR polymer bulk hetero-junction(BHJ)photodetectors with small responsivity and photocurrent.In this study,a high-performance lateral inorganic-organic hybrid photodetector was constructed to eliminate this barrier by combining GaN nanowires(GaN-NWs)with PDPP3T:PC61BM-based BHJ.In stage one,high-quality GaN-NWs were synthesized by the catalyst-free CVD method.The mechanism for controlling GaN-NWs morphology by adjusting the NH3 flow rate was revealed.In stage two,the GaN-NWs with large electron mobility were used to accelerate the transfer of photogenerated carriers in the BHJ layer.Finally,compared with the BHJ device,the BHJ/GaN device demonstrated obvious improvements in responsivity and photocurrent at the wavelength between 400 and 1000 nm.The responsivity and photocurrent increased over 20-fold at the NIR band of 800e900 nm.Besides,owing to the energy level gradient effect,the BHJ/GaN device has a response speed of 7.8/<5.0 ms,which increases over three orders of magnitude than that of the GaN-NWs-based device(tr/tf:7.1/10.9 s).Therefore,the novel device structure proposed in this work holds great potential for preparing high-performance Vis-NIR photodetectors.展开更多
基金Guangdong High Level Innovation Research Institute,Grant/Award Numbers:2021B0909050001,2021B0909050001。
文摘The commercialization of a polymer membrane H2-O2 fuel cell and its widespread use call for the development of cost-effective oxygen reduction reaction(ORR)nonplatinum group metal(NPGM)catalysts.Nevertheless,to meet the requests for the real-world fuel cell application and replacing platinum catalysts,it still needs to address some challenges for NPGM catalysts regarding the sluggish ORR kinetics in the cathode and their poor durability in acidic environment.In response to these issues,numerous efforts have been made to study NPGM catalysts both theoretically and experimentally,developed these into the atomically dispersed coordinated metal-nitrogen-carbon(M-N-C)form over the past decades.In this review,we present a comprehensive summary of recent advancements on NPGM catalysts with high activity and durability.Catalyst design strategies in terms of optimizing active-site density and enhancing catalyst stability against demetalization and carbon corrosion are highlighted.It is also emphasized the importance of understanding the mechanisms and principles behind those strategies through a combination of theoretical modeling and experimental work.Especially,further understanding the mechanisms related to the active-site structure and the formation process of the single-atom active site under pyrolysis conditions is critical for active-site engineering.Optimizing the active-site distance is the basic principle for improving catalyst activity through increasing the catalyst active-site density.Theoretical studies for the catalyst deactivation mechanism and modeling stable active-site structures provide both mechanisms and principles to improve the NPGM catalyst durability.Finally,currently remained challenges and perspectives in the future on designing high-performance atomically dispersed NPGM catalysts toward fuel cell application are discussed.
基金supported by the Training Program for Academic and Technical Leaders of Major Disciplines in Jiangxi Province(No.20212BCJ23020)the Science and Technology Project of Jiangxi Provincial Department of Education(No.GJJ211305)+1 种基金the National Natural Science Foundation of China(No.51671010)the National University Students Innovation and Entrepreneurship Training Program(No.202110408005)。
文摘Rational design of electrocatalysts is important for a sustainable oxygen evolution reaction(OER).It is still a huge challenge to engineer active sites in multi-sizes and multi-components simultaneously.Here,a series of CoxP nanoparticles(NPs)confined in an SiO2matrix(SiO2/CoxP)is designed and synthesized as OER electrocatalysts.The phosphorization of the hydrolyzed Co-phyllosilicate promotes the formation of ultrasmall and small Co2P and CoP.These are firmly confined in the SiO2matrix.The coupling of multi-size and multi-component CoxP catalysts can regulate reaction kinetics and electron transfer ability,enrich the active sites,and eventually promote the intrinsic OER activity.The SiO2matrix provides abundant porous structure and oxygen vacancies,and these facilitate the exposure of active sites and improve conductivity.Because of the synergy and interplay of multisized/component CoxP NPs and the porous SiO2matrix,the unique SiO2/CoxP heterostructure exhibits low overpotential(293 m V@10 mA cm-2),and robust stability(decay 12 mV after 5000 CV cycles,97.4%of initial current after 100 h chronoamperometric)for the OER process,exceeding many advanced metal phosphide electrocatalysts.This work provides a novel tactic to design low-cost,simple,and highly efficient OER electrocatalysts.
