Microstructural stability of a nickel base single crystal alloy DD8 has been investigated.Standard heat treated specimen showed good microstructural stability at 950℃.While under the as-cast condition,a kind of rod-l...Microstructural stability of a nickel base single crystal alloy DD8 has been investigated.Standard heat treated specimen showed good microstructural stability at 950℃.While under the as-cast condition,a kind of rod-like phase precipitated in the interdendritic region of as-cast specimen during thermal exposure.The phase,which has bcc structure,was enriched with Cr.Thermo-calc also predicted precipitation of a bcc phase at around 950℃.The Cr-rich bcc phase was considered asα-Cr and formed due to the segregation of Cr under the as-cast condition.展开更多
Microstructural evolution during directional solidification (DS) of Ni-base superalloy IN792+Hf has been investigated with an emphasis on theγ′precipitates and MC-type carbides.The quantitative image analyses rev...Microstructural evolution during directional solidification (DS) of Ni-base superalloy IN792+Hf has been investigated with an emphasis on theγ′precipitates and MC-type carbides.The quantitative image analyses revealed that the increase in the solidification rate up to 100μm/s at constant thermal gradient of 178 K/cm resulted in a fine and uniform distribution ofγ′precipitates.The relationship between the as-castγ′size and cooling rate was also determined for DS IN792+Hf.In the mean time,the MC carbide size was found to be dependent both on the solidification rate and the S/L interface morphology while the area fraction of MC carbide was significantly influenced by the S/L interface morphology.展开更多
The effects of alloying elements(Co,Cr,Mo,W,Al,Ti,and Ta)on the oxidation resistance of Ni-(0-15)Co-(8-15)Cr-(0-5)Mo-(0-10)W-(3-8)Al-(0-5)Ti-(0-10)Ta-0.1 C-0.01 B alloys were studied.The sample compositions were desig...The effects of alloying elements(Co,Cr,Mo,W,Al,Ti,and Ta)on the oxidation resistance of Ni-(0-15)Co-(8-15)Cr-(0-5)Mo-(0-10)W-(3-8)Al-(0-5)Ti-(0-10)Ta-0.1 C-0.01 B alloys were studied.The sample compositions were designed by the Box-Behnken method of design of experiments(DOE).The alloying elements show complicated effects on the mass gain due to oxidation,depending on the alloy composition.Al reduces the mass gain largely.The other elements except Al do not appear to exert a strong effect on the oxidation rate on average,but their influences are shown clearly in the alloys with a low Al content.Co,W,and Ta reduce the oxidation rate,while Cr,Mo,and Ti promote oxidation.Ta is the most effective element in reducing the oxidation rate of the alloy with a low Al concentration.It is confirmed that a continuous Al2O3 layer is essentially required for high oxidation resistance.The oxide scale of easily oxidized alloys has various oxides such as NiCr2O4,NiAl2O4,NiO,Cr2O3,CrTaO4,and TiO2.展开更多
基金Project(2011-0030058) supported by the National Research Foundation of Korea(NRF) Funded by the Korean Government(MSIP)Project(20134030200220) supported by the Human Resources Development Program of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)Funded by the Korea Government Ministry of Trade,Industry and Energy and by the Korea Institute of Materials Science(KIMS) in 2013
文摘Microstructural stability of a nickel base single crystal alloy DD8 has been investigated.Standard heat treated specimen showed good microstructural stability at 950℃.While under the as-cast condition,a kind of rod-like phase precipitated in the interdendritic region of as-cast specimen during thermal exposure.The phase,which has bcc structure,was enriched with Cr.Thermo-calc also predicted precipitation of a bcc phase at around 950℃.The Cr-rich bcc phase was considered asα-Cr and formed due to the segregation of Cr under the as-cast condition.
文摘Microstructural evolution during directional solidification (DS) of Ni-base superalloy IN792+Hf has been investigated with an emphasis on theγ′precipitates and MC-type carbides.The quantitative image analyses revealed that the increase in the solidification rate up to 100μm/s at constant thermal gradient of 178 K/cm resulted in a fine and uniform distribution ofγ′precipitates.The relationship between the as-castγ′size and cooling rate was also determined for DS IN792+Hf.In the mean time,the MC carbide size was found to be dependent both on the solidification rate and the S/L interface morphology while the area fraction of MC carbide was significantly influenced by the S/L interface morphology.
基金Project(2011-0030058) supported by the National Research Foundation of Korea(NRF)Project(20134030200220) supported by the Human Resources Development Program of the Korea Institute of Energy Technology Evaluation,Korea+1 种基金Project supported by the Planning (KETEP) Grant Funded by the Korea Government Ministry of Trade,Industry and Energy and POSCO 2012,KoreaProject(10043795) supported by the Technology Innovation Program of the Ministry of Knowledge Economy Korea
基金financially supported by the Fundamental R&D Program for Core Technology of Materials(No.10041233)the Human Resources Program in Energy Technology of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)(No.20174030201620)。
文摘The effects of alloying elements(Co,Cr,Mo,W,Al,Ti,and Ta)on the oxidation resistance of Ni-(0-15)Co-(8-15)Cr-(0-5)Mo-(0-10)W-(3-8)Al-(0-5)Ti-(0-10)Ta-0.1 C-0.01 B alloys were studied.The sample compositions were designed by the Box-Behnken method of design of experiments(DOE).The alloying elements show complicated effects on the mass gain due to oxidation,depending on the alloy composition.Al reduces the mass gain largely.The other elements except Al do not appear to exert a strong effect on the oxidation rate on average,but their influences are shown clearly in the alloys with a low Al content.Co,W,and Ta reduce the oxidation rate,while Cr,Mo,and Ti promote oxidation.Ta is the most effective element in reducing the oxidation rate of the alloy with a low Al concentration.It is confirmed that a continuous Al2O3 layer is essentially required for high oxidation resistance.The oxide scale of easily oxidized alloys has various oxides such as NiCr2O4,NiAl2O4,NiO,Cr2O3,CrTaO4,and TiO2.