Effects of sediment load on the abrasion of soil aggregate and hydraulic parameters in experimental overland flow

The breakdown of soil aggregates under rainfall and their abrasion in overland flow are important processes in water erosion due to the production of more fine and transportable particles and,the subsequent significant effect on the erosion intensity.Currently,little is known about the effects of sediment load on the soil aggregate abrasion and the relationship of this abrasion with some related hydraulic parameters.Here,the potential effects of sediment load on soil aggregate abrasion and hydraulic parameters in overland flow were investigated through a series of experiments in a 3.8-m-long hydraulic flume at the slope gradients of 8.7 and 26.8%,unit flow discharges from 2×10^-3 to 6×10^-3 m^2 s^-1,and the sediment concentration from 0 to 110 kg m-3.All the aggregates from Ultisols developed Quaternary red clay,Central China.The results indicated that discharge had the most significant(P<0.01)effect on the aggregates abrasion with the contributions of 58.76 and 60.34%,followed by sediment feed rate,with contributions of 39.66 and 34.12%at the slope gradients of 8.7 and 26.8%,respectively.The abrasion degree of aggregates was found to increase as a power function of the sediment concentration.Meanwhile,the flow depth,friction factor,and shear stress increased as a power function along with the increase of sediment concentration at different slope gradients and discharges.Reynolds number was obviously affected by sediment concentration and it decreased as sediment concentration increased.The ratio of the residual weight to the initial weight of soil aggregates(Wr/Wi)was found to increase as the linear function with an increasing flow depth(P=0.008)or Reynolds number(P=0.002)in the sediment-laden flow.The Wr/Wi values followed a power function decrease with increasing friction factor or shear stress in the sediment-laden flow,indicating that friction factor is the best hydraulic parameter for prediction of soil aggregate abrasion under different sediment load conditions.The information regarding the soil aggregate abrasion under various sediment load conditions can facilitate soil process-based erosion modeling.

Simulation-optimization model of reservoir operation based on target storage curves

This paper proposes a new storage allocation rule based on target storage curves. Joint operating rules are also proposed to solve the operation problems of a multi-reservoir system with joint demands and water transfer-supply projects. The joint operating rules include a water diversion rule to determine the amount of diverted water in a period, a hedging rule based on an aggregated reservoir to determine the total release from the system, and a storage allocation rule to specify the release from each reservoir. A simulation-optimization model was established to optimize the key points of the water diversion curves, the hedging rule curves, and the target storage curves using the improved particle swarm optimization （IPSO） algorithm. The multi-reservoir water supply system located in Liaoning Province, China, including a water transfer-supply project, was employed as a case study to verify the effectiveness of the proposed join operating rules and target storage curves. The results indicate that the proposed operating rules are suitable for the complex system. The storage allocation rule based on target storage curves shows an improved performance with regard to system storage distribution.