基金This study was supported by the National Key Research and Development Program of China(grant 2017YFB0306100)the Natural Science Foundation of Hunan Province(grant 2018JJ2524)the International scientific technological cooperation projects of China(grants 2015DFR50580 and 2013DFA31440).
文摘Highly dispersed gadolinium zirconate(GZ)nanoparticles with fluorite structure were successfully synthesized by co-precipitation method,and their phase composition and microstructure,formation mechanism,and grain growth kinetics were investigated.The results suggest that the nanoparticles were obtained through hydroxide dehydration and solid phase reaction.High dispersion was accomplished by ethanol solvent to reduce the hydrogen bond and sodium dodecyl benzene sulfonate(SDBS)surfactant to increase the electrostatic repulsion between the nanoparticles.The grain growth activation energy of GZ powders calcined at lower temperature(<1200°C)is 86.5 kJ/mol(Ql),and the grain growth activation energy of GZ powders calcined at higher temperature(>1200°C)is 148.4 kJ/mol(Qh).The current study shows that the optimal process to synthesize dispersed GZ nanoparticles includes ethanol solvent,3 wt.%SDBS surfactant,and 1100°C as calcining temperature.
基金support form the Science and Technology Innovation Program of Hunan Province(No.2022RC1098)the Hunan Provincial Natural Science Foundation of China(Nos.2023JJ30563,2019JJ50565)+6 种基金the Scientific Research Fund of Hunan Provincial Education Department(Nos.22A0580,18A461)the Scientific Research Start-up Fund for High-level Talents in Xiangnan Universitysupported by the National Natural Science Foundation of China(Nos.51801034,52172067)the Natural Science Foundation of Guangdong Province(Nos.2021B1515020038,2020B1515020036)the Guangdong Special Support Program(No.2019BT02C629)supported by the Scientific Research Fund of Hunan Provincial Education Department(No.19C1706)the Scientific Research Fund of Chenzhou(No.zdyf201907).
文摘Thermal barrier coatings(TBCs)in gas turbine engines are used in expressly harsh environments;thus,assessing TBC integrity status is critical for safety and reliability.However,traditional periodic maintenance involves visual inspections of the TBCs,requiring the gas turbine to be decommissioned and partially dismantled.Most importantly,tiny defects or internal damages that easily cause coating failure cannot be identified.In this work,a new nondestructive evaluation(NDE)technique of TBCs based on quantum dot(QD)anion exchange is first explored internationally.By exchanging anions between the Cl ions and the CsPbBr_(3) QDs,the degrees of salt corrosion of the TBCs are evaluated.The resultant NDE technique shows that the colour of the TBCs obviously changes from green to blue,accompanied by a large blueshift(~100 nm)of the photoluminescence(PL)peak position.In addition,the relationship between the PL peak position and coating thermophysical properties indicates that the precision of this NDE technique may easily identify theμm-level of the thermal growth oxide(TGO)changes inside the TBCs.
基金Projects(2017GDAS CX-0202,2017GDAS CX-0111,2018 GDAS CX-0402) supported by Guangdong Academy of Science’ Special Project of Science and Technology Development,ChinaProject(2014B070705007) supported by Guangdong Science and Technology Plan Project,China+1 种基金Project(2016A030312015) supported by Scientific Research Fund of Guangdong Province,ChinaProject(2017A070701027) supported by Guangdong Science and Technology Program,China。
基金the financial support from Irish Research Council Project(GOIPD-2017-912)European Space Agency(4000112844/14/NL/FE)
文摘High entropy alloys(HEAs) are of great interest in the community of materials science and engineering due to their unique phase structure. They are constructed with five or more principal alloying elements in equimolar or near-equimolar ratio. Therefore, HEAs can derive their performance from multiple principal elements rather than a single element. In this work, solid-state cold spraying(CS) was applied for the first time to produce FeCoNiCrMn HEA coating. The experimental results confirm that CS can be used to produce a thick HEA coating with low porosity. As a low-temperature deposition process, CS completely retained the HEA phase structure in the coating without any phase transformation. The characterization also reveals that the grains in the CSed HEA coating had experienced significant refinement as compared to those in the as-received HEA powder due the occurrence of dynamic recrystallization at the highly deformed interparticle region. Due to the increased dislocation density and grain boundaries,CSed HEA coating was much harder than the as-received powder. The tribological study shows that the CSed FeCoNiCrMn HEA coating resulted in lower wear rate than laser cladded HEA coatings.
基金supported financially by the Sciences Platform Environment and Capacity Building Projects of GDAS(No.2019GDASYL-0502006)the Key R&D Program of Guangdong Province(No.2020B090923002)+3 种基金the Guangdong Academy of Science Projects(No.2021GDASYL-20210102005)the Guangdong Province Science and Technology Plan Projects(No.2020A1515011096)the Guangzhou Project of Science&Technology(Nos.202007020008 and 201807010030)the support from the Program of CSC(No.201801810106)。
文摘In the present work,selective laser melting(SLM)technology was utilized for manufacturing CX stainless steel samples under a series of laser parameters.The effect of laser linear energy density on the microstructure characteristics,phase distribution,crystallographic orientation and mechanical properties of these CX stainless steel samples were investigated theoretically and experimentally via scanning electron microscope(SEM),X-ray diffraction(XRD),electron backscatter diffraction(EBSD)and transmission electron microscope(TEM).Based on the systematic study,the SLM CX stainless steel sample with best surface roughness(Ra=4.05±1.8μm)and relative density(Rd=99.72%±0.22%)under the optimal linear density(η=245 J/m)can be obtained.SLM CX stainless steel was primarily constituted by a large number of fine martensite(α’phase)structures(i.e.,cell structures,cellular dendrites and blocky grains)and a small quantity of austenite(γphase)structures.The pre ferred crystallographic orientation(i.e.,<111>direction)can be determined in the XZ plane of the SLM CX sample.Furthermore,under the optimal linear energy density,the good combinations with the highest ultimate tensile strength(UTS=1068.0%±5.9%)and the best total elongation(TE=15.70%±0.26%)of the SLM CX sample can be attained.Dislocation strengthening dominates the strengthening mechanism of the SLM CX sample in as-built state.
基金financial supports from National Key Research Program (No. 2017YFB0306100)Guangdong Academy of Sciences (No. 2017GDASCX-0843)+3 种基金Guang-dong Technical Research Program (No’s. 201707010385, 2014B070706026, and 2013B061800053)Guangdong Natural Science Foundation (No. 2016A030312015)National Natural Science Foundation of China (No. 51501044)Guangzhou Technical Research Program (No. 201707010385)
文摘Quasi-columnar structure 7YSZ(yttria stabilized zirconia) thermal barrier coatings(TBCs) are prepared by plasma spray-physical vapor deposition(PS-PVD) onto pretreated and un-pretreated bond coating, respectively. An isothermal oxidation experiment of 7YSZ TBCs is carried out in the atmosphere of 950 °C in order to simulate the high-temperature oxidation process of engine blades. The isothermal oxidation process of 7YSZ thermal barrier coatings is investigated systematically by impedance spectroscopy. The electrochemical physical model and equivalent circuit of columnar 7YSZ coatings are established. Results show that the isothermal oxidation kinetic curve of columnar 7YSZ thermal barrier coatings appears to follow the parabolic law. A pretreatment of bond coating can reduce the growth rate of the thermally grown oxide(TGO) layer, restraining the initiation and propagation of microcracks between YSZ and TGO layers. The oxidation rate constants of 7YSZ coatings with pretreated and un-pretreated bond coating are 0.101×10^(-12) cm^2·s^(-1) and 0.115 × 10^(-13) cm^2 ·s^(-1), respectively. Impedance analysis shows that the content of oxygen vacancies decreases and the density increases after the TGO layer is oxidized for 150 h. In addition, shrinkage microcracks formed by sintering during the oxidation process is the main reason for an increase of the capacitance and a decrease of the resistance in the grain boundary of YSZ.
基金supported financially by the National Key Research and Development Program of China(No.2019YFA0705300)the Guangdong Special Support Program(No.2019BT02C629)+6 种基金the National Natural Science Foundation of China(No.51690160)the Shanghai Science and Technology Committee(No.19DZ1100704)the Shanghai Sailing Program(No.19YF1415900)Golden Apple Project of Baosteel Co.,Ltd(No.A19EC13500)the Guangdong Basic and Applied Basic Research Foundation(No.2019B1515120016)the Guangzhou Science and Technology Program(Nos.202002030290 and 202007020008)the GDAS’Project of Science and Technology Development(Nos.2019GDASYL-0503006 and 2020GDASYL-20200302011)。
文摘In this work,the Invar 36 alloys were manufactured using cold spray(CS)additive manufacturing technique.The systematic investigations were made on the microstructural evolution,thermal expansion and mechanical properties under as-sprayed(AS)and heat-treated(HT)conditions.XRD(X-ray diffraction)and ICP-AES(inductively coupled plasma atomic emission spectroscopy)analyses show that no phase transformation,oxidation,nor element content change have occurred.The X-ray computed tomography(XCT)exhibited a near fully dense structure with a porosity of 0.025%in the helium-produced sample under as-sprayed condition,whereas the nitrogen-produced samples produced at 5 MPa and 800℃show more irregular pore defects.He-AS sample shows a more prominent grain refinement than that of nitrogen samples due to the more extensive plastic deformation.The post heat-treatment exhibited a promoted grain growth,inter-particle diffusion,as well as the formation of annealing twins.Between25℃and 200℃,the nitrogen samples possessed lower CTE(coefficient of thermal expansion)values(1.53×10^(-6)/℃)compared with those produced by casting and laser additive manufacturing.The He-AS samples exhibited a noticeable negative CTE value between 25℃and 200℃,which may due to the significant compressive residual stress(-272 MPa)compensating its displacement with temperature increase during CTE test.The N2-HT and He-HT Invar 36 samples present a notable balance between strength and ductility.In conclusion,the CS technique can be considered as a potential method to produce the Invar36 component with high thermal and mechanical performance.
基金financial supports from National Natural Science Foundation of China(No.51801034,No.51771059)Guangdong Academy of Sciences Program(No.2020GDASYL-20200104030,No.2018GDASCX-0402,No.2017GDASCX-0202,No.2017GDASCX-0111)+2 种基金Guangdong Technical Research Program(No.2017B090916002,No.2017A070701027,No.2014B07075007)Guangdong Natural Science Foundation(No.2016A030312015,No.2017A030310315)Guangzhou Technical Research Program(No.201906010015,No.201707010455,No.201707010385).
文摘Plasma spray-physical vapor deposition(i.e.,PS-PVD)is a promising method for obtaining advanced environmental barrier coatings(EBCs).The EBCs must meet some requirements in the application,in which the thermal cycle performance affects the service lifetime.The preparation of artificial vertical cracks in Yb_(2)SiO_(5) coatings is an effective approach for meeting the requirements above because vertical cracks provide a strain tolerance.To clarify the formation mechanism of vertical cracks during the PSPVD,the effects of coating thickness and substrate temperature on the formation of vertical cracks were investigated.In addition,the interactions of spray powder and plasma flame during coating deposition were also characterized by optical spectroscopy.It is indicated that vertical cracks are formed due to a thermal expansion mismatch between Yb_(2)SiO_(5) and mullite coating,transient cooling after deposition and the nucleation of evaporated Yb_(2)SiO_(5) as well.
基金This work is supported by Science and Technology Project of Guangdong Province (2014B050502008), Science and Technology plan projects of Guangdong Province (2017A070702016, 2017A070701027), Guangzhou Science and Technology Program key projects (201510010095), Natural Science Foundation of Guangdong Province (2016A030312015), the National Natural Science Foundation for Youth (51501044). and 111 Project of China (B16020).
文摘Inspired by the coupling phenomena in biological systems, to improve the solid particle erosion resistance of Thermal Barrier Coatings (TBCs), different kinds of bionic units were made on the coating surfaces using Bionic Coupled Laser Remelting (BCLR) process. The NiCoCrAlYTa/ZrO2-7wt%Y2O3 double-layer structured TBCs were prepared by air plasma spraying. The microstructure, microhardness and phase composition of the as-sprayed and bionic specimens were examined. The solid particle erosion behaviors of bionic specimens as function of bionic unit shape were investigated. The results indicated that the bionic specimens had better erosion resistance than the as-sprayed specimen. The specimen with striation and grid bionic units had the better erosion resistance, while the dot showed the worse. The bionic units were characterized by the dense columnar crystal structure and the high hardness, which are the main reasons for improving the erosion resistance. Under the synergistic action of the shear stress and normal stress on the protrusive coating surface, the erosion failure of the as-sprayed TBCs was proved to be the fracture and spallation of the splats. By contrast, the spallation of segmented bionic unit occurred in the overlapping area between the adjacent laser irradiation, and the erosive unit surface presented the clear and deep furrows, which revealed that the erosion failure mechanism of bionic TBCs was dominated by brittle and some ductile erosion. These results showed more opportunities for bionic application in improving the solid particle erosion resistance of components in the windy and sandy environment.
基金supported by the Fund Project of the GDAS Special Project of Science and Technology Development,Guangdong Academy of Sciences Program(No.2020GDASYL-20200104030)the Innovation Project of Guangxi University of Science and Technology Graduate Education(No.YCSW2020217)+2 种基金Guangxi Innovation Driven Development Project(No.AA18242036-2)Innovation Team Project of Guangxi University of Science and Technology(No.3)the Fund Project of the Key Lab of Guangdong for Modern Surface Engineering Technology(No.2018KFKT01)。
文摘A quasi-solid-state lithium battery is assembled by plasma sprayed amorphous Li_(4)Ti_(5)O_(12) to provide the outstanding electrochemical stability and better normal interface contact.Scanning Electron Microscope(SEM),Scanning Transmission Electron Microscopy(STEM),Transmission Electron Microscopy(TEM),and Energy Dispersive Spectrometer(EDS)were used to analyze the structural evolution and performance of plasma sprayed amorphous LTO electrode and ceramic/polymer composite electrolyte before and after electrochemical experiments.By comparing the electrochemical performance of the amorphous LTO electrode and the traditional LTO electrode,the electrochemical behavior of different electrodes is studied.The results show that plasma spraying can prepare an amorphous LTO electrode coating of about 8μm.After 200 electrochemical cycles,the structure of the electrode evolved,and the inside of the electrode fractured and cracks expanded,because of recrystallization at the interface between the rich fluorine compounds and the amorphous LTO electrode.Similarly,the ceramic/polymer composite electrolyte has undergone structural evolution after 200 test cycles.The electrochemical cycle results show that the cycle stability,capacity retention rate,coulomb efficiency,and internal impedance of amorphous LTO electrode are better than traditional LTO electrode.This innovative and facile quasi-solid-state strategy is aimed to promote the intrinsic safety and stability of working lithium battery,shedding light on the development of next-generation high-performance solid-state lithium batteries.
基金financially supported by Guangdong Natural Science Foundation (No.2016A030312015)the Science and Technology Cooperation Project of Guangdong Province (No.2013B050800027)the Science and Technology Cooperation Project of Guangzhou (No.201508030001)。
文摘7 YSZ coating was prepared by plasma sprayphysical vapor deposition(PS-PVD) technique based on a specific experimental design.The microstructure and deposition properties of 7 YSZ coating along the radius of plasma jet were investigated in detail.Results show that the coating presents regional characteristic in the radial direction,which could be divided into three typical zones:In Zone Ⅰ,the coating is all composed of columnar structures with cauliflower structure,and the coating properties including the surface roughness and deposition efficiency(DE) are almost stable;in Zone Ⅲ,the coating is made up of solid particles,droplet and gas phase mixed without columnar structures;Zone Ⅱ is between Zone Ⅰ and ZoneⅢ, in which there are columns with domed top and small particles.Based on experiment results,a model on the state and distribution of particles in plasma jet was proposed to clarify the regional characteristic.This study is helpful to comprehend and control coatings deposition by PS-PVD technique.
基金supported financially by the National Natural Science Foundation of China(No.51875443)the Guangdong Basic and Applied Basic Research Foundation(Nos.2019B1515120016 and 202002030290)+3 种基金the Shaanxi Co-Innovation Projects(No.2015KTTSGY03-03)the Shaanxi Natural Science Foundation(No.2015JQ5200)the Open Project from The Key Lab of Guangdong for Modern Surface Engineering Technologyfinancial support by Guangdong Academy of Sciences’Project of Constructing First-class Domestic Research Institutions(Nos.2019GDASYL-0503006,2020GDASYL-20200302011)。
文摘The oxide scale present on the feedstock particles is critical for inter-particle bond formation in the cold spray(CS)coating process,therefore,oxide scale break-up is a prerequisite for clean metallic contact which greatly improves the quality of inter-particle bonding within the deposited coating.In general,a spray powder which contains a thicker oxide scale on its surface(i.e.,powders having high oxygen content)requires a higher critical particle velocity for coating formation,which also lowers the deposition efficiency(DE)making the whole process a challenging task.In this work,it is reported for the first time that an artificially oxidized copper(Cu)powder containing a high oxygen content of 0.81 wt.%with a thick surface oxide scale of 0.71μm.,can help achieve an astonishing increment in DE.A transition of surficial oxide scale evolution starting with crack initiations followed by segmenting to peeling-off was observed during the high velocity particle impact of the particles,which helps in achieving an astounding increment in DE.Single-particle deposit observations revealed that the thick oxide scale peels off from most of the sprayed powder surfaces during the high-velocity impact,which leaves a clean metallic surface on the deposited particle.This makes the successive particles to bond easily and thus leads to a higher DE.Further,owning to the peeling-off of the oxide scale from the feedstock particles,very few discontinuous oxide scale segments are retained at inter-particle boundaries ensuring a high electrical conductivity within the resulting deposit.Dependency of the oxide scale threshold thickness for peeling-off during the high velocity particle impact was also investigated.
基金financially supported by the National Key Research and Development Program of China(No.2016YFB0301101)the Hunan Provincial Science and Technology Program of China(No.2017RS3002)-Huxiang Youth Talent Plan+1 种基金the Youth Talent Project of Innovation-driven Plan at Central South University(No.2019XZ027)the support from the Fundamental Research Funds for the Central Universities of Central South University(No.2018zzts129)。
文摘In this work,a novel computational framework for establishment of atomic mobility database directly from the experimental composition profiles and its uncertainty quantification was developed by merging the Bayesian inference with the Markov chain Monte Carlo algorithm into the latest version of the Hit DIC software.By treating the simulation of composition profiles with the composition-dependent coefficients as the forward problem,the inverse coefficient problem that provides the potential way to compute the atomic mobilities directly from composition profiles can be postulated.The values and uncertainties of the atomic mobility parameters of interest were assessed by means of Bayesian inference,where the composition profiles were consumed directly.Benchmark tests that consider the number of diffusion couples and the noise levels were conducted.Practical application of the current framework in determination of atomic mobility descriptions of fcc Ni-Ta and Ni-Al-Ta alloys was performed.Further discussion about the results of the benchmark tests and practical study case indicated that the present computational framework together with numbers of composition profiles from the multiple diffusion couples can help to establish the high-quality atomic mobility database of the target multicomponent alloys.
基金financial supports from National Key Research Program (2017YFB0306100)Guangdong Academy of Sciences (No. 2017GDASCX-0843)+3 种基金Guangdong Technical Research Program (Nos. 201707010385, 2014B070706026, 2013B061800053)Guangdong Natural Science Foundation (No. 2016A030312015)National Natural Science Foundation of China (No. 51501044)Guangzhou Technical Research Program (No. 201707010385)
文摘Plasma spray-physical vapor deposition(PS-PVD) as a novel coating process based on low-pressure plasma spray(LPPS) has been significantly used for thermal barrier coatings(TBCs).A coating can be deposited from liquid splats, nano-sized clusters, and the vapor phase forming different structured coatings, which shows obvious advantages in contrast to conventional technologies like atmospheric plasma spray(APS) and electron beam-physical vapor deposition(EBPVD). In addition, it can be used to produce thin, dense, and porous ceramic coatings for special applications because of its special characteristics, such as high power, very low pressure, etc. These provide new opportunities to obtain different advanced microstructures, thus to meet the growing requirements of modern functional coatings. In this work, focusing on exploiting the potential of gas-phase deposition from PS-PVD, a series of 7 YSZ coating experiments with various process conditions was performed in order to better understand the deposition process in PS-PVD, where coatings were deposited on different substrates including graphite and zirconia. Meanwhile, various substrate temperatures were investigated for the same substrate. As a result, a deposition mechanism of heterogeneous nucleation has been presented showing that surface energy is an important influencing factor for coating structures. Besides, undercooling of the interface between substrate and vapor phase plays an important role in coating structures.
基金the financial support from National Natural Science Foundation of China(51771059)R&D Program in Key Fields of Guangdong Province of China(2019B010936001)+2 种基金National Science and Technology Major Project of China(2017-VI-0010-0081)Science and Technology Project of Guangdong Province of China(2017A070701027,2014B070705007)Sciences Project of Guangdong Academy of China(2019GDASYL-0104022)。
文摘The YSZ coatings are prepared by the plasma spray-physical vapor deposition(PS-PVD)technology based on a specific experimental design.The structure,thickness and growth angle of YSZ coatings on the entire circumferential surface of the cylindrical sample are studied.The results indicated that the structure,thickness and deflection growth angle of YSZ coatings are related to the orientation of deposition location.The numerical simulation of the multiphase mixed fluid near the substrate is carried out and the deposition regularity and mechanism of YSZ coatings prepared by PS-PVD is deduced.The growth rate is related to the local characteristics of the plasma flow field,and is directly proportional to the field pressure and inversely proportional to the field velocity.The growth angle of the coating is generally affected by the flow direction of the plasma jet.Especially,the normal component of velocity vector,V_(norm),mainly affects the speed at which the coating grows vertically upwards.The tangential component of velocity vector,V_(tan),determines the degree that the coating growth direction deviates from the vertical direction.When V_(tan)≠0,the coating forms a fine column with a certain deflection angle and finally develops into an oblique columnar structure.
基金supported by the National Natural Science Foundation of China (51772135)the Ministry of Education of China (6141A02022516)+4 种基金the Fundamental Research Funds for the Central Universities (11619103)China Postdoctoral Science Foundation (2019M663376)Guangdong Province Higher Vocational Colleges & Schools Pearl River Scholar Funded Scheme (2017)the Natural Science Foundation of Guangdong Province, China (2017A020215135 and 2018A030310659)the Science and Technology Program of Guangzhou, China (201804010432)。
基金financially supported by the National Key Research and Development Program of China(No.2017YFB0306100)the National Natural Science Foundation of China(No.51771059)+2 种基金the Natural Science Foundation of Hunan Province(No.2018JJ2524)the International Scientific Technological Cooperation Projects of China(Nos.2015DFR50580 and 2013DFA31440)the Science and Technology Planning Project of Guangdong Province(No.2017A070701027)。
文摘Spherical Gd_(2)Zr_(2)O_(7)hollow powders with a mean size of 8.8μm were fabricated as feedstock for thermal barrier coatings(TBCs)by spray-drying.The single-ceramic-layer(SCL)Gd_(2)Zr_(2)O_(7)TBCs and double-ceramic-layer(DCL)Gd_(2)Zr_(2)O_(7)/YSZ TBCs with quasicolumnar structure were successfully fabricated by plasma spray-physical vapor deposition(PS-PVD).Tensile and water-quenching tests were applied to evaluate TBCs performances.The results show that adhesion strength of SCL Gd_(2)Zr_(2)O_(7)TBCs and DCL Gd_(2)Zr_(2)O_(7)/YSZ TBCs is36.5 MPa and 15.4 MPa,respectively.The delamination of SCL Gd_(2)Zr_(2)O_(7)TBCs and DCL Gd_(2)Zr_(2)O_(7)/YSZ TBCs in the tensile test takes place at the middle and bottom of Gd_(2)Zr_(2)O_(7)layer,respectively,due to relatively lower fracture toughness of Gd_(2)Zr_(2)O_(7)layer.After 40 cycles of water-quenching test,DCL Gd_(2)Zr_(2)O_(7)/YSZ TBC surface keeps relatively intact,while SCL Gd_(2)Zr_(2)O_(7)TBC surface shows 20%visible destroyed regions,which demonstrates that DCL Gd_(2)Zr_(2)O_(7)/YSZ TBCs have a better thermal shock resistance than SCL Gd_(2)Zr_(2)O_(7)TBCs.The cracks in the SCL system propagate near thermally grown oxide(TGO)due to thermal mismatch and TGO growing stress,while cracks in the DCL system propagate in the Gd_(2)Zr_(2)O_(7)layer due to its relatively lower fracture toughness.
文摘The narrow bandgap of the low-energy near-infrared(NIR)polymer would lead to overlap between adjacent energy levels,which is a major barrier to the preparation of Vis-NIR polymer bulk hetero-junction(BHJ)photodetectors with small responsivity and photocurrent.In this study,a high-performance lateral inorganic-organic hybrid photodetector was constructed to eliminate this barrier by combining GaN nanowires(GaN-NWs)with PDPP3T:PC61BM-based BHJ.In stage one,high-quality GaN-NWs were synthesized by the catalyst-free CVD method.The mechanism for controlling GaN-NWs morphology by adjusting the NH3 flow rate was revealed.In stage two,the GaN-NWs with large electron mobility were used to accelerate the transfer of photogenerated carriers in the BHJ layer.Finally,compared with the BHJ device,the BHJ/GaN device demonstrated obvious improvements in responsivity and photocurrent at the wavelength between 400 and 1000 nm.The responsivity and photocurrent increased over 20-fold at the NIR band of 800e900 nm.Besides,owing to the energy level gradient effect,the BHJ/GaN device has a response speed of 7.8/<5.0 ms,which increases over three orders of magnitude than that of the GaN-NWs-based device(tr/tf:7.1/10.9 s).Therefore,the novel device structure proposed in this work holds great potential for preparing high-performance Vis-NIR photodetectors.