Prevalence of Malnutrition and Anaemia in Children ≤ 5 Years of Age in Some Conflict Hit Areas of Meme Division of the South West Region of Cameroon

Malnutrition refers to the deficiency, imbalances, or excesses in a person’s intake of energy or nutrients [1]. Khan defines anaemia as below level of Haemoglobin in red blood shown by a lower number of functioning red blood cells [2]. The crisis in the North West and South West Regions of Cameroon has led to several negative effects on children’s living conditions. There has been an increase in malnutrition and anaemia in the South West Region and Kumba in particular. The main objective of this study was “to examine the prevalence of malnutrition and anaemia in children ≤ 5 years of age in some conflict-hit areas of Meme Division”. A descriptive cross-sectional study was conducted in 2023 from March to June. We recruited 200 children ≤ 5 years into the study from three hospitals. The regional hospital annex in Kumba, Presbyterian General Hospital Kumba and the Ntam Hospital in Kumba. Socio-demographic factors were assessed using questionnaire, nutritional status was assessed by the use anthropometric measurements and an auto haematology analyser was used to determine anaemia. The overall prevalence of malnutrition in the study area was 40.5%. The prevalence of malnutrition varied significantly (P < 0.001) with the study sites. The overall prevalence of anaemia in the study area was 70.5%. The prevalence of anaemia was not significantly associated with the study sites. The prevalence of Malnutrition and Anaemia in children ≤ 5 years of age is very high in the Kumba municipalities. This could be attributed to the ongoing crisis which has caused a lot of social migrations from rural areas to Urban areas which are safer.

Tree Species Composition and Diversity in the Riparian Forest of Lake Barombi Kotto, Cameroon

Tree species composition and diversity were investigated in the riparian forest around Lake Barombi Kotto, Cameroon. This study aimed at determining the tree species composition, population structure, and providing evidence of anthropogenic disturbances in the riparian forest of Lake Barombi Kotto. The objectives were to determine the tree species composition and diversity in the riparian forest around Lake Barombi Kotto, to elucidate the forest structure and to document the anthropogenic disturbances in this forest. Five plots were laid within which the tree enumeration and measurement of dbh were carried out. Trees were identified using scientific identification keys in the Flora of West Africa. Disturbance scores were given to each site by qualitatively assessing various disturbances. A total of 340 trees belonging to 70 plant species, 63 genera and 28 plant families were enumerated. Shannon-Wiener diversity varied across sites, with the highest value (H = 3.45) recorded in Tung and the lowest (H = 2.21) in Malenda. Population structure differed across sites, the largest stand basal area of 43.78 m2/ha was recorded in Bondokombo while the smallest (2.15 m2/ha) was recorded in the Sacred Island. Cecropia peltata L., Pseudospondias macrocarpa Oliv. Pierre and Ceiba pentandra (L.) Gaertn had the largest basal areas across the different sites. Species rich families were Malvaceae (9 species), Fabaceae (9 species), Annonaceae (4 species), and Anacardiaceae (4). This study shows that, there is a high tree species diversity in the protected forest (Tung) but the other unprotected sites are highly disturbed by anthropogenic activities. There is need to develop and enhance existing management policies for this riparian forest, especially by replanting the cut trees and creating a protected riparian buffer to conserve its floristic diversity and ecological functions.

Exergy Analysis of a Double-Effect Solar Absorption Refrigeration System in Ngaoundere

Solar energy is replacing more and more traditional sources of energy because of the fact that it’s also fighting about global warming. This study is based on exergy analysis of a double-effect series flow absorption refrigeration system powered by solar energy in Ngaoundere. The simulation is done on the basis of a half hourly analysis for the first time, from 6.30 AM to 6.30 PM, using water-lithium bromide as working pair. The main parameters for the performance of an absorption cycle, which are the COP and the ECOP, have been analyzed and the results show that this two parameters increase while increasing the temperature of the main generator. The exergy loss of each component of the system and the total exergy loss of the system have been analyzed and their effectiveness calculated, using the first and second law of thermodynamics. The highest exergy loss occurs in the main generator GI and in the absorber, making these components more important in an absorption cycle. This analysis is based on a mathematical model using FORTRAN?language. The results obtained may be useful for the optimization of solar absorption refrigeration systems.

Simulations of the Performance of Maximum Power Point Tracking Algorithms Based on Experimental Data According to the Topologies of DC-DC Converters

Maximum Power Point Tracking (MPPT) algorithms are now widely used in PV systems independently of the weather conditions. In function of the application, a DC-DC converter topology is chosen without any previous performance test under normal weather conditions. This paper proposes an experimental evaluation of MPPT algorithms according to DC-DC converters topologies, under normal operation conditions. Four widely used MPPT algorithms i.e. Perturb and Observe (P & O), Hill Climbing (HC), Fixed step Increment of Conductance (INCF) and Variable step Increment of Conductance (INCV) are implemented using two topologies of DC-DC converters i.e. buck and boost converters. As input variables to the PV systems, recorded irradiance and temperature, and extracted photovoltaic parameters (ideality factor, series resistance and reverse saturation current) were used. The obtained results show that buck converter has a lot of power losses when controlled by each of the four MPPT algorithms. Meanwhile, boost converter presents a stable output power during the whole day. Once more, the results show that INCV algorithm has the best performance.

Assessment of Sustainability Indicators of Thermoelectric Power Generation in Cameroon Using Exergetic Analysis Tools

In this paper, we evaluate the performance and sustainability indicators of various thermal power generation technologies in Cameroon using the exergy analysis tools. For this purpose, on the basis of data from the International Energy Agency (IEA) for Cameroon corresponding to the period from 2006 to 2014, we calculated the average energy and exergy efficiencies of each electricity generation technology from thermal sources. The average values of the exergy efficiencies obtained are respectively 28.97% for the LFO plants, 30.94% for the HFO plants, 34.66% for the biofuel plants and 36.67% for the gas-fired plants. The average sustainability indexes for each of the technologies are determined and values range from 1.56 for LFO plants to 2.12 for biofuel plants. The improvement potentials of each technology are calculated in order to identify the tracks of increase of their efficiency. Average values range from 165.57 GWh for biofuel plants to 1301.77 GWh for LFO plants. The results of this study should enable the development of productive and applicable planning for future energy policies, in particular for the electricity sector in Cameroon.

Integrated Soil Fertility Management: Impact of <i>Mucuna</i>and <i>Tithonia</i>Biomass on Tomato (<i>Lycopersicon esculentum</i>L.) Performance in Smallholder Farming Systems

Many views, paradigms and concepts have been advocated in recent decades on soil fertility and soil conservation across the globe in order to provide sustainable solutions to the rising food and nutrition insecurity while preserving the natural resource base. Meanwhile, food and nutrition security in Sub-Saharan Africa (SSA) is mainly achieved through smallholder farming systems that are characterized by poor and declining soil fertility, which often leads to low crop yields and low income. Hence, a field trial was established to evaluate the impact of integrated soil fertility management (ISFM) practices on tomato yield and the farm-scale income in smallholder farming systems. The ISFM trial comprised a control with no input, mineral fertilizer, and organic treatments comprising sole Mucuna and Tithonia biomasses as well as their combination (Mucuna + Tithonia). Generally, tomato performance was better with organic plant biomass amendments, with significantly higher (P Mucuna + Tithonia and sole Tithonia, followed by sole Mucuna and mineral fertilizer compared to the control. Meanwhile in comparison to the control, Mucuna + Tithonia and sole Tithonia recorded 3.5 and 3.4 t ha-1 more yield, respectively, which was about twice the additional yield for sole Mucuna and mineral fertilizer with 1.8 and 1.5 t ha-1, respectively (Tukey’s HSD, P Mucuna + Tithonia and sole Tithonia, followed by sole Mucuna and mineral fertilizer, as compared to the control (Tukey’s HSD, P P P Mucuna + Tithonia biomass materials or their sole applications as basal mulch to improve tomato production. Thus, these organic amendments could be an alternative and sustainable integrated soil fertility management strategy to boost tomato production and farm-scale income without jeopardizing the sustainability of the environment. However, this requires more efforts to adapt the different ISFM techniques to the specific needs of smallholder farmers, coupled with effective dissemination strategies that facilitate knowledge transfer and technology adoption.

Exergy Analysis of a Solar Absorption Refrigeration System in Ngaoundere

In this study, the first and second laws of thermodynamics are used to analyze the performance of a single-stage absorption refrigeration system powered by solar energy. The working pair used in this study is LiBr-H2O where water (H2O) is the refrigerant and the lithium bromide (LiBr) is the absorbent. A mathematical model based on exergy analysis is applied to analyse the system performance. Temperature, enthalpy, entropy, mass flow rate and exergy loss of each component including evacuated tube solar collector are evaluated. Furthermore, the overall coefficient of performance (COPcooling) and the overall exergetic coefficient of performance (ECOPcooling) of the solar absorption system (absorption system coupled to an evacuated tube solar collector) for cooling purpose are calculated from the thermodynamic properties of the working fluids under weather conditions of Ngaoundere city, Cameroon. The calculations were done on the basis of a half hourly analysis from 6:30 AM to 6:30 PM. The results were compared and they show that the exergy destruction highly occurs in the generator and the solar collector. The simulation results can be used for the thermodynamics optimization of solar absorption refrigeration systems.

Characterisation of Early Age Deformations in Cement Paste: Case of Chemical and Autogenous Shrinkage

Concrete is commonly seen as a durable and long-lasting construction material. However, the long-term performance of a concrete structure can be greatly compromised by early-age cracking. This work is an experimental contribution to study early age deformations of cement paste. Its aim is, firstly, to develop an experimental dispositive for assessing chemical and autogenous shrinkage, and secondly, to measure these volumetric deformations in cement paste. The setup was done following the gravimetric method of measurement, which exploits the Archimedes’ principle. It is made up of an electronic balance, a data accusation unit, a temperature control unit and a buoyancy bath. Investigations were done on Portland cement (CPA-CEM II) at the following W/C ratios: 0.25, 0.3, 0.35, 0.4 and 0.5. It was noticed that the water-cement ratio does not influence the magnitude of the chemical shrinkage in a significant manner but had a kinetic effect;a lower W/C induces a faster rate of chemical shrinkage. Autogenous shrinkage was discovered to be highly inversely proportional to the W/C and was also noticed to be in a function of chemical shrinkage within the first 2 to 4 hours when the paste was still liquid.

Numerical Solution of 2-D Diffusion Problems Using Discrete Duality Finite Volume Method on General Boundary Conditions

In this paper, we present a discrete duality finite volume (DDFV) method for 2-D flow problems in nonhomogeneous anisotropic porous media under diverse boundary conditions. We use the discrete gradient defined in diamond cells to compute the fluxes. We focus on the case of Dirichlet, full Neumann and periodic boundary conditions. Taking into account the periodicity is the main new ingredient with respect to our recent works. We explain the procedures step by step, for numerical solutions. We develop a matlab code for algebraic equations. Numerical tests were provided to confirm our theoretical results.

Crystal Packing Studies, Thermal Properties and Hirshfeld Surface Analysis in the Zn(II) Complex of 3-Aminopyridine with Thiocyanate as Co-Ligand

Reaction of zinc acetate, potassium thiocyanate and the ligand 3-ampy gave the discrete tetrahedral complex [Zn(NCS)2(3-ampy)2] in which 3-ampy chelates in a monodentate fashion through its pyridine-N atom. It was characterized by single crystal X-ray diffraction, infrared, and elemental analysis. Density Functional Theory calculations were performed in order to gain insights into the role of weak molecular interactions in the complex that influence the self-assembly process and crystal packing. X---H (X = H, C, N and S) inter-actions. S-H interactions (30.2%) were found to be the main interactions that hold the molecules in the crystal structure. Furthermore, the thermolysis of the complex was studied in order to evaluate whether it was suitable as a precursor for zinc sulphide